Difference between scom 2012 sp1 and SCOM 2012 R2

what is the difference between scom 2012 sp1 and SCOM 2012 R2 ?

What's New in System Center 2012 R2 Operations Manager:
https://technet.microsoft.com/en-us/library/dn249700.aspx

Similar Messages

Are there any differences between Server 2012 and Server 2012 R2 that might impact TFS or SQL server required for TFS?

Hi,
In the interest of just getting started and learning the basics of setting up TFS, I previously setup an IDE using a large workstation running Windows 8. I set up the required servers for TFS using VM's through Hyper-V. I am now transferring
everything to a new and separate physical server.
My question stems from a problem I had when I originally setup the TFS system the 1st time. I couldn't get SQL server to work using the Server 2012 R2 download from the subscription center. When I used Server 2012, it worked, so I proceeded that
way just to get going.
So now I'm setting things up anew on a new physical box, I want to ask up front, is there some difference in the R2 version that causes problems with either TFS or SQL server, or was there likely some oversight on my part when I did things the 1st time?
As an addendum to my question, I always assumed R2 merely means the Server software has progressed to a refined state and is ready for wide distribution and easy setup. I assumed that there are no differences between the Standard version and the R2
version. Is that understanding correct?
Thanks.

Hi Daniel,
Thanks for your response. That's a great link. I don't recall seeing a page that is so clear and easy to read back when I was doing this the 1st time, but I probably just missed it. That helps.
I am/was using TFS2013 and VS2013. As I recall, my problem was getting SQL Server to work, but I thought asking this question on this forum was wiser because I figured everyone using TFS would be well familiar with these issues.
At any rate, it seems as though TFS2013 is fine with Server 2012 standard or R2.
I was using SQL Server 2012, and it also seems as though it works on R2:
https://msdn.microsoft.com/en-us/library/ms143506(v=sql.110).aspx
Anyway, thanks for your support. I'll be trying this again and we'll see.

What is the difference between MacBook pro 2011 and 2012

What is the difference between MacBook pro 2011 and 2012

understanding that at the time of the question, there has not been any Macbook Pro 2012, now it is later and there is.
The difference is:
-CPU being used (2011 models: Sandy Bridge, 2012 models: Ivy Bridge)
-Graphics (2011: intel 3000 + on 15"/17" ATI, 2012: intel 4000 + on 5"/17" nvidia Geforce 650M)
-USB (2011: USB2.0 only, 2012: USB3.0)
-Bluetooth (2011. 2.1 + EDR, 2012: 4.0)
Ivy Bridge CPUs are smaller and are a little bit more energy-efficient.
Other than that, currently the devices are not much different in respect to performance (Apple's graphics driver performance is known to increase during upgrades, though, so the performance gap may widen up)

HT3696 How to know if your mac is using the latest Haswell architecture processor or not? and how to know the difference between the new imac and the 2012/13 imac?

How to know if your mac is using the latest Haswell architecture processor or not? and how to know the difference between the new imac and the 2012/13 imac?

Sorry to reopen an old post, but I've just purchased a 2nd hand late-2013 iMac (or so thats what the seller said).
I'm always sceptical though, and just wanted to know if there is a way to check if my iMac is indeed the late-2013 model that included Haswell?
I've attached screenshots of the About This Mac section hoping it may help shed some light.
Thank you in advance for your help!
PS - I can't compare to the iMac specs link you posted above because its now showing the late-2014 models.
<Image Edited by Host to Remove Serial Number>

Difference between cancel_flag IS NULL and cancel_flag ='N'

Hi ,
Please clarify Difference between cancel_flag IS NULL and cancel_flag ='N' in PO Headers .
Because from front end cancel check box is unchecked in abobe both the cases . We can see cancel check box status only in Help>Diagnostics>Examine .
Thanks in Advance
Kiran

Hi Kiran,
The is no difference between cancel_flag with 'null' and 'N' but cancel field contain Null if it is generated through auto create and it contains 'N' if Purchase order raised without PR .
I hope you understand.
Regards,
Sravani.M
Edited by: 855855 on Nov 9, 2012 5:49 AM

