Difference Between SAP ECC. 6.0 and 4.6c

Hi
What is the Difference Between SAP ECC. 6.0 and 4.6c
with respect to module wise, like SD, MM, FI,
thanks
Satish

Hi,
There is lot difference between 4.6c and 6.0
1) ecc 6.0 coming with inbuild webdynpro , BSP it is not 4.6c
2) In ecc we have interactive forms concept where it was not there in 4.6c
3) 4.6c there is no unicode concept here we have unicode and non unicode
You can follow the link also
difference between SAP 4.6C and SAP ECC6.0
Rgds,
Suman

Similar Messages

Difference Between SAP ECC 6.0 and SAP Solution

Dear Experts,
   We are in the process of implementing a new SAP Structure.
    We are taking a hosted model from vendor which is called SBH (Subscription Based Hosting) of SAP Solution
So my question to all experts is that, what is the exact difference between SAP ECC 6.0 and SAP Solution SBH model.
   If any comparison chart, it would be helfull.
Do reply asap.
Thanks in advance,
Nilesh Jain

Hi Nilesh,
Looking at the image below, you will find out that ECC6 is under SAP ERP, and SAP ERP is under SAP Solution:
SAP solution is of a bigger element and ECC 6 is a component of it.
Regards,
Rod

Functional transactional difference between SAP version 4.7 and ECC 6.0

Hi Experts,
Can you Pls tell the Functional transactional difference between SAP version 4.7 and ECC 6.0 in case of Sales and Distribution module.
Like VA05n is one transactional difference,Pls tell the others?
Regards,
Rohan

Hi,
there are lot of changes like i observe
1, in rebates there is no advanced rebate processing in 4.7
2. there is no scale group field in condrecords of agrement in rebate agreement.
3. there are lot of new reports available in SIS
4. in sales returns process also seperate config available in 6.0
regards,
sk

Difference between SAP version 4.7EE and ECC 6.0.

Hi All,
Could you please tell me the major difference between SAP version 4.7EE and ECC 6.0? Also let me know why the industries should go for ECC 6.0?
Waiting for an early response from you.
Thanks a lot in advance!

http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx
Please use above mentioned link, you will find the delta functionalities between various SAP Versions.
Regards,
Ravi

Difference between sap xi 3.0 and sap pi 7.0

hi guys,
what is the difference between SAP XI 3.0 and SAP PI 7.0,and R/3 4.7 and ECC 6.0
regards,
subba reddy

Hi Subba reddy,
Check this link for PI differencess
https://wiki.sdn.sap.com/wiki/display/XI/PI%207.1%20Components%20and%20its%20features%20over%20XI%202.0,XI%203.0,PI%207.0
Regards
Ramesh

What is the major differences between SAP CRM 4.0 and SAP CRM 5.0?

Dear all,
Please let me know the major differences between CRM 4.0 and CRM 5.0 versions?
Your suggestions will be highly appreciated.
Thank you
Raghu ram

Hi Raghu,
In order to find out the differences between SAP CRM 4.0 and SAP CRM 5.0, you will find no better documentation than the release notes availalble at the following link:
[https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000429833&_SCENARIO=01100035870000000202&]
There are several functional improvements, and lot of new functionalites and also better integaration points with SAP ECC. Some of the new features like Visit Planning, Warrenty Claims, Enhanced and easy configurable/ customizable IC Webclient, New concept of Marketing Organization in Org Model. For further information, go through the release notes.
regards
Srikantan

Delta differences between SAP R/3 FI and mySAP Financials

Hi Expert,
Could you please help me to find out the 5 major delta differences between SAP R/3 FI and my SAP Financails on ECC 6.0.
Regards
Yogesh.

ECC 6.0 means it is an latest version of SAP ERP package (ERP Central components). it will support for netweaver and BW.
Chk this links for more details.
ECC 6.0 clarification
Replacement for CONVERT_DATE_INPUT in ECC 6.0
Upgrade from sap 4.7 to ECC 6.0
Upgradation to ERP 6.0 '2005'
Differences between 4.6C and 4.7 EE
To know the functionality changes you can refer:
http://solutionbrowser.erp.sap.fmpmedia.com/
http://www.sap.com/solutions/business-suite/erp/pdf/BWP_ERP2006_Upgrade.pdf
http://service.sap.com/releasenotes
http://service.sap.com/upgrade
Rewards if useful.

What is the difference between SAP NW PI7.1 and PI7.1 EHP1

We have a customer using SAP PI7.1 EHP1. The application to be deployed
isdeveloped on SAP Netweaver PI 7.1 SP06.
We need to know if application developed and transported from PI7.1 is
compatible with EHP1?
Below are the Components used by the application .
1) SSL communication using SOAP adapter
2) Java mapping , Graphical mapping , XSLT mapping
3) Customised EJB modules
4) Adapter framework
5) ALE layer for IDoc communication from ERP to PI
6) RFC lookups to PI system and ERP system.
Questions
1)Will PI EHP1 be able to communicate with PI7.1 using SOAP adapter ?
2) What is the difference between SAP NW PI7.1 and PI7.1 EHP1 ?
Regards,
Sneha

