Difference between relay and remote?

I have (4) Airport Expresses connected via WDS to an Airport Extreme Base Station. What's the difference between setting up an Airport Express as a remote vs a relay? Thanks!

Since you have all "n" AirPorts, I suggest (for better performance) that you take advantage of this model's "extend a network" feature instead of attempting a 802.11g WDS configuration. If you don't get the coverage at the 2nd floor guest room that you are looking for, we can reconfigure for the WDS.
With the "extend" method, you can add additional "n" AirPorts to the main in a "star" pattern for coverage, but you would not be able to daisy-chain them like in the 802.11g WDS where you use relays & remotes.
If this sounds like it's worth a try, the following is the basic setup steps:
o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
o Open AirPort Utility and select the base station that will connect to the Internet.
o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.
(ref: Page 46 of "Designing AirPort Networks Using AirPort Utility.)

Similar Messages

Difference between BAPI and remote enabled function module

Hi!
what is the difference between remote enabled function module and
BAPI.
How do we use remote enabled function module .
thanks
Amit

Please search the forum before asking basic questions.

Help me clarify: Difference between Joining and Extending Wireless Network

I've eventually figured out how to get my AirPort Express to allow my Mac Pro access to the internet Via Ethernet cable by joining an existing wireless network. What's the difference between that and extending it? By extending it I loose my ability to use the ethernet to connect to internet on my Mac Pro. Odd thing is though when I initially used AirPort Utility to set up my AirPort Express, I went through all the options to get it configured to access my existing network and I checked option to allow internet access through ethernet. All is well, but then I still don't have access to the internet through the ethernet and I noticed that the setting is on Extended. Just curious why it would give me the option to use the ethernet, set it on extended and not even work.

I've eventually figured out how to get my AirPort Express to allow my Mac Pro access to the internet Via Ethernet cable by joining an existing wireless network. What's the difference between that and extending it?
When "joining a network," the AirPort Express Base Station (AX) acts just like any other wireless client (laptop, desktop, printer, etc.) You would want to configure the AX to join a network when you only want to use it to share a USB printer and/or stream iTunes.
When "extending a network," the AX can perform as either a main, relay, or remote base station in a Wireless Distribution System (WDS). A WDS is primarily used to extend a network wirelessly.
By extending it I loose my ability to use the ethernet to connect to internet on my Mac Pro.
If the AX is configured as either a relay/remote base station in a WDS, you actually can use it's Ethernet port for Internet access. Of course, this relay/remote must be connected to a main base station, that itself, has Internet access.

Difference Between BAPI And RFC in ABAP

Hi,
i want to know difference between BAPI and RFC in SAP,
can we call SAP GUI screen from NON SAP System Using BAPI.
Reg,
Hariharan

