Difference between REN and G2n and their process flow

Hi,
I have one doubt in REN and G2N item category.In which scenario we will use this?
As per my knowledge when the customer return the goods then the system will trigger REN item category.Here is delivery related billing.
Process Flow> RE (order type)---LR(return delivery)---RE( credit invoice)
In second scenario, when the customer doesn't send back the goods and the comnay decide to give him credit notes at that time we use G2N item category.Here no goods movement is recorded.Here is order related billing.
Process flow is CR(order type)----
G2( Credit Invoice)
If my understanding is wrong then please guide me.
Regards
Debasish

Hi
REN: If customer sends back the goods due to various reasons, Return sales order needs to be created for which item category is going to be REN, Followed by delivery and PGR(Post Goods Receipt) and billing.
G2N: If there is any exess amout charged or some discount missing in the billing to the customer, this value can be adjusted to teh customer by creating credit memo request and it is not relevant for delivery. Subsequently Credit memo (BILLING).
Regards,
Ravi Duggirala

Similar Messages

Difference between Service data objects and process data object

Hi
Can anybody tell me what is the difference between SDO (Service Data Objects) & PDO (Process Data Objects).I am using 2 port PCI-CAN series 2 card.
If anybody knows the answer then please reply.
Thanking You

Hi,
See the online help file from our NI CANopen Library for LabVIEW for some basic informations about SDOs and PDOs.
More information should be available from the web.
DirkW
Attachments:
lvcanopenvhelp.zip ‏154 KB

What is the difference between Commitment, assigned, actual and available in the shopping cart process

What is the difference between Commitment, assigned, actual and available in the shopping cart process? Also what are the different commitment stages?

Hi Tejas,
Is these terms related to WBS Budget ?
If yes, then they are just general terms FI use in WBS.
Actual : Actual budget assigned to WBS
Assigned : Budget consumed after SC is approved and PO is created
Committed : Budgete assigned to a SC or PR (PO not created)
Available : Available budget (Actual - Assigned - Committed)
Best Regards,
Anil

What's the difference between a web site and a web application?

I'm stumped trying to come up to a difference between a web site and a web application for myself. As I see it, a web site points to a specific page and a web application is more of some sort of 'portal' to content and information.
But where I'm stuck is that a web application is still viewed through a browser (is it not?) and a web site can still view content dynamically, making the line between web site and application prety gray.
For instance, does a web site using ASP.NET or AJAX (I assume ASP.NET is AJAX's proprietary sibling, if not, ignore ASP.NET AND concentrate on the AJAX), becomes a web application because it can retrieve data dynamically and asynchronously or would a website
using PHP and a CMS be more of a web application because it forms the pages on request, based on the request of the client and its content in its databse?
Or maybe I'm totally wrong here - what differenciates between a web application and a website?
http://support.peopleperhour.com/entries/68630566--C-mon-lets-Watch-The-Other-Woman-2014-full-movie-online-free
https://glossicom.zendesk.com/entries/68643806--%D0%BC-v%C9%AA%C9%9Bc-%C3%A4st-Watch-The-Lucy-2014-full-movie-free
https://cloudhance.zendesk.com/entries/68115098--%D0%BC-v%C9%AA%C9%9Bc-%C3%A4st-Watch-The-Lucy-2014-full-movie-free
This is totally personal and subjective, but I'd say that a website is defined by its content, while a webapplication is
defined by its interaction with the user. That is, a website can plausibly consist of a static content repository that's dealt out to all visitors, while a web application depends on interaction and requires programmatic user input and data processing.
For example, a news site would be a "website", but a spreadsheet or a collaborative calendar would be web "applications". The news site shows essentially the same information to all visitors, while the calendar processes individual data.
Practically, most websites with quickly changing content will also rely on a sophisticated programmatic (and/or database) backend, but at least in principle they're only defined by their output. The web application on the other hand is essentially a program that
runs remotely, and it depends fundamentally on a processing and a data storage backend.
http://support.peopleperhour.com/entries/68125597--%D0%BC-v%C9%AA%C9%9Bc-%C3%A4st-Watch-The-Lucy-2014-full-movie-free
https://cloudhance.zendesk.com/entries/67541393--Watch-The-Godzilla-2014-free-Online-Full-Movie-HD-Quality
http://support.peopleperhour.com/entries/68168787--Watch-The-Godzilla-2014-free-Online-Full-Movie-HD-Quality
https://glossicom.zendesk.com/entries/68161538--Watch-The-Godzilla-2014-free-Online-Full-Movie-HD-Quality
There is no real "difference". Web site is a more anachronistic term that exists from the early days of
the internet where the notion of a dynamic application that can respond to user input was much more limited and much less common. Commercial websites started out largely as interactive brochures (with the notable exception of hotel/airline reservation sites).
Over time their functionality (and the supporting technologies) became more and more responsive and the line between an application that you install on your computer and one that exists in the cloud became more and more blurred.
If you're just looking to express yourself clearly when speaking about what you're building, I would continue to describe something that is an interactive brochure or business card as a "web site" and something that actually *does something that feels
more like an application as a web app.
The most basic distinction would be if a website has a supporting database that stores user data and modifies what the user sees based on some user specified criteria, then it's probably an app of some sort (although I would be reluctant to describe Amazon.com
as a web app, even though it has a lot of very user-specific functionality). If, on the other hand, it is mostly static .html files that link to one another, I would call that a web site.
Most often, these days, a web app will have a large portion of its functionality written in something that runs on the client (doing much of the processing in either javascript or actionscript, depending on how its implemented) and reaches back through some
http process to the server for supporting data. The user doesn't move from page to page as much and experiences whatever they're going to experience on a single "page" that creates the app experience for them.

