Difference between save and/or publish tasks

What's difference between save and/or publish tasks from project professional 2013 onto project server 2013 integrated with TFS?
For me its the same, if you exclude the integration with TFS in this scenario, that demands publishing, the tasks will be saved in project server anyway.
Its that right? Thank you.
Adauto

hi Adauto,
As a project owner when you create project plan from PWA or from Project Professional Once you save it means it will go to draft database and will be available to you in the server but you can not see it onto Project center.
Once you Click on Publish then project get publish and sits in publish database at the same time it will sync reporting database too. Once project get Publish then only all the team member who are associated with project will be able to see the project
in project center including you .
Also Users who are having either same RBS assigned to them or heigher to you will be able to see the project onto the project center.
Also All the resource will get notified and task assignment will be assigned to team members.
This is a same case for Project server with TFS integration and for normal .
Main Usability of Save is :
As a Project owner when you start Project scheduling you take time to finish it so everyday you can save it so that next day you can resume your work but in the middle of the scheduling work you wont want to show the data to your organization until- unless
you give it final touch .Once you complete it then only publish it so that it would be available to team members.
kirtesh

Similar Messages

Difference between save and publish on project professional 2013

Dear Barbara
What's difference between save and/or publish tasks from project professional 2013 onto project server 2013 integrated with TFS?
For me its the same, if you exclude the integration with TFS in this scenario, that demands publishing, the tasks will be saved in project server anyway.
Its that right? Thank you.
Adauto

hi Adauto,
As a project owner when you create project plan from PWA or from Project Professional Once you save it means it will go to draft database and will be available to you in the server but you can not see it onto Project center.
Once you Click on Publish then project get publish and sits in publish database at the same time it will sync reporting database too. Once project get Publish then only all the team member who are associated with project will be able to see the project
in project center including you .
Also Users who are having either same RBS assigned to them or heigher to you will be able to see the project onto the project center.
Also All the resource will get notified and task assignment will be assigned to team members.
This is a same case for Project server with TFS integration and normal project server without TFS integration
Main Usability of Save is :
As a Project owner when you start Project scheduling you take time to finish it so everyday you can save it so that next day you can resume your work but in the middle of the scheduling work you wont want to show the data to your organization until- unless
you give it final touch .Once you complete it then only publish it so that it would be available to team members.
kirtesh
kirtesh

Any difference between "save" and "Save..." ?

Hi there, does anyone knows the diffenrence between "save" and "Save..." ?
To me it seems to opne the same dialog.
Thanks for answering,
Andrea

Where are you seeing this? Can you post a screen shot?

What are the DIFFERENCES between Discoverer and BI Publisher?

Hi,
I was asked by my manager to look into BI Publisher and give a report. Went through and the first thing that came to my mind was Oracle Discoverer.
I don’t see any difference between the 2. Both are end user reporting tools, , with basically the same functions and options, or AM I MISSING something here???
Surprisingly, both Discoverer and BIP are part of Oracle BI EE. So why have 2 products that basically does the same thing in BI EE??
I would appreciate if anybody can enlighten me.
Thanks & Regards,
CS

Hi
Well not really. Discoverer is an end user reporting tool, providing the ability to generate high end reports, typically with a chart and drillable table. BIP is targeted at the other end of the spectrum, where Oracle Reports sits. It has some disco like capabilities but its strengths lie in generating documents e.g. invoices, POs , letters, listing reports, etc. It can also generate electronic formats, EFT, EDI, XML, etc.
In its standalone flavor, it comes as a server component, managing users, report security, scheduling, real time reports, etc.
So, it overlaps a little with Disco, it overlaps far more with Oracle Reports. It the strategic operational reporting solution going forward, its bundled with BIEE. BIEE being the Oracle BI product going forward. I dont think you'll find Disco shipping with BIEE.
Tim

Difference between SAVE and STORE TEMPORARILY in WWP1

Hi All,
I'm using WWP1 in release SAP ECC6.0 to save a newly created purchase order.
Can anybody show me the differences between the Save (CtrlS) and the Store Temporarily (ShiftCtrl+0) button?
Thanks in advance.
Regards,
Antonio

Bill,
The software is a custom, proprietary program. To me it is immaterial as to
what the program is doing and has everything to do with how AA9 saves the
file. If I open a file called AA.pdf, make changes and hit "Save", that
file is still named AA.pdf and it works in my program. If I use Windows
Explorer to rename the file to AB.pdf, that file still works in my program.
However, if I open AA.pdf, make changes and do a "Save As" AB.pdf, the file
no longer works in my program. It has nothing to do with what I name the
file, it has all to do with how I save the file in AA9.
Regards,
John Elliott

No difference between "save" and "save as" ?