Hi Ravishankar,
The difference is not importat while you understand the concept.
I think, RFC is the protocol for calling functions from external systems in R/3.
I understand like BAPI a series of complet functions that SAP offers you for use and model a business use.
But if I need program a function that can be called for external system i would call it RFC_NAME, because is a unique function that makes a single task.
In other words, the difference i think is about work idea more than another thing.
RFC
A remote function call is a call to a function module running in a system different from the caller's. The remote function can also be called from within the same system (as a remote call).
RFC consists of two interfaces : A calling interface for ABAP Programs and a calling interface for Non-SAP programs.
The RFC Interface takes care of :-
- Converting all parameter data to the representation needed in the remote system
Calling the communication routines needed to talk to the remote system.
Handling communications errors, and notifying the caller, if desired ( using EXCEPTIONS paramater of the CALL FUNCTION).
BAPI
BAPIs are standardized programming interfaces (methods) enabling external applications to access business processes and data in the R/3 System.
BAPIs provide stable and standardized methods to achieve seamless integration between the R/3 System and external applications, legacy systems and add-ons.
BAPIs are defined in the BOR(Business object repository) as methods of SAP business object types that carry out specific business functions.
BAPIs are implemented as RFC-enabled function modules and are created in the Function Builder of the ABAP Workbench.
The most critical difference btwn BAPI and FM is that BAPI can be wrapped in Business objects whereas RFC cant.
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
The following standardized BAPIs are provided:
Reading instances of SAP business objects
GetList ( ) With the BAPI GetList you can select a range of object key values, for example, company codes and material numbers.
The BAPI GetList() is a class method.
GetDetail() With the BAPI GetDetail() the details of an instance of a business object type are retrieved and returned to the calling program. The instance is identified via its key. The BAPI GetDetail() is an instance method. BAPIs that can create, change or delete instances of a business object type
The following BAPIs of the same object type have to be programmed so that they can be called several times within one transaction. For example, if, after sales order 1 has been created, a second sales order 2 is created in the same transaction, the second BAPI call must not affect the consistency of the sales order 2. After completing the transaction with a COMMIT WORK, both the orders are saved consistently in the database.
Create( ) and CreateFromData! ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type, for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type, for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type. The instance to be cancelled remains in the database and an additional instance is created and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst! ance and the BAPI and Remove<subobject> removes a subobject from an object instance. These BAPIs are instance methods.
Check these Links out
http://searchsap.techtarget.com/ateQuestionNResponse/0,289625,sid21_cid558752_tax293481,00.html
http://www.sap-img.com/abap/interview-question-on-bapi-rfc-abap-objects-tables.htm
http://www.sap-img.com/fu033.htm
http://www.sap-img.com/abap/ale-bapi.htm
Refer following SDN threads:
Diff. Between BAPI and RFC
Re: BAPI and RFC
Hope this resolves your query.
Reward all the helpful answers.
Regards

Difference between tRFC and RFC

Hi Experts,
Can any one help me in details to differentiate tRFC from RFC in their application perspective.
And also let me know the role of ALE and BAPI in both the connection log.ie,Where we have to use ALE and BAPI.
Regards
Kumar

Hi,
RFC = Remote Function Call and TRFC = Transactional Remote Function Call
Transactional RFC and Queued RFC are variants of the Remote Function Call that make the data transfer between different SAP R/3 systems more reliable and more secure.
Transactional RFC
http://help.sap.com/saphelp_nw04/helpdata/en/8b/ceea3b31aac554e10000000a114084/content.htm
RFC Help link
http://help.sap.com/saphelp_nw04/helpdata/en/b0/eae2a889e711d2956500a0c94260a5/frameset.htm
Refer BAPI & ALE
what is difference between BAPI and ALE
Re: ALE & BAPI communication
Re: bapi-ale interface
/Srinivas

Difference between idoc and rfc

what is the difference between idoc and rfc? when and where it is used? when there is idoc, why rfc vice versa?

IDoc (for intermediate document) is a standard data structure for electronic data interchange (EDI) between application programs written for the popular SAP business system or between an SAP application and an external program. IDocs serve as the vehicle for data transfer in SAP's Application Link Enabling (ALE) system.
IDocs are used for asynchronous transactions: Each IDoc generated exists as a self-contained text file that can then be transmitted to the requesting workstation without connecting to the central database.
Another SAP mechanism, the Business Application Programming Interface (BAPI) is used for synchronous transactions.
A large enterprise's networked computing environment is likely to connect many geographically distributed computers to the main database. These computers are likely to use different hardware and/or operating system platforms. An IDoc encapsulates data so that it can be exchanged between different systems without conversion from one format to another.
IDoc types define different categories of data, such as purchase orders or invoices, which may then be broken down into more specific categories called message types. Greater specificity means that an IDoc type is capable of storing only the data required for a particular transaction, which increases efficiency and decreases resource demands.
An IDoc can be generated at any point in a transaction process. For example, during a shipping transaction process, an IDoc may be generated that includes the data fields required to print a shipping manifest. After a user performs an SAP transaction, one or more IDocs are generated in the sending database and passed to the ALE communication layer. The communication
layer performs a Remote Function Call (RFC), using the port definition and RFC destination specified by the customer model.
The IDoc is transmitted to the receiver, which may be an R/3, R/2, or some external system
RFC
Remote Function Calls (RFC) and data exchange through IDoc message documents. RFC makes direct and synchronous calls of a program in the remote system. If the caller is an external program it will call an RFC-enabled function in R/3 and if the calling program is the R/3 system it will call an RFC-function in another R/3-system or it will call a non-R/3 program through a gateway-proxy (usually rfcexec.exe). BAPIs are a subset of the RFC-enabled function modules, especially designed as Application Programming Interface (API) to the SAP business object, or in other words: are function modules officially released by SAP to be called from external programs.
note:reward points if solution found helpfull.....
regards
chandrakanth.k

