Difference between "REBUILD ONLINE" and "REBUILD" while altering index

Hi Everyone,
Please go through this link.
[http://docs.oracle.com/cd/B28359_01/server.111/b28310/indexes004.htm#i1006864]
Now if Rebuilding online enables you to update base tables at the same time that you are rebuilding, then when the base table is getting updated while Rebuilding without online option?
Regards,
BS2012

Hi,
I believe it work like this way
rebuild without online option => table and index is locked in exclusive mode preventing any translations on the table.
With online index rebuild, transactions can still access the table and index.

Similar Messages

What is the difference between undo tablespace and online redo log files.

what is the difference between undo tablespace and online redo log files. I am confused
as per my knowledge undo tablespace is used to store the undo information when a table is being updated so that, just incase we need to rollback a transaction we know what was present in the table earlier.
when a transaction fails the SMON performs the rollback of the data.
This undo data is stored in the undo tablespace and read consistency if any is enforced.
is my understanding till here correct?
Now, can this undo data/before image not be stored in the redo log buffer and online redolog files?
can redo-log files not store this information?
in fact, is it that when undo tablespaces exist in a database, the undo data/before image is stored in both the undo tablespace and also the redo log files?
kindly clarify my doubt.
thank you.

This question has been asked many times before. The answer is always the same.
Yes, redo contains the before image of data (and the after-image). Therefore, it **COULD** be used to roll back a transaction.
BUT... Redo is written sequentially. Using it to rollback your transaction would involve reading through all the redo written by maybe thousands of other people. It would be painfully slow.
Your transaction is, however, directly linked to just the UNDO that it generates (which is JUST the before image of the data). So, your undo is your undo and doesn't share space with anyone else's undo. Therefore, using it to roll back YOUR transaction is fast.
The fact that undo is only the before image of the data also makes it faster than wading through a sea of before and AFTER images as you'd find in redo. About twice as fast, in fact, since there's half the data. Roughly.
Redo also gets written and flushed to disk whenever there's a commit, 3 seconds are up or too much (1MB, actually) redo gets generated between flushes caused by other factors. Your redo gets flushed when those things happen, even if you haven't actually committed your transaction. And redo logs recycle themselves, meaning that your redo -even if your transaction hasn't been committed yet- can be over-written by later transactions. Try rolling back when that's happened, if redo was the source of your rollback data!
Undo, however, cannot be over-written if the transaction has not been committed. Ever. If you don't commit for three years, there will be three years' undo stored in your database (assuming you had the space, of course!).
I could go on, but that will do. Redo is there fore RECOVERY, after catastrophe. Undo is there for read-consistency (and the occasional change of mind). Two different functions. Two different mechanisms. Each one highly tuned to doing what it does, why it does it, most efficiently and effectively.

DIFFERENCE BETWEEN THE FULL AND BULK-LOGGED RECOVERY MODEL

DIFFERENCE BETWEEN THE FULL AND BULK-LOGGED RECOVERY MODEL

In bulk logged recovery mode certain bulk operations are minimally logged. In FULL recovery mode these are fully logged. These bulk operations are as mentioned below
1. SELECT INTO
2. BULK IMport operations including BULK INSERT and BCP
3. INSERT INTO SELECT command using the OPENROWSET(BULK) function
4. Partial updates to columns having large value data type
5. Using WRITE clause in UPDATE statements
6. Index operations e.g CREATE INDEX, ALTER INDEX REBUILD , DROP INDEX
In Bulk Logged Recovery Mode when you execute these operations SQL Server only logs the fact that these operation occured and information about space allocation. The actual change in the data is maintained in the BCM (Bulk
Changed Map)
Since the actual changes are not recorded in the log file, the log file size in the reletively less in size but this tradeoff comes with the price of increased backup time. This is so because during the log backup its not just the log being backup, but also
the extents that are marked by the Bulk Changed Map as changed.
SQLEnthusiast
http://sqlsimplified.com/
Please click the Mark as Answer button if a post solves your problem!

What's the difference between reguler KDE and KDEmod?

Hello all,
In two weeks I get my new laptop, which will be capable of running Arch and KDE ( as my current computer isn't, somehow it only runs Fedora w/ Gnome)
Since I really like Arch and already got it working on Virtualbox, I want to install it on my new laptop. I'd like to get it working with KDE, but I noticed Arch also has KDEmod. I already searched the forums but couldn't really find an answer to my question: What is the difference between regular KDE and KDEmod and which one is better for me to use?
Thanks in advance!

Allan, i forgive you for your poor paragraph construction and sorry for me being a bit peeved
However, i know you have read more from the IRC log than just that one sentence by me...
Allan wrote:
From the IRC log, I do not think that conclusion is too far off, especially if you are considering Arch-Stable as your base... So saying "plain wrong" seems... well... plain wrong. Especially given the irc log:
<funkyou> in one sentence: to do what we really want to do, we need a stable platform.
So why not showing the whole picture and clear this up:
<funkyou> ok, to start: i think at least some of you have noticed that arch linux is a fine platform for what we want to deliver, but there are some little "annoyances"
<funkyou> mainly:
<funkyou> -.so bumps every few weeks
<funkyou> -the general "freshness"
<funkyou> -a lot of manual interaction needed (sometimes)
<funkyou> everyone can see these problems when looking at the forums, _most_ of them are related to updates
<funkyou> in one sentence: to do what we really want to do, we need a stable platform.
Makes more sense now? Its not that Arch is too unstable, its just that we cant keep up will all the changes... And this is not Archs "fault" nor anyone elses fault, its just going too fast for us. Most annoying or severe bugs in our tools are there due to upstream updates. And the reasons are not really the .so bumps (which are mostly solved by a simple rebuild) but also constantly changing apis and stuff. This is not a big problem in KDE (they keep their apis clean), but a big one when it comes to other stuff like parted, to give an example. And this is our main problem, we need to constantly adapt our code to upstream changes.
This even resulted in a repo with modified or "frozen" Arch packages just to keep our liveCD going, and now we are looking for solutions for this problem, and "stable" snapshots seem to be one way... Oh, and if we would do this (there is nothing announced yet), we would do our own snapshot every X months because ArchStable seems to be a dead project. We also considered cooperating with the ArchServer guys, but their stuff is really made for servers, so even while their project is really nice its not really an option for us.
Well, we'll see what we will do during the next months, now we are still testing and evaluating some solutions... Oh, and people, please stop any "we dont need another ubuntu" complaints...

