Difference between Release DP to SNP and Release profile

Hi Experts,
What is the difference between Release DP to SNP
And maintain Release profile. Can u suggest am lot of confusion about these?
Explain in brief.
prasad

Hi Prasad,
Aparna point is absolutely correct. From usage point of view, date is the only difference.
There are 2 options to release forecast from DP to SNP.
1. Demand Planning -> Planning -> Release -> Release to Supply Network Planning.
2. By creating Rlease profile, activity , planning job, etc
1 is used for online purpose & for few product/location combinations. However 2 is used for the mass processing.
Use 1 to release a limited amount of data (a few product / location combinations only) from Demand Planning to Supply Network Planning. Do not use it for mass releases, for example large planning books.
If you try to release too much data with this transaction, memory problems are likely, since the system tries to read all the data
simultaneously. For mass processing, use 2 - Releasing the Demand Plan with Mass Processing.
Decision is based on data volume & performance.
Hope this helps.
Regards,
Nawanit

Similar Messages

What is the difference between a Prod Ord (Created) and Prod Ord (Released)

Hi
Please can someone advise the significant differences between a Prod Ord (Created) and
Prod Ord (Released)
And what are the effects/relations of each of them to Dependant demand in APO SNP for a products BOM components.
I currently have a product where the Ord Res for the BOM component only appears against Dependant demand key figure in APO SNP when the Prod Ord is Released
Thanx
Keegan

In addition to what Senthil has mentioned
The ATP Category on the order element at
Header product                                            Component product Requirement Element
Production Order (Created)                           Dependent Demand (AY)
Production Order (Released)                         Order Reservation (AU or AV)
Check the category group assignment for Dependent Demand keyfigure in your SNP Planning Area.
The Dependent Demand keyfigure 9ADMDSE for 9AMALO aggregate will have Category Group assignment DS1 as standard. DS1 has AU, AV, AY and EL Categories details of which are below
ATP Cat                                     Catergory Description               Category Type
AU     OrdRes     Order reservation not withdrawable     Requirements
AV     OrdRes (W)     Order reservation withdrawable     Requirements
AW     OrdRes     Order reservation not withdrawable     Receipts
AX     OrdRes (W)     Order reservation withdrawable     Receipts
AY     DepDmd     Dependent demand                                     Requirements
AZ     DepDmd     Dependent demand                                     Receipts
So if you have some other Category Group assignment which does not have AY in it. So unless the Production Order is Released you do not see the component requirement in Dependent Demand keyfigure in Interactive SNP.
Hope this helps.
somnath

Difference between Release call, End and Termination node in ICM

Hi all,
Can anyone let me know the clear difference between Release call, End and Termination node in ICM and in which situations we should use these nodes.
Thanks.
Regards
Deepak

Check this, hope will be helpful.
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/ipcc_enterprise/ipccenterprise7_0/user/guide/ipce70sg.pdf
Sent from Cisco Technical Support iPhone App

Is there any actual difference between Release, Debug and Debug Local configurations in SSRS project?

Is there any actual difference between Release, Debug and Debug Local configurations in SSRS project?
For example in VC++ Debug build would have all optimization turned off (by default) and included additional Debug information in executable.
Since there is no executable produced for SSRS - is there any actual difference between configurations? Or are they only for the purpose of deploying to different destination servers?

Hi JoeSchmoe115,
The Project Configuration and Configuration Manager is a feature supported by Visual Studio, on which Business Intelligence Development Studio or SQL Server Data Tools is based. We can use Configuration Manager to create and manage sets of project properties
in project configurations. You are right that the project configurations is only for deployment purpose in a Report Server project.
Reference:
http://technet.microsoft.com/en-us/library/ms155802.aspx
Regards,
Mike Yin
TechNet Community Support

What is the difference between 11.1.0.1 And 11.1.0.1.1

What is the difference between 11.1.0.1 And 11.1.0.1.1

11.1.0.1 is the base version of Oracle installed on the system.
11.1.0.1.1 is the version of PSU (patch set update) applied to the base release version.
Take a look at this http://docs.oracle.com/cd/B28359_01/server.111/b28310/dba004.htm

Difference between Oracle developer suite 9i and 6i

Hi -
Can I know what's the release difference between oracle developer suite 9i and 6i , and what's new in oracle discoverer 9i in compare with last version , we have discoverer version of 4.1...
I could not able to get from metalink anything like new features in 9i deve;oper suite.
Existing oracle financial application 11.5.8 have their forms and reports in 6i version.
What impact will have if changed with new version of application 11.5.10 in future .