Difference Between BAPI and RFM

Dear Friends,
I have seen a few thread explaining the difference between BAPI and RFM(Remote-enabled function Modules) from functional point of view. I know that there are cases when both are available in BOR. Both can be implement using Object Oriented Technology.
Can any tell me how they differ from techincal point of view ? OR Are they same techinically ?
Thanks in advance,
Rajesh

hi,
Remote Function Call:
RFC is an SAP interface protocol.
Based on CPI-C, it considerably simplifies the programming of communication processes between systems.
RFCs enable you to call and execute predefined functions in a remote system - or even in the same system.
RFCs manage the communication process, parameter transfer and error handling.
http://help.sap.com/saphelp_47x200/helpdata/en/22/042860488911d189490000e829fbbd/frameset.htm.
BAPI
BAPI stands for Business API(Application Program Interface).
A BAPI is remotely enabled function module
ie it can be invoked from remote programs like standalone JAVA programs, web interface etc..
You can make your function module remotely enabled in attributes of Function module but
A BAPI are standard SAP function modules provided by SAP for remote access.
Also they are part of Businees Objest Repository(BOR).
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects.
You create business objects and those are then registered in your BOR (Business Object Repository)
which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA.
In this case u only specify the business object and its method from external system
in BAPI there is no direct system call. while RFC are direct system call.
Some BAPIs provide basic functions and can be used for most SAP business object types.
These BAPIs should be implemented the same for all business object types.
Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs.
Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
Regards
Reshma

Differences between rfc and ale/idoc.

hi ..
       will u please send the differences between rfc and ale/idoc's.

Hi,
Please reward with points if helpful................
ALE is SAP proprietary technology that enables data communications between two or more SAP R/3 systems and/or R/3 and external systems. There are three layers in ALE system: application services, distribution services, and communication services.
For communication services, ALE performs a Remote Function Call (RFC) using the port definition and RFC destination specified by the customer model. RFC is used to communicate between applications of different systems in the SAP environment includes connections between SAP systems as well as between SAP systems and non-SAP systems. Remote Function Call (RFC) is the standard SAP interface for communication between SAP systems. The RFC calls a function to be executed in a remote system.
Means of creating and operating distributed applications.
The purpose of Application Line Enabling is to guarantee a distributed, but integrated, R/3 installation. This involves business-controlled message exchange with consistent data across loosely linked SAP applications.
Application integration is achieved not via a central database, but via synchronous and asynchronous communication.
Application Link Enabling comprises the following three layers:
application services
distribution services
communication services
Two Development Models
     Distribution using BAPIs
     Distribution using Message type
The programming model "Distribution using message types" contains the definitions of message types and IDoc types and the ABAP code for processing inbound and outbound IDocs.
Defining message types and IDoc types:
If you want to create message type enhancements for master data distribution, you also have to create a new message type for each enhancement.
The ALE interface does not allow you to create different segment data for different IDoc types for the same message type.
Writing ABAP code:
         Outbound Processing
           Inbound Processing
You can find information on other ALE functions under:
                               Master Data Distribution
                              Communicating with Non-R/3 Systems
1. The Remote Function Call facility allows you to call an R/3 Function module on a remote machine.
2. To communicate between two R/3 Systems and also with an External System. External Application program also can call these function module for integration.
3. RFC or sRFC - Synchronous RFC
                 aRFC - Asynchronous RFC
                  tRFC - Transactional RFC
                  qRFC - Queued RFC (I.e. Serialization of tRFC)
Types of RFC Call
Synchronous
CALL FUNCTION Func Destination Dest
CALL FUNCTION func DESTINATION 'NONE' ...
CALL FUNCTION func DESTINATION BACK' ...
Asynchronous
CALL FUNCTION func STARTING NEW TASK taskname
PERFORMING form ON END OF TASK
RECEIVE RESULTS FROM FUNCTION func
Thanks
sivaparvathi