Hello,
I use for first time Pages and i have a question (i did a search in the forum)
when i work in pages and open a new document then hit command+s the "save as" window pop up. That's ok, but after i work several minutes and then hit command+s Pages again ask me to "save as" document.
Is there a function like in word "ctrl+s" - and document i save without asking where to be saved?
For me it is very annoying to "save as" the document every time - in 2-3 minutes.
I check the User guide - pages 36 to 39 but did not find the answer.

Question asked and responded several times.
remember one of the statements of 'Help and Terms of Use':
+I have a question or issue+
*+how do I search for answers?+*
+It's possible that your question or issue has already been answered by other members so do a search before posting a question. On most Apple Discussions pages, you'll find a Search Discussions box in the upper right corner. Enter a search term (or terms) in the field and press Return. Your results will appear as a list of links to posts below the Search Discussions Content pane.+
+Search tips are available here:+
+http://discussions.apple.com/help/search-tips.html+
Look at:
http://discussions.apple.com/thread.jspa?messageID=9740703&#9740703
http://discussions.apple.com/thread.jspa?threadID=2064272&tstart=60
http://discussions.apple.com/thread.jspa?threadID=1869005&tstart=30
Yvan KOENIG (VALLAURIS, France.) vendredi 21 août 2009 10:49:35

What is the difference between save and archive?

unable to find thread or answer to this question. "Save" vs. "Archive" obviously different from the file size but ho ware they different? thanks you.

never mind, figured it out, the hard way, when I deleted some files.

Difference between .swf and html publishing

Hi,
I am creating a flash player to stream my .flv files, as I am
testing my results, I put my .swf and html files on my web server
and then test respective URL paths: For example:
http://mywebserver.com/video/file.html
http://mywebserver.com/video/file.swf
how come these file vary so much in size? when I call
http://mywebserver.com/video/file.html
on my browser; my player is very small. But, when I call
http://mywebserver.com/video/file.swf
I see the actual size.
Thanks,

Hi,
Open ur html with DW or notepad. Find the <embed src="
tag.
Then replace the width and height of the swf as u want.
When you tries to open the file.swf, it will hold the browser
width and height.
Regards,
Sankarapandian T.

What is the difference between pause and save in Hyper-V?

hi,
What is the difference between pause and save in Hyper-V?
What are the benefits of using each function?
Thanks

WHen you save VM, Hyper-V saves VM state to disk and frees all memory and CPU resources used by VM. When you pause a VM, Hyper-V saves VM cpu state in memory, and then stops VM's cpu processes without releasing its memory. Since no disk operations are involved,
pausing and resuming can be done much faster than saving and restoring a VM.
Gleb.

What Is The Difference Between Save As Self-Contained Movie and Exporting

What Is The Difference Between Save As Self-Contained Movie and Exporting a Video as a Quicktime File

Save As places the file inside a .mov container. No re-encoding.
Your still have the option to save this file as "self-contained" (all the parts travel with the file) or "reference" (small file sized movie that merely "points" to the movie parts).
A reference movie can't play if the source files can't be found. If they are moved or deleted the reference movie will fail and it can't be re-created.
Exporting is done to convert one QuickTime format to another. Typically you do this with a high quality source file. Exporting previously compressed files is a bad idea that leads to unpredictable results.
QuickTime doesn't open WMP formats without third party software help (Flip4Mac is one). You can't convert (export) WMP formats without paying extra fees to upgrade their software.

FV70 what is the difference between Park and Save as completed?

