Difference between Release call, End and Termination node in ICM

Hi all,
Can anyone let me know the clear difference between Release call, End and Termination node in ICM and in which situations we should use these nodes.
Thanks.
Regards
Deepak

Check this, hope will be helpful.
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/ipcc_enterprise/ipccenterprise7_0/user/guide/ipce70sg.pdf
Sent from Cisco Technical Support iPhone App

Similar Messages

Difference between release for Transport and Export

Hi,
can anybody tell me the difference between the release for Transport of a change list and the Export Design Object ? When a change list is released is it not possible to select File System as mode or CMS ?
Thx.

These relate to how your transport system is configured.
If you use FTP you cannot release for transport, and if you have CMS, I don;t beleive you can FTP.
Release Transfer
Transfer design objects within an Integration Repository from one software component version to another.
http://help.sap.com/saphelp_nw04/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm

Questions about the difference between RFC calls with and without JavaProxy

Hello,
I have a two questions:
1. Why is it more user-friendly to access SAP data in conjunction to plain JCo calls as explained here http://help.sap.com/saphelp_nw04/helpdata/en/79/c6213e225f9a0be10000000a114084/content.htm? Waht's exactly the reason for?
2. What's exactly the runtime shown in the picture here http://help.sap.com/saphelp_nw2004s/helpdata/en/ed/897483ea5011d6b2e800508b6b8a93/frameset.htm?
Regards,
Armin

Moin Armin,
from what I understand from the first link, SAP is probably trying to say that it is user friendly because not everyone needs to be concerned regarding the actual JCo calls to the SAP backend. Rather they can simply work with the generated proxies as if they were actually working with the SAP Tables. The mapping, JCo calls and data transfer is taken care of by the Enterprise Connector.
For instance, you can generate proxies of the BAPIs on your side and let 10 users work with the structures and tables and when it is deployed, the JCo calls are automatically taken care of (from the SLD).
The figure in the second link just shows the runtime to illustrate that the native calls are hidden (again probably the same point I made before).
I am not sure, just my interpretation
Bye,
Sameer

What's the difference between AIA 3.0 and AIA FP 11g Release 1 (11.1.1.4.0)

Hi, experts,
Have a question need your great help and clarification, you know we have Oracle AIA Foundation Pack 2.5 based on SOA 10.1.3.4 installation, the new release for SOA has been released on this version Oracle Fusion Middleware 11g R1 (11.1.1.4.x) Released the other day, within this version, we have a Foundation Pack 11g Release 1 (11.1.1.4.0) based on SOA11g.
My questions are as below
1) What's difference between AIA 3.0 and Foundation Pack 11g Release 1 (11.1.1.4.0)?
2) We know, on the top of AIA 2.5, we have Foundation Pack 11g Release 1 (11.1.1.2.0) and Foundation Pack 11g Release 1 (11.1.1.4.0), doesn't mean that the Foundation Pack 11g Release 1 (11.1.1.4.0) has another nickname that is AIA3.0?
3) Does anyone provide AIA 3.0 installation and implementation guide?
Appreciated if you could provide some suggestions or comments based on above question, thanks in advance!

Please see the answers below...
#1 . AIA 3.0 is internal project name, AIA 11g R1 is an official release which is 11.1.1.2.0, then after two patch sets released they are 11.1.1.3.0 and 11.1.1.4.0
#2 hope the above answered your question.
#3 AIA 11g R1 x install and developer guides available on OTN.
Regards,
Narayana

Difference between oracle application 11i and release 12

can some one give me a doccument..link..or anything related to difference between oracle application 11i and release 12 with all details technical and strucutural

Please check the following links:
Note: 404152.1 - E-Business Suite Release 12: Release Content Documents
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=404152.1
what is the difference between REL 10.5.10 and REL 12
Re: what is the difference between REL 10.5.10 and REL 12

Difference between Project call off order and Service order

Hi,can anyone please explain to me the
Difference between Project call off order and Service order
Thanks,
SS

Hi SS.
Please post your query to Project System (PS forum for getting quicker answers.
/community [original link is broken]
Yuo may please close this thread.
Regards
Datta

Difference between on change of and at end of :