What is the difference between rfc and idoc

hi,
My name is rambabu.can anyone of u please tell me the main differences between idoc and rfc??
Thanks in Advance

hi Ramesh,
Remote Function Calls (RFC) and data exchange through IDoc
message documents. RFC makes direct and synchronous calls of a program in
the remote system. If the caller is an external program it will call an
RFC-enabled function in R/3 and if the calling program is the R/3 system
it will call an RFC-function in another R/3-system or it will call a
non-R/3 program through a gateway-proxy (usually rfcexec.exe). BAPIs are
a subset of the RFC-enabled function modules, especially designed as
Application Programming Interface (API) to the SAP business object, or in
other words: are function modules officially released by SAP to be called
from external programs.
IDocs are text encoded documents with a rigid structure that are used to
exchange data between R/3 and a foreign system. Instead of calling a
program in the destination system directly, the data is first packed into
an IDoc and then sent to the receiving system, where it is analyzed and
properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls
and IDoc data exchange is the fact, that every action performed on IDocs
are protocolled by R/3 and IDocs can be reprocessed if an error occurred
in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE
are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to
deliver data to the receiving system. ALE is basically the scheduling
mechanism that defines when and between which partners and what kind of
data will be exchanged on a regular or event triggered basis. Such a
set-up is called an ALE-scenario.
Regards
Sreeram.G.Reddy

MAIN DIFFERENCES BETWEEN PARALLEL AND SEQUENTAIL PRCESSING???

HI PALS,
I WANT THE COMPLETE DIFFERENCES BETWEEN PARALLEL AND SEQUENTIAL PROCESSING!
IN THE CONTEXT OF RFC.