List of differences between PSE 40 and PSE30

A lot of users are asking what are the differences between PSE 30 and PSE 40.
This Thread provides information on this subject. First, you will find information copied from the section "New Features" of the useful "Adobe Photoshop Elements 4.0 User Guide". Then later on, you might find additional information on the same subject provided by users of PSE.
--- Start of copy of information in the PSE 4.0 User Guide ----
1 What's new in PSE 4.0
1.1 Editing and selection
1.1.1 Magic Selection Brush tool
Easily and accurately select portions of your photos using this new tool in either Standard Edit and Quick Fix. Simply scribble or place dots on the object you want to select -no need to precisely outline the object- and Adobe Photoshop Elements selects the object for you. You can add to or subtract from the selection by using additional tools in the options bar. (See User Guide "To use the Magic Selection Brush tool" on page 193.)
1.1.2 Magic Extractor.
Easily select an object in a photo and extract it from its background. Just scribble or place dots on
the object you want to extract; then scribble or place dots on the background, and Photoshop Elements separates the object from its background. This tool is perfect for creating composites or scrapbook images. (See User Guide "To use the Magic Extractor" on page 194.)
1.1.3 Skin tone adjustment
Click an area of skin and watch the tonal balance of all colors in the photo improve. If you
want, you can also manually adjust the color by using color sliders. (See User Guide "To adjust the color of skin tone" on page 224.)
1.1.4 Red eye removal
Automatically remove red eye during import, or select one or more files and easily remove red eye
in either the Organizer or the Editor. (See User Guide "To remove red eye" on page 249.)
1.1.5 Defringe
Automatically remove the colored specs or halo around the edges of a selection. (See User Guide "To defringe a Selection" on page 200.)
1.1.6 Straighten tool
Straighten and crop crooked photos by drawing a horizontal or vertical line in the image. Photoshop
Elements aligns the photo to that line. (See User Guide "To straighten an image" on page 243.)
1.1.7 WYSIWYG font menu
What you see is what you get -see what each font looks like from within the font menu. (See
User Guide "To choose a font family and style" on page 332.)
1.2 Sharing and printing
1.2.1 One-click printing (US, Canada, Japan only)
Order prints and professional hardbound photo books directly from Photoshop Elements simply by dragging the items to the Order Prints palette. (See User Guide "To use the Order Prints palette (US, Canada, Japan only)" on page 401.)
1.2.2 Slide shows on TV
If you have Windows¨ XP Media Center 2005 installed, you can view your Photoshop Elements
slide shows on your TV and navigate using your TV remote control. (See User Guide "To output a slide show" on page 354.)
1.3 Tagging and organizing
1.3.1 Face tagging
Select a group of photos and let Photoshop Elements isolate and display all the faces so that you can
quickly tag them. The Find Faces dialog box displays thumbnails of each face until you tag it. (See User Guide "To automatically find faces for tagging" on page 101.)
1.3.2 Search by metadata
Search for a variety of metadata criteria, such as file name, file type, shutter speed, camera
model, date, and tags. You can search on multiple criteria at once. (See User Guide "To find photos by details (metadata)" on page 89.)
1.3.3 PDF support
Manage and tag PDF files in the Organizer. PDF files remain intact as one file that you can tag. Open
the PDF in the Editor to extract individual pages. (See User Guide "To open a PDF file" on page 148.)
--- Continuation in next Post of this Thread ----

--- Continuation from previous Post -----
2 What's changed in PSE 4.0
2.1 Editing and selecting
2.1.1 Crop tool
Freely change image size boundaries while cropping an image. When you're happy with your crop marks,
click the Commit button , which is now conveniently located at the bottom right corner of the crop border. (See User Guide "To crop an image" on page 240.)
2.1.2 Paragraph text
Create paragraph text by dragging a border with the Text tool. The text you enter inside the border
wraps to remain inside the boundaries. (See User Guide "To add text" on page 329.)
2.1.3 Quick Fix
Use the newly enhanced automatic correction options for the most common photo flaws. (See User Guide "To correct color in Quick Fix" on page 207.)
2.1.4 Easier color management
Easily get the color you expect when printing. N ew options and improved embedded
profile support streamline color management. (See User Guide "About color management" on page 236.)
2.1.5 Advanced camera raw
Fine tune exposure and lighting by working with the raw data from your digital camera, and
easily export photos to the universal DNG format. (See User Guide "About camera raw image files" on page 159.)
2.1.6 Artifact reduction
Quickly remove noise caused by shooting in low light or with ISO camera settings by using the
new Remove JPEG Artifacts option in the Noise filter. (See User Guide "Reduce Noise" on page 289.)
2.2 Sharing and printing
2.2.1 Multimedia slide shows
Create feature-rich slide shows with all the new tools and options available in the Slide Show
Editor:
a) Gracefully move from one image to another by adding interesting transitions between each slide. You can choose from over 50 transitions, such as dissolves and doors. (See User Guide "To add and edit transitions" on page 352.)
b) Add text and graphics with the click of a button. (See User Guide "To add text to a slide" on page 348 and "To add clip art graphics to a slide" on page 347.)
c) Make your slide show feel more like a video by panning and zooming your slides. For instance, you can pan from a face on the left side of an image to a face on the right side of the image. (See User Guide "To set pan and zoom" on page 350.)
d) Add background music, make the duration of your slides match the duration of your audio, and narrate your slides all with the click of a button. (See User Guide "To add music to a slide show" on page 347 and "To add narration to a slide" on page 350.)
e) Quickly reorder or edit your slides without leaving the Slide Show Editor. (See User Guide "To reorder slides" on page 346.)
f) Preview anytime by clicking the Preview button, and then output your slide show by burning a DVD (if you have Adobe ' Premiere' Elements installed), sending it in e-mail, sharing it online, or sending it to your TV. (See User Guide "To output a slide show" on page 354.)
2.2.2 Photo mail
Turn plain e-mail into theme-based Photo Mail with enhanced and easier to use captions. (See User Guide "To send a photo using Photo Mail" on page 407.)
2.2.3 Desktop wallpaper
Create original desktop wallpaper using multiple photos. (See User Guide "To use photos as desktop
Wallpaper" on page 367.)
2.2.4 Creations
Create your own cards, calendars, and photo albums, and then print them on your printer, upload them
to the web, or burn them to CD. (See User Guide "About creations" on page 343.)
2.3 Viewing, tagging, and organizing
2.3.1 Faster download
Use the enhanced Photo Downloader to quickly download photos from your digital camera and
mobile phone, even when Photoshop Elements is not running. (See User Guide "To get photos from a digital camera or card reader" on page 62.)
2.3.2 Full Screen and Side By Side View
View your photos in full screen without the clutter of command menus and tools.
(See User Guide "Viewing photos at full screen or side-by-side" on page 76.)
2.3.3 Automatic organization and view options
View your photos as arranged automatically by date, or use the intuitive
Date View or the enhanced Folder Location view. (See User Guide "To sort files in the Photo Browser" on page 71.)
2.3.4 Address book
Import your addresses from Microsoft Outlook address book or vCards. (See User Guide "Using the contact Book" on page 404.)
2.3.5 Captions
Add captions to multiple photos at once. Open and edit audio captions by simply clicking the Audio
icon in thumbnail view in the Photo Browser. (See User Guide "To add captions to files" on page 123 and "To add audio to a photo" on page 124.)
--- End of Information Copied from the Adobe PSE 4.0 User Guide

Exect difference between Fuzzy lookup and Fuzzy grouping

Hi all,
Can you pls explain difference between Fuzzy lookup and Fuzzy grouping in simple word,pls
Thanks
Selva

Hi Selva,
In brief, the Fuzzy Grouping Transformation can be used to group the similar rows in the source dataset and identify rows of data that are likely to be duplicate; while the Fuzzy Lookup Transformation can match records between the source table and reference
table that are similar, but not identical to, the lookup key.
Here are good examples about the two transformations:
http://ssis-tutorial-online.blogspot.com/2013/04/fuzzy-grouping-transformation.html
http://www.codeproject.com/Tips/528243/SSIS-Fuzzy-lookup-for-cleaning-dirty-data
Regards,
Mike Yin
TechNet Community Support

What is the difference between Genius Mix and Genius Playlist?

