Difference between Quote number and Quote header id
hi all,
i am new to the E-biz suite and i had a doubt. what is the exact difference between Quote number and quote header id. i know they are different but cannot make out exactly. as both are defined as "uniquely identifies the quote".
thanks in advance,
Basavraj
Hi Basavraj,
Quote Number is the value that the end user will see from the screens or on any printed document.
Quote Header Id is the identifier that is user in the back end to uniquely identify the record and link for example the header table to the line table.
In the line table you will only see the Quote Header Id column, not the Quote number column.
Hope this answers your question,
Regards,
J.
Similar Messages
-
Difference between datatype NUMBER and NUMBER(38)
Difference between datatype NUMBER and NUMBER(38)
From
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/sql_elements001.htm#i54330
NUMBER Datatype
The NUMBER datatype stores zero as well as positive and negative fixed numbers with absolute values from 1.0 x 10-130 to (but not including) 1.0 x 10126. If you specify an arithmetic expression whose value has an absolute value greater than or equal to 1.0 x 10126, then Oracle returns an error. Each NUMBER value requires from 1 to 22 bytes.
Specify a fixed-point number using the following form:
NUMBER(p,s)
where:
p is the precision, or the total number of significant decimal digits, where the most significant digit is the left-most nonzero digit, and the least significant digit is the right-most known digit. Oracle guarantees the portability of numbers with precision of up to 20 base-100 digits, which is equivalent to 39 or 40 decimal digits depending on the position of the decimal point.
s is the scale, or the number of digits from the decimal point to the least significant digit. The scale can range from -84 to 127.
Positive scale is the number of significant digits to the right of the decimal point to and including the least significant digit.
Negative scale is the number of significant digits to the left of the decimal point, to but not including the least significant digit. For negative scale the least significant digit is on the left side of the decimal point, because the actual data is rounded to the specified number of places to the left of the decimal point. For example, a specification of (10,-2) means to round to hundreds.
Scale can be greater than precision, most commonly when e notation is used. When scale is greater than precision, the precision specifies the maximum number of significant digits to the right of the decimal point. For example, a column defined as NUMBER(4,5) requires a zero for the first digit after the decimal point and rounds all values past the fifth digit after the decimal point.
It is good practice to specify the scale and precision of a fixed-point number column for extra integrity checking on input. Specifying scale and precision does not force all values to a fixed length. If a value exceeds the precision, then Oracle returns an error. If a value exceeds the scale, then Oracle rounds it.
Specify an integer using the following form:
NUMBER(p)
This represents a fixed-point number with precision p and scale 0 and is equivalent to NUMBER(p,0).
Specify a floating-point number using the following form:
NUMBER
The absence of precision and scale designators specifies the maximum range and precision for an Oracle number.
And
2
NUMBER[(precision [, scale]])
Number having precision p and scale s. The precision p can range from 1 to 38. The scale s can range from -84 to 127
Sybrand Bakker
Senior Oracle DBA -
Difference between requirement number and dynamic bin number
hi,
what is the difference between requirement number and dynamic bin number in the WMS.i used requirement number as bin number in various scenarios ,but i am not used dynamic bin ....what is the use of it....or it is same as requirement bin number.
Thanks
Muthuraman.DThe Dynamic bin number means that SAP will create the number 'Dynamically. the requirement number is free text and is a reference number
If you create an outbound delivery and create a TO to pick it the stock moves to st type 916 and the bin is the delivery number but the delivery number does not exist at this point as a bin and when the delivery has shipped ypu no lomger require that bin number and so SAP creates the bin dynamically and then it disappears when the delivery is shipped
The createion of Dynamic bins is driven by a setting in the movement type so for instance for movement type 601 the dest st type is 916 and the destination st bin in the movement type config (OLMJ) is ticked so that the destination st bin is created 'Dynamically.
Yhis is the same for a GR when the bin is the PO number in 902 because it is created dynamically
I hope that this helps
Frenchy -
Differences between Online Number and Call Forward...
I have an unlimited subscription for the United States. For others to call me though I am not sure what the best option is. Could someone please clarify the differeces between having an Online number and having calls forwarded?
pebaker2 wrote:
Could someone please clarify the differeces between having an Online number and having calls forwarded?