Oracle Developer Suite 9i is now called Oracle 9iDS. Oracle also sells Oracle 9iAS. You need to license iAS in order to run application created using iDS.
9i is fully J2EE compliant. It offers improved integration between components. Its much more feature rich than 6i. See:
http://www.oracle.com/ip/develop/ids/
for more information.
what's new in oracle discoverer 9i in compare with last versionThis question is best asked in Discoverer Forum.
What impact will have if changed with new version of application 11.5.10 in future Reports offers backward compatibility between 6i and 9i reports with a few exceptions. See Oracle Reports Obsolescence plan on OTN:
http://otn.oracle.com/products/reports/htdocs/getstart/whitepapers/movingto9i.pdf
Regards
Sripathy

What is the difference between version 4.7 EE and ECC 6.0 in SD module.

Hi SAP Gurus,
what are the features in 4.7 EE version in general.
what are the features in ECC 6.0 version in general.
then give me the exact difference between version 4.7 EE and ECC 6.0 in SD module.
if u give the information, then u will get the rewards.
Regards,
somu.

Hi Somu,
These are additional enhancements avialble in ECC6.0 other than that remaining same as 4.7E
1.E-Commerce:- SAP ERP provides powerful e-commerce capabilities that can be expanded in an easy, cost-effective manner in line with business growth. Organizations can run a complete sales process on the Internet, and provide business-to-business (B2B) and business-to-consumer (B2C) customers with personalized and interactive online self-services.
2.Mobile Sales for Handhelds:-SAP ERP enables sales professionals to access front- and back-office business processes and to manage critical sales activities in the field using standard PDAs or other handheld devices (including those with bar code scanners). In this area, SAP ERP provides the following functions:- Customer managementWith SAP ERP, sales professionals may enter, view, and modify detailed customer information, and view sales order history for each customer.- Sales order managementSAP ERP enables sales staff to take sales orders via bar code scanners; search, create, and modify sales orders; and list or sort sales order partners.- Material managementSupport for material management for mobile sales enables staff to view material lists or details for a specific material, search material, and display customer-specific prices.
3.Resource-Related Down Payments and Billing:-- Supports creation of down-payment requests analogous to the functions offered by resource-related billing- Enables organizations to bill the requesting company code for services provided via a resource-related billing document.
4.SAP Beverage Functions Available for the Consumer Products Industry:- As of SAP ERP Central Component (SAP ECC) 5.00, the following functions from the SAP beverage industry solution are available for the consumer products industry:* SAP ECC 5.00, consumer products (EA-CP 500)- Material sorting- Extra charge- Empties management- Part load lift orders- Pendulum list indirect sales- Sales returns- Excise duty* SAP ECC 5.00, supply chain management extension (EA-SCM 500)- Direct store delivery back-end- Master data- Visit control- Transportation planning (including loading units, aggregation categories)- Vehicle space optimization- Output control (including valuated delivery note)- Route accounting (including tour data entry, cash payer, route settlement)* SAP ECC 5.00, industry-specific sales enhancements (EA-ISSE 500)- Extended rebate processing.
5.Credit Management:-Integrating sales and distribution (SD) credit management with SAP Credit Management application:With SAP ERP 6.0 application, you can also use SAP Credit Management in SAP Financial Supply Chain Management set of applications (FIN-FSCM-CR) to perform all credit checks and commitment updates for all areas of sales (SD-BF-CM). In SAP Credit Management, you can update the data from multiple systems. This enables you to execute credit checks with consistent data in distributed systems, too. Furthermore, you can connect to external credit information providers by extensible markup language (XML) interfaces. Alternatively, you can continue to use SD Credit Management (SD-BF-CM).
6.E-Commerce: Catalog Management :-As of SAP ERP 6.0 application, you must carry out product catalog replication from your ERP solution to the Text Retrieval and Information Extraction (TREX) server for use in the Web shop, using the report ISA_CATALOG_REPLICATION.