Hi
Parallel Processing
To achieve a balanced distribution of the system load, you can use destination additions to execute function modules in parallel tasks in any application server or in a predefined application server group of an SAP system.
Parallel-processing is implemented with a special variant of asynchonous RFC. Itu2019s important that you use only the correct variant for your own parallel processing applications: the CALL FUNCTION STARTING NEW TASK DESTINATION IN GROUP keyword. Using other variants of asynchronous RFC circumvents the built-in safeguards in the correct keyword, and can bring your system to its knees
Details are discussed in the following subsections:
·        Prerequisites for Parallel Processing
·        Function Modules and ABAP Keywords for Parallel Processing
·        Managing Resources in Parallel Processing
Prerequisites for Parallel Processing
Before you implement parallel processing, make sure that your application and your SAP system meet these requirements:
·        Logically-independent units of work:
The data processing task that is to be carried out in parallel must be logically independent of other instances of the task. That is, the task can be carried out without reference to other records from the same data set that are also being processed in parallel, and the task is not dependent upon the results of others of the parallel operations. For example, parallel processing is not suitable for data that must be sequentially processed or in which the processing of one data item is dependent upon the processing of another item of the data.
By definition, there is no guarantee that data will be processed in a particular order in parallel processing or that a particular result will be available at a given point in processing.
·        ABAP requirements:
¡        The function module that you call must be marked as externally callable. This attribute is specified in the Remote function call supported field in the function module definition (transaction SE37).
¡        The called function module may not include a function call to the destination u201CBACK.u201D
¡        The calling program should not change to a new internal session after making an asynchronous RFC call. That is, you should not use SUBMIT or CALL TRANSACTION in such a report after using CALL FUNCTION STARTING NEW TASK.
¡        You cannot use the CALL FUNCTION STARTING NEW TASK DESTINATION IN GROUP keyword to start external programs.
·        System resources:
In order to process tasks from parallel jobs, a server in your SAP system must have at least 3 dialog work processes. It must also meet the workload criteria of the parallel processing system: Dispatcher queue less than 10% full, at least one dialog work process free for processing tasks from the parallel job.
Function Modules and ABAP Keywords for Parallel Processing
You can implement parallel processing in your applications by using the following function modules and ABAP keywords:
·        SPBT_INITIALIZE: Optional function module.
Use to determine the availability of resources for parallel processing.
You can do the following:
¡        check that the parallel processing group that you have specified is correct.
¡        find out how many work processes are available so that you can more efficiently size the packets of data that are to be processed in your data.
·        CALL FUNCTION Remotefunction STARTING NEW TASK Taskname DESTINATION IN GROUP:
With this ABAP statement, you are telling the SAP system to process function module calls in parallel. Typically, youu2019ll place this keyword in a loop in which you divide up the data that is to be processed into work packets. You can pass the data that is to be processed in the form of an internal table (EXPORT, TABLE arguments). The keyword implements parallel processing by dispatching asynchronous RFC calls to the servers that are available in the RFC server group specified for the processing.
Note that your RFC calls with CALL FUNCTION are processed in work processes of type DIALOG. The DIALOG limit on processing of one dialog step (by default 300 seconds, system profile parameter rdisp/max_wprun_time) applies to these RFC calls. Keep this limit in mind when you divide up data for parallel processing calls.
·        SPBT_GET_PP_DESTINATION: Optional function module.
Call immediately after the CALL FUNCTION keyword to get the name of the server on which the parallel processing task will be run.
·        SPBT_DO_NOT_USE_SERVER: Optional function module.
Excludes a particular server from further use for processing parallel processing tasks. Use in conjunction with SPBT_GET_PP_DESTINATION if you determine that a particular server is not available for parallel processing (for example, COMMUNICATION FAILURE exception if a server becomes unavailable).
·        WAIT: ABAP keyword
WAIT UNTIL
Required if you wish to wait for all of the asynchronous parallel tasks created with CALL FUNCTION to return. This is normally a requirement for orderly background processing. May be used only if the CALL FUNCTION includes the PERFORMING ON RETURN addition.
·        RECEIVE: ABAP keyword
RECEIVE RESULTS FROM FUNCTION Remotefunction
Required if you wish to receive the results of the processing of an asynchronous RFC. RECEIVE retrieves IMPORT and TABLE parameters as well as messages and return codes.
Managing Resources in Parallel Processing
You use the following destination additions to perform parallel execution of function modules (asynchronous calls) in the SAP system:
In a predefined group of application servers:
CALL FUNCTION Remotefunction STARTING NEW TASK Taskname
DESTINATION IN GROUP Groupname
In all currently available and active application servers:
CALL FUNCTION Remotefunction STARTING NEW TASK Taskname
DESTINATION IN GROUP DEFAULT
Sequential Processing
In the following cases, the system chooses sequential (non-parallel) processing:
●      In table RSADMIN, entry QUERY_MAX_WP_DIAG has value (column value) 1.
●      The entire query consists of one sub-access only.
●      The query is running in a batch process.
●      The query was started from the query monitor (transaction RSRT) using various debug options (for example, SQL query display, execution plan display). See, Dividing a MultiProvider Query into Sub-Queries.
●      The query requests non-cumulative key figures.
●      Insufficient dialog processes are available when the query is executed. These are required for parallel processing.
●      The query is configured for non-parallel processing.
●      You want to save the result of the query in a file or a table.
In Release SAP NetWeaver 7.0, the system can efficiently manage the large intermediate results produced by parallel processing. In previous releases, the system terminated when it reached a particular intermediate result size and proceeded to read data sequentially. This is no longer the case. Therefore, the RSADMIN parameter that was used in previous releases for reading a MultiProvider sequentially is no longer used.
Reward If Helpfull,
Naresh

What is the difference between ntp and ctssd ?

hello everyone
could you please describe the difference between ntp and ctssd? which one should be used?
thanks
John

ntp is OS level service which synchronize the system clock with a remote server over the Network Time Protocol (NTP).
CSSD oracle processes (Cluster Services Synchronization Daemon) monitor the health of RAC nodes employing two distinct heart beats: Network heart beat and Disk heart beat. Healthy nodes will have continuous network and disk heartbeats exchanged between the nodes.