Hi Can any one explain me what is the exact difference between on change of and at end of .
I know the basic differences.
But i would like to know in which case we can use the above two statemetns.
Suppose :
Matnr   plant       sloc       movementype      date                          qty
12       001          002           261                12/11/08                    10
12      001          002            261               12/11/08                      11
12      002          003            261               12/11/08                      12
Here i need to add the quantity based up on the material,
If the materials is maintained in different plants then it should give the total for for that particular plant.
Please help me how to build logic to this :
Regards,
Vinay.

ok sure i will give it to u.
MATNR       PLANT          SLOC            BWART           BUDAT         QTY1           QTY2           QTY3             QTY4            QTY5
127874     2501     3025     200906     201     0.000     0.000     0.000     0.000     0.000
                     QTY6           QTY7             QTY8             QTY9           QTY10         QTY11            QTY12
     0.000     0.000     0.000     0.000     0.000     0.364     0.000
127874     2501     3025     200905     201     0.000     0.000     0.000     0.000     0.000     0.000     0.000     0.000     0.000     7.000     0.000     0.000
127874     2501     3025     200905     202     0.000     0.000     0.000     0.000     0.000     0.000     0.000     0.000     0.000     1.000     0.000     0.000
127874     2501     3025     200905     261     0.000     0.000     0.000     0.000     0.000     0.000     0.000     0.000     0.000     35.000     0.000     0.000
127874     2501     3025     200905     551     0.000     0.000     0.000     0.000     0.000     0.000     0.000     0.000     0.000     5.000     0.000     0.000
Here i need to write the logic for that material usage :
This material usage will be caliculated based upon the movement types in that particular month :
The formula is :
AT END OF BUDAT.
     FINAL_VALUE_WA-KWMENG12 =   ( W_QTY261 -   W_QTY262 ) + ( W_QTY201 - W_QTY202 ) + ( W_QTY551 - W_QTY552 ).
      CLEAR : W_QTY261,W_QTY262,W_QTY201,W_QTY202,W_QTY551,W_QTY552.
    ENDAT.
Here iam writting the logic as at end of the month iam caliculating.
But what my question is if we have same material in different plant and the usage is in the same month
then i think this query is going to fail.
Edited by: vinay raj on Jul 6, 2009 2:02 PM
Edited by: vinay raj on Jul 6, 2009 2:03 PM

Difference between a starting date and time and ending date and time

Hi All,
I need to bring out the difference between a starting data and time and ending date and time. Difference should be in time I mean it should be in hours or minus or seconds.
I am sure there must be a Function module for this, Has anyone of you been in search of this kind of FM, Kindly suggest me. It is urgent.
Thanks
Mahen

Hi,
Check this out.
data : date1 type dats ,   " System data type for Date (sy-datum)
       date2 type dats,
       time1 type tims,      " System data type for time (sy-timlo)
       time2 type tims,
       days type i,
       scd   type i,
       t_mt type i.
days = date1 - date2. " Diference in days.
Scd = time1 - time2. " diference in seconds.
t_mt = ( days * 24 * 60 ) + ( scd / 60 ).
total diference in minute
<b>Reward Points & Mark Helpful Answers</b>

Difference between Release DP to SNP and Release profile

Hi Experts,
What is the difference between Release DP to SNP
And maintain Release profile. Can u suggest am lot of confusion about these?
Explain in brief.
prasad

Hi Prasad,
Aparna point is absolutely correct. From usage point of view, date is the only difference.
There are 2 options to release forecast from DP to SNP.
1. Demand Planning -> Planning -> Release -> Release to Supply Network Planning.
2. By creating Rlease profile, activity , planning job, etc
1 is used for online purpose & for few product/location combinations. However 2 is used for the mass processing.
Use 1 to release a limited amount of data (a few product / location combinations only) from Demand Planning to Supply Network Planning. Do not use it for mass releases, for example large planning books.
If you try to release too much data with this transaction, memory problems are likely, since the system tries to read all the data
simultaneously. For mass processing, use 2 - Releasing the Demand Plan with Mass Processing.
Decision is based on data volume & performance.
Hope this helps.
Regards,
Nawanit

