Difference between Search Helps and Match Codes?

Serch help
Search Helps
The input help (F4 help) is a standard function of the R/3 System. The user can display the list of all possible input values for a screen field with the input help. The possible input values can be enhanced with further information. This is meaningful especially when the field requires the input of a formal key.
Standard Input Help Process
A user calls an input help with the following steps (some steps can be omitted, depending on the definition of the input help):
The user starts the input help to display the possible input values for a field (search field) in a screen template.
The system offers the user a number of possible search paths. The user selects one of these search paths. Each search path offers a number of restrictions to limit the number of possible input values. These values are offered in a Dialog box for value restriction when the search path is selected.
The user enters restrictions if required and then starts the search.
The system determines the values that satisfy the entered restrictions (hits) and displays them as a list (hit list).
The user selects the most suitable line from the hit list by double-clicking.
The value of the search field is returned to the screen template (possibly together with other values).
Steps 2 and 3 are omitted if there is only a single search path available. In this case the dialog box for the value selection is offered immediately. You can also output the hit list directly after starting the input help. Steps 2 to 4 are omitted in this case.
Function of a Search Help
This standard process can be completely defined by creating a search help in the ABAP Dictionary. This search help only has to be assigned to the screen fields in which they should be available (see Attaching Search Helps to Screen Fields).
There are two types of search help:
Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
See also:
Example for Search Helps
Creating Elementary Search Helps
Creating Collective Search Helps
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_46c/helpdata/en/cf/21ee2b446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm
Match code
Match code is nothing but the Search help in Higher versions
It is same way from SE11 you have to create.
so from SE11 create it and use it.
Matchcode objects are being replaced by search helps. This is good as search helps are easy to create. However, it has caused some confusion on how best to add search helps to a selection field.
The trick that I found is to keep your newly created search helps to a 4-character name. The Matchcode object name has this old 4-character limit. This trick is not documented anywhere in the system but it has been a great time saver for me. You can expand this concept by finding existing SAP search helps that are more than 4-characters, copy them to a 4-character name and presto, you have a new matchcode object available for use
Check this thread to get detailed info
Match Code Objects
Match code
match code
match code
Match code
http://help.sap.com/saphelp_40b/helpdata/en/cf/21ef46446011d189700000e8322d00/content.htm
Rewards if useful.................
Minal
http://web.mit.edu/sapr3/docs/webdocs/dontindex/pdf/mcqc.pdf

Similar Messages

Search help and Match code oject

How to create the search help in version 5.0 and 6.0 ? what is elementary search help,collective search help? what is the use of these search helps? where we use elementary and collective searsc helps? what is the difference between searc help and match code object? how to use in reports?where we use search help and F4IF_INT_TABLE_VALUE_REQUEST function module? what is the diffference between them?

Hi Rk,
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
See the links:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
Thanks,
Reward If Helpful.

Diff b/n search help and match code

hi all,
can i know the differece between search help and match code object in terms of functionality?
is there possibility to provide matchcode object for select-options?if yes how can we provide?

<b>same thread again.</b>
hi,
Matchcodes were replaced with Search Helps starting with Release 4.0. Please use search helps to assign an input help to a field.
Existing matchcodes were automatically converted to search helps. A matchcode object is hereby converted to a collective search help with the same name. Each matchcode ID of the matchcode object is converted into an elementary search help with the same name and assigned to the collective search help created from the matchcode object.
A matchcode is a means of finding data records stored in the system. The matchcode is defined in the ABAP Dictionary in two steps:
You first define the relevant tables and fields for the search in a matchcode object. A matchcode object describes the set of all possible search paths for a search string.
You then create one or more matchcode IDs for a matchcode object. A matchcode ID describes a special search path for a search string. The matchcode ID defines the fields or field combinations to be used in the search.
Search Help
Use
With this function you can search for objects, thereby defining and linking different selection conditions for the search help.
Prerequisites
You can call this function by:
· Selecting Object ® Search... () in the main menu bar of the Integration Builder
· Placing the cursor on a software component version and selecting Search... () in the context menu (only in the Integration Repository)
In this case the software component version is defined as the search criteria.
Features
Defining the Object Type
You can select the object type in a dropdown list in field Object Type.
In the design (Integration Repository) you can
· Select an object type (for example Message Interface)
· Select a cross-object category (for example Interface Objects)
In the configuration (Integration Directory) you can select types Values Mapping Group and schema in addition to the individual object types.
CHECK THIS LINK TO CREATE A SEARCH HELP.
http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_basic.htm
CHECK THIS LINK TO CREATE A MATCHCODE OBJECT
http://searchsap.techtarget.com/tip/1,289483,sid21_gci553386,00.html
more details...
Here is the code to attach a search help to a select-options
SELECT-OPTIONS S_MATNR FOR MARA-MATNR MATCHCODE OBJECT MAT1_A.
Rgds
Anver