Hi,
EHP Pi7.1 new
IPv6 Support in SAP Systems (new)
Async/Sync and Sync/Async Bridge in the JMS Adapter (New)
High Availability (New) Locate the document in its SAP Library structure
Use
A new concept is available for setting up a high availability environment for SAP NetWeaver Process Integration (PI). To do this, you need SAP Web Dispatcher for load balancing, and you must reconfigure your HTTP, RFC, and RMI connections so that they can be used for load balancing. You must also make various configuration steps in other components of your PI environment.
[Level 4: Document: XML to Text Conversion Module (New)] XML to Text Conversion Module (New)
Message Packaging (New)
Monitoring Milestones (New) Locate the document in its SAP Library structure
Use
You can use the new scenario variant Monitoring Milestones of the Business Process Management scenario to define a monitoring process that can monitor events from different applications. A monitoring process can subscribe to events from SAP or non-SAP systems.
check given Link
http://help.sap.com/saphelp_nwpi711/helpdata/en/61/8c3842bb58f83ae10000000a1550b0/frameset.htm
Regards,
Amit

Using the Open Catalog Interface (OCI) between SAP-ECC 6.0 and SAP-MDM

Hello ASUG Community.
I'm working on an SAP-MDM project where we will configure the OCI interface between SAP-ECC 6.0 and SAP-MDM. The business requirement will be to punch out to SAP-MDM's catalog from SAP-ECC for expensed items (e.g., no material master record exists in SAP-ECC).
The data that will be returned to SAP-ECC will be purchase price info, material group, short text, & our global SAP-MDM item number.
The question I've been trying to design around is "where to store the SAP-MDM item number"?
I've looked into creating a custom filed on EKPO but now feel that a configured text field will be the best solution from an SAP-ECC point of view (less effort on the SAP-ECC side from a development perspective, no need to regenerate the EKPO table, etc.).
The question I'd like to pose to ASUG is.... Does anyone have experience or an opinion to offer using this functionality? It seems that I will have to code in a user exit or BAdi to insure that the SAP-MDM item numbers are returned to the appropriate text field on my POu2019s. Or can this be done using the standard OCI functionality?
I found OSS note 1347656 which references BADI "ME_CATALOG_INTERFACE" but I'm not sure if this right path to go down or if this would be the correct place to code non-conforming OCI mapping requiremetns.
Any insight would be most appreciated.
Thanks. Sincerely,
Rich Wortmann

I would suggest you create a new field for this as you may require thois going forward for reporting as well. Text fields are difficult to report.
Sorry not sure about the BADI to use.

Difference between SAP BI 7.0 and SAP Business objects

Dear All,
I would like to know what is the difference between SAP BI 7.0 and SAP Business objects.What Advantage will we have if we implement sap business objects rather then SAP BI 7.0.WOur management wants to implement

Hi,
Strategies for better reports, queries, Web reporting, formatting, dashboards, cockpits, planning, and performance management
advantages of BO
Crystal Reports XI is the latest version of the report writer from Business Objects. Local reports guru David McAmis takes the new version for a spin.
Most developers might know Crystal Reports from versions included in Studio, Visual Studio.NET, and other popular developer IDEu2019s such as BEA Workshop, C# Builder, Delphi 2005, JBuilder, WebSphere.
In this latest installment both report and application developers have something to be excited about as there are a host of new features for report design and integration. Hereu2019s a run-down of what you can expect in this release.
What's New in Xcelsius version 4.5
Xcelsius now provides the following new components:
Candlestick and OHLC Chart components
The open-high-low-close and candlestick charts are primarily used to display stock data. Each marker corresponds to the four values, which are represented as lines attached to the marker on the OHLC chart and as colors on the candlestick chart. Open displays the opening price of the stock. High displays the highest price the stock achieved on that day. Low displays the lowest price the of the stock on that day. Close displays the closing price of the stock.
For more advantages go through the below link
http://www.crimson-consulting.com/marketing/experience/knowledge/white_papers/cognos_tco.pdf
For BI go throug hthe below link
http://www.elegantjbi.com/Why-Business-Intelligence-better/business-intelligence-advantage.htm
Regards,
Marasa.

Difference between SAP-CRM 2007 UI and previous version UI.

hi,
anyone knows the differences difference between SAP-CRM 2007 UI and previous version UI.
anykind of links or files are helpful.
regards.
raman.