...can i make as many iweb websites as i want? ...and as many blogs as i want? ...i have never made one before....
....although, i do have my own small business and i do have a website that i paid a guy to make and also host....(which is a waste of $$$$ in my opinion as i think i can do a better job making one myself through iweb) ....
...anyways, i know it is splitting hairs but what exactly is the diff b/w a blog and a website ....i am under the impression that a blog is just a personal newsletter sort of thing,...?

Difference between ECC 6.0 and earlier versions

Hi,
one of the difference between ECC 6.0 and earlier versions is that instead 'WS_UPLOAD' and 'WS_DOWNLOAD' in ECC we should use 'GUI_UPLOAD' and 'GUI_DOWNLOAD' respectively.
(of course SPDD and SPRO tcodes is known by everone i suppose)
Similarly can u all put down some differences here, atleast one entry by each, I think we can make a good docu. I have searched the net for the differences but could not get much, so by each of us contributing one each, it would become good docu..for all of us.
Thanx in advance

Unicode Errors Encountered and their Solutions
E1. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified.
     Error:
     OPEN DATASET FILE FOR OUTPUT IN TEXT MODE.
     Solution:
     OPEN DATASET FILE FOR OUTPUT IN LEGACY TEXT MODE.
E2. In Unicode, DESCRIBE DISTANCE can only be used with the IN BYTE MODE or IN
      CHARACTER MODE addition.
     Error:
     DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIEBO01 INTO BPOS.
     Solution:
DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIENR01 INTO BPOS
IN CHARACTER MODE.
E3. u201CUSR02-UFLAGu201D must be a byte-type field (Typ X or XSTRING )
     Error:
     IF USR02-UFLAG O YULOCK.
     Solution: Since the data type of USR02-UFLAG is type INT and is compared with data type
                X u2013 Hence the error. So we define a new variable ZULOCK and assign the
                value of USR02-UFLAG to ZULOCK.
              New variable
              DATA: ZULOCK(1) TYPE X.   "APBRP00
              Assign value
                            ZULOCK = USR02-UFLAG.
        Compare -
               IF ZULOCK = YULOCK.   u201Creplace IF USR02-UFLAG O YULOCK.
E4. HT cannot be converted to a Character type field
Error :
WRITE ht TO t_data+10(2).
Solution : Since the data type of ht is a type u2018Xu2019 and the data is been transfer to
         t_data which has a data type u2018Cu2019. value of one data type cannot be copy to
         another data type where one of them is type string .Hence the error occur,
         so the data type of ht is been change to Type u2018Cu2019
     OR
           A Tab ( value 09 ) is introduced as part of the row. The value 09 is not converted in Unicode environment. Instead we need to use class
     Error:
          DATA: BEGIN OF ht,
               x(1) TYPE x VALUE '09',
          END OF ht.
     Solution:
              Define Class after the Tables definition.
                   CLASS cl_abap_char_utilities DEFINITION LOAD.
              Data Defination : Comment internal table HT and define a variable HT type C.
       *   Insert + APRIA00 05/02/2007 Unicode project
       *   DATA: BEGIN OF ht,
     *         x(1) TYPE x VALUE '09'
       *   END OF ht.
     *   Insert - APRIA00 05/02/2007 Unicode project
       DATA HT type C.
       Before using HT assign Horizontal tab.
                 Ht = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E5. In Unicode programs the u201C#u201D cannot appear in names, as it is does here in the name    u201C#LINESu201D
     Error :
     #LINES                 TYPE I,
     Solution : Since the # is used in the start of name, it is not allowed. We need to
              remove it.
     Solution for the above
     V_LINES                 TYPE I,
E6. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified as well as the addition was required FOR OUTPUT,FOR INPUT, FOR APPENDING OR FOR UPDATE was expected.
     Error:
     OPEN DATASET PATH_NAME IN TEXT MODE.
     Solution:
     Download =     OPEN DATASET PATH_NAME FOR OUTPUT IN LEGACY TEXT MODE.
     Upload        = OPEN DATASET AUSZUG-FILE IN TEXT MODE FOR INPUT ENCODING DEFAULT.
E7. u201CTABu201D must be a character-type data object( data type C,N, D, T or String). Field string)
     Error:
            data: begin of tab,                   "Excel Parameter Split at TAB
        t type x value '09',          "Tabulator
       end of tab.
            concatenate 'Material' 'Package Status'
                into z_download-line separated by tab.
            ( In the above command the two field are to be separated with a horizontal Tab. The earlier      way of assigning the tab value u201809u2019 will not work in Unicode environment.
     Solution:
     Define a class just after the Table defination.
          CLASS cl_abap_char_utilities DEFINITION LOAD.
            Define variable Tab as shown below :
          Data : TAB           TYPE C.
     Before the concatenate statement assign the value of Tab using pre-defined attributes.
          TAB = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E8. Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not Unicode-
      enabled; use the class cl_gui_frontend_services
     Error-1: Function WS_DOWNLOAD is obsolete in Unicode environment.
            call function 'WS_DOWNLOAD'
                 exporting
                      filename = zfilename
                 tables
                      data_tab = z_download.
     Solutions-1: Instead of WS_DOWNLOAD use GUI_DOWNLOAD.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