Hello,
An Online # is for your contacts to call you. (You can't make calls from it).
Call forwarding is simply forwarding a received call to another phone of your choice.
To receive calls from your contacts you will need an Online #.
http://www.skype.com/intl/en-us/features/allfeatures/online-number/
http://www.skype.com/intl/en-us/features/allfeatures/call-forwarding/
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you. -
Difference between model Number and serial number.?
I have 2 instruments
Instrument 1 is 2 parameter display
Instrument 2 is 3 parameter display
Now how can know what is serial no. and model no. corresponding to the above instruments.
Solved!
Go to Solution.Nagaa wrote:
I have 2 instruments
Instrument 1 is 2 parameter display
Instrument 2 is 3 parameter display
Now how can know what is serial no. and model no. corresponding to the above instruments.
What instruments?
What type of instruments?
What does the manual for the instrument say about reading the serial no.
How are you communicating with them? Are they GPIB instruments? Are they DAQ instruments?
What do you mean by "2 parameter display" and "3 parameter display"?
Omar -
Receivables: Diferrence between "transaction number" and "document number"
Hi!
What is the difference between "transaction number" and "document number" as shown in the transactions window?
Where are they used?
thanks!Transaction number is the Invoice number. It can be a manually entered number in case of manual invoices. Even in case of imported invoices, it can be a manually assigned number if the trx_number field is populated in the ra_interface_lines_all table. If you Invoice batch source setup indicates automatic transaction numbering, the transaction (invoice) number will be automatically generated sequentially. The starting number is mentioned in the Trx batch source.
The document number is a number which is generated by Document sequencing. To have the document number generated, you have to do few Doc sequencing setups like setting the 'Sequencial Numbering' profile options, creating document sequences and assigning the sequence to the Categories. The trx types are created as categories.
The Transaction number can be the same as the document number if you enable the option 'Copy Document number to Transaction number' in the Invoice batch source.
Hope that helps.
Thanks,
Anil -
What is the difference between Serial numbers and Batch management.
Hi Gurus,
Can anyone explain the difference between Serial Number and Batch Management in breif.
Regards
RaviHi,
Serial number management and batch management are different functions that can be
used in conjunction with each other.
A batch represents a non-reproducible subset
of the total quantity of a material held in stock, which is managed separately from
other subsets of the same material.
For Example Different production lots
(for example, paints, wallpapers, pharmaceutical products), delivery lots or quality
grades of a material.
whereas a serial number is a number that you give to an individual item of material in addition
to the material number, in order to differentiate between this individual piece and all
other items of the material. The combination of material number and serial number
is unique. It is not necessary to use the batch management function to use serial
number management.
Regards
VIjay. -
What is the difference between the Time & Absence Quotas.
Hi,
Since i have not got the reply i am posting this queation again.
What is the difference between the Time & Absence Quotas.
Awaiting for the reply.
Regards
Rajeshmostly time telling in and out of the employee. it consists of dailly working time.it is mostly predefined in office. office timing.in SAP it is called as Daily work Schedule, in a day employee taaking brak for lunch it is called Break Schedule. in a week apattern is there which day will off and how the roaster is its called as Period work schdule. when a periodic work schedule will create along with declare holiday it is called work schedule. when work schedule will assign to employee it is called Personal work schedule.
Quota consist of leave like Casual leave, earn leave, sick leave etc.
leave quota will be given to employee so that at any particular day he can use it for his personal work -
Difference between sales document and sales document Header
Hi everyone,
what the difference difference between sales document and sales document Header if look at this equation
VBBE-VBELN= VBAK-VBELN
VBBW is sales document requirement
VBELN is a sales document
VBAK sales document header
then what the difference ales document and sales document Header
kindly assist me to guide the differences
thankshi
SAP has differenciated various sales scenarios into various salses documents. basing on the scenario & circumstances you will be having a sales document to use.
sales document header:which carries the properties of a sales document lie CMR MMR CMIR & Pricing conditions etc...
this will be applicable to entire sales document
by sales document we mean the total data carried by a particular document - header; item & schedule line data. each carries its own information to complete the sales document with out errors.