Search help and match code

we have a search help created called z_zvalue(matchcode). we created it for va42. when we were search the contract number using the z_zvalue, able to see the the contracct number, but the contract number is not passing to the va42 contract field. anybody can tell me how can I pass teh value to the vbeln filed in va42. I don't have that much idea about match code

hi
can u please explain me the problem clearly and the solution also.
thanks in advance.

Search difference between Search Folders and search on OWA

Sometimes when I Search the Inbox folder on OWA, the search will not return all the emails with a subject line value. However, I also have a Search Folder set up to look for the same subject line value and it does return all the emails.
After a few days it usually fixes itself.
What is the difference between the search using OWA and the search using a Search Folder?
For the OWA search I specify to only search the Inbox and to only search the Subject line.

Hi,
Yes, there are some different results when searching items in OWA and Outlook Cached mode.
When users are using Outlook Cached mode, Outlook uses
Windows Search, a component built-in in Windows 7 and Windows Vista. Windows Search performs content indexing and provides search functionality to Outlook. Interfacing with a local content indexing and search service provides Outlook users running
in Cached Exchange Mode a more efficient way to search their mailbox. For details about Windows Search, see
Windows Search.
When using OWA, the Exchange Search is used. Generally, Search results are limited to the first 100 matches found in OWA. For more information about Exchange search, we can refer to Exchange Search Client part in :
http://technet.microsoft.com/en-us/library/bb232132(v=exchg.141).aspx#ESC
If you have any feedback for TechNet Subscriber Support, contact
[email protected]
Thanks,
Winnie Liang
TechNet Community Support

Differnces between Search Help & Match Codes

Hi,
what is the Differences between Search Help & Match Codes ? which is goof to use ?

Matchcodes were replaced with Search Helps starting with Release 4.0. Please use search helps to assign an input help to a field.
Existing matchcodes were automatically converted to search helps. A matchcode object is hereby converted to a collective search help with the same name. Each matchcode ID of the matchcode object is converted into an elementary search help with the same name and assigned to the collective search help created from the matchcode object.
A matchcode is a means of finding data records stored in the system. The matchcode is defined in the ABAP Dictionary in two steps:
You first define the relevant tables and fields for the search in a matchcode object. A matchcode object describes the set of all possible search paths for a search string.
You then create one or more matchcode IDs for a matchcode object. A matchcode ID describes a special search path for a search string. The matchcode ID defines the fields or field combinations to be used in the search.
Search Help
Use
With this function you can search for objects, thereby defining and linking different selection conditions for the search help.
Prerequisites
You can call this function by:
· Selecting Object ® Search... () in the main menu bar of the Integration Builder
· Placing the cursor on a software component version and selecting Search... () in the context menu (only in the Integration Repository)
In this case the software component version is defined as the search criteria.
Features
Defining the Object Type
You can select the object type in a dropdown list in field Object Type.
In the design (Integration Repository) you can
· Select an object type (for example Message Interface)
· Select a cross-object category (for example Interface Objects)
In the configuration (Integration Directory) you can select types Values Mapping Group and schema in addition to the individual object types.
CHECK THIS LINK TO CREATE A SEARCH HELP.
http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_basic.htm
CHECK THIS LINK TO CREATE A MATCHCODE OBJECT
http://searchsap.techtarget.com/tip/1,289483,sid21_gci553386,00.html
more details...