*   BIN_FILESIZE                  =
    FILENAME                      = zfilename
TABLES
    DATA_TAB                      = z_download.
E9. The "/" character is reserved for identification of namespaces. It must be entered twice.
        The name of a namespace must be at least 3 characters long.
     Error :
                 U/N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
     Solution :
     * Special character can not be used to define a data variable
     *      U/N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
              U_N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
     * Insert - APSUS02 07/02/2007 Unicode Project
E10. "LP_TAB" and "CS_TAB" are not mutually convertible. In Unicode programs,
         "LP_TAB" must have the same structure layout as "CS_TAB", independent of the length
         of a Unicode character.
     Error : This error is encountered when data from one internal table is copied to another
                         internal table which different structure. In this case its LP_TAB & CS_TAB.
                 LP_TAB[] = CS_TAB[].
     Solution :
          * Replace + APSUS02 07/02/2007 Unicode Project
*   LP_TAB[] = CS_TAB[].
              move-corresponding CS_TAB to LP_TAB.
          * Replace + APSUS02 07/02/2007 Unicode Project
E11. Could not specify the access range automatically. This means that you need a RANGE
          addition.
     Error : Range need to be specified as an addition to the command.
            DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1).
           Solution :
            DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1)
          * Insert + APSUS02 07/02/2007 Unicode Project.
                                                      RANGE ABCD+0(4).
* Insert - APSUS02 07/02/2007 Unicode Project.
E12 . Processing Terminated Error code: Error in opening /
                                          Path not found when downloading to Unix directory.
     Error : PARAMETER: outfile(92) DEFAULT
              '/CP/interface/NPP/data/MX/cbslaprcpts'
                    LOWER CASE,
               kmxmstrd AS CHECKBOX.
            This error is encountered when the path is missing. The above path is related to CCP.
     Solution: For testing purpose comment the original path and replace it with
                                 /CP/interface/CCD/Unicode_test/
E13.    Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not                                                                       Unicode- enabled; use the class cl_gui_frontend_services
     Error: Function WS_UPLOAD is obsolete in Unicode environment. (During UCCHECK)
               Call function 'WS_UPLOAD'
       Exporting
            Filename                = zfilename
            Filetype                = u2018DATu2019
       Tables
            data_tab                = z_upload
       Exceptions
            Conversion_error        = 1
            file_open_error         = 2
            file_read_error         = 3
            invalid_table_width     = 4
            invalid_type            = 5
            no_batch                = 6
            unknown_error           = 7
            gui_refuse_filetransfer = 8
            others                  = 9.
     Solution: Instead of WS_UPLOAD use TEXT_CONVERT_XLS_TO_SAP. Do not use temporary file put the file name as it is.
1) First define a type pool and a variable of type truxs_t_text_data.
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
     2) Use this it_raw in the function module in parameter i_tab_raw_data. Put file name and the internal table in the function module.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
*     I_FIELD_SEPERATOR        =
*      i_line_header            = ' '
      i_tab_raw_data           = it_raw       " WORK TABLE
      i_filename               = zfilename
    TABLES
      i_tab_converted_data     = z_upload[]    "ACTUAL DATA
   EXCEPTIONS
      conversion_failed        = 1
      OTHERS                   = 2.
     Comment u201Ci_line headeru201D. It takes the first/ header line of the file which is to be uploaded.
Put square brackets after internal table as shown above.
E14.    CURSORHOLD may not be converted into a number.
     Error: GET CURSOR LINE CURSORHOLD VALUE CURSOR_HOLD.
     Solution: In the declaration part of CURSORHOLD, one field is of u2018Pu2019 type and one field is of u2018Iu2019 type, which is not allowed in Unicode environment.So change the the type of it to NUMC.

Difference between ALBPM6.0 studio and ALBPM6.0 Enterprise server

Difference between ALBPM6.0 studio and ALBPM6.0 Enterprise server.Can anyone help on this.
Thanks in advance.

Studio is the integrated development and test environment. As such, it's intended for designing processes, creating the UI for the screenflows, creating the objects and introspecting services that you want to tie into the process. Studio has a runtime engine that can be used by a single developer for testing purposes. It runs a little database called Derby and a Tomcat Web Server - again so the work done by a single developer can be tested on the developer's machine at runtime.
Enterprise on the other hand is the production environment. Unlike Studio, it does not have the capability to develop projects. It is the runtime environment where many end users can concurrently run their instances on an industrial strength engine. It can run on a standalone JVM or an application server.
Studio is for development. Enterprise if for Dev/QA/production environments where many users need to hit the engine and many instances need to run concurrently.