Difference between release 7.0.235.3 and 7.3.101.0

Hello Community
We have bought an 2504 Wirless Controller and now i want to download the newest Software, actually the Wireless Controller runs release 7.2.103. In the download section from cisco i've found two "latest versions" the 7.0 with release date from 11.09.2012 and the other 7.3 with the release date 30.08.2012. Now i'm a bit confused about this, because the higher release has an lower release date :S
Can you tell me the difference between this versions? and which version i should install?
Thank you very much for your response!
Best regards
Kevin

No.. the older WLC's 2106, 4400's and WiSM's can only support up to 7.1.x. The 2504, 5508, 7500, 8500, WiSM2 can support all the new codes from 7.2 to 7.3 an newer.
You can put 7.0.x, 7.2.x and or 7.3.x on the 2504. It depends on what features you want and the ap that is supported of the various versions. All this info is in the release notes.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

Is there any actual difference between Release, Debug and Debug Local configurations in SSRS project?

Is there any actual difference between Release, Debug and Debug Local configurations in SSRS project?
For example in VC++ Debug build would have all optimization turned off (by default) and included additional Debug information in executable.
Since there is no executable produced for SSRS - is there any actual difference between configurations? Or are they only for the purpose of deploying to different destination servers?

Hi JoeSchmoe115,
The Project Configuration and Configuration Manager is a feature supported by Visual Studio, on which Business Intelligence Development Studio or SQL Server Data Tools is based. We can use Configuration Manager to create and manage sets of project properties
in project configurations. You are right that the project configurations is only for deployment purpose in a Report Server project.
Reference:
http://technet.microsoft.com/en-us/library/ms155802.aspx
Regards,
Mike Yin
TechNet Community Support

Differences between BW 2.1 and BI 7.0 - End User Perspective

Hi all,
Please provide me info on what are the differences between BW 2.1 and BI 7.0 on an End User point of view.
We are doing an Upgrade Project from 2.1 to 7.0. Any info provided will be highly appeciated.
Regards,
Deepa.
Edited by: Deepa Jose on Jun 2, 2008 11:37 AM

Hi,
Take a look at the links below.
Differences between BW 3.5 and BW 7
diff between BIW 3.5 and BI 7.0
what is the difference b/w BI 3.5 and BI 7.0?
/people/mallikarjuna.reddy7/blog/2007/02/06/remodeling-in-nw-bi-2004s
https://websmp105.sap-ag.de/~sapidb/011000358700004406372006D
Regards.

What is the difference between Wine, Wineskin, Winery and Wine Bottler, and how do I get Wine to *ACTUALLY* work in Mountain Lion?

Ok, so this is my first post here and I am admittedly terrible at forums. Someone might say, "This was addressed in the ___________ thread by __________! Go read it!" --- that may be so but I've spent enough hours trying to google this problem into submission to no avail based on what is apparently working for others, so I would like a chance to get specific answers to specific questions that aren't from Mar 2011, etc.
So first of all, I'm confused by all the various Wine programs/apps/whatevers. I've seen Wine, Wineskin, Winery, Wine Bottler, and at this point I wouldn't be surprised if there are even more than that. What's the difference between all of these and how do they work with one another? What do I actually need to get windows programs working?
All of my google searches have led me to people giving out fish, but no one giving out fishing lessons. I'm not a pro at mac and windows and all that, but I'm a fairly bright individual who gets VERY frustrated, very quickly, when I don't understand the why and how of something I'm attempting.
I've also found "answers" where the person attempting to help starts off helpful enough, but degrades into the most archaic of techno-babble after about 5-6 sentences. On the other hand, I've watched tutorials on youtube where the poster decides to skip (apparently crucial) sections of the tutorial, and mutters such gems as: "... you might wanna have to run Wine first before you can do anything, cuz I think it has to configure it and set up a bunch of stuff"
O.o
A happy medium between techno-babble and the most basic of explanations would be ideal for me, and I'd imagine for others as well.
Here is a summarized history of my relationship with Wine:
Diablo II - I downloaded this awesome thing which ended up being... uh... I guess Diablo II in a Wineskin "wrapper". I'm not sure, all I know is that it's a D2 icon, and if I go to 'show package contents', it's got C drive, Program Files, et cetera inside of it. I double click it, it launches D2, and it works like a dream. <3
'Vanilla Install' - That's what I heard someone call it. It was the command/terminal style install using xquartz and xcode found at http://www.davidbaumgold.com/tutorials/wine-mac/. I followed every instruction to the letter, and got all the way to '$ sudo port install wine', at which point it started going smoothly, free from the possible error he described regarding the installation of xcode, and then just failed after I left the room to use the restroom and came back. Please don't ask me to repeat what the error was, because honestly, after reading more things on the interwebs, I'm confused as to why it's even necessary to go through all of that, so I'd rather not try that route again anyways, rendering the error message quite possibly irrelevant.
Wine + Wine Bottler - So I decided to try to seek out an easier method, as I know that one must exist that doesn't involve command lines. I found a video tutorial at http://www.youtube.com/watch?v=m0BBkISOcEA, and oh man would it be great if that method had actually worked. Again, I followed all instructions provided to procure my free fish, and at the point in the video where he declares that "xquarts or x11 will open" - it doesn't open. Nothing opens. I was trying to install Star Sonata, btw.
So here I am, thoroughly worn out, frustrated at all the random places Wine is installed on my mac now, and just want someone to explain it all, from top down, without getting toooooooo technical on me. I know that might be asking a lot...