Yeah, what is actually the difference between Genius Mix and Genius Playlist?
G.P. starts with a song I select and teams up with songs that go with it while G.M. is only songs that go well together, is that it?
A G.P. that I like can be saved and altered, but G.M.´s seems to be volatile? Can I see all the songs in a G.M.? All I can find, is the possibility to click Next and Previous.
Thanks

Genius Mixes are 'Genre' based groups of music.
Genius Playlists are songs that go together based on other people's playlists, they can be from any Genre.
You can't see what will be playing in the Genius Mix list.
Message was edited by: Ian Parkinson

What's the difference between SharePoint 2013 and Office 365 Team Sites?

Hi there,
What are the differences between SharePoint 2013 and Office 365 Team Sites?
If I would like to develop a professional corporate website with SharePoint technology (because the company allready uses Office 365), do you recommend using SharePoint 2013 (in the cloud) or Office 365 Team Sites? And why?
Thank you very much!

You cannot make SPO Team Sites anonymous-enabled, therefor they're a moot point for a public website.
While slightly out of date, take a look at this:
http://nikpatel.net/2013/01/17/new-sharepoint-2013-wcm-features-are-not-available-in-sharepoint-online-2013/
http://technet.microsoft.com/en-us/library/sharepoint-online-content-service-description.aspx
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Differences between Procedural ABAP and OOPs ABAP

Hi Friends,
Can any one explain the differences between Procedural ABAP and OOPs ABAP in brief ? pls explain the most important ( atleast 3 or 4 points ). pls don't give me any other links, i will appreciate for good responses... and will be awarded with full points...
Thanks and Regards
Vijaya