Difference between a WEB service and a Enterprise Service?

Can Anybody explain me the difference between a WEB service and a Enterprise Service?

Hi Anilkumar K Naidu ,
Web service
A Web service is a self-contained, modularized functionality, which can be published, discovered, and accessed across a network using open standards and which is supported by SAP NetWeaver. Web services cover services provision for integration within an enterprise as well as cross enterprises on top of any communication technology stack, whether asynchronous or synchronous, in any format.
Web Services in the NetWeaver framework play an important role in facilitating the integration of disparate applications from various departments or trading partners and thus increasing business productivity. This benefit allows small and medium businesses also to integrate their business applications with larger trading partners. The benefit derived from this seamless integration introduces security concerns when all the business logic is now being exposed through a standard interface that is a catalyst for security vulnerabilities. SAP Security Managers must use automated diagnostics tools to ensure that the security vulnerabilities are caught in pre-production and in post-production phase.
Web Services Testing: SAP Netweaver Platform
http://www.crosschecknet.com/web_services_testing_SAP.php
How Web services play a key role on the SAP NetWeaver
http://www.sap.info/public/INT/int/index/Category-28943c61b1e60d84b-int/0/articlesVersions-500244687cbd30ffd
How to develop a Simple Web Service Application Using SAP NetWeaver Developer Studio & SAP XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f3ee9d7-0901-0010-1096-f5b548ac1555
How To... Set Up a Web-Service Related Scenario with SAP xi
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/befdeb90-0201-0010-059b-f222711d10c0
Enhancing Your Web Services with SAP Exchange Infrastructure
http://www.sappro.com/downloads/SAPXI.pdf
Web Services, Part XI: Consuming Multiple Web Services
http://www.webreference.com/js/column106/
Vulneribility assesment of SAP Web Services
http://www.crosschecknet.com/resources/white_papers/sap_va.pdf
Enterprise Service
Enterprise Service-Oriented Architecture (Enterprise SOA)
Enterprise SOA is a blueprint for an adaptable, flexible, and open IT architecture for developing services-based, enterprise-scale business solutions. With SAP NetWeaver as a technical foundation, enterprise SOA moves IT architectures to higher levels of adaptability and moves companies closer to the vision of real-time enterprises by elevating Web services to an enterprise level.
An enterprise service is typically a series of Web services combined with business logic that can be accessed and used repeatedly to support a particular business process. Aggregating Web services into business-level enterprise services provides a more meaningful foundation for the task of automating enterprise-scale business scenarios.
SAP Enterprise Services Architecture
http://en.wikipedia.org/wiki/SAP_Enterprise_Services_Architecture
ENTERPRISE SERVICEORIENTED ARCHITECTURE DESIGN, EVELOPMENT,AND DEPLOYMENT
http://download.sap.com/platform/esoa/brochures/download.epd?context=FB8D5E235B637255604CD1EDB755014400C523BC4E4632245A59C838A212B5F04C71A43F8B38FC591628F4C698D8CAA859405AA974284758
Enabling Enterprise Services
http://help.sap.com/saphelp_nw04s/helpdata/en/80/be7042f1e6d242e10000000a1550b0/content.htm
Enterprise Service-Oriented Architecture
https://www.sdn.sap.com/irj/sdn/enterprisesoa
Define Enterprise Services using the Enterprise Services Community
https://www.sdn.sap.com/irj/sdn/define-es
Enterprise service bus
http://en.wikipedia.org/wiki/Enterprise_service_bus
Enterprise Services Workplace
http://erp.esworkplace.sap.com/socoview(bD1lbiZjPTgwMCZkPW1pbg==)/flddisplay.asp
cheers!
gyanaraj
****Pls reward points if u find this helpful

Difference between Activating Master Data and Attribute Change Run

Hi
Is there any difference between Atribute change run and Activating Master data functionaaly???
if wha it is???
can any one explain clearly?
Thanks
Chinna

When u load master data and its attribute to ur data target and if u change any data or attributes of ur master data,in order to update new data to ur data target attribute change run is performed.
When u create a characteristic and if u keep it as master data and activated..it is master data activation
Activating Master Data
When you update master data from an SAP system the master data is imported in an inactive state. You must activate the new master data so that it can be accessed and used for reporting purposes.
For more information, see Versioning Master Data.
Choose the path InfoObject Tree Context Menu of Corresponding Characteristic Activate Master Data.
Upon Activation there are two scenarios to choose from:
The Corresponding Master Data Is Already Being Used in Aggregates in the InfoCube:
If you are already using the available master data in aggregates in InfoCubes, you cannot activate the master data individually. In this case, proceed as follows:
1. In the main menu, choose the path Tools Hierarchy/Attribute Change.
2. Proceed as described in System Response upon Changes to Data: Aggregate.
The system now automatically restructures and activates the master data and its aggregates.
Please note that this process can take several hours if the volume of data is relatively high. Therefore, you should simultaneously activate all of the characteristics that are affected by changes to their master data, at regular intervals.
The Corresponding Master Data Is Not Used in Aggregates:
Choose the path InfoObject Tree ® Context Menu of Corresponding Characteristic Activate.
The system now automatically activates the master data so that it can be used directly in reporting.
If there is any change r newly added records in master data..then that particular data will not b avialable for the reporting unless u do activate master data...
if u r using aggregates and then there is any change in master data ...then that particular master data change wil not b available for the reporting unless u do arrtibute change run for that info object.(T-code RSATTR)
Master data attributes and hierachies are used in cube aggregates also. So to do update the latest master data attributes values in the aggregtes attribute change run need to be performed.So Attribute change run also updates the master data attributes in aggregates which is not apart of master data activation.
Text loads do not need attribute change run. Attributes, hierarchies and aggregates need attribute/hierarchy change runs. If you do not have aggregates, just activating the master data is same as attribute change run.