VBBE-VBELN= VBAK-VBELN stands for schedles in the sales order document & document header.
hope this clears your issue
balajia -
What is the difference between partition-count and the number of caches?
What is the difference between partition-count and the number of caches in Coherence? Are they same?
Those are totally orthogonal concepts.
For more, look at this thread where I answered your other related questions and explain this, too:
Where can I find the accurate definitions of these terms?
Best regards,
Robert -
What is the difference between SID,HOSTNAME and port number?
I want to know difference between SID,HOSTNAME and portnumber with purposes. could any one explain me with examples,please?
Thanks in advance.Raghavendra Rao J S V wrote:
I want to know difference between SID,HOSTNAME and portnumber with purposes. could any one explain me with examples,please?http://bit.ly/PkIJfi
http://bit.ly/PkIMri
http://bit.ly/PkINvD
Thanks,
Hussein -
Difference between Zfs volume and filesystem ?
Hi,
Does any one know the difference between Zfs volume and Zfs filesystem?
On one of the existing nodes i saw the following enries for two times....
root@node11> zfs get all rpool/dump
NAME PROPERTY VALUE SOURCE
rpool/dump type volume -
rpool/dump creation Thu Feb 18 13:55 2010 -
rpool/dump used 1.00G -
rpool/dump available 261G -
rpool/dump referenced 1.00G -
rpool/dump compressratio 1.00x -
rpool/dump reservation none default
rpool/dump volsize 1G -
rpool/dump volblocksize 128K -
root@node11> zfs get all rpool/ROOT/firstbe/opt/SMAW
NAME PROPERTY VALUE SOURCE
rpool/ROOT/firstbe/opt/SMAW type filesystem -
rpool/ROOT/firstbe/opt/SMAW creation Thu Feb 18 14:03 2010 -
rpool/ROOT/firstbe/opt/SMAW used 609M -
rpool/ROOT/firstbe/opt/SMAW available 264G -
rpool/ROOT/firstbe/opt/SMAW referenced 609M -
rpool/ROOT/firstbe/opt/SMAW compressratio 1.00x -
rpool/ROOT/firstbe/opt/SMAW mounted yes -
rpool/ROOT/firstbe/opt/SMAW quota none default
rpool/ROOT/firstbe/opt/SMAW reservation 4G local
rpool/ROOT/firstbe/opt/SMAW recordsize 128K default
rpool/ROOT/firstbe/opt/SMAW mountpoint /opt/SMAW inherited from rpool/ROOT/firstbe
root@node11> zfs list
NAME USED AVAIL REFER MOUNTPOINT
rpool/dump 1.00G 261G 1.00G -
rpool/ROOT/firstbe/opt/SMAW 609M 264G 609M /opt/SMAW
Regards,
Nitin Knitin.k wrote:
Hi,
Does any one know the difference between Zfs volume and Zfs filesystem?A volume is a block device. A filesystem is a mounted point for file access.
For most users, a volume isn't normally necessary except for 'dump'.
Darren -
Difference between Session method and call transaction
Hi,
please give me the differences between session method and call transaction,
briefly explaining synchronus , asynchronus, process, update.
Thanks in advanceHi Vijay Kumar
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as CLASSICAL METHOD.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
Among the two methods call transaction is better compared to session bcoz data transfer is faster in it.
Differences between call transaction and session.
Session Method:
1) Data is not updated in the database table until the session is processed.
2) No sy-subrc is returned.
3) Error log is created for error records.
4) Updation is always synchronous.
Call Transaction Method:
1) Immediate updation in the database table.
2) sy-subrc is returned.
3)Error need to be handled explicitly.
4) updation can be synchronous as well as asynchronous.
2) ya u can use using the N mode no screen.
3)u can't handle multiple transaction in call transaction.
4) u can handle multiple transaction in session using the BDC_INSERT fm.
5)When u go to SM35 u can able to see the error records.
Which is best?
That depends on your requirement. Both of them have there advantages.
According to the situation u can choose any one of these.
difference between batch input and call transaction in BDC Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
For session method,these are the function modules to b used.
BDC_OPEN_GROUP
BDC_INSERT
BDC_CLOSE_GROUP
For call transaction,this is the syntax.