7.E-Commerce: Quotation and Order Management:- Order creation with reference to a contract that has been displayed* Lock of sales documents to avoid concurrent access during the order change process* Display of bills of material in the shopping basket* Free goods processing* Processing of grid products for the SAP Apparel and Footwear application* One-step business order processing* Selection of multiple transaction types in the shopping basket* Credit card support in business-to-business (B2B) Web shop* Material number format conversion* Maintenance of delivery priority in the shopping basket (B2B)* Document search for all documents across all sales areas* Interprocess communication-characteristic value display in basket and order confirmation
8.E-Commerce: Selling Over eBay:-Creation and management of product listings on eBay leverages the e-commerce order management and fulfillment capabilities of the SAP ERP application by easily tying existing tax, pricing, shipping, and payment configurations to post-auction processing. Enhancements in 2005: * You can use the business-to-consumer (B2C) checkout instead of the eBay checkout. With the B2C checkout, you can maximize cross-selling and up-selling opportunities by leveraging B2C functionality, determine tax and shipping using the elaborate methodologies available through condition techniques in SAP ERP 6.0. * E-mail notification scenario: winner notification to keep the auction winner updated with the status of the auction and of his or her order * Monitoring through features such as single-activity trace (SAT), heartbeat, and logging * Creation and publishing of multiple-item auctions and manual retraction of winners
9.E-Commerce: User Management:-- Web-based user management for business-to-business internet users - Assignment of authorization roles to users in web-based user management - Automatic migration of SU05 to SU01 internet users
10.Enterprise Services in Sales Order Management:-Please check in the Enterprise Services Workplace site which enterprise services are available for sales order management on the SAP Developer Network site (www.sdn.sap.com).
11.Internet Pricing and Configurator (IPC):-The IPC is enhanced and integrated to allow configuration within the sales documents of the SAP ERP application reusing existing model data while leveraging its improved functionality and advanced user interface within SAP ERP.
12.Price Catalog (PRICAT): Inbound Processing (Retail):-Inbound message processing of PRICAT essages:As of SAP ERP Central Component enterprise extension retail 6.0 (EA-RET 600) component, you can create and change article data automatically, or in an interface for mass data handling. The system takes both single and generic articles and bills of material and prices into account.
13.Rebate Condition Records Using Scales:-As of SAP ERP 6.0 application, you can set up rebate agreements so that the scale base value and the rebate scale level is derived from the total sales volume of multiple condition records. You do this by grouping condition records in the rebate agreement.
14.SAP Role: Internal Sales Representative:-SAP role internal sales representativeThis role delivers all the functions to fulfill the requirements of an internal sales representative. This includes tasks such as answering phone calls from customers and prospective customers, processing incoming inquiries and sales orders, and preparing quotations and sales contracts.Target groupThe responsibilities of an internal sales representative (or customer service representative) include the following:- Answering phone calls from customers and prospective customers- Answering product, price, and order status related questions- Processing incoming inquiries and sales orders- Preparing quotations and sales contracts- Taking sales orders and ensuring successful order processing for example, taking care of the completeness of sales documents, releasing delivery-blocked orders, and so on - Support for the outside sales force for example, checking on quotations, updating customer master data, and so on- Preparing reports and sales analyses for the sales manager and the sales teamWork overview This work center gives you an overview of your daily work and gives you easy access to your most important tasks. Sales documents This work center allows you to work on all your sales documents. You can create and maintain inquiries, quotations, sales orders, sales contracts, scheduling agreements, and billing documents. Order fulfillment This work center allows you to monitor order fulfillment. You can display deliveries, backorders, and shipments, and can check product availability.Master data This work center enables you to work on all your master data. You can create and maintain business partners, customer agreements, prices and conditions, and products.
I hope it will help you
Regards,
Murali.

What is the major differences between SAP CRM 4.0 and SAP CRM 5.0?