Hi
Core ABAP (procedural) works with Event driven, subroutine driven one
OOPS ABAP works on the OOPS concepts like Inheritance, polymorphism,abstraction and encapsulation.
see the doc
ABAP is one of many application-specific fourth-generation languages (4GLs) first developed in the 1980s. It was originally the report language for SAP R/2, a platform that enabled large corporations to build mainframe business applications for materials management and financial and management accounting. ABAP used to be an abbreviation of Allgemeiner Berichtsaufbereitungsprozessor, the German meaning of "generic report preparation processor", but was later renamed to Advanced Business Application Programming. ABAP was one of the first languages to include the concept of Logical Databases (LDBs), which provides a high level of abstraction from the basic database level.
The ABAP programming language was originally used by SAP developers to develop the SAP R/3 platform. It was also intended to be used by SAP customers to enhance SAP applications customers can develop custom reports and interfaces with ABAP programming. The language is fairly easy to learn for programmers but it is not a tool for direct use by non-programmers. Good programming skills, including knowledge of relational database design and preferably also of object-oriented concepts, are required to create ABAP programs.
ABAP remains the language for creating programs for the client-server R/3 system, which SAP first released in 1992. As computer hardware evolved through the 1990s, more and more of SAP's applications and systems were written in ABAP. By 2001, all but the most basic functions were written in ABAP. In 1999, SAP released an object-oriented extension to ABAP called ABAP Objects, along with R/3 release 4.6.
SAP's most recent development platform, NetWeaver, supports both ABAP and Java.
Implementation
Where does the ABAP Program Run?
All ABAP programs reside inside the SAP database. They are not stored in separate external files like Java or C++ programs. In the database all ABAP code exists in two forms: source code, which can be viewed and edited with the ABAP workbench, and "compiled" code ("generated" code is the more correct technical term), which is loaded and interpreted by the ABAP runtime system. Code generation happens implicitly when a unit of ABAP code is first invoked. If the source code is changed later or if one of the data objects accessed by the program has changed (e.g. fields were added to a database table), then the code is automatically regenerated.
ABAP programs run in the SAP application server, under control of the runtime system, which is part of the SAP kernel. The runtime system is responsible for processing ABAP statements, controlling the flow logic of screens and responding to events (such as a user clicking on a screen button). A key component of the ABAP runtime system is the Database Interface, which turns database-independent ABAP statements ("Open SQL") into statements understood by the underlying DBMS ("Native SQL"). The database interface handles all the communication with the relational database on behalf of ABAP programs; it also contains extra features such as buffering of frequently accessed data in the local memory of the application server.
Basis
Basis sits between ABAP/4 and Operating system.Basis is like an operating system for R/3. It sits between the ABAP/4 code and the computer's operating system. SAP likes to call it middleware because it sits in the middle, between ABAP/4 and the operating system. Basis sits between ABAP/4 and the operating system. ABAP/4 cannot run directly on an operating system. It requires a set of programs (collectively called Basis) to load, interpret, and buffer its input and output. Basis, in some respects, is like the Windows environment. Windows starts up, and while running it provides an environment in which Windows programs can run. Without Windows, programs written for the Windows environment cannot run. Basis is to ABAP/4 programs as Windows is to Windows programs. Basis provides the runtime environment for ABAP/4 programs. Without Basis, ABAP/4 programs cannot run. When the operator starts up R/3, you can think of him as starting up Basis. Basis is a collection of R/3 system programs that present you with an interface. Using this interface the user can start ABAP/4 programs. To install Basis, an installer runs the program r3inst at the command-prompt level of the operating system. Like most installs, this creates a directory structure and copies a set of executables into it. These executables taken together as a unit form Basis.
To start up the R/3 system, the operator enters the startsap command. The Basis executables start up and stay running, accepting requests from the user to run ABAP/4 programs.
ABAP/4 programs run within the protective Basis environment; they are not executables that run on the operating system. Instead, Basis reads ABAP/4 code and interprets it into operating system instructions. ABAP/4 programs do not access operating system functions directly. Instead, they use Basis functions to perform file I/O and display data in windows. This level of isolation from the operating system enables ABAP/4 programs to be ported without modification to any system that supports R/3. This buffering is built right into the ABAP/4 language itself and is actually totally transparent to the programmer.
Basis makes ABAP/4 programs portable. The platforms that R/3 can run on are shown in Table. For example, if you write an ABAP/4 program on Digital UNIX with an Informix database and an OSF/Motif interface, that same program should run without modification on a Windows NT machine with an Oracle database and a Windows 95 interface. Or, it could run on an AS/400 with a DB2 database using OS/2 as the front-end.
SAP also provides a suite of tools for administering the Basis system. These tools perform tasks such as system performance monitoring, configuration, and system maintenance. To access the Basis administration tools from the main menu, choose the path Tools->Administration.
Platforms and Databases Supported by R/3
Operating Systems Supported Hardware Supported Front-Ends Supported Databases
AIX SINIX IBM SNI SUN Win 3.1/95/NT DB2 for AIX
SOLARIS HP-UX Digital HP OSF/Motif Informix-Online
Digital-UNIX Bull OS/2 Oracle 7.1
Windows NT AT&T Compaq Win 3.1/95/NT Oracle 7.1
Bull/Zenith OSF/Motif SQL Server 6.0
HP (Intel) SNI OS/2 ADABAS D
OS/400 AS/400 Win95 OS/2 DB2/400
SAP Systems and Landscapes
All SAP data exists and all SAP software runs in the context of an SAP system. A system consists of a central relational database and one or more application servers ("instances") accessing the data and programs in this database. A SAP system contains at least one instance but may contain more, mostly for reasons of sizing and performance. In a system with multiple instances, load balancing mechanisms ensure that the load is spread evenly over the available application servers.
Installations of the Web Application Server (landscapes) typically consist of three systems: one for development, one for testing and quality assurance, and one for production. The landscape may contain more systems, e.g. separate systems for unit testing and pre-production testing, or it may contain fewer, e.g. only development and production, without separate QA; nevertheless three is the most common configuration. ABAP programs are created and undergo first testing in the development system. Afterwards they are distributed to the other systems in the landscape. These actions take place under control of the Change and Transport System (CTS), which is responsible for concurrency control (e.g. preventing two developers from changing the same code at the same time), version management and deployment of programs on the QA and production systems.
The Web Application Server consists of three layers: the database layer, the application layer and the presentation layer. These layers may run on the same or on different physical machines. The database layer contains the relational database and the database software. The application layer contains the instance or instances of the system. All application processes, including the business transactions and the ABAP development, run on the application layer. The presentation layer handles the interaction with users of the system. Online access to ABAP application servers can go via a proprietary graphical interface, the SAPGUI, or via a Web browser.
Transactions
We call an execution of an ABAP program using a transaction code a transaction. There are dialog, report, parameter, variant, and as of release 6.10, OO transactions. A transaction is started by entering the transaction code in the input field on the standard toolbar, or by means of the ABAP statements CALL TRANSACTION or LEAVE TO TRANSACTION. Transaction codes can also be linked to screen elements or menu entries. Selecting such an element will start the transaction.
A transaction code is simply a twenty-character name connected with a Dynpro, another transaction code, or, as of release 6.10, a method of an ABAP program. Transaction codes linked with Dynpros are possible for executable programs, module pools, and function groups. Parameter transactions and variant transactions are linked with other transaction codes. Transaction codes that are linked with methods are allowed for all program types that can contain methods. Transaction codes are maintained in transaction SE93.
So, a transaction is nothing more than the SAP way of program executionbut why is it called transaction? ABAP is a language for business applications and the most important features of business applications were and still are are transactions. Since in the early days of SAP, the execution of a program often meant the same thing as carrying out a business transaction, the terms transaction and transaction code were chosen for program execution. But never mix up the technical meaning of a transaction with business transactions. For business transactions, it is the term LUW (Logical Unit of Work) that counts. And during one transaction (program execution), there can be many different LUWs.
Lets have a look at the different kind of transactions:
Dialog Transaction
These are the most common kind of transactions. The transaction code of a dialog transaction is linked to a Dynpro of an ABAP program. When the transaction is called, the respective program is loaded and the Dynpro is called. Therefore, a dialog transaction calls a Dynpro sequence rather than a program. Only during the execution of the Dynpro flow logic are the dialog modules of the ABAP program itself are called. The program flow can differ from execution to execution. You can even assign different dialog transaction codes to one program.