A question about search help and input help,PLZ take a look at it.

hi everyone,
i want to know the difference between search hlep and inpu help
can anyone tell me about that?
thanks

HI
BOTH ARE SAME
you can define F4 help in 2 ways
in SE11 or in the report program
IN SE11
Attaching a search help to a table field
Choose the field name, click on search help tab and
provide the name of the search help.
A search help is attached to a field of a table or structure in the maintenance transaction for this table/structure, analogously to attaching to a table. You must assign the interface parameters of the search help to any fields of the table/structure. The search field must be assigned to an EXPORT parameter of the search help at this time.
Attach the search help to the table field
The search help ZSTRAVELAG_NAME is therefore directly attached to the field AGENCYNUM of table ZSTRAVELAG.
Attaching a search help to a data element
Provide the search help name and the parameter name
under the further characteristics tab of the data element.
If the input help of a field is defined by its data element, no further screen fields can be used in the input help.
Also note that the input F4 help would be available wherever the data element is used.
Attaching a search help to a screen element
A search help can be directly assigned to a screen field in two ways.
The name of the search help must be entered in the Screen Painter in the Attributes for the field in the field Search help.
The name of the search help can be defined for selection screens in ABAP reports in the PARAMETERS or SELECT-OPTIONS statement directly following the supplement MATCHCODE OBJECT.
However, input help is only available for this particular screen.
in REPORT PROGRAM
in this way we declare in report program
TYPES : BEGIN OF ST_OBJID_SH,
OTYPE TYPE HRP1000-OTYPE,
OBJID TYPE HRP1000-OBJID,
END OF ST_OBJID_SH.
DATA : IT_OBJID_SH TYPE STANDARD TABLE OF ST_OBJID_SH.
DATA : WA_OBJID_SH TYPE ST_OBJID_SH.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
*SELECT-OPTIONS : S_OTYPE FOR HRP1001-OTYPE NO INTERVALS .
SELECT-OPTIONS : S_OBJID FOR HRP1001-OBJID NO INTERVALS .
SELECT-OPTIONS : DATE FOR SY-DATUM NO-EXTENSION OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_OBJID-LOW.
IF S_OBJID IS NOT INITIAL.
SELECT OTYPE OBJID FROM HRP1000
INTO TABLE IT_OBJID_SH
WHERE OTYPE = 'D'.
IF SY-SUBRC EQ 0.
SEARCH HELP FOR QUALIFICATION.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'OBJID'
PVALKEY = ' '
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'S_OBJID'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
VALUE_TAB = IT_OBJID_SH
FIELD_TAB =
RETURN_TAB = RETURN_TAB
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
Check this out
http://www.sap-img.com/abap/value-request-for-parameter.htm
******************************8
sample program
report zrich_0001 .
data: begin of ihelp occurs 0,
field type char10,
ftext type char50,
end of ihelp.
data: a_field(20) type c.
select-options s_field for a_field.
initialization.
ihelp-field = 'A'.
ihelp-ftext = 'Description A'.
append ihelp.
ihelp-field = 'B'.
ihelp-ftext = 'Description B'.
append ihelp.
ihelp-field = 'C'.
ihelp-ftext = 'Description C'.
append ihelp.
at selection-screen on value-request for s_field-low.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = 'FIELD'
dynprofield = 'S_FIELD'
dynpprog = sy-cprog
dynpnr = sy-dynnr
value_org = 'S'
tables
value_tab = ihelp.
start-of-selection.
one more program....
REPORT ZHELP .
TABLES : MARA.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_MATNR(10) TYPE C.
SELECTION-SCREEN END OF BLOCK B1.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR TYPE MATNR,
END OF ITAB.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_MATNR.
SELECT MATNR
FROM MARA
INTO TABLE ITAB
UP TO 10 ROWS.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'MATERIAL NUMBER'
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'P_MATNR'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = ITAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
Create it from SE11.
enter search help
and create elementary
enter description and below Table name
and the fields
see the doc
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm

Hi, difference between database view and elementary search help

hi
pl. can any one tell me the difference between
database view and elementary search help,
and help view and elementary search help,
and database view and help view.
in the output i do not see any difference.
thanx.
rocky robo