Dear all,
Please let me know the major differences between CRM 4.0 and CRM 5.0 versions?
Your suggestions will be highly appreciated.
Thank you
Raghu ram

Hi Raghu,
In order to find out the differences between SAP CRM 4.0 and SAP CRM 5.0, you will find no better documentation than the release notes availalble at the following link:
[https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000429833&_SCENARIO=01100035870000000202&]
There are several functional improvements, and lot of new functionalites and also better integaration points with SAP ECC. Some of the new features like Visit Planning, Warrenty Claims, Enhanced and easy configurable/ customizable IC Webclient, New concept of Marketing Organization in Org Model. For further information, go through the release notes.
regards
Srikantan

Difference between SAP BI 7.0 and SAP Business objects

Dear All,
I would like to know what is the difference between SAP BI 7.0 and SAP Business objects.What Advantage will we have if we implement sap business objects rather then SAP BI 7.0.WOur management wants to implement

Hi,
Strategies for better reports, queries, Web reporting, formatting, dashboards, cockpits, planning, and performance management
advantages of BO
Crystal Reports XI is the latest version of the report writer from Business Objects. Local reports guru David McAmis takes the new version for a spin.
Most developers might know Crystal Reports from versions included in Studio, Visual Studio.NET, and other popular developer IDEu2019s such as BEA Workshop, C# Builder, Delphi 2005, JBuilder, WebSphere.
In this latest installment both report and application developers have something to be excited about as there are a host of new features for report design and integration. Hereu2019s a run-down of what you can expect in this release.
What's New in Xcelsius version 4.5
Xcelsius now provides the following new components:
Candlestick and OHLC Chart components
The open-high-low-close and candlestick charts are primarily used to display stock data. Each marker corresponds to the four values, which are represented as lines attached to the marker on the OHLC chart and as colors on the candlestick chart. Open displays the opening price of the stock. High displays the highest price the stock achieved on that day. Low displays the lowest price the of the stock on that day. Close displays the closing price of the stock.
For more advantages go through the below link
http://www.crimson-consulting.com/marketing/experience/knowledge/white_papers/cognos_tco.pdf
For BI go throug hthe below link
http://www.elegantjbi.com/Why-Business-Intelligence-better/business-intelligence-advantage.htm
Regards,
Marasa.

Difference between sm$ts_avail, sm$ts_free and sm$ts_used

Hi,
Please let me know about difference between sm$ts_avail, sm$ts_free and sm$ts_used?
As far as i know, sm$ts_free shows same free space as the dba_free_space.
But what about sm$ts_avail and sm$ts_used?
Thanks.

Views you are talking about are now almost paleolithic dictionary structures of oracle rdbms, still present in the newer releases probably only due to
the some sort of internal compatibility and/or dependencies that are very likely too complicated to be removed and left out 'just like that' from the future releases.
Werner is absolutely right, but it seems you forgot to mention those few relevant and often very useful informations that are here so often requested abd missed by the OP...maybe you were under the impressions of the '$' objects.
Those objects you asking about are views that were originally installed and created with the [Server Manager|http://download.oracle.com/docs/cd/A57673_01/DOC/dcommon/oin/indexj.htm] installation.
I guess they are still somehow related to now-days similar system management tools like for example Oracle enterprise manager or Grid control.
Differences can be observed in several ways :
One would be:
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
PL/SQL Release 10.2.0.4.0 - Production
CORE    10.2.0.4.0      Production
TNS for Linux: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
SQL>
SQL>
SQL> SELECT dbms_metadata.get_ddl('VIEW','SM$TS_AVAIL') from dual;
DBMS_METADATA.GET_DDL('VIEW','SM$TS_AVAIL')
CREATE OR REPLACE FORCE VIEW "SYS"."SM$TS_AVAIL" ("TABLESPACE_NAME", "BYTES")
AS
select tablespace_name, sum(bytes) bytes from dba_data_files
    group by tablespace_name
SQL> SELECT dbms_metadata.get_ddl('VIEW','SM$TS_USED') from dual;
DBMS_METADATA.GET_DDL('VIEW','SM$TS_USED')
CREATE OR REPLACE FORCE VIEW "SYS"."SM$TS_USED" ("TABLESPACE_NAME", "BYTES") A
S
select tablespace_name, sum(bytes) bytes from dba_segments
    group by tablespace_name
SQL>

Difference between SBO 8.8 PL19 and SBO PL19 hotfix 1

Hi,
I'm trying to look for differences between SBO 8.8 PL19 and SBO 8.8 PL19 hot fix1. It would be great if anyone could please help.