Parameter Transaction
In the definition of a parameter transaction code, a dialog transaction is linked with parameters. When you call a parameter transaction, the input fields of the initial Dynpro screen of the dialog transaction are filled with parameters. The display of the initial screen can be inhibited by specifying all mandatory input fields as parameters of the transaction.
Variant Transaction
In the definition of a variant transaction code, a dialog transaction is linked with a transaction variant. When a variant transaction is accessed, the dialog transaction is called and executed with the transaction variant. In transaction variants, you can assign default values to the input fields on several Dynpro screens in a transaction, change the attributes of screen elements, and hide entire screens. Transaction variants are maintained in transaction SHD0.
Report Transaction
A report transaction is the transaction code wrapping for starting the reporting process. The transaction code of a report transaction must be linked with the selection screen of an executable program. When you execute a report transaction, the runtime environment internally executes the ABAP statement SUBMITmore to come on that.
OO Transaction
A new kind of transaction as of release 6.10. The transaction code of an OO transaction is linked with a method of a local or global class. When the transaction is called, the corresponding program is loaded, for instance methods an object of the class is generated and the method is executed.
Types of ABAP programs
In ABAP, there are two different types of programs:
Report programs(Executable pools)
A Sample ReportReport programs AKA Executable pools follow a relatively simple programming model whereby a user optionally enters a set of parameters (e.g. a selection over a subset of data) and the program then uses the input parameters to produce a report in the form of an interactive list. The output from the report program is interactive because it is not a passive display; instead it enables the user, through ABAP language constructs, to obtain a more detailed view on specific data records via drill-down functions, or to invoke further processing through menu commands, for instance to sort the data in a different way or to filter the data according to selection criteria. This method of presenting reports has great advantages for users who must deal with large quantities of information and must also have the ability to examine this information in highly flexible ways, without being constrained by the rigid formatting or unmanageable size of "listing-like" reports. The ease with which such interactive reports can be developed is one of the most striking features of the ABAP language.
The term "report" is somewhat misleading in the sense that it is also possible to create report programs that modify the data in the underlying database instead of simply reading it.
A customized screen created using Screen Painter,which is one of the tool available in ABAP workbench(T-code = SE51).
Online programs
Online programs (also called module pools) do not produce lists. These programs define more complex patterns of user interaction using a collection of screens. The term screen refers to the actual, physical image that the users sees. Each screen also has a flow logic; this refers to the ABAP code invoked by the screens, i.e. the logic that initializes screens, responds to a users requests and controls the sequence between the screens of a module pool. Each screen has its own Flow Logic, which is divided into a "PBO" (Process Before Output) and "PAI" (Process After Input) section. In SAP documentation the term dynpro (dynamic program) refers to the combination of the screen and its Flow Logic.
Online programs are not invoked directly by their name, but are associated with a transaction code. Users can then invoke them through customizable, role-dependent, transaction menus.
Apart from reports and online programs, it is also possible to develop sharable code units such as class libraries, function libraries and subroutine pools.
Subroutine Pools
Subroutine pools, as the name implies, were created to contain selections of subroutines that can be called externally from other programs. Before release 6.10, this was the only way subroutine pools could be used. But besides subroutines, subroutine pools can also contain local classes and interfaces. As of release 6.10, you can connect transaction codes to methods. Therefore, you can now also call subroutine pools via transaction codes. This is the closest to a Java program you can get in ABAP: a subroutine pool with a class containing a method say main connected to a transaction code!
Type Pools
Type pools are the precursors to general type definitions in the ABAP Dictionary. Before release 4.0, only elementary data types and flat structures could be defined in the ABAP Dictionary. All other types that shouldve been generally available had to be defined with TYPES in type pools. As of release 4.0, type pools were only necessary for constants. As of release 6.40, constants can be declared in the public sections of global classes and type pools can be replaced by global classes.
Class Pools
Class pools serve as containers for exactly one global class. Besides the global class, they can contain global types and local classes/interfaces to be used in the global class. A class pool is loaded into memory by using one of its components. For example, a public method can be called from any ABAP program or via a transaction code connected to the method. You maintain class pools in the class builder.
Interface Pools
Interface pools serve as containers for exactly one global interfacenothing more and nothing less. You use an interface pool by implementing its interface in classes and by creating reference variables with the type of its interface. You maintain interface pools in the class builder.
ABAP Workbench
The ABAP Workbench contains different tools for editing Repository objects. These tools provide you with a wide range of assistance that covers the entire software development cycle. The most important tools for creating and editing Repository objects are:
ABAP Editor for writing and editing program code
ABAP Dictionary for processing database table definitions and retrieving global types
Menu Painter for designing the user interface (menu bar, standard toolbar, application toolbar, function key assignment)
Screen Painter for designing screens (dynamic programs) for user dialogs
Function Builder for displaying and processing function modules (routines with defined interfaces that are available throughout the system)
Class Builder for displaying and processing ABAP Objects classes
The ABAP Dictionary
Enforces data integrity
Manages data definitions without redundancy
Is tightly integrated with the rest of the ABAP/4 Development Workbench.
Enforcing data integrity is the process of ensuring that data entered into the system is logical, complete, and consistent. When data integrity rules are defined in the ABAP/4 Dictionary, the system automatically prevents the entry of invalid data. Defining the data integrity rules at the dictionary level means they only have to be defined once, rather than in each program that accesses that data.
The following are examples of data lacking integrity:
A date field with a month value of 13
An order assigned to a customer number that doesnt exist
An order not assigned to a customer
Managing data definitions without redundancy is the process of linking similar information to the same data definition. For example, a customer database is likely to contain a customers ID number in several places. The ABAP Dictionary provides the capability of defining the characteristics of a customer ID number in only one place. That central definition then can be used for each instance of a customer ID number.
The ABAP Dictionarys integration with the rest of the development environment enables ABAP programs to automatically recognize the names and characteristics of dictionary objects.
Additionally, the system provides easy navigation between development objects and dictionary definitions. For example, as a programmer, you can double-click on the name of a dictionary object in your program code, and the system will take you directly to the definition of that object in the ABAP/4 Dictionary.
When a dictionary object is changed, a program that references the changed object will automatically reference the new version the next time the program runs. Because ABAP is interpreted, it is not necessary to recompile programs that reference changed dictionary objects.
ABAP Syntax
The syntax of the ABAP programming language consists of the following elements:
Statements
An ABAP program consists of individual ABAP statements. Each statement begins with a keyword and ends with a period.
"Hello World" PROGRAM
WRITE 'Hello World'.
This example contains two statements, one on each line. The keywords are PROGRAM and WRITE. The program displays a list on the screen. In this case, the list consists of the line "My First Program".
The keyword determines the category of the statement. For an overview of the different categories, refer to ABAP Statements.
Formatting ABAP Statements
ABAP has no format restrictions. You can enter statements in any format, so a statement can be indented, you can write several statements on one line, or spread a single statement over several lines.
You must separate words within a statement with at least one space. The system also interprets the end of line marker as a space.
The program fragment
PROGRAM TEST.
WRITE 'This is a statement'.
could also be written as follows:
PROGRAM TEST. WRITE 'This is a statement'.
or as follows:
PROGRAM
TEST.
WRITE
'This is a statement'.
Use this free formatting to make your programs easier to understand.
Special Case: Text Literals
Text literals are sequences of alphanumeric characters in the program code that are enclosed in quotation marks. If a text literal in an ABAP statement extends across more than one line, the following difficulties can occur:
All spaces between the quotation marks are interpreted as belonging to the text literal. Letters in text literals in a line that is not concluded with quotation marks are interpreted by the editor as uppercase. If you want to enter text literals that do not fit into a single line, you can use the & character to combine a succession of text literals into a single one.
The program fragment
PROGRAM TEST.
WRITE 'This
is
a statement'.
inserts all spaces between the quotation marks into the literal, and converts the letters to uppercase.
This program fragment
PROGRAM TEST.
WRITE 'This' &
' is ' &
'a statement'.
combines three text literals into one.
Chained Statements