Difference between Wsus 3.0 and Wsus 4.0

Hi all,
I would like to know what are differences between Wsus 3.0 and Wsus 4.0.
I have already notice that for Local Publishing, the method IPublisher.PublishPackage(sourcePath,
additionalSourcePath, packageDirectoryName), totally ignore the "additionalSourcePath" parameter.
Are there any documentation or web site where I can find differences between Wsus 3.0 and 4.0 ?
Thanks.
David COURTEL
IT Technician
Wsus Third-Party Softwares Publishing :
http://wsuspackagepublisher.codeplex.com

I would like to know what are differences between Wsus 3.0 and Wsus 4.0.
The differences between WSUS v3 and WSUS v6 (please note the correct version number) are documented ... somewhere ... but at the moment I can't find them. (Presumably it would be in the Release Notes for Win2012, but that idea is a bust.)
In short, these are the notable distinctions:
WSUS v6 is compiled with the .NET Framework v4
WSUS v6 provides an extended interface for management via PowerShell
WSUS v6 supports SHA256 hashes (which were implemented by the WUAgent v7.8 and rolled back to the WUAgent v7.6 in KB2720211 and WSUS v3.2 in KB2734608)
I have already notice that for Local Publishing, the method IPublisher.PublishPackage(sourcePath, additionalSourcePath, packageDirectoryName), totally ignore the "additionalSourcePath" parameter.
Changes to the API should be reflected in the
SDK.
Also worth of note.. publishing TO a WSUS v6 server must be performed from a Windows Server 2012 system or a Windows 8 system with RSAT. Publishing to a WSUS v6 server from a WSUS v3.2 console cannot be done due to internal dependencies in the Local
Publishing API on the build number of the console and server involved in the publishing process.
Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
SolarWinds Head Geek
Microsoft MVP - Software Distribution (2005-2013)
My MVP Profile: http://mvp.support.microsoft.com/profile/Lawrence.Garvin
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

What is the difference between the new ipad and ipad with retina display?

what is the difference between the new ipad and ipad with retina display???

This compares the two new iPads with the previous Retina iPad:
http://www.engadget.com/2012/10/23/ipad-mini-vs-2012-ipad-whats-different/
Regards.

Difference between the new iPad and iPad with ritna

What is the difference between the new iPad and iPad with ritna ?

This compares the two new iPads with the previous Retina iPad:
http://www.engadget.com/2012/10/23/ipad-mini-vs-2012-ipad-whats-different/
Regards.

Difference between pool pair relationship and Backup registrar configuration

Hi,
I would like to difference between pool pair relationship and Backup registrar configuration?
Are both concepts are reffering same for DR site resiliency in Lync 2013?
Thanks

Backup Registrar works the same in Lync 2013 as it did in Lync 2010. This allows for registration in the event the primary registrar is unavailable. Pool Pairing is built on top of the Backup Registrar functionality.
Take a look at the following:
Backup Registrar Functionality in Lync Server 2013: http://blogs.technet.com/b/dodeitte/archive/2012/08/08/backup-registrar-functionality-in-lync-server-2013.aspx
Lync Paired Pools - Why it Matters: http://blogs.perficient.com/microsoft/2012/12/paired-pools-why-it-matters/
Backup Registrar relationships in Lync Server 2013: http://technet.microsoft.com/en-us/library/jj205033.aspx
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

Difference between Installing an application and Deploying and application

What is the Difference between Installing an application and Deploying and application from the console?
When deploying and app from console - > Click on deployments -> Install -> choose app path, next, next,.. Finish.
Then it will be in prepared state. Once you activate changes, the app deployed will be in activate state. Some times even if you activate changes, it will be in prepared state. then you need to start the app which then comes to activate state.
From above, which part is called Installing an app? Which part is called deploying an app?
Or Are Install and Deploy both mean same?
Edited by: user734247 on Apr 26, 2012 3:16 PM

Installation is generally referred to making an application's physical file or directory known/accessible to WebLogic Server by configuring through the "New" option in the "Deployments" screen and targeting the servers. Installation of an application will put the status of the application in "prepared" state.
Start is the next action expected so that the application's state transforms into "ACTIVE" by initializing the application and loading the necessary classes and creating the necessary objects to run the application.
The above two steps together are referred to as "Deployment of an application"
Bottomline: In short, "Deploying an application" includes "Installation of the application" AND "Activation/Start of the application"
Arun