Hello MadCar - welcome to the SAP B1 forum...
Did you check the release notes and read me files associated with each one of the items you wrote about???
Did you receive any release notes or read me files???
They usually contain information you cannot find anywhere else about what is being released or sent out...
Regards - Zal

Difference between ME_UPDATE_REQUISITION in 4.0 and 4.7

Hi,
Could any one please let me know what is difference between ME_UPDATE_REQUISITION in 4.0 and 4.7 and how to over come the difference.
for eg :
In SAP 4.0 SAP 4.7
a. In UEBAN Structure there is no field called a. In UEBAN Structure there is Field called BANPR BANPR.
I need to access this field in SAP 4.0 how to over come this ???
Regards,
Tinu.

Hi;
But, to be specific i need to know the functionality difference between these releases for Financial modules.As I said AFAIK there are no fuc. difference between 12.04 and 12.0.6.
Lets say, some major/minor functionality has been added to modules like AP, GL, CM. which we need to take care while migrating the objects.When you apply 12.0.6 patch it could be change some field in forms, its mean if you have custom code than some field can be add or remove wiht new patches and your custom related object can be fail.
Please see:
Upgrade 12.0.4 to 12.0.6
difference between Patchset 12.0.4 ( R12.IBE.A.4) and 12.0.6 (R12.IBE.A.6)
http://blogs.oracle.com/stevenChan/entry/ebs_12_0_extended_support
Regard
Helios

Difference between cleared items,open items and all postings (FI).

Hi experts,
Can anybody tell me the difference between cleared items,open items and all postings for an account.
While running corresponding bapis and transaction FAGLL03 (for GL) or FBL1N (for accounts payable) i found that in some cases all postings is less than cleared items or open items for a time period. How could it happen.According to my knowledge all postings should contain cleared items and open items.
Please correct me..
Thanks and Regards
Arjun

Hi Arjun,
For every Billing Documnet created(VBRK/VBRP-VBELN) there will be an accounting document created in BSID/BSAD tables.
OPEN ITEMS means the Billed/Invoice Amounts that are pending from Customers, i.e which we have to receive from Customers.
CLOSED ITEMS means the AMOUNTS received from that customer.
OPEN ITEMS : fetch data from BSID table Only
CLOSED ITEMS : fetch data from BSAD only.
ALL POSTINGS : fetch data from both BSID and BSAD.
Hope this will help.
Regards,
Nitin.

The Difference between iphone Unlock T-Mobile and iphone Unlock Free-Sim

As mentiond in the title my questions are:-
- What is the Difference between iphone Unlock T-Mobile and iphone Unlock Free-Sim?!
- Did they both work Internationally?!
- For the Unlock T-Mobile should i use their sim or i can use any sim directly?!
Thanks

Unlocked means unlocked and you can use any sim card and keep changing them and the phone will never lock if it is unlocked.
Sim free, means that the phone is sold at full price without a sim card, but the phone will lock to the first sim card that you put in it. A sim free phone will work internationally, but you will have to use a roaming plan with your phone company because the phone will be locked, so you CANNOT change it to a local sim card.
If you have an unlocked phone, you can use it internationally by inserting a local sim card and the phone should then work and you won't have to pay increased roaming charges as you would with a locked phone.
If you buy a T-Mobile phone that is unlocked, DO NOT activate it with their sim card or the phone will lock to T-Mobile and you will have to approach them to get it unlocked. Use it with another sim card straight away and it will remain unlocked.

The Difference between Extending a Wireless network and WDS?

I have an Extreme (n) and an Express (n).
I want to make sure the signal is strong upstairs and share a printer (connected to the express) and use AirTunes. I also may add an external drive to the Extreme.
What's the difference between Extending a Wireless Network and using WDS? Will there be a speed difference?
Message was edited by: J. Christopher Edwards

I think you don't get it
If I have another draft N router that operates at 2.4G and I have only n devices I can still use WDS and it will connect using draft n in the 2.4G band.
If one g device connects to the network will go in mixed mode.
The AEBS will still report 130 Mbps for your n clients and 54 for your g clients.
If the other router is g only obviously you can't connect between the two router at n mode but still the AEBS will be in mixed mode and not in g. The Extreme will still report 130 Mbps for the connected n clients.
I can tell you that because I have actually implemented it am not taking off the documentation.
The same device if I try to use the "extend n network" does not even see the AEBS but will happily keep the n in the WDS mode and though the bandwidth is halved it is still more than g.
In any case enough for this!

Difference between Release DP to SNP and Release profile

Similar Messages

Maybe you are looking for