What's the difference between an audio INPUT and AUX object?

Can someone explain the difference between an audio INPUT and AUX object? They both seems to do pretty much the same thing ... when would you use 1 over the other?

revDave:
Suppose you're recording a guitar track and you want to add a very gentle compressor to avoid overload during the rec process. you need an audio input channel with a compressor inserted. this way, your guitar will be recorded with the compressor processed. If you use audio and midi gear and want to bounce your material, put all your midi audio in an audio input channel.This way, you don't have to use a real audio channel to record them. You can hear them, even use some plugins, and have them bounced with your audio channels.
Now, suppose you recorded three vocal channels, and want to use an equalizer. You need an aux object to send your vocal channels and use only one eq. This is very useful when you have similar materials recorded in diferent channels (2 guitars, vocals, pete/sax/bone, and so on). Send their outs to an aux object, insert the fx you want, and set the aux object's out to the main out of your project, and it's done.
I hope it helps you.
Tovinho

What is the difference between Wine, Wineskin, Winery and Wine Bottler, and how do I get Wine to *ACTUALLY* work in Mountain Lion?

Ok, so this is my first post here and I am admittedly terrible at forums. Someone might say, "This was addressed in the ___________ thread by __________! Go read it!" --- that may be so but I've spent enough hours trying to google this problem into submission to no avail based on what is apparently working for others, so I would like a chance to get specific answers to specific questions that aren't from Mar 2011, etc.
So first of all, I'm confused by all the various Wine programs/apps/whatevers. I've seen Wine, Wineskin, Winery, Wine Bottler, and at this point I wouldn't be surprised if there are even more than that. What's the difference between all of these and how do they work with one another? What do I actually need to get windows programs working?
All of my google searches have led me to people giving out fish, but no one giving out fishing lessons. I'm not a pro at mac and windows and all that, but I'm a fairly bright individual who gets VERY frustrated, very quickly, when I don't understand the why and how of something I'm attempting.
I've also found "answers" where the person attempting to help starts off helpful enough, but degrades into the most archaic of techno-babble after about 5-6 sentences. On the other hand, I've watched tutorials on youtube where the poster decides to skip (apparently crucial) sections of the tutorial, and mutters such gems as: "... you might wanna have to run Wine first before you can do anything, cuz I think it has to configure it and set up a bunch of stuff"
O.o
A happy medium between techno-babble and the most basic of explanations would be ideal for me, and I'd imagine for others as well.
Here is a summarized history of my relationship with Wine:
Diablo II - I downloaded this awesome thing which ended up being... uh... I guess Diablo II in a Wineskin "wrapper". I'm not sure, all I know is that it's a D2 icon, and if I go to 'show package contents', it's got C drive, Program Files, et cetera inside of it. I double click it, it launches D2, and it works like a dream. <3
'Vanilla Install' - That's what I heard someone call it. It was the command/terminal style install using xquartz and xcode found at http://www.davidbaumgold.com/tutorials/wine-mac/. I followed every instruction to the letter, and got all the way to '$ sudo port install wine', at which point it started going smoothly, free from the possible error he described regarding the installation of xcode, and then just failed after I left the room to use the restroom and came back. Please don't ask me to repeat what the error was, because honestly, after reading more things on the interwebs, I'm confused as to why it's even necessary to go through all of that, so I'd rather not try that route again anyways, rendering the error message quite possibly irrelevant.
Wine + Wine Bottler - So I decided to try to seek out an easier method, as I know that one must exist that doesn't involve command lines. I found a video tutorial at http://www.youtube.com/watch?v=m0BBkISOcEA, and oh man would it be great if that method had actually worked. Again, I followed all instructions provided to procure my free fish, and at the point in the video where he declares that "xquarts or x11 will open" - it doesn't open. Nothing opens. I was trying to install Star Sonata, btw.
So here I am, thoroughly worn out, frustrated at all the random places Wine is installed on my mac now, and just want someone to explain it all, from top down, without getting toooooooo technical on me. I know that might be asking a lot...