HI
An entire table can be included in a database view. In this case all the fields of the included table will become fields of the view (whereby you can explicitly exclude certain fields). If new fields are included in the table or existing fields are deleted, the view is automatically adjusted to this change.
Database view:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/36/74c0358373003ee10000009b38f839/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/36/74c0358373003ee10000009b38f839/frameset.htm</a>
Elementary search help:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/8b/415d363640933fe10000009b38f839/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/8b/415d363640933fe10000009b38f839/frameset.htm</a>
Help view:
Help views are used if a view with an outer join is needed as selection method in a search help.
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/42/81c1351181b73fe10000009b38f839/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/42/81c1351181b73fe10000009b38f839/frameset.htm</a>
Regards,
Gunasree

Searching for differences between oracle 8i and 9i

hello
can somebody help me please. i am searching for the difference between oracle 8i and 9i, and specially the differences in the DDL between 8i and 9i. may someone can help me!
thanks
Message was edited by:
Da Rookee

i need some expamples to show the difference....for
example how it is written in 8i without joins and inNow you are talking about DML not DDL
For some examples showing the differences between the "traditional" Oracle join syntax and the ANSI join syntax see this article on oracle-base
http://www.oracle-base.com/articles/9i/ANSIISOSQLSupport.php

Help in Match-code for field SEARK (Search Term)

Friends, in my aplication was necessary insert the match-code for SEARK field.
I use the function module RH_OBJID_REQUEST in the form OPEN_BOX2 at the event AT SELECTION-SCREEN ON VALUE-REQUEST FOR so_requi-low.
When I use this match-code and select the 4 itens and clique the OK button, only the last item appears in the field.
Anyone else had this problem?
Can someone help me?
Thanks for listening.
Below is the code:
select-options:
so_requi    for pm0d1-seark no intervals .
AT SELECTION-SCREEN ON VALUE-REQUEST FOR so_requi-low.
PERFORM open_box2 CHANGING so_requi-low.
form OPEN_BOX2 changing p_so_requi_high.
Variáveis
DATA: h_plvar LIKE p1000-plvar,
        h_otype LIKE p1000-otype,
        h_objid LIKE objec-realo,
        h_begda TYPE begda,
        h_endda TYPE endda,
        p_subty TYPE plog-subty.
tables
DATA: p_change_profq LIKE hrpe_profq OCCURS 0 WITH HEADER LINE.
preenche as variantes para os parâmetros da função
h_plvar = PCHPLVAR.
h_otype = 'Q'.
h_begda = sy-datum.
h_endda = '99991231'.
DATA: sel_objects LIKE objec OCCURS 0 WITH HEADER LINE.
popup with qualifications catalogue
CALL FUNCTION 'RH_OBJID_REQUEST'
       EXPORTING
            plvar                 = h_plvar
            otype                 = 'Q'
            seark                 = '*'
            seark_begda           = h_begda
            seark_endda           = h_endda
            set_mode              = 'X' "multiple choice
       TABLES
            sel_objects           = sel_objects
       EXCEPTIONS
            cancelled             = 1
            wrong_condition       = 2
            nothing_found         = 3
            illegal_mode          = 4
            internal_error        = 5
            OTHERS                = 6.
Captura os dados selecionados e passa para o select-options
   free: so_requi.
   if sy-subrc = 0 .
     loop at sel_objects.
       clear so_requi.
       so_requi-sign    = 'I'.
       so_requi-option = 'EQ'.
       so_requi-low     = sel_objects-objid.
       append so_requi.
     endloop.
   endif.
endform.                    " OPEN_BOX2

Hi
I am sorry I thought that it is TPLNR field
for EQFNR there is no matchcode or search help
if you want you can create a matchcode/search help and add
It is a CHAR 30 field for which most of the times no values are entered
Reward points for useful Answers
Regards
Anji
Message was edited by:
        Anji Reddy Vangala

Question about main difference between Java bean and Java class in JSP

Hi All,
I am new to Java Bean and wonder what is the main difference to use a Bean or an Object in the jsp. I have search on the forum and find some post also asking the question but still answer my doubt. Indeed, what is the real advantage of using bean in jsp.
Let me give an example to illustrate my question:
<code>
<%@ page errorPage="errorpage.jsp" %>
<%@ page import="ShoppingCart" %>