The ABAP programming language allows you to concatenate consecutive statements with an identical first part into a chain statement.
To concatenate a sequence of separate statements, write the identical part only once and place a colon ( after it. After the colon, write the remaining parts of the individual statements, separating them with commas. Ensure that you place a period (.) after the last part to inform the system where the chain ends.
Statement sequence:
WRITE SPFLI-CITYFROM.
WRITE SPFLI-CITYTO.
WRITE SPFLI-AIRPTO.
Chain statement:
WRITE: SPFLI-CITYFROM, SPFLI-CITYTO, SPFLI-AIRPTO.
In the chain, a colon separates the beginning of the statement from the variable parts. After the colon or commas, you can insert any number of spaces.
You could, for example, write the same statement like this:
WRITE: SPFLI-CITYFROM,
SPFLI-CITYTO,
SPFLI-AIRPTO.
In a chain statement, the first part (before the colon) is not limited to the keyword of the statements.
Statement sequence:
SUM = SUM + 1.
SUM = SUM + 2.
SUM = SUM + 3.
SUM = SUM + 4.
Chain statement:
SUM = SUM + : 1, 2, 3, 4.
Comments
Comments are texts that you can write between the statements of your ABAP program to explain their purpose to a reader. Comments are distinguished by the preceding signs * (at the beginning of a line) and " (at any position in a line). If you want the entire line to be a comment, enter an asterisk (*) at the beginning of the line. The system then ignores the entire line when it generates the program. If you want part of a line to be a comment, enter a double quotation mark (") before the comment. The system interprets comments indicated by double quotation marks as spaces.
PROGRAM SAPMTEST *
WRITTEN BY KARL BYTE, 06/27/1995 *
LAST CHANGED BY RITA DIGIT, 10/01/1995 *
TASK: DEMONSTRATION *
PROGRAM SAPMTEST.
DECLARATIONS *
DATA: FLAG " GLOBAL FLAG
NUMBER TYPE I " COUNTER
PROCESSING BLOCKS *
Advantages of ABAP over Contemporary languages
ABAP OBJECTS
Object orientation in ABAP is an extension of the ABAP language that makes available the advantages of object-oriented programming, such as encapsulation, interfaces, and inheritance. This helps to simplify applications and make them more controllable.
ABAP Objects is fully compatible with the existing language, so you can use existing statements and modularization units in programs that use ABAP Objects, and can also use ABAP Objects in existing ABAP programs.
ABAP Statements an Overview
The first element of an ABAP statement is the ABAP keyword. This determines the category of the statement. The different statement categories are as follows:
Declarative Statements
These statements define data types or declare data objects which are used by the other statements in a program or routine. The collected declarative statements in a program or routine make up its declaration part.
Examples of declarative keywords:
TYPES, DATA, TABLES
Modularization Statements
These statements define the processing blocks in an ABAP program.
The modularization keywords can be further divided into:
· Defining keywords
You use statements containing these keywords to define subroutines, function modules, dialog modules and methods. You conclude these processing blocks using the END statements.
Examples of definitive keywords:
METHOD ... ENDMETHOD, FUNCTION ... ENDFUNCTION, MODULE ... ENDMODULE.
· Event keywords
You use statements containing these keywords to define event blocks. There are no special statements to conclude processing blocks - they end when the next processing block is introduced.
Examples of event key words:
AT SELECTION SCREEN, START-OF-SELECTION, AT USER-COMMAND
Control Statements
You use these statements to control the flow of an ABAP program within a processing block according to certain conditions.
Examples of control keywords:
IF, WHILE, CASE
Call Statements
You use these statements to call processing blocks that you have already defined using modularization statements. The blocks you call can either be in the same ABAP program or in a different program.
Examples of call keywords:
CALL METHOD, CALL TRANSACTION, SUBMIT, LEAVE TO
Operational Statements These keywords process the data that you have defined using declarative statements.
Examples of operational keywords:
MOVE, ADD
Unique Concept of Internal Table in ABAP
Internal tables provide a means of taking data from a fixed structure and storing it in working memory in ABAP. The data is stored line by line in memory, and each line has the same structure. In ABAP, internal tables fulfill the function of arrays. Since they are dynamic data objects, they save the programmer the task of dynamic memory management in his or her programs. You should use internal tables whenever you want to process a dataset with a fixed structure within a program. A particularly important use for internal tables is for storing and formatting data from a database table within a program. They are also a good way of including very complicated data structures in an ABAP program.
Like all elements in the ABAP type concept, internal tables can exist both as data types and as data objects A data type is the abstract description of an internal table, either in a program or centrally in the ABAP Dictionary, that you use to create a concrete data object. The data type is also an attribute of an existing data object.
Internal Tables as Data Types
Internal tables and structures are the two structured data types in ABAP. The data type of an internal table is fully specified by its line type, key, and table type.
Line type
The line type of an internal table can be any data type. The data type of an internal table is normally a structure. Each component of the structure is a column in the internal table. However, the line type may also be elementary or another internal table.
Key
The key identifies table rows. There are two kinds of key for internal tables - the standard key and a user-defined key. You can specify whether the key should be UNIQUE or NON-UNIQUE. Internal tables with a unique key cannot contain duplicate entries. The uniqueness depends on the table access method.
If a table has a structured line type, its default key consists of all of its non-numerical columns that are not references or themselves internal tables. If a table has an elementary line type, the default key is the entire line. The default key of an internal table whose line type is an internal table, the default key is empty.
The user-defined key can contain any columns of the internal table that are not references or themselves internal tables. Internal tables with a user-defined key are called key tables. When you define the key, the sequence of the key fields is significant. You should remember this, for example, if you intend to sort the table according to the key.
Table type
The table type determines how ABAP will access individual table entries. Internal tables can be divided into three types:
Standard tables have an internal linear index. From a particular size upwards, the indexes of internal tables are administered as trees. In this case, the index administration overhead increases in logarithmic and not linear relation to the number of lines. The system can access records either by using the table index or the key. The response time for key access is proportional to the number of entries in the table. The key of a standard table is always non-unique. You cannot specify a unique key. This means that standard tables can always be filled very quickly, since the system does not have to check whether there are already existing entries.
Sorted tables are always saved sorted by the key. They also have an internal index. The system can access records either by using the table index or the key. The response time for key access is logarithmically proportional to the number of table entries, since the system uses a binary search. The key of a sorted table can be either unique or non-unique. When you define the table, you must specify whether the key is to be unique or not. Standard tables and sorted tables are known generically as index tables.
Hashed tables have no linear index. You can only access a hashed table using its key. The response time is independent of the number of table entries, and is constant, since the system access the table entries using a hash algorithm. The key of a hashed table must be unique. When you define the table, you must specify the key as UNIQUE.
Generic Internal Tables
Unlike other local data types in programs, you do not have to specify the data type of an internal table fully. Instead, you can specify a generic construction, that is, the key or key and line type of an internal table data type may remain unspecified. You can use generic internal tables to specify the types of field symbols and the interface parameters of procedures . You cannot use them to declare data objects.
Internal Tables as Dynamic Data Objects
Data objects that are defined either with the data type of an internal table, or directly as an internal table, are always fully defined in respect of their line type, key and access method. However, the number of lines is not fixed. Thus internal tables are dynamic data objects, since they can contain any number of lines of a particular type. The only restriction on the number of lines an internal table may contain are the limits of your system installation. The maximum memory that can be occupied by an internal table (including its internal administration) is 2 gigabytes. A more realistic figure is up to 500 megabytes. An additional restriction for hashed tables is that they may not contain more than 2 million entries. The line types of internal tables can be any ABAP data types - elementary, structured, or internal tables. The individual lines of an internal table are called table lines or table entries. Each component of a structured line is called a column in the internal table.
Choosing a Table Type
The table type (and particularly the access method) that you will use depends on how the typical internal table operations will be most frequently executed.
Standard tables
This is the most appropriate type if you are going to address the individual table entries using the index. Index access is the quickest possible access. You should fill a standard table by appending lines (ABAP APPEND statement), and read, modify and delete entries by specifying the index (INDEX option with the relevant ABAP command). The access time for a standard table increases in a linear relationship with the number of table entries. If you need key access, standard tables are particularly useful if you can fill and process the table in separate steps. For example, you could fill the table by appending entries, and then sort it. If you use the binary search option with key access, the response time is logarithmically proportional to the number of table entries.