HI,
Can anyone explain, what is the differences between Park and Save as completed in t-code FV70?
in FBV0 post park document, I still can post both document?
Thanks

Hi,
The main difference between park and save as completed is that in "Save as Completed", system do some checks as it do in posting the ocuments, like:-
(1) Balance should be zero.
(2) All lines should have been filled with the required data.
(3) There should be at least two lines in the document.
Regards,
Gaurav

Difference between resolution and publishing preset

Hi there
I'm not sure about the difference between "resolution" and "preset"?
If I made one project with a resolution of 1024 x 672 and another in 1024 x 576, and they were both published them under the 'YouTube widescreen HD' preset, would there be a difference?

hi,
hope this will help u.
broadcasting:
help.sap.com/saphelp_nw04/helpdata/en/71/52fa40fe14f423e10000000a155106/content.htm
publishing:
help.sap.com/saphelp_nw04/helpdata/en/4b/b41540bf1af72ee10000000a1550b0/content.htm -

What is the difference between SWF and F4V in the context of Streaming or progressive Download?

Hello everybody,
I am absolutely a beginner in working with Captivate and furthermore my technological know how is not that good.
So, I have problems to understand if the export formats SWF and F4V are both capable to be published in the Internet as streaming video and as progressive Download? Well so, I do not really understand the difference between streaming and progessive download either?
Furthermore I was asking myself if this issue depends on how I imported flash videos (there are these two options) in my Captivate project during the production phase?
I would be very thankful for some helping information!
Greetings,
Mareike the beginner

Welcome to our community
I'm not certain I fully understand the differences myself, but will toss out what I believe to be true about the formats. Hopefully, if I'm incorrect in my bellief, someone with more definitive knowledge will chime in.
It was explained to me a couple of years back and is my understanding that "streaming" only applies to a video based format such as F4V, FLV and it doesn't apply to SWF. With SWF, you may specify a preload value. So when the SWF transmits from the web server to the PC, a certain percentage has to be received before play begins. But that's not streaming. It's preloading.
For streaming to occur, the web server establishes a communication channel between the server and the destination PC. This channel is monitored to see what speed is in use. Only enough information is then transmitted to be comfortable at that speed. If the speed improves during the connection, the server serves data at a faster rate. If the connection degrades, the information transmitted is also scaled back so as to accommodate the lower speed.
With SWF, after it has all been downloaded, a savvy user is able to poke around in their temporary internet files and save the SWF for play later. With streaming, this isn't possible because as the stream is viewed, it evaporates from memory.
Seriously hoping others will chime in here to confirm or deny this.
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

MAIN DIFFERENCES BETWEEN PARALLEL AND SEQUENTAIL PRCESSING???

HI PALS,
I WANT THE COMPLETE DIFFERENCES BETWEEN PARALLEL AND SEQUENTIAL PROCESSING!
IN THE CONTEXT OF RFC.