## I know that the poster has already found a solution, but the following is a possible answer for others that have similar issues.
For Winebottler, just go to their website and download it. Run the program. Choose .wine as your prefix (best choice) or whatever suits you best. You'll need a functional X11. If you can't use the one that comes with your mac, download the latest one from the website.
If your issue is one with Winebottler's Wine not running correctly due to X11, then you have a pretty ugly problem, although a simple upgrade is the best solution (Upgrade XQuartz.app).
http://www.davidbaumgold.com/tutorials/wine-mac/#part-1
The above website is the easiest way to get REAL wine on your computer. First of all, Wineskin WInery, etc. are NOT WINE. They are 3rd party apps that may use Wine or may have originally part of Wine, but they are no longer up to date with Wine. WineBottler is currently up to date with the stable releases of Wine (but not the maintenence releases).
For the website tutorial and to run Wine on your mac without using a thrid party app, you will need to know a few things.
First, you will need to know basic control of the command line. That means, sudo (you must know the administrator password to your computer), and the forms of cd (change directory).
Second, you will need Xcode. Download 4.2 (stable) or whatever other versions you want, but beware: It is over 1 GB, and you will need time for it to work.
Third, you will need to get MacPorts and configure it. The tutorial should have this data.
When you download wine (use sudo port install wine-devel for the latest development release of wine), it will first download a lot of dependencies. This will take a while. After that, it will download wine itself.
After obtaining wine, to run a program, open the terminal.app window.
cd desktop/XYZ/ZYZ\ WRQ
The above will first enter the desktop, then folder XYZ, then folder ZYZ WRQ. From here,
wine th11e.exe
Or whatever executable you are trying to open. (Using Subterranean Animism as my example).
It should, in theory, run the program. Watch the terminal for errors. If there is an X11 problem, then it's not wine acting up. If the app crashes or has other issues, check the Wine Application Database to see if your app is compatible with wine.
If you have any further questions or other things, feel free to reply; I may or may not get back to you, but there's a good chance that someone will come in eventually. Otherwise, the Wine Wiki should have some information.

Difference between ECC 6.0 and earlier versions

Hi,
one of the difference between ECC 6.0 and earlier versions is that instead 'WS_UPLOAD' and 'WS_DOWNLOAD' in ECC we should use 'GUI_UPLOAD' and 'GUI_DOWNLOAD' respectively.
(of course SPDD and SPRO tcodes is known by everone i suppose)
Similarly can u all put down some differences here, atleast one entry by each, I think we can make a good docu. I have searched the net for the differences but could not get much, so by each of us contributing one each, it would become good docu..for all of us.
Thanx in advance