Sorted tables
This is the most appropriate type if you need a table which is sorted as you fill it. You fill sorted tables using the INSERT statement. Entries are inserted according to the sort sequence defined through the table key. Any illegal entries are recognized as soon as you try to add them to the table. The response time for key access is logarithmically proportional to the number of table entries, since the system always uses a binary search. Sorted tables are particularly useful for partially sequential processing in a LOOP if you specify the beginning of the table key in the WHERE condition.
Hashed tables
This is the most appropriate type for any table where the main operation is key access. You cannot access a hashed table using its index. The response time for key access remains constant, regardless of the number of table entries. Like database tables, hashed tables always have a unique key. Hashed tables are useful if you want to construct and use an internal table which resembles a database table or for processing large amounts of data.
Advanced Topics
Batch Input: Concepts
Processing Sessions
The above figure shows how a batch input session works.A batch input session is a set of one or more calls to transactions along with the data to be processed by the transactions. The system normally executes the transactions in a session non-interactively, allowing rapid entry of bulk data into an R/3 System.
A session records transactions and data in a special format that can be interpreted by the R/3 System. When the System reads a session, it uses the data in the session to simulate on-line entry of transactions and data. The System can call transactions and enter data using most of the facilities that are available to interactive users.
For example, the data that a session enters into transaction screens is subject to the same consistency checking as in normal interactive operation. Further, batch input sessions are subject to the user-based authorization checking that is performed by the system.
Advantages of ABAP over Contemporary languages
ABAP Objects offers a number of advantages, even if you want to continue using procedural programming. If you want to use new ABAP features, you have to use object-oriented interfaces anyway.
Sharing Data: With ABAP shared objects, you can aggregate data once at a central location and the different users and programs can then access this data without the need for copying.
Exception Handling: With the class-based exception concept of ABAP, you can define a special control flow for a specific error situation and provide the user with information about the error.
Developing Persistency: For permanent storage of data in ABAP, you use relational database tables by means of database-independent Open SQL, which is integrated in ABAP. However, you can also store selected objects transparently or access the integrated database or other databases using proprietary SQL.
Connectivity and Interoperability: The Exchange Infrastructure and Web services are the means by which developers can implement a service-oriented architecture. With Web services, you can provide and consume services independently of implementation or protocol. Furthermore, you can do so within NetWeaver and in the communication with other systems. With the features of the Exchange Infrastructure, you can enable, manage, and adapt integration scenarios between systems.
Making Enhancements: With the Enhancement Framework, you can enhance programs, function modules, and global classes without modification as well as replace existing code. The Switch Framework enables you activate only specific development objects or enhancements in a system.
Considerable Aspects
It follows a list of aspects to be considered during development. The list of course is not complete.
Dynpro persistence
When implementing dynpros one has to care for himself to read out and persist the necessary fields. Recently it happened to me that I forgot to include a field into the UPDATE-clause which is an error not so easy to uncover if you have other problems to be solved in the same package. Here, tool-support or built-in mechanisms would help.
The developer could help himself out by creating something like a document containing a cookbook or guide in which parts of a dynpro logic one has to care about persistence. With that at hand, it would be quite easy finding those bugs in short time. Maybe a report scanning for the definition of the dynpro fields to be persisted could scan the code automatically, too.
Memory Cache
It should be common-sense that avoiding select-statements onto the database helps reducing the server load. For that the programmer either can resort to function modules if available. This maybe is the case for important tables. Or the programmer needs to implement his own logic using internal tables. Here, the standard software package could provide the developer with a tool or a mechanism auto-generating memory cached tables resp. function modules implementing this.
Sometimes buffering of database tables could be used, if applicable. But that would require an effort in customizing the system and could drain down system performance overall, especially if a table is involved that has a central role.
Interfaces
It should be noticed that some function modules available have an incomplete interface. That means, the interface does not include all parameters evaluated by the logic of the function module. For example, global variables from within the function group could be read out, which cannot be influenced by the general caller. Or memory parameters are used internally to feed the logic with further information.
One workaround here would be copying the relevant parts of the logic to a newly created function module and then adapt it to the own context. This sometimes is possible, maybe if the copied code is not too lengthy and only a few or no calls to other logic is part of it.
A modification of the SAP code could be considered, if the modification itself is unavoidable (or another solution would be not justifiable by estimated effort to spend on it) and if the location of the modification seems quite safe against future upgrades or hot fixes. The latter is something that could be evaluated by contacting the SAP hotline or working with OSS message (searching thru existing one, perhaps open a new one).
Example
'From SAP NetWeaver:'
set an exclusive lock at level object-type & object-id
IF NOT lf_bapi_error = true.
IF ( NOT istourhd-doc_type IS INITIAL ) AND
( NOT istourhd-doc_id IS INITIAL )
CALL FUNCTION 'ENQUEUE_/DSD/E_HH_RAREF'
EXPORTING
obj_typ = istourhd-doc_type
obj_id = istourhd-doc_id
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc <> 0.
terminate processing...
lf_bapi_error = true.
...and add message to return table
PERFORM set_msg_to_bapiret2
USING sy-msgid gc_abort sy-msgno
sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
gc_istourhd gc_enqueue_refdoc space
CHANGING lt_return.
ENDIF.
ENDIF.
ENDIF. " bapi error
Example Report(Type - ALV(Advanced List Viewer))
REPORT Z_ALV_SIMPLE_EXAMPLE_WITH_ITAB .
*Simple example to use ALV and to define the ALV data in an internal
*table
*data definition
tables:
marav. "Table MARA and table MAKT
Data to be displayed in ALV
Using the following syntax, REUSE_ALV_FIELDCATALOG_MERGE can auto-
matically determine the fieldstructure from this source program
Data:
begin of imat occurs 100,
matnr like marav-matnr, "Material number
maktx like marav-maktx, "Material short text
matkl like marav-matkl, "Material group (so you can test to make
" intermediate sums)
ntgew like marav-ntgew, "Net weight, numeric field (so you can test to
"make sums)
gewei like marav-gewei, "weight unit (just to be complete)
end of imat.
Other data needed
field to store report name
data i_repid like sy-repid.
field to check table length
data i_lines like sy-tabix.
Data for ALV display
TYPE-POOLS: SLIS.
data int_fcat type SLIS_T_FIELDCAT_ALV.
select-options:
s_matnr for marav-matnr matchcode object MAT1.
start-of-selection.
read data into table imat
select * from marav
into corresponding fields of table imat
where
matnr in s_matnr.
Check if material was found
clear i_lines.
describe table imat lines i_lines.
if i_lines lt 1.
Using hardcoded write here for easy upload
write: /
'No materials found.'.
exit.
endif.
end-of-selection.
To use ALV, we need a DDIC-structure or a thing called Fieldcatalogue.
The fieldcatalouge can be generated by FUNCTION
'REUSE_ALV_FIELDCATALOG_MERGE' from an internal table from any
report source, including this report.
Store report name
i_repid = sy-repid.
Create Fieldcatalogue from internal table
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = i_repid
I_INTERNAL_TABNAME = 'IMAT' "capital letters!
I_INCLNAME = i_repid
CHANGING
CT_FIELDCAT = int_fcat
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3.
*explanations:
I_PROGRAM_NAME is the program which calls this function
I_INTERNAL_TABNAME is the name of the internal table which you want
to display in ALV
I_INCLNAME is the ABAP-source where the internal table is defined
(DATA....)
CT_FIELDCAT contains the Fieldcatalouge that we need later for
ALV display
IF SY-SUBRC <> 0.
write: /
'Returncode',
sy-subrc,
'from FUNCTION REUSE_ALV_FIELDCATALOG_MERGE'.
ENDIF.
*This was the fieldcatlogue
Call for ALV list display
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = i_repid
IT_FIELDCAT = int_fcat
TABLES
T_OUTTAB = imat
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
*explanations:
I_CALLBACK_PROGRAM is the program which calls this function
IT_FIELDCAT (just made by REUSE_ALV_FIELDCATALOG_MERGE) contains
now the data definition needed for display
I_SAVE allows the user to save his own layouts
T_OUTTAB contains the data to be displayed in ALV
IF SY-SUBRC <> 0.
write: /
'Returncode',
sy-subrc,
'from FUNCTION REUSE_ALV_LIST_DISPLAY'.
ENDIF.
OOPs ABAP uses Classes and Interfaces which uses Methods and events.
If you have Java skills it is advantage for you.
There are Local classes as well as Global Classes.
Local classes we can work in SE38 straight away.
But mostly it is better to use the Global classes.
Global Classes or Interfaces are to be created in SE24.
SAP already given some predefined classes and Interfaces.
This OOPS concepts very useful for writing BADI's also.
So first create a class in SE 24.
Define attributes, Methods for that class.
Define parameters for that Method.
You can define event handlers also to handle the messages.
After creation in each method write the code.
Methods are similar to ABAP PERFORM -FORM statements.
After the creation of CLass and methods come to SE38 and create the program.
In the program create a object type ref to that class and with the help of that Object call the methods of that Class and display the data.
Regards
Anji