CALL TRANSACTION TCODE USING BDCDATA
MODE A or E or N
UPDATE A or S
MESSAGES INTO MESSTAB.
Take a scenario where we need to post documents in FB01 and the input file has say 2000 records (2000 documents, not line items in FB01 but 2000 records)
In the BDC call transaction method
We call the transaction FB01 2000 times (once for each record posting) and if the processing fails in record no 3 it can be captured and start with reocord 4.
Eg: Loop at itab.
call transaction FB01
capture errors
endloop.
In the session method.
We do not explicity call the transaction 2000 times, but all the records are appeneded into a session and this session is stored. The processinf of the session is done wwhenever the user wants it to be done. Hence the errors cannot be captured in the program itself
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
Batch Input Session method is asynchronous as told by others here. But the advantage of this is that you have all the error messages and the data for each transaction held persistantly. You don't have to code anything for processing them or writing the logs.
But at the same time, the same feature can be disadvantageous if you need to react to an error or if there are too many errors to manually correct in a session. Since the session are created in the program and its execution is done seperately, you loose the trackability of such transactions.
With a call transaction, what was a disadvantage above will become an advantage. Call transaction immediately gives you messages back and you can react to it in your program. But the disadvantage is that, if you have several hundreds of transactions to run, running them from within the program can be resource crunching affair. It will hamper the system performance and you cannot really distribute the load. Of course, you have some mechanisms with which you can overcome this, but you will have to code for it. Also, storing the messages and storing the errored transaction data etc will have to be handled by you in the program. Whereas, in batch input session, your program's job is to just create the session, after that everything is standard SAP system's responsibility.
Ideally, you should do a call transaction if the resources are not a problem and if it fails, put the errored transaction into a session.
You can decide based on the data volume that your BDC is processing. If data volume is high go for session else call transaction will do.The call transaction updates will be instantaneous where as session needs to be processed explictly after creation.
Session Method
1) Session method supports both small amount of data aswell as large amount of data
2) data processing is asynchronus and data updation is synchronus.
3) it process multiple apllication while perfomaning validations.
4) in session method data will be updated in data base only after processing session only.
5) system provide by default logfile for handling error records.
6) it supports both foreground aswell as background process
in bdc we use FM ...
bdc_open_group " for creating Session
bdc_insert " adding transaction and bdcdata table for updating database
bdc_close_group " for closing Session
Call Transaction
1) Call transaction exclusively for small amout of data
2) it supports only one apllication while perfoming validations
3) there is no default logfile, We can explicitly provide logic for creating logfile for handling error records.
we can create logfile by using structure....BDCMSGCOLL
4) it doesn't support background processing.
5) data processing is synchronous and Data updation is Synchronous( default), in
this method also supports daya updation in asynchronus process also.
syntax:
Call transaction <transaction-name> using BDCDATA
mode <A/N/E>
update <L/A/S>
messages into BDCMSGCOLL.
BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
Features :
BDC is an automatic procedure.
This method is used to transfer large amount of data that is available in electronic medium.
BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
BDC uses normal transaction codes to transfer data.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as CLASSICAL METHOD.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
Check the following links:
http://www.sap-img.com/bdc.htm
See below example code :
Call three FM : BDC_OPEN_GROUP,BDC_INSERT and BDC_CLOSE_GROUP.
Once you execute the program and it creates the session at SM35 Transaction.
Report : ZMPPC011
Type : Data upload
Author : Chetan Shah
Date : 05/05/2005
Transport : DV3K919557
Transaction: ??
Description: This ABAP/4 Program creates new Production Versions
(C223). It accepts tab-delimited spreadsheet input and
creates BDC sessions.
Modification Log
Date Programmer Request # Description
06/10/2005 Chetan Shah DV3K919557 Initial coding
report zmppc011 no standard page heading line-size 120 line-count 55
message-id zz.
pool of form routines
include zmppn001.
Define BDC Table Structure
data: begin of itab_bdc_tab occurs 0.
include structure bdcdata.
data: end of itab_bdc_tab.