Hi
Parallel Processing
To achieve a balanced distribution of the system load, you can use destination additions to execute function modules in parallel tasks in any application server or in a predefined application server group of an SAP system.
Parallel-processing is implemented with a special variant of asynchonous RFC. Itu2019s important that you use only the correct variant for your own parallel processing applications: the CALL FUNCTION STARTING NEW TASK DESTINATION IN GROUP keyword. Using other variants of asynchronous RFC circumvents the built-in safeguards in the correct keyword, and can bring your system to its knees
Details are discussed in the following subsections:
·        Prerequisites for Parallel Processing
·        Function Modules and ABAP Keywords for Parallel Processing
·        Managing Resources in Parallel Processing
Prerequisites for Parallel Processing
Before you implement parallel processing, make sure that your application and your SAP system meet these requirements:
·        Logically-independent units of work:
The data processing task that is to be carried out in parallel must be logically independent of other instances of the task. That is, the task can be carried out without reference to other records from the same data set that are also being processed in parallel, and the task is not dependent upon the results of others of the parallel operations. For example, parallel processing is not suitable for data that must be sequentially processed or in which the processing of one data item is dependent upon the processing of another item of the data.
By definition, there is no guarantee that data will be processed in a particular order in parallel processing or that a particular result will be available at a given point in processing.
·        ABAP requirements:
¡        The function module that you call must be marked as externally callable. This attribute is specified in the Remote function call supported field in the function module definition (transaction SE37).
¡        The called function module may not include a function call to the destination u201CBACK.u201D
¡        The calling program should not change to a new internal session after making an asynchronous RFC call. That is, you should not use SUBMIT or CALL TRANSACTION in such a report after using CALL FUNCTION STARTING NEW TASK.
¡        You cannot use the CALL FUNCTION STARTING NEW TASK DESTINATION IN GROUP keyword to start external programs.
·        System resources:
In order to process tasks from parallel jobs, a server in your SAP system must have at least 3 dialog work processes. It must also meet the workload criteria of the parallel processing system: Dispatcher queue less than 10% full, at least one dialog work process free for processing tasks from the parallel job.
Function Modules and ABAP Keywords for Parallel Processing
You can implement parallel processing in your applications by using the following function modules and ABAP keywords:
·        SPBT_INITIALIZE: Optional function module.
Use to determine the availability of resources for parallel processing.
You can do the following:
¡        check that the parallel processing group that you have specified is correct.
¡        find out how many work processes are available so that you can more efficiently size the packets of data that are to be processed in your data.
·        CALL FUNCTION Remotefunction STARTING NEW TASK Taskname DESTINATION IN GROUP:
With this ABAP statement, you are telling the SAP system to process function module calls in parallel. Typically, youu2019ll place this keyword in a loop in which you divide up the data that is to be processed into work packets. You can pass the data that is to be processed in the form of an internal table (EXPORT, TABLE arguments). The keyword implements parallel processing by dispatching asynchronous RFC calls to the servers that are available in the RFC server group specified for the processing.
Note that your RFC calls with CALL FUNCTION are processed in work processes of type DIALOG. The DIALOG limit on processing of one dialog step (by default 300 seconds, system profile parameter rdisp/max_wprun_time) applies to these RFC calls. Keep this limit in mind when you divide up data for parallel processing calls.
·        SPBT_GET_PP_DESTINATION: Optional function module.
Call immediately after the CALL FUNCTION keyword to get the name of the server on which the parallel processing task will be run.
·        SPBT_DO_NOT_USE_SERVER: Optional function module.
Excludes a particular server from further use for processing parallel processing tasks. Use in conjunction with SPBT_GET_PP_DESTINATION if you determine that a particular server is not available for parallel processing (for example, COMMUNICATION FAILURE exception if a server becomes unavailable).
·        WAIT: ABAP keyword
WAIT UNTIL
Required if you wish to wait for all of the asynchronous parallel tasks created with CALL FUNCTION to return. This is normally a requirement for orderly background processing. May be used only if the CALL FUNCTION includes the PERFORMING ON RETURN addition.
·        RECEIVE: ABAP keyword
RECEIVE RESULTS FROM FUNCTION Remotefunction
Required if you wish to receive the results of the processing of an asynchronous RFC. RECEIVE retrieves IMPORT and TABLE parameters as well as messages and return codes.
Managing Resources in Parallel Processing
You use the following destination additions to perform parallel execution of function modules (asynchronous calls) in the SAP system:
In a predefined group of application servers:
CALL FUNCTION Remotefunction STARTING NEW TASK Taskname
DESTINATION IN GROUP Groupname
In all currently available and active application servers:
CALL FUNCTION Remotefunction STARTING NEW TASK Taskname
DESTINATION IN GROUP DEFAULT
Sequential Processing
In the following cases, the system chooses sequential (non-parallel) processing:
●      In table RSADMIN, entry QUERY_MAX_WP_DIAG has value (column value) 1.
●      The entire query consists of one sub-access only.
●      The query is running in a batch process.
●      The query was started from the query monitor (transaction RSRT) using various debug options (for example, SQL query display, execution plan display). See, Dividing a MultiProvider Query into Sub-Queries.
●      The query requests non-cumulative key figures.
●      Insufficient dialog processes are available when the query is executed. These are required for parallel processing.
●      The query is configured for non-parallel processing.
●      You want to save the result of the query in a file or a table.
In Release SAP NetWeaver 7.0, the system can efficiently manage the large intermediate results produced by parallel processing. In previous releases, the system terminated when it reached a particular intermediate result size and proceeded to read data sequentially. This is no longer the case. Therefore, the RSADMIN parameter that was used in previous releases for reading a MultiProvider sequentially is no longer used.
Reward If Helpfull,
Naresh

Difference between u2018Workbenchu2019 and u2018Customizeu2019 Transport request.

Hi Experts,
What is the difference between u2018Workbenchu2019 and u2018Customizeu2019 Transport request.
Thanks

Workbench Requests
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
Customizing requests
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually

Difference between save and/or publish tasks

Similar Messages

Maybe you are looking for