Unicode Errors Encountered and their Solutions
E1. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified.
     Error:
     OPEN DATASET FILE FOR OUTPUT IN TEXT MODE.
     Solution:
     OPEN DATASET FILE FOR OUTPUT IN LEGACY TEXT MODE.
E2. In Unicode, DESCRIBE DISTANCE can only be used with the IN BYTE MODE or IN
      CHARACTER MODE addition.
     Error:
     DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIEBO01 INTO BPOS.
     Solution:
DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIENR01 INTO BPOS
IN CHARACTER MODE.
E3. u201CUSR02-UFLAGu201D must be a byte-type field (Typ X or XSTRING )
     Error:
     IF USR02-UFLAG O YULOCK.
     Solution: Since the data type of USR02-UFLAG is type INT and is compared with data type
                X u2013 Hence the error. So we define a new variable ZULOCK and assign the
                value of USR02-UFLAG to ZULOCK.
              New variable
              DATA: ZULOCK(1) TYPE X.   "APBRP00
              Assign value
                            ZULOCK = USR02-UFLAG.
        Compare -
               IF ZULOCK = YULOCK.   u201Creplace IF USR02-UFLAG O YULOCK.
E4. HT cannot be converted to a Character type field
Error :
WRITE ht TO t_data+10(2).
Solution : Since the data type of ht is a type u2018Xu2019 and the data is been transfer to
         t_data which has a data type u2018Cu2019. value of one data type cannot be copy to
         another data type where one of them is type string .Hence the error occur,
         so the data type of ht is been change to Type u2018Cu2019
     OR
           A Tab ( value 09 ) is introduced as part of the row. The value 09 is not converted in Unicode environment. Instead we need to use class
     Error:
          DATA: BEGIN OF ht,
               x(1) TYPE x VALUE '09',
          END OF ht.
     Solution:
              Define Class after the Tables definition.
                   CLASS cl_abap_char_utilities DEFINITION LOAD.
              Data Defination : Comment internal table HT and define a variable HT type C.
       *   Insert + APRIA00 05/02/2007 Unicode project
       *   DATA: BEGIN OF ht,
     *         x(1) TYPE x VALUE '09'
       *   END OF ht.
     *   Insert - APRIA00 05/02/2007 Unicode project
       DATA HT type C.
       Before using HT assign Horizontal tab.
                 Ht = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E5. In Unicode programs the u201C#u201D cannot appear in names, as it is does here in the name    u201C#LINESu201D
     Error :
     #LINES                 TYPE I,
     Solution : Since the # is used in the start of name, it is not allowed. We need to
              remove it.
     Solution for the above
     V_LINES                 TYPE I,
E6. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified as well as the addition was required FOR OUTPUT,FOR INPUT, FOR APPENDING OR FOR UPDATE was expected.
     Error:
     OPEN DATASET PATH_NAME IN TEXT MODE.
     Solution:
     Download =     OPEN DATASET PATH_NAME FOR OUTPUT IN LEGACY TEXT MODE.
     Upload        = OPEN DATASET AUSZUG-FILE IN TEXT MODE FOR INPUT ENCODING DEFAULT.
E7. u201CTABu201D must be a character-type data object( data type C,N, D, T or String). Field string)
     Error:
            data: begin of tab,                   "Excel Parameter Split at TAB
        t type x value '09',          "Tabulator
       end of tab.
            concatenate 'Material' 'Package Status'
                into z_download-line separated by tab.
            ( In the above command the two field are to be separated with a horizontal Tab. The earlier      way of assigning the tab value u201809u2019 will not work in Unicode environment.
     Solution:
     Define a class just after the Table defination.
          CLASS cl_abap_char_utilities DEFINITION LOAD.
            Define variable Tab as shown below :
          Data : TAB           TYPE C.
     Before the concatenate statement assign the value of Tab using pre-defined attributes.
          TAB = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E8. Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not Unicode-
      enabled; use the class cl_gui_frontend_services
     Error-1: Function WS_DOWNLOAD is obsolete in Unicode environment.
            call function 'WS_DOWNLOAD'
                 exporting
                      filename = zfilename
                 tables
                      data_tab = z_download.
     Solutions-1: Instead of WS_DOWNLOAD use GUI_DOWNLOAD.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
*   BIN_FILESIZE                  =
    FILENAME                      = zfilename
TABLES
    DATA_TAB                      = z_download.
E9. The "/" character is reserved for identification of namespaces. It must be entered twice.
        The name of a namespace must be at least 3 characters long.
     Error :
                 U/N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
     Solution :