Input record layout of Leagcy File
data: begin of itab_xcel occurs 0,
matnr(18) type c,
werks(4) type c,
alnag(2) type c,
verid(4) type c,
text1(40) type c,
bstmi like mkal-bstmi,
bstma like mkal-bstma,
adatu(10) type c,
bdatu(10) type c,
stlal(2) type c,
stlan(1) type c,
serkz(1) type c,
mdv01(8) type c,
elpro(4) type c,
alort(4) type c,
end of itab_xcel.
data: begin of lt_pp04_cache occurs 0,
matnr like itab_xcel-matnr,
werks like itab_xcel-werks,
alnag like itab_xcel-alnag,
plnnr like mapl-plnnr,
arbpl like crhd-arbpl,
ktext like crtx-ktext,
end of lt_pp04_cache.
data: v_ssnnr(4) type n,
v_lines_in_xcel like sy-tabix,
v_ssnname like apqi-groupid,
v_trans_in_ssn type i,
wa_xcel LIKE itab_xcel,
l_tabix like sy-tabix,
v_matnr like rc27m-matnr,
v_plnnr like mapl-plnnr,
v_plnal like mapl-plnal,
v_tcode like sy-tcode value 'C223',
v_plnty like plas-plnty value 'R',
v_objty like crhd-objty value 'A',
v_plpo_steus like plpo-steus value 'PP04',
v_verwe like crhd-verwe value '0007'.
Parameters
selection-screen: skip 3.
selection-screen: begin of block 1 with frame.
parameters: p_name like rlgrap-filename
default 'C:\My Documents\InputFile.txt'
obligatory,
bdc session name prefix
p_bdcpfx(6) default 'ZPVCRT'
obligatory,
number for transction per BDC session
p_trnssn type i
default 2000 obligatory,
retain the BDC session after successfull execution
p_keep like apqi-qerase
default 'X',
user who will be executing BDC session
p_uname like apqi-userid
default sy-uname
obligatory.
selection-screen: end of block 1.
possible entry list (F4 dropdown) for input file name
at selection-screen on value-request for p_name.
*-SELECT FILE FROM USERS LOCAL PC
call function 'WS_FILENAME_GET'
exporting
DEF_FILENAME = ' '
def_path = 'C:\Temp\'
mask = ',.,..'
mode = 'O'
title = 'Select File '(007)
importing
filename = p_name
RC =
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
if sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
begin the show
start-of-selection.
read data from input file
perform transfer_xcel_to_itab.
loop at itab_xcel.
hang on to xcel line num
l_tabix = sy-tabix.
each line in the xcel file marks begining of new prod.version defn
if num-of-trnas-in-session = 0, create new BDC session
if v_trans_in_ssn is initial.
perform bdc_session_open.
endif.
begin new bdc script for rtg create trans
fill in bdc-data for prod.version maintenance screens
perform bdc_build_script.
insert the bdc script as a BDC transaction
perform bdc_submit_transaction.
keep track of how many BDC transactions were inserted in the BDC
session
add 1 to v_trans_in_ssn.
if the user-specified num of trans in BDC session is reached OR
if end of input file is reached, close the BDC session
if v_trans_in_ssn = p_trnssn or
l_tabix = v_lines_in_xcel.
perform bdc_session_close.
clear v_trans_in_ssn.
endif.
endloop.
top-of-page.
call function 'Z_HEADER'
EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =
FORM TRANSFER_XCEL_TO_ITAB *
Transfer Xcel Spreadsheet to SAP Internal Table *
form transfer_xcel_to_itab.
Read the tab-delimited file into itab
call function 'WS_UPLOAD'
exporting
filename = p_name
filetype = 'DAT'
IMPORTING
filelength = flength
tables
data_tab = itab_xcel
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
others = 8.
if sy-subrc = 0.
sort the data
sort itab_xcel by matnr werks.
clear v_lines_in_xcel.
if no data in the file - error out
describe table itab_xcel lines v_lines_in_xcel.
if v_lines_in_xcel is initial.
write: / 'No data in input file'.
stop.
endif.
else.
if file upload failed - error out
write: / 'Error reading input file'.
stop.
endif.
endform.