Difference between rmid and rmiregistry

Hi,
I want to know ehats the difference between rmid and rmiregistry?
where is rmid used?

rmid is for the activation framework.
rmiregistry simply contains mapping between strings (the key) and remote object.

Whats the difference between ALL and FIRST in Multi Inserting

SQL> Drop Table Sales;
Table dropped.
SQL> Drop Table Accounts;
Table dropped.
SQL> Drop Table Research;
Table dropped.
SQL> Create Table Sales As Select * From Emp;
Table created.
SQL> Create Table Accounts As Select * From Emp;
Table created.
SQL> Create Table Research As Select * From Emp;
Table created.
SQL> Truncate Table Sales;
Table truncated.
SQL> Truncate Table Accounts;
Table truncated.
SQL> Truncate Table Research;
Table truncated.
SQL> Select * From Sales;
no rows selected
SQL> Select * From Accounts;
no rows selected
SQL> Select * From Research;
no rows selected
SQL> Insert All
2 When Deptno=10 Then
3 Into Sales (Empno,Ename,Job,Mgr,Hiredate,Sal,Comm,DeptNo)
4 When Deptno=20 Then
5 Into Accounts (Empno,Ename,Job,Mgr,Hiredate,Sal,Comm,DeptNo)
6 When Deptno=30 Then
7 Into Research (Empno,Ename,Job,Mgr,Hiredate,Sal,Comm,DeptNo)
8 Select * From Emp
9 .
SQL> /
16 rows created.
SQL> Select * From Sales;
    EMPNO ENAME      JOB             MGR HIREDATE        SAL      COMM    DEPTNO
     7782 CLARK      MANAGER        7839 09-JUN-81       100                  10
     7839 KING       PRESIDENT           17-NOV-81       100                  10
     7934 MILLER     CLERK          7782 23-JAN-82       100                  10
     7999 ABCDEFGH   JOB            7839 09-FEB-06       100         0        10
4 rows selected.
SQL> Select * From Accounts;
    EMPNO ENAME      JOB             MGR HIREDATE        SAL      COMM    DEPTNO
     7901 SMITH      CLERK          7902 17-DEC-80       100                  20
     7566 JONES      MANAGER        7839 02-APR-81       100                  20
     7788 SCOTT      ANALYST        7566 19-APR-87       100                  20
     7876 ADAMS      CLERK          7788 23-MAY-87       100                  20
     7902 FORD       ANALYST        7566 03-DEC-81       100                  20
      123                                                                     20
6 rows selected.
SQL> Select * From Research;
    EMPNO ENAME      JOB             MGR HIREDATE        SAL      COMM    DEPTNO
     7499 ALLEN      SALESMAN       7698 20-FEB-81       100       300        30
     7521 WARD       SALESMAN       7698 22-FEB-81       100       500        30
     7654 MARTIN     SALESMAN       7698 28-SEP-81       100      1400        30
     7698 BLAKE      MANAGER        7839 01-MAY-81       100                  30
     7844 TURNER     SALESMAN       7698 08-SEP-81       100         0        30
     7900 JAMES      MANAGER        7698 03-DEC-81       100                  30
6 rows selected.
SQL> Truncate Table Sales;
Table truncated.
SQL> Truncate Table Accounts;
Table truncated.
SQL> Truncate Table Research;
Table truncated.
SQL> Insert First
2 When Deptno=10 Then
3 Into Sales (Empno,Ename,Job,Mgr,Hiredate,Sal,Comm,DeptNo)
4 When Deptno=20 Then
5 Into Accounts (Empno,Ename,Job,Mgr,Hiredate,Sal,Comm,DeptNo)
6 When Deptno=30 Then
7 Into Research (Empno,Ename,Job,Mgr,Hiredate,Sal,Comm,DeptNo)
8 Select * From Emp
9 /
16 rows created.
SQL> Select * From Sales;
    EMPNO ENAME      JOB             MGR HIREDATE        SAL      COMM    DEPTNO
     7782 CLARK      MANAGER        7839 09-JUN-81       100                  10
     7839 KING       PRESIDENT           17-NOV-81       100                  10
     7934 MILLER     CLERK          7782 23-JAN-82       100                  10
     7999 ABCDEFGH   JOB            7839 09-FEB-06       100         0        10
4 rows selected.
SQL> Select * From Accounts;
    EMPNO ENAME      JOB             MGR HIREDATE        SAL      COMM    DEPTNO
     7901 SMITH      CLERK          7902 17-DEC-80       100                  20
     7566 JONES      MANAGER        7839 02-APR-81       100                  20
     7788 SCOTT      ANALYST        7566 19-APR-87       100                  20
     7876 ADAMS      CLERK          7788 23-MAY-87       100                  20
     7902 FORD       ANALYST        7566 03-DEC-81       100                  20
      123                                                                     20
6 rows selected.
SQL> Select * From Research;
    EMPNO ENAME      JOB             MGR HIREDATE        SAL      COMM    DEPTNO
     7499 ALLEN      SALESMAN       7698 20-FEB-81       100       300        30
     7521 WARD       SALESMAN       7698 22-FEB-81       100       500        30
     7654 MARTIN     SALESMAN       7698 28-SEP-81       100      1400        30
     7698 BLAKE      MANAGER        7839 01-MAY-81       100                  30
     7844 TURNER     SALESMAN       7698 08-SEP-81       100         0        30
     7900 JAMES      MANAGER        7698 03-DEC-81       100                  30
6 rows selected.Both inserting insert the same records then whats the difference between ALL and FIRST clause in multi insert DML
Khurram Siddiqui
[email protected]