Hi,
actually quite a late response and I think all the rather technically focuses comments have already been given, incl. the link to a really good slide deck, that explains all the technical architecture details on what exactly we did.
From an end user perspective some other statements on what we did:
(1) From an information architecture and visualization perspective we acted based on feedback from our customers in the last years, which led to some restructuring of the screen, e.g. moving the navigation bar from the top area of the screen (horizontal) to the left hand side --> sounds simple but users tend to have problem seeing thing at the top of the screen. We also decided to arrange the information for e.g. an account or an opportunity not in a tab oriented format. Again usability tests in CRM had shown that users often find it hard to see and understand that tabs contain additional information. We now show the details in assignment blocks below the header information in a scrollable format. Vertical scrolling is a behavior of a screen that most users know from their internet experience. Those are just two exampels of what we did in this area
(2) We also have put a large focus on well known web behaviors, like drag & drop and personalization in general, knowing that on the one hand side, no matter what standard UI we deliver, users tend to adapt it exactly based on their needs and wishes. So you will find really easy to understand personalization options everywhere in the new CRM Web Client UI. To achieve this we used lots of web 2.0 techologies that enable especially these easy interactive capabilitites.
(3) Finally, and this relates directly to the arguments mentioned in (2) we focused as well on really easy UI configuration. Again, in every customer project user interface changes are made, to adapt the SAP default to the customers needs. here we invested a lot to make the 60-80% most common UI changes done in projects as easy as possible, that even non-technical people can generally do it (like Power users).
Hope this clarifies some arguments what from the users point of view has been done and what the advantages are.
When you follow the same link as mentioned by Nadine above, you can also find a presentation UI Concept, which explains all the details rather from a users perspective.
Best regards and enjoy the new UI ..and every feedback is very much welcome, only with your feedback we can improve the solution even more.
Ingo

Difference between SAP Learning Solution & Training and Event Manag

Hi All,
Can anyone tell me the Difference between SAP Learning Solution & Training and Event Manag.
Which approach would be recommended for the Training and Event Management implementation..
Pls let me know the pro's and con's of both the approaches.
Regards
Vijay

Hi Vijay,
Training and Event Management (now called <b>Training Management (TEM)</b>, sometimes referred to as PE in SAP documentation). Employees/Learners were able to book courses and view their training history via Employee Self-Service, and supported the full suite of classroom training administration functions.
SAPs current learning software is SAPs Learning Solution (LSO). Companies still can use TEM to administer classroom-only training or they can choose to leverage LSO functionality to deliver classroom training as well as Web-based training, virtual classrooms, blended learning, and collaboration to their employees.
Training Management (TEM) serves as the foundation of SAPs Learning Solution (LSO). However, LSO includes much new functionality such as administering and delivering Web-based training, virtual classrooms, curricula, and online tests. The entire LSO consists of SAP Authoring Environment, Content Management System (CMS), Learning Management System (LMS), Learning Portal, Content Player, Offline Player, Business Intelligence (BI), and the Collaboration functionality.
Regards,
Dev

Difference between SAP BW 3.5 and SAP BI 7.0

Hi all,
actually, i work on SAP BW 3.5, now for new project need knowledge of
SAP BI 7.0
pls, help regarding the differences between SAP BW 3.5 and
SAP BI 7.0
it is little urgent.
tks in advance
- BW Professional

1. In Infosets now you can include Infocubes as well.
2. The Remodeling transaction helps you add new key figure and characteristics and handles historical data as well without much hassle. This is only for info cube.
3. The BI accelerator (for now only for infocubes) helps in reducing query run time by almost a factor of 10 - 100. This BI accl is a separate box and would cost more. Vendors for these would be HP or IBM.
4. The monitoring has been imprvoed with a new portal based cockpit. Which means you would need to have an EP guy in ur project for implementing the portal !
5. Search functionality hass improved!! You can search any object. Not like 3.5
6. Transformations are in and routines are passe! Yess, you can always revert to the old transactions too

Difference between SAP R/3 , mySap and ASAP

Hi all
Please tell what is clear Difference between SAP R/3 , mySap and ASAP
Thanks in advance

hi Naresh,
SAP R/3--
   SAP R/3 is SAP's integrated software solution for client/server and distributed open systems. SAP's R/3 is the world's most-used standard business software for client/server computing.
R/3 stands for Real Time and 3-tier architecture.
mySAP --
            In SAP's words "mySAP.com is an open collaborative business environment of personalized solutions on demand"
In our words, mySAP.com is actually a collection of three things.
a) The Marketplace is a website where buyers and sellers can register themselves, and then buy and sell from each other.
b) The Workplace is a piece of software which sits on your desktop, and allows you (after ity is setup correctly) to gain access to all of the systems you use in your company. It is, naturally, tightly integrated with both SAP and the Marketplace.
c) mySAP.com is also the umbrella name for all of SAP's internet-enabled applications.
ASAP--
      ASAP (AcceleratedSAP) is a step-by-step methodology for speeding up the implementation of an SAP R/3 system. The components of ASAP, which can be used together or individually, are called accelerators. Accelerators are based on the best practices of SAP customers from around the world and consist of a number of templates, questions, and scenarios that require user input to help the user determine the best way to implement their R/3 system. According to SAP literature, ASAP can reduce the time required to implement an R/3 system by as much as 50%.
If helpful, reward points...
Regards,
~Srikant.

Difference Between SAP ECC. 6.0(standard) and Retail

What is the difference between SAP with out Retail system and with retail system?
when its compares to Manufacture industry, how its different in Retail Industry?
This is general question and should understand before going for retail?
appreciate who gives more exposre on this
thanks
satish

Hi Satish,
The following will answer your query.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/8e/6af23b54683721e10000000a114084/content.htm
Regards,
S.V.ManiKumaar

Difference Between SAP ECC. 6.0 and 4.6c

Similar Messages

Maybe you are looking for