## I know that the poster has already found a solution, but the following is a possible answer for others that have similar issues.
For Winebottler, just go to their website and download it. Run the program. Choose .wine as your prefix (best choice) or whatever suits you best. You'll need a functional X11. If you can't use the one that comes with your mac, download the latest one from the website.
If your issue is one with Winebottler's Wine not running correctly due to X11, then you have a pretty ugly problem, although a simple upgrade is the best solution (Upgrade XQuartz.app).
http://www.davidbaumgold.com/tutorials/wine-mac/#part-1
The above website is the easiest way to get REAL wine on your computer. First of all, Wineskin WInery, etc. are NOT WINE. They are 3rd party apps that may use Wine or may have originally part of Wine, but they are no longer up to date with Wine. WineBottler is currently up to date with the stable releases of Wine (but not the maintenence releases).
For the website tutorial and to run Wine on your mac without using a thrid party app, you will need to know a few things.
First, you will need to know basic control of the command line. That means, sudo (you must know the administrator password to your computer), and the forms of cd (change directory).
Second, you will need Xcode. Download 4.2 (stable) or whatever other versions you want, but beware: It is over 1 GB, and you will need time for it to work.
Third, you will need to get MacPorts and configure it. The tutorial should have this data.
When you download wine (use sudo port install wine-devel for the latest development release of wine), it will first download a lot of dependencies. This will take a while. After that, it will download wine itself.
After obtaining wine, to run a program, open the terminal.app window.
cd desktop/XYZ/ZYZ\ WRQ
The above will first enter the desktop, then folder XYZ, then folder ZYZ WRQ. From here,
wine th11e.exe
Or whatever executable you are trying to open. (Using Subterranean Animism as my example).
It should, in theory, run the program. Watch the terminal for errors. If there is an X11 problem, then it's not wine acting up. If the app crashes or has other issues, check the Wine Application Database to see if your app is compatible with wine.
If you have any further questions or other things, feel free to reply; I may or may not get back to you, but there's a good chance that someone will come in eventually. Otherwise, the Wine Wiki should have some information.