Hello
From the docs:
ALL
If you specify ALL, then Oracle evaluates each WHEN clause regardless of the results of the evaluation of any other WHEN clause. For each WHEN clause whose condition evaluates to true, Oracle executes the corresponding INTO clause list.
FIRST
If you specify FIRST, then Oracle evaluates each WHEN clause in the order in which it appears in the statement. For the first WHEN clause that evaluates to true, Oracle executes the corresponding INTO clause and skips subsequent WHEN clauses for the given row.
ELSE clause
For a given row, if no WHEN clause evaluates to true:
* If you have specified an ELSE clause, then Oracle executes the INTO clause list associated with the ELSE clause.
* If you did not specify an else clause, then Oracle takes no action for that row.
See Also:
"Multitable Inserts: Examples"
Restrictions on Multitable Inserts
* You can perform multitable inserts only on tables, not on views or materialized views.
* You cannot perform a multitable insert into a remote table.
* You cannot specify a table collection expression when performing a multitable insert.
* In a multitable insert, all of the insert_into_clauses cannot combine to specify more than 999 target columns.
* Multitable inserts are not parallelized in a Real Application Clusters environment, or if any target table is index organized, or if any target table has a bitmap index defined on it.
* Plan stability is not supported for multitable insert statements.
* The subquery of the multitable insert statement cannot use a sequence.
So given this the following example shows the difference:
SQL> CREATE TABLE dt_test_insert_base as select rownum id from dba_objects where rownum <=20
2 /
Table created.
SQL> CREATE TABLE dt_test_insert_1 (id number)
2 /
Table created.
SQL> CREATE TABLE dt_test_insert_2 (id number)
2 /
Table created.
SQL>
SQL> INSERT ALL
2     WHEN rownum <=15 THEN
3             INTO dt_test_insert_1 (id)
4     WHEN rownum >=10 THEN
5             INTO dt_test_insert_2 (id)
6 SELECT
7     ID
8 FROM
9     dt_test_insert_base
10 /
26 rows created.
SQL>
SQL> SELECT * from dt_test_insert_1
2 /
        ID
         1
         2
         3
         4
         5
         6
         7
         8
         9
        10
        11
        12
        13
        14
        15
15 rows selected.
SQL> SELECT * from dt_test_insert_2
2 /
        ID
        10
        11
        12
        13
        14
        15
        16
        17
        18
        19
        20
11 rows selected.
SQL>
SQL> TRUNCATE TABLE dt_test_insert_1
2 /
Table truncated.
SQL> TRUNCATE TABLE dt_test_insert_2
2 /
Table truncated.
SQL>
SQL> INSERT FIRST
2     WHEN rownum <=15 THEN
3             INTO dt_test_insert_1 (id)
4     WHEN rownum >=10 THEN --This condition is ignored until the value of id is > 15
5             INTO dt_test_insert_2 (id)
6 SELECT
7     ID
8 FROM
9     dt_test_insert_base
10 /
20 rows created.
SQL> SELECT * from dt_test_insert_1
2 /
        ID
         1
         2
         3
         4
         5
         6
         7
         8
         9
        10
        11
        12
        13
        14
        15
15 rows selected.
SQL> SELECT * from dt_test_insert_2
2 /
        ID
        16
        17
        18
        19
        20HTH
David