FORM BDC_SESSION_OPEN *
Open BDC Session *
form bdc_session_open.
create bdc session name = prefix-from-selectn-screen + nnnn
add 1 to v_ssnnr.
concatenate p_bdcpfx v_ssnnr into v_ssnname.
open new bdc session
call function 'BDC_OPEN_GROUP'
exporting
client = sy-mandt
group = v_ssnname
keep = p_keep
user = p_uname
exceptions
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
others = 11.
endform.
FORM BDC_BUILD_SCRIPT *
Build BDC *
form bdc_build_script.
data: l_arbpl like crhd-arbpl,
l_text1 like mkal-text1,
l_mdv01 like mkal-mdv01,
l_mapl like mapl.
clear bdc-data itab - begin of new bdc transaction
clear itab_bdc_tab.
refresh itab_bdc_tab.
read material cross reference tables to determine sap part#
clear : v_matnr, v_plnnr, v_plnal.
perform read_matnr_cross_ref using itab_xcel-matnr
itab_xcel-werks
changing v_matnr.
determine the version description to use
if itab_xcel-text1 is initial.
l_text1 = itab_xcel-verid.
else.
l_text1 = itab_xcel-text1.
endif.
determine the routing group# and group ctr# to use
perform read_routing .
determine the production line to use
if itab_xcel-mdv01 is initial.
if not provided in the file then:
prod line = work ctr on the last PP04 op of the rtg determined above
perform read_wc_on_last_pp04 using v_plnnr v_plnal
changing l_mdv01.
NOTE: when executing the above form\routine, if v_plnnr is initial
or v_plnal is initial, THEN l_mdv01 will automatically be
returned blank (ie initial)
else.
l_mdv01 = itab_xcel-mdv01.
endif.
build bdc script
perform bdc_build_script_record
fill in initial screen
using: 'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=ENTE',
' ' 'MKAL-WERKS' itab_xcel-werks,
' ' 'MKAL-MATNR' v_matnr,
' ' 'MKAL_ADMIN-DISPO' space,
' ' 'MKAL-PLNNR' space,
' ' 'MKAL_ADMIN-STTAG' space,
' ' 'MKAL-PLNNG' space,
' ' 'MKAL-MDV01' space,
' ' 'MKAL-PLNNM' space,
click create button on initial screen and go to detail screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=CREA',
fill in the detail screen and go back to initial screen
'X' 'SAPLCMFV' '2000',
' ' 'BDC_OKCODE' '=CLOS',
' ' 'MKAL_EXPAND-MATNR' v_matnr,
' ' 'MKAL_EXPAND-VERID' itab_xcel-verid,
' ' 'MKAL_EXPAND-TEXT1' l_text1,
' ' 'MKAL_EXPAND-BSTMI' itab_xcel-bstmi,
' ' 'MKAL_EXPAND-BSTMA' itab_xcel-bstma,
' ' 'MKAL_EXPAND-ADATU' itab_xcel-adatu,
' ' 'MKAL_EXPAND-BDATU' itab_xcel-bdatu,
' ' 'MKAL_EXPAND-PLTYG' v_plnty,
' ' 'MKAL_EXPAND-PLNNG' v_plnnr,
' ' 'MKAL_EXPAND-ALNAG' v_plnal,
' ' 'MKAL_EXPAND-STLAL' itab_xcel-stlal,
' ' 'MKAL_EXPAND-STLAN' itab_xcel-stlan,
' ' 'MKAL_EXPAND-SERKZ' itab_xcel-serkz,
' ' 'MKAL_EXPAND-MDV01' l_mdv01,
' ' 'MKAL_EXPAND-ELPRO' itab_xcel-elpro,
' ' 'MKAL_EXPAND-ALORT' itab_xcel-alort,
save the production version from initial screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=SAVE'.
endform.
FORM BDC_SUBMIT_TRANSACTION *
Submit BDC Session *
form bdc_submit_transaction.
Load BDC script as a trqansction in BDC session
call function 'BDC_INSERT'
exporting
tcode = v_tcode
tables
dynprotab = itab_bdc_tab
exceptions
internal_error = 01
not_open = 02
queue_error = 03
tcode_invalid = 04.
endform.