What are differences between the target tablespace and the source tablespac

The IMPDP command create so manay errors. But the EXAMPLE tablespace is transported to the target database successfully. It seems that the transported tablespace is no difference with the source tablespace.
Why create so many errors?
How to avoid these errors?
What are differences between the target tablespace and the source tablespace?
Is this datapump action really successfull?
Thw following is the log output:
[oracle@hostp ~]$ impdp system/oracle dumpfile=user_dir:demo02.dmp tablespaces=example remap_tablespace=example:example
Import: Release 10.2.0.1.0 - Production on Sunday, 28 September, 2008 18:08:31
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Master table "SYSTEM"."SYS_IMPORT_TABLESPACE_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_TABLESPACE_01": system/******** dumpfile=user_dir:demo02.dmp tablespaces=example remap_tablespace=example:example
Processing object type TABLE_EXPORT/TABLE/TABLE
ORA-39117: Type needed to create table is not included in this operation. Failing sql is:
CREATE TABLE "OE"."CUSTOMERS" ("CUSTOMER_ID" NUMBER(6,0), "CUST_FIRST_NAME" VARCHAR2(20) CONSTRAINT "CUST_FNAME_NN" NOT NULL ENABLE, "CUST_LAST_NAME" VARCHAR2(20) CONSTRAINT "CUST_LNAME_NN" NOT NULL ENABLE, "CUST_ADDRESS" "OE"."CUST_ADDRESS_TYP" , "PHONE_NUMBERS" "OE"."PHONE_LIST_TYP" , "NLS_LANGUAGE" VARCHAR2(3), "NLS_TERRITORY" VARCHAR2(30), "CREDIT_LIMIT" NUMBER(9,2), "CUST_EMAIL" VARCHAR2(30), "ACCOUNT_MGR_ID" NU
ORA-39117: Type needed to create table is not included in this operation. Failing sql is:
ORA-39117: Type needed to create table is not included in this operation. Failing sql is:
CREATE TABLE "IX"."ORDERS_QUEUETABLE" ("Q_NAME" VARCHAR2(30), "MSGID" RAW(16), "CORRID" VARCHAR2(128), "PRIORITY" NUMBER, "STATE" NUMBER, "DELAY" TIMESTAMP (6), "EXPIRATION" NUMBER, "TIME_MANAGER_INFO" TIMESTAMP (6), "LOCAL_ORDER_NO" NUMBER, "CHAIN_NO" NUMBER, "CSCN" NUMBER, "DSCN" NUMBER, "ENQ_TIME" TIMESTAMP (6), "ENQ_UID" VARCHAR2(30), "ENQ_TID" VARCHAR2(30), "DEQ_TIME" TIMESTAMP (6), "DEQ_UID" VARCHAR2(30), "DEQ_
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "SH"."CUSTOMERS" 9.850 MB 55500 rows
. . imported "SH"."SUPPLEMENTARY_DEMOGRAPHICS" 695.9 KB 4500 rows
. . imported "OE"."PRODUCT_DESCRIPTIONS" 2.379 MB 8640 rows
. . imported "SH"."SALES":"SALES_Q4_2001" 2.257 MB 69749 rows
. . imported "SH"."SALES":"SALES_Q1_1999" 2.070 MB 64186 rows
. . imported "SH"."SALES":"SALES_Q3_2001" 2.129 MB 65769 rows
. . imported "SH"."SALES":"SALES_Q1_2000" 2.011 MB 62197 rows
. . imported "SH"."SALES":"SALES_Q1_2001" 1.964 MB 60608 rows
. . imported "SH"."SALES":"SALES_Q2_2001" 2.050 MB 63292 rows
. . imported "SH"."SALES":"SALES_Q3_1999" 2.166 MB 67138 rows
Processing object type TABLE_EXPORT/TABLE/GRANT/OWNER_GRANT/OBJECT_GRANT
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."REGIONS" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."REGIONS" TO "EXAM_03"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."COUNTRIES" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."COUNTRIES" TO "EXAM_03"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."LOCATIONS" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."LOCATIONS" TO "EXAM_03"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."DEPARTMENTS" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."DEPARTMENTS" TO "EXAM_03"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."JOBS" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."JOBS" TO "EXAM_03"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."EMPLOYEES" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."EMPLOYEES" TO "EXAM_03"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."JOB_HISTORY" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."JOB_HISTORY" TO "EXAM_03"
ORA-39112: Dependent object type OBJECT_GRANT:"OE" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type OBJECT_GRANT:"OE" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
ORA-39112: Dependent object type INDEX:"OE"."CUSTOMERS_PK" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type INDEX:"OE"."CUST_ACCOUNT_MANAGER_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type INDEX:"OE"."CUST_LNAME_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type INDEX:"OE"."CUST_EMAIL_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type INDEX:"PM"."PRINTMEDIA_PK" skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
ORA-39112: Dependent object type CONSTRAINT:"OE"."CUSTOMER_CREDIT_LIMIT_MAX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type CONSTRAINT:"OE"."CUSTOMER_ID_MIN" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type CONSTRAINT:"OE"."CUSTOMERS_PK" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type CONSTRAINT:"PM"."PRINTMEDIA__PK" skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
ORA-39112: Dependent object type CONSTRAINT:"IX"."SYS_C005192" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUSTOMERS_PK" creation failed
ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_ACCOUNT_MANAGER_IX" creation failed
ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_LNAME_IX" creation failed
ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_EMAIL_IX" creation failed
ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"PM"."PRINTMEDIA_PK" creation failed
Processing object type TABLE_EXPORT/TABLE/COMMENT
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
ORA-39112: Dependent object type REF_CONSTRAINT:"OE"."CUSTOMERS_ACCOUNT_MANAGER_FK" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39083: Object type REF_CONSTRAINT failed to create with error:
ORA-00942: table or view does not exist
Failing sql is:
ALTER TABLE "OE"."ORDERS" ADD CONSTRAINT "ORDERS_CUSTOMER_ID_FK" FOREIGN KEY ("CUSTOMER_ID") REFERENCES "OE"."CUSTOMERS" ("CUSTOMER_ID") ON DELETE SET NULL ENABLE
ORA-39112: Dependent object type REF_CONSTRAINT:"PM"."PRINTMEDIA_FK" skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
Processing object type TABLE_EXPORT/TABLE/TRIGGER
ORA-39082: Object type TRIGGER:"HR"."SECURE_EMPLOYEES" created with compilation warnings
ORA-39082: Object type TRIGGER:"HR"."SECURE_EMPLOYEES" created with compilation warnings
ORA-39082: Object type TRIGGER:"HR"."UPDATE_JOB_HISTORY" created with compilation warnings
ORA-39082: Object type TRIGGER:"HR"."UPDATE_JOB_HISTORY" created with compilation warnings
Processing object type TABLE_EXPORT/TABLE/INDEX/FUNCTIONAL_AND_BITMAP/INDEX
ORA-39112: Dependent object type INDEX:"OE"."CUST_UPPER_NAME_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/FUNCTIONAL_AND_BITMAP/INDEX_STATISTICS
ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_UPPER_NAME_IX" creation failed
Processing object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
Processing object type TABLE_EXPORT/TABLE/INDEX/DOMAIN_INDEX/INDEX
Processing object type TABLE_EXPORT/TABLE/POST_INSTANCE/PROCACT_INSTANCE
ORA-39112: Dependent object type PROCACT_INSTANCE skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
ORA-39083: Object type PROCACT_INSTANCE failed to create with error:
ORA-01403: no data found
ORA-01403: no data found
Failing sql is:
BEGIN
SYS.DBMS_AQ_IMP_INTERNAL.IMPORT_SIGNATURE_TABLE('AQ$_ORDERS_QUEUETABLE_G');COMMIT; END;
Processing object type TABLE_EXPORT/TABLE/POST_INSTANCE/PROCDEPOBJ
ORA-39112: Dependent object type PROCDEPOBJ:"IX"."AQ$_ORDERS_QUEUETABLE_V" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
ORA-39112: Dependent object type PROCDEPOBJ:"IX"."ORDERS_QUEUE_N" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
ORA-39112: Dependent object type PROCDEPOBJ:"IX"."ORDERS_QUEUE_R" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
ORA-39112: Dependent object type PROCDEPOBJ:"IX"."AQ$_ORDERS_QUEUETABLE_E" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
ORA-39112: Dependent object type PROCDEPOBJ:"IX"."ORDERS_QUEUE" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
Job "SYSTEM"."SYS_IMPORT_TABLESPACE_01" completed with 63 error(s) at 18:09:14

Short of trying to then reverse-engineer the objects that are in the dump file (I believe Data Pump export files contain some XML representations of DDL in addition to various binary bits, making it potentially possible to try to scan the dump file for the object definitions), I would tend to assume that the export didn't include those type definitions.
Since it looks like you're trying to set up the sample schemas, is there a reason that you wouldn't just run the sample schema setup scripts on the destination database? Why are you using Data Pump in the first place?
Justin

What is the difference between a mac-book, and an I-pad?