Difference between CAF and GP?

Dear All,
Can any one explain me what is the difference between CAF and GP? what is the difference between the CAF application and webdynpro application? In which senario we will go for CAF development and in which senarion we will go for GP application. Can we deploy the CAF/GP application in Enterprise Portal?
Thanks in advance
With Regards,
Balachander

Composite Application Framework consist of two parts
1. CAF Core
2. CAF GP (Guided Procedure).
CAF core is used to model the the services. Composite Application Framework (CAF Core) service-oriented architecture and the standardized object access allow for uniform treatment of business processes as servicesand business objects independent of the underlying system. CAF Core integrates the elements of all the SAP NetWeaver integration layers to facilitate the creation of new business solutions across people, information, processes and application object repositories. Composite Application Framework Core (CAF Core) is an environment for building andrunning packaged composite applications (PCAs) such as SAP Collaborative Cross Applications (xApps).CAF Core supports the development of new business solutions across people, information, and processes by unifying elements from all layers of the SAP NetWeaver technology platform.
CAF Core is a comprehensive environment, which includes programming abstractions, a
programming model, metadata, and tools to support the development and deployment of
composite applications based on Enterprise Services Architecture (ESA). This environment
allows developers to build applications, which leverage the whole SAP NetWeaver stack
without the need to feed low-level APIs. This way, they can focus on implementing the
business logic of a composite application. SAP CAF comes with predefined generic patterns
for reuse in different development projects.
CAF Core consists of the following main elements:
Composite Application Services perspective, which includes a tool for modeling entity,
application, and external services
Configurable user interface components
CAF Core administrative tool
CAF Core and SAP Business Information Warehouse (SAP BW) integration.
CAF GP (Guided Procedure) : CAF GP is used for process or orcastration. Anything you want to integrate with GP you will firat go through Callable Object. For Each Callable Object has one Action. So callable Object and Action are mapped with 1:1. On the top of Actions you need to create Block and on the top of Block you will Create Process.
Difference between the CAF application and webdynpro application: CAF application CAF Core) is used for modeling services. The services may be local in respect of CAF or remote (like RFC, BAPI, Web Service). But Web Dynpro application is used to develop the UI (User Interface). You can Line your CAF application with Web Dynpro Applicationa and ultimatelly you can expose the web dynpro application as a Callable Object which will be integrategrated with Guiged Procedure. Another ways for developing your UI using VC(Visual Composer), CAF UI Pattern.
If you need more details let me know.
Thanks and Regards
Chandan

Difference Between SOAP And HTTP Adapters

Hi,
Any body give me some information Abt Differences between SOAP And HTTP Adapters i know both are in use of Webservises. Any one come with more specific differences like in what case we go for SOAP And in what case we go for HTTP. thanks in advance.
Thanks
kiran.B

Hi,
In addition to the above
The SOAP Adapter enables u to exchange SOAP messages between the remote clients or web servers and the integration server
The HTTP Adapter is used to receive the arbitrary XML in the body of an HTTP-Post request.The HTTP adapter uses HTTP version 1.0 and does not support returning fault messages to the sender.
The HTTP adapter is used by the external systems to connect to the integration engine using the native HTTP interface.The plain HTTP adapter is a part of integration engine.
Regards,
Gunasree.

Difference between relay and remote?

Similar Messages

Maybe you are looking for