FORM BDC_BUILD_SCRIPT_RECORD *
form bdc_build_script_record using dynbegin name value.
clear itab_bdc_tab.
if dynbegin = 'X'.
move: name to itab_bdc_tab-program,
value to itab_bdc_tab-dynpro,
'X' to itab_bdc_tab-dynbegin.
else.
move: name to itab_bdc_tab-fnam,
value to itab_bdc_tab-fval.
shift itab_bdc_tab-fval left deleting leading space.
endif.
append itab_bdc_tab.
endform.
FORM BDC_SESSION_CLOSE *
Close BDC Session *
form bdc_session_close.
close the session
call function 'BDC_CLOSE_GROUP'
exceptions
not_open = 1
queue_error = 2
others = 3.
skip 2.
if sy-subrc ne 0.
write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
else.
write : / 'Session created:', v_ssnname,
50 '# of transactions:', v_trans_in_ssn.
endif.
endform.
*& Form read_routing_cache
*FORM read_routing_cache USING pi_matnr
pi_werks
pi_alnag
pi_verid
pi_mdv01.
DATA: BEGIN OF lt_plpo OCCURS 0,
vornr LIKE plpo-vornr,
objty LIKE crhd-objty,
objid LIKE crhd-objid,
arbpl LIKE crhd-arbpl,
END OF lt_plpo,
l_mapl_plnnr LIKE mapl-plnnr.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
SELECT plnnr INTO l_mapl_plnnr
FROM mapl UP TO 1 ROWS
WHERE matnr = pi_matnr AND
werks = pi_werks AND
plnty = 'R' AND
plnal = pi_alnag AND
loekz = space.
ENDSELECT.
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
*ENDFORM. " read_last_pp04_operation_cache
*& Form read_routing
form read_routing.
data: begin of lt_mapl occurs 0,
plnnr like mapl-plnnr,
plnal like mapl-plnal,
end of lt_mapl,
l_arbpl like crhd-arbpl.
get all the rtg# and grp ctr# from MAPL
select plnnr plnal
into corresponding fields of table lt_mapl
from mapl
where matnr = v_matnr and
werks = itab_xcel-werks and
plnty = v_plnty and "Rate Routing
loekz = space. "with del flag = OFF
sort lt_mapl by plnal.
if not itab_xcel-verid is initial.
if the verid=0001 then use the 1st good rtg-grp# and grp-ctr#
if itab_xcel-verid = '0001'.
read table lt_mapl index 1.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
else.
if the verid0001 then use the rtg-grp# and grp-ctr# of the routing
whose work center on the last PP04 operation matches the given verid
loop at lt_mapl.
clear l_arbpl.
get the work center from the last PP04 operation
perform read_wc_on_last_pp04 using lt_mapl-plnnr
lt_mapl-plnal
changing l_arbpl.
if itab_xcel-verid = l_arbpl.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
exit.
endif.
endloop.
endif.
else.
do nothing
endif.
For version IDs that are other then '0000' or 'ZWIP' :--
if itab_xcel-verid NE '0000' and
itab_xcel-verid NE 'ZWIP'.
if routing group# or group counter was not determined, make the
valid-to date 99/99/9999 so that the BDC, on execution, errors out.
if v_plnnr is initial or
v_plnal is initial.
itab_xcel-bdatu = '99/99/9999'.
endif.
endif.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
endform. " read_last_pp04_operation_cache
*& Form read_wc_on_last_pp04
form read_wc_on_last_pp04 using pi_plnnr
pi_plnal
changing pe_arbpl.
data: begin of lt_plpo occurs 0,
vornr like plpo-vornr,
objty like crhd-objty,
objid like crhd-objid,
arbpl like crhd-arbpl,
end of lt_plpo.
get all the PP04 operations for the given rtg# & grp-ctr#
select vornr eobjty eobjid e~arbpl
into corresponding fields of table lt_plpo
from plas as b
inner join plpo as c
on bplnty = cplnty and
bplnnr = cplnnr and
bzaehl = czaehl
inner join crhd as e
on carbid = eobjid
where b~plnty = v_plnty and "Rate Routing
b~plnnr = pi_plnnr and
b~plnal = pi_plnal and
c~loekz = space and "Oper Del Flag = OFF
c~steus = v_plpo_steus and "PP04
e~objty = v_objty. "WC Obj Type = 'A'
read the last operation
sort lt_plpo by vornr descending.
read table lt_plpo index 1.
pe_arbpl = lt_plpo-arbpl.
endform. " read_wc_on_last_pp04
Goto LSMW-> Select Direct Input method in 1st step. These are the standard programs for data transfer.