Differences between app copy utility and LCM

Hi all
Our version of HFM now is 11.1.1.3.
we need to update it from 11.1.1.3 to 11.1.2.1.
First of all we update HFM in one Server ,and then we need to migrate it from one server to another .
Now what i want to know is the difference between app copy utility and LCM .
the following is i know :
Financial Management data migration is not supported in Lifecycle Management,so why users use lcm,we just need use app copy utility can solve all the Migration problems !
who can tell me that does "app copy utility" have any shortcomings ??
thanks

actually the copy utility used for all the hfm applications are moved to new server.
for using lcm we can migrate the shared services users ,groups , icp, journal,etc
for my preference go for LCM...
Edited by: Kimi on Jan 31, 2012 6:17 PM

Difference between Business Objects Explorer and Polestar

Hi all,
can anyone help me out with the main differences between Business Objects Explorer and Polestar.
thanks & regards
immanuel.

Explorer is the new product name for Polestar. There have been a few versions of Explorer released since it was called Polestar, but you can find the latest 'whats new' doc here which lists the latest additions:
http://help.sap.com/businessobject/product_guides/boexplXI32/en/exp32_whats-new_en.pdf
For one, Explorer now comes in two editions... Standard and Accelerated. The Explorer Standard edition allows reporting off of Universes, just as the original Polestar product did. Explorer Accelerated allows reporting off of SAP BWA indexes as well as Business Objects universes. Both versions now allow uploading of excel files to report off of. You can export an Information Space to a Webi doc or Excel file. Users can now save favorite links to an Information Space. Sorting has been improved as well as graphing functions and overall display. You'll have to install the latest build of Explorer - "Explorer 3.2 SP1" and compare. I don't know of a document or matrix that compares Polestar to Explorer. The two are basically the same product with a number of enhancements added to the Explorer line.

The difference between VGA, DVI-D and ADC?

Hi.
The difference between VGA, DVI-D and ADC and which should be used with a T244 widescreen monitor into a Quicksilver G4 with a GeForce2 MX nVIDIA (0x10de) card. What's a good upgrade card if the above is not good enough?
Thank you for your input.
Walter

Look at this link http://en.wikipedia.org/wiki/DigitalVisualInterface
 Cheers, Tom

The difference between AIR-ANT5135D-R and AIR-ANT5135DB-R

Hi,
Anyone know what is the difference between AIR-ANT5135D-R and AIR-ANT5135DB-R ?
From the dynamic configuration tools for 1252 and 1242, AIR-ANT2422DB-R is inside one of the antenna option.
However, I can't find it in the "Cisco Aironet Antennas and Accessories Reference Guide"
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/product_data_sheet09186a008008883b.html
Inside the document there is only AIR-ANT5135D-R.
likewise for the 2.4 GHz, AIR-ANT2422DB-R is inside the dynamic configuration tools and not inside "Cisco Aironet Antennas and Accessories Reference Guide"
Any help would be appreciated
Thanks,
Richard

Found the difference, AIR-ANT5135DB-R and AIR-ANT2422DB-R are non-articulating antennas.
Thanks!
Richard

The difference between Telepresence Content Server and MSE 3500

Good day! Could someone explain me what's the difference between Telepresence Content Server and MSE 3500? Why do I need to obtain two these devices for sorting out my tasks? I want to understand gist of the first and the second devices.

In addition to what Jonathan posted above, here is a Capture Transform Share Solution Guide that goes over a little bit of what the TCS and MXE are and some possible deployment scenarios.
In short, TCS is used to record video conferences or lectures that can be streamed on demand or live using various streaming or distribution methods. One such distribution method is using the MXE 3500 to ingest the recordings from TCS and convert them to different media types and add in-video content such as logos etc. However, from the MXE, you can't send the video back to the TCS for viewing, you'd need to send that off to another viewing portal such as Show and Share.

Difference between scom 2012 sp1 and SCOM 2012 R2

Similar Messages

Maybe you are looking for