Difference between sy-tabix and sy-index?

tell me about sy-tabix and sy-index?what is the difference between sy-tabix and sy-index?
Moderator Message: Please search before posting. Read the [Forum Rules Of Engagement |https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] for further details.
Edited by: Suhas Saha on Jun 18, 2011 5:33 PM

HI,
Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
SY-TABIX
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY-INDEX
In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
Hope this helps.
Thank you,
Pavan.

The difference between system restore and last good known configuration

hi,
what is the difference between system restore and last good known configuration.
in which situation you use system restore ,and in which situation you use last good known configuration.
very short answer wil be enough.
thanks
johan
h.david

Last Known Good Configuration deals only with Starting Windows eg. a bad registry or incorrect driver is preventing Windows to start.It recovers the registry settings of HKEY_LOCAL_MACHINE\System\CurrentControlSet
While System Restore uses restore points to return your system files and settings to an earlier point in time without affecting personal files. Restore points are created automatically every week, and just before significant system events, such as the installation
of a program or device driver. You can also create a restore point manually.You can undone system restore but there is no such option in Last Known Good Configuration.
Last Known Good Configuration is disabled in Windows 8 or,Windows 8.1 by default.
Try using Last Known Good Configuration if you can't start Windows, but it started correctly the last time you turned on the computer.
Try using System Restore to return the system to an earlier point in time when things worked correctly.
S.Sengupta, Windows Entertainment and Connected Home MVP

What is difference between User Exits and BAPI

hello sap gurus
what is difference between User Exits and BAPIs

http://www.sap-img.com/abap/what-is-user-exits.htm
www.****************
Where as this customer exits are again divided into:
1. Menu Exits.
2. Field Exits.
3. Screen Exits.
4. Function module exits.
These all the things comes under Enhancements.
User exits
1.A user exit is a three character code that instructs the system to access a program during system processing.SXX: S is for standard exits that are delivered by SAP.
XX represents the 2-digit exit number.UXX: U is for user exits that are defined by the user. XX represents the 2-digit exit number
2.USER EXITS are FORMS and are called by SAP standard programs
using PERFORM.
3.Inside the form (user exit) you can read and change almost
any global data from host program.
4. User exits are more flexible because you have more information to use in your code but on the other hand , it is very easy to manipulate erroneously global data and lead the standard program to a dump or even to make database inconsistent.
5.While changing User-exit,Access Key is required,
BAPI is nothing function module but which is remote enabled, means you can access this fm through other SAP or non-SAP system by assingning to business object,which we can crea in SWO1 transaction.
more details see WWW.****************
reward if helpful

What is difference between Shared ,Exclusive and Exclusive but not commulat

what is difference between Shared ,Exclusive and Exclusive but not commulative lock modes plese tell me

Lock objects are used to synchronize access to the same data by more than one program.
The lock mode controls whether several users can access data records at the same time. The lock mode can be assigned separately for each table in the lock object. When the lock is set, the corresponding lock entry is stored in the lock table of the system for each table.
There are three types of lock modes
1.Exclusive
2.Shared
3.Exclusive not cummulative
Exclusive lock: The locked data can only be displayed or edited by a single user. A request for another exclusive lock or for a shared lock is rejected.
Shared lock: More than one user can access the locked data at the same time in display mode. A request for another shared lock is accepted, even if it comes from another user. An exclusive lock is rejected.
Exclusive but not cumulative: Exclusive locks can be requested several times from the same transaction and are processed successively. In contrast, exclusive but not cumulative locks can be called only once from the same transaction. All other lock requests are rejected.
please go through these links:
http://help.sap.com/saphelp_nw04/helpdata/en/a2/3547360f2ea61fe10000009b38f839/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/af/22ab01dd0b11d1952000a0c929b3c3/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eeb2446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eebf446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eed9446011d189700000e8322d00/frameset.htm
briefly :
You can lock the table or record by using following types of locking:
1) Exclusive (E) the locked data can only be displayed or modified by single user i.e the owner of the object. Access to other users is denied.
2) Shared (S) several users can access the same record simultaneously, but only in display mode and except the first one, who has asked for the data in update mode.
3) Exclusive not cumulating (X) it is similar to exclusive lock. It allows only a single user access. E can be called several times from the same transaction. In contrast, a lock type X can be called only once during the transaction. Any other call for this lock is rejected.
Activation of Lock Object
1) When you activate the lock object, the functions are automatically generated. And these are ENQUEUE-EZN and DEQUEUE-EZN. EZN is name of the lock object.
2) While ENQUEUE is used in program to set the code over the selected data depending upon the lock object arguments. DEQUEUE is used to release the lock.
Thanks
Seshu

What is difference between Startup upgrade and startup migration.

what is difference between Startup upgrade and startup migration.

I am having the metalink note.
STARTUP MIGRATE was introduced in 9.2 as a mechanism to be sure that most everything that needs to be done to run an upgrade script or a patch script is done automatically. In the past, customers were expected to adjust certain initialization parameters prior to beginning an upgrade or applying a a patch,
but most of this is now done automatically by STARTUP MIGRATE.
When a customer starts a database in MIGRATE mode, the following ALTER SYSTEM
commands will be set automatically:
But i am not sure what exactly the meaning by startup upgrade.
and exactly the startup upgrade and startup migrate

Difference between primary eindex and secondary index?

hi experts
pls answer me
difference between primary eindex and secondary index?
rewads apply.
thanks.
naresh.

hi,
check this link.
http://help.sap.com/saphelp_47x200/helpdata/en/cf/21eb2d446011d189700000e8322d00/frameset.htm
A difference is made between Primary & Secondary indexes to a table. the primary index consists of the key fields of the table and a pointer to the non-keys-fields of the table. The Primary index is generated automatically when a table is created and is created in the datebase as the same times as the table. It is also possible to define further indexes to a table in the ABAP/4 dictionary, which are then referred to as Secondary indexes.
Always it is not mandatory that an index should have all the key fields of a table. To see the index of a table
goto SE11->specify table name->click on the indexes... button on the application toolbar.
Based on your requirement you can you any of those index fields in the where clause of your query. Always its a better practice to use the index fields in the order specified. While selecting the records from a table it is always better to select the fields in the same order as specified in the table.

Difference between "REBUILD ONLINE" and "REBUILD" while altering index

Similar Messages

Maybe you are looking for