What is the difference between a mac-book and an I-pad?

The Macbook is a computer (running Mac OS X), an iPad is a tablet (running iOS). What are thinking of using it for ? The Mac is more powerful than iPad, so if you need processing power then that will be better suited for your needs. If you will mainly be using it for media (films, music), internet browsing, emails, ebooks, then an iPad would be sufficient.
Macbook Air : http://www.apple.com/macbook-air/
MacBook Pro : http://www.apple.com/macbook-pro/
iPad Air : http://www.apple.com/ipad-air/

In ical, how can you tell the difference between a meeting invite and email?

When you send a meeting invite in ical, does the recipient receive a different icon in their inbox to differentiate from an email?

For service stock you can't tell the difference between a new iPad and a refurbished one. Both will come in a plain brown box with the same pattern in model numbers. If you mean between a refurbished one and one new at retail, then other than the obvious difference in packaging, I've read that the model number on refurbished units starts with the letter "F", though I've not confirmed that.
Regards.

Difference between a Journal header and a journal line

Hi,
Can anyone please explain the difference between a Journal header and a journal line ? Can we have different journal headers for the same journal import process?
Thanks and regards,

Not sure if I know what you mean, but...
You can organise your journals by using journal headers. A batch can contain many Headers. Like this:
Batch No 1
- Journal Header 1
   - Line 1       Deb: 200$
   - Line 2                      Cre: 100$
   - Line 3                      Cre: 100$
- Journal Header 2
   - Line 1       Deb: 100$
   - Line 2                      Cre: 100$When you run Journal Import, you run for a specific source. So Yes you can have different journal headers for the same import process (if you mean import from GL Interface).
Does this clearify?
Botzy

Differences between xi 3.0 and pi 7.0

Hi friends,
Can anybody please post the differences between XI 3.0 and PI 7.0?
Thanks in advance.

Lou,
From functional point, there is no difference between XI3.0 and PI7.0. There are changes only wrt SP. For every SP release on PI7.0 a corresponding SP for XI3.0 is also released.
A comparision of the service packs in 2004 and 2004s;
in 2004 - in 2004s
SP12 & < - SP04
SP13 + 14 - SP05
SP15 - SP06
SP16 - SP07
SP17 - SP08
SP18 - SP09
For release notes ref:http://help.sap.com/saphelp_nw04/helpdata/en/cf/9844428e9cbe30e10000000a155106/frameset.htm
There is no f'nal difference between XI 3.0 and PI 7.0. In order to bring all netweaver releases on par with each other , SAP released / renamed XI as PI and it is a part of NW04s
For every release of PI 7.0, there is a parallel Support Pack on XI.
Go through this thread which will help you:
PI 7.0 Information
Process Integration (PI) & SOA Middleware
---Satish

Difference between XI 3.0 and PI 7.0

Hi,
What is difference between XI 3.0 and PI 7.0
Is this way we check version:
System-- Staus -- Component Information --
PI_BASIS -- 2005_1_700
So the above system is PI 7.0 -- right?
Regards

Hi Rick,
PI 7.0 works on WEBDYNPRO....They are basically the same technically but when SAP launched Netweaver 2004s , to bring all objects of Netweaver 2004s in Synch with the WAS version, XI was renamed to Process Integration (PI 7.0) .
A comparison of the service packs in 2004 and 2004s;
in 2004 - in 2004s
SP12 & < - SP04
SP13 + 14 - SP05
SP15 - SP06
SP16 - SP07
SP17 - SP08
SP18 - SP09
XI3.0 is based on WAS(web application server)6.40 - NW2004
PI7.0 is based on WAS(web application server)7.0 - NW2004's
http://help.sap.com/saphelp_nw2004s/helpdata/en/d6/369142f195675ee10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/fb4cd3207c7063e10000000a1553f6/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f36ce30f-0e01-0010-a89b-c158d07c44ff
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ec19c05d-0501-0010-09a2-b6db51b5318d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5441afe5-0601-0010-dba5-dc5f9d5caa9d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c50cddbb-0601-0010-92a7-f2a40ca68e6d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f027dde5-e16e-2910-97a4-f231046429f2
Refer these threads as well:
PI 7.0 and XI 3.0
http adaptor on which factors we will use
Diff between XI and PI
Diff between XI and PI
http adaptor on which factors we will use
differences between xi 3.0 and pi 7.0
Difference/ changes from XI 3.0 to PI 7.0
give me main advantages of XI-7.0 TO XI-3.0
XI 7.0 vs Xi 3.0
XI/PI
XI vs. PI
XI 3.0 vs. PI (XI 7.0)
Difference/ changes from XI 3.0 to PI 7.0
moving from XI 3.0 to PI 7
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/xi%2band%2bpi%2bglossary
Regards,
Vinod.

Difference between REN and G2n and their process flow

Similar Messages

Maybe you are looking for