Otherwise goto SPRO->SAP Reference IMG-> Under this you'll find standard data transfer programs module wise.
Reward points,
Shakir -
Difference between co-product and By-product
Hi,
Can anyone tell me Difference between co-product and By-product with example?
What is their impact on costing?Hi,
By-Product : By-Product is a Product Created While Making Production
1. The System Does not create a separate order item for each by-Product
2. The Material Valuation of a by-Product is always based on the price, specified by the price control in the material master
3. The by-product must be listed as an item in the bill of material of the main product .The bill of material item must have a negative quantity (for example 1 -)
4. Byproduct has only the -ve quantity in BOM component, it does not go for joint production costing.
5. Movement type 531 to post the By-Product during Confirmation.
6. Settlement of cost is done to the header of the material
Co-Product :A co-product is a product that is produced in conjunction with other products. The system creates a separate order item in the production order for each co-product. As a result, it is possible to display actual costs at co-product
Settings: 1.) You have to activate check box in MRP2 view for co product.
2.) For co products we also need to define the apportionate structure with equivalence number for costing purpose, this will be done in "Joint Production" details in the same view. (30:30:20:20)
Prerequisite for the main product:
1.) The indicator Co-product must be activated in the material master of the main product (MRP area)
Prerequisites for a co-product:
1.) The indicator Co-product must be activated in the material master of the co-product (MRP area)
The co-product must be listed as an item in the bill of material of the main product
2.) On the Basic data tab page of the BOM item, the indicator Co-product must be activated in the field group General data
Regards
Sunil Kumar -
Difference between Internal HU and External HU
Hi guys,
I am quite new to WM, can you please tell me Difference between Internal HU and External HUThe HU information is stored in table VEKP (header) and VEPO (item). In the header table you can find Internal HU No (VENUM). This is the internal SAP number automatically assigned as the table key each time you create an HU. However, the HU aslo has an external number (EXIDV) which is the number of the HU that is used when marking the HU. This number allows for a longer ID than the internal number if you want to use.
Here is the documentation for EXIDV.
Short Text
External Handling Unit Identification
Definition
Specifies an external identifier for the handling unit.
Use
The system automatically generates an internal number that must be unique for each system client. The system also needs external identification so that it can uniquely identify handling units.
1. Creating a handling unit:
Identifiers for handling units are determined during creation according to settings in Customizing for number assignment of the packaging material type for the packaging material that is being used. You can also assign default values for identifiers when you create handling units, although these values must correspond to the settings in Customizing.
2. Processing a handling unit
To edit existing handling units, enter the handling unit's identification in this field.
Rgds
Richard
Maybe you are looking for
-
hey, I have three servers, lets say Svr1, Svr2 & Svr3. On all three i have sql2000 & sql 2005. On Svr1 & Svr2 sql2005 is default and sql2000 is an instance and they work perfect. However on Svr3 I have sql2000 as default and sql2005 as an instance, I
-
All of a sudden expose will go into effect randomly. I will click to close an app, hit to scroll or just click inside app or browser window and it will make all windows thumbnails. Only settings in place for Expose re the F9 key to activate. No corne
-
OEM2.1 or OEM2.2
Hi, I have problem with Oracle Enterprise Manager Configuration. I installed Oracle8.1.6 Database Server and then Oracle Enterprise Manager 2.1. During installation I created the repository. But when I try to start console, I get the the error for Or
-
Skype and Mobily network in Saudi Arabia
Anyone faces issue with Mobily network while calling through Skype. For me, Skype calling is automatically ending after one or two minutes
-
Calc Scripts run a lot faster after I copy existing database
Hi, I have user being setup as the Application Designer of the application and each time when he run scripts of the database, it takes a lot longer than myself (I'm the Supervisor). The database was built up from scratch, so it is not database copy v