     * Special character can not be used to define a data variable
     *      U/N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
              U_N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
     * Insert - APSUS02 07/02/2007 Unicode Project
E10. "LP_TAB" and "CS_TAB" are not mutually convertible. In Unicode programs,
         "LP_TAB" must have the same structure layout as "CS_TAB", independent of the length
         of a Unicode character.
     Error : This error is encountered when data from one internal table is copied to another
                         internal table which different structure. In this case its LP_TAB & CS_TAB.
                 LP_TAB[] = CS_TAB[].
     Solution :
          * Replace + APSUS02 07/02/2007 Unicode Project
*   LP_TAB[] = CS_TAB[].
              move-corresponding CS_TAB to LP_TAB.
          * Replace + APSUS02 07/02/2007 Unicode Project
E11. Could not specify the access range automatically. This means that you need a RANGE
          addition.
     Error : Range need to be specified as an addition to the command.
            DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1).
           Solution :
            DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1)
          * Insert + APSUS02 07/02/2007 Unicode Project.
                                                      RANGE ABCD+0(4).
* Insert - APSUS02 07/02/2007 Unicode Project.
E12 . Processing Terminated Error code: Error in opening /
                                          Path not found when downloading to Unix directory.
     Error : PARAMETER: outfile(92) DEFAULT
              '/CP/interface/NPP/data/MX/cbslaprcpts'
                    LOWER CASE,
               kmxmstrd AS CHECKBOX.
            This error is encountered when the path is missing. The above path is related to CCP.
     Solution: For testing purpose comment the original path and replace it with
                                 /CP/interface/CCD/Unicode_test/
E13.    Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not                                                                       Unicode- enabled; use the class cl_gui_frontend_services
     Error: Function WS_UPLOAD is obsolete in Unicode environment. (During UCCHECK)
               Call function 'WS_UPLOAD'
       Exporting
            Filename                = zfilename
            Filetype                = u2018DATu2019
       Tables
            data_tab                = z_upload
       Exceptions
            Conversion_error        = 1
            file_open_error         = 2
            file_read_error         = 3
            invalid_table_width     = 4
            invalid_type            = 5
            no_batch                = 6
            unknown_error           = 7
            gui_refuse_filetransfer = 8
            others                  = 9.
     Solution: Instead of WS_UPLOAD use TEXT_CONVERT_XLS_TO_SAP. Do not use temporary file put the file name as it is.
1) First define a type pool and a variable of type truxs_t_text_data.
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
     2) Use this it_raw in the function module in parameter i_tab_raw_data. Put file name and the internal table in the function module.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
*     I_FIELD_SEPERATOR        =
*      i_line_header            = ' '
      i_tab_raw_data           = it_raw       " WORK TABLE
      i_filename               = zfilename
    TABLES
      i_tab_converted_data     = z_upload[]    "ACTUAL DATA
   EXCEPTIONS
      conversion_failed        = 1
      OTHERS                   = 2.
     Comment u201Ci_line headeru201D. It takes the first/ header line of the file which is to be uploaded.
Put square brackets after internal table as shown above.
E14.    CURSORHOLD may not be converted into a number.
     Error: GET CURSOR LINE CURSORHOLD VALUE CURSOR_HOLD.
     Solution: In the declaration part of CURSORHOLD, one field is of u2018Pu2019 type and one field is of u2018Iu2019 type, which is not allowed in Unicode environment.So change the the type of it to NUMC.

Differences between XI 3.0 and 7.0?

Can anyone say the difference between SAP XI 3.0 and SAP XI 7.0? Also I would like to know when 7.0 is released in the market?

Hi,
that's the answer I received from OSS support regarding availability of XI 7.0 (status end of last year):
<i>the actual Release is XI 3.0 which is part of NetWeaver '04 as you
probably now.
XI 4.0 to XI 6.0 will be left out to synchronize the Release numbers of
NetWeaver components.
That means that the release which followes XI 3.0 is called XI 7.0 (and
not XI 4.0).
For XI point of view there is not much difference between XI 3.0 and XI
7.0
Regarding your question:
unfortunately we plan to give out the next major release just about end
of next year (2006).</i>
regards,
Peter

Difference between Release call, End and Termination node in ICM

Similar Messages

Maybe you are looking for