<jsp:useBean id="cart" scope="session" class="ShoppingCart" />
<html>
<head><title>Shopping Cart</title></head>
<body bgcolor="#FFFFFF">
Your cart's ID is: <%=cart.getId()%>.
</body>
<html>
</code>
In the above code, I can also create a object of ShoppingCart by new operator then get the id at the following way.
<code>
<%
ShoppingCart cart = new ShoppingCart();
out.println(cart.getId());
%>
</code>
Now my question is what is the difference between the two method? As in my mind, a normal class can also have it setter and getter methods for its properties. But someone may say that, there is a scope="session", which can be declared in an normal object. It may be a point but it can be easily solved but putting the object in session by "session.setAttribute("cart", cart)".
I have been searching on this issue on the internet for a long time and most of them just say someting like "persistance of state", "bean follow some conventions of naming", "bean must implement ser" and so on. All of above can be solved by other means, for example, a normal class can also follow the convention. I am really get confused with it, and really want to know what is the main point(s) of using the java bean.
Any help will be highly apprecaited. Thanks!!!
Best Regards,
Alex

Hi All,
I am new to Java Bean and wonder what is the main
difference to use a Bean or an Object in the jsp. The first thing to realize is that JavaBeans are just Plain Old Java Objects (POJOs) that follow a specific set of semantics (get/set methods, etc...). So what is the difference between a Bean and an Object? Nothing.
<jsp:useBean id="cart" scope="session" class="ShoppingCart" />
In the above code, I can also create a object of
ShoppingCart by new operator then get the id at the
following way.
ShoppingCart cart = new ShoppingCart();
out.println(cart.getId());
...Sure you could. And if the Cart was in a package (it has to be) you also need to put an import statement in. Oh, and to make sure the object is accessable in the same scope, you have to put it into the PageContext scope. And to totally equal, you first check to see if that object already exists in scope. So to get the equivalant of this:
<jsp:useBean id="cart" class="my.pack.ShoppingCart"/>Then your scriptlet looks like this:
<%@ page import="my.pack.ShoppingCart %>
<%
ShoppingCart cart = pageContext.getAttribute("cart");
if (cart == null) {
    cart = new ShoppingCart();
    pageContext.setAttribute("cart", cart);
%>So it is a lot more work.
As in my mind, a normal class can also
have it setter and getter methods for its properties.True ... See below.
But someone may say that, there is a scope="session",
which can be declared in an normal object.As long as the object is serializeable, yes.
It may be
a point but it can be easily solved but putting the
object in session by "session.setAttribute("cart",
cart)".Possible, but if the object isn't serializable it can be unsafe. As the point I mentioned above, the useBean tag allows you to check if the bean exists already, and use that, or make a new one if it does not yet exist in one line. A lot easier than the code you need to use otherwise.
I have been searching on this issue on the internet
for a long time and most of them just say someting
like "persistance of state", "bean follow some
conventions of naming", "bean must implement ser" and
so on. Right, that would go along the lines of the definition of what a JavaBean is.
All of above can be solved by other means, for
example, a normal class can also follow the
convention. And if it does - then it is a JavaBean! A JavaBean is any Object whose class definition would include all of the following:
1) A public, no-argument constructor
2) Implements Serializeable
3) Properties are revealed through public mutator methods (void return type, start with 'set' have a single Object parameter list) and public accessor methods (Object return type, void parameter list, begin with 'get').
4) Contain any necessary event handling methods. Depending on the purpose of the bean, you may include event handlers for when the properties change.
I am really get confused with it, and
really want to know what is the main point(s) of
using the java bean.JavaBeans are normal objects that follow these conventions. Because they do, then you can access them through simplified means. For example, One way of having an object in session that contains data I want to print our might be:
<%@ page import="my.pack.ShoppingCart %>
<%
ShoppingCart cart = session.getAttribute("cart");
if (cart == null) {
    cart = new ShoppingCart();
    session.setAttribute("cart", cart);
%>Then later where I want to print a total:
<% out.print(cart.getTotal() %>Or, if the cart is a JavaBean I could do this:
<jsp:useBean id="cart" class="my.pack.ShoppingCart" scope="session"/>
Then later on:
<jsp:getProperty name="cart" property="total"/>
Or perhaps I want to set some properties on the object that I get off of the URL's parameter group. I could do this:
<%
ShoppingCart cart = session.getAttribute("cart");
if (cart == null) {
    cart = new ShoppingCart();
    cart.setCreditCard(request.getParameter("creditCard"));
    cart.setFirstName(request.getParameter("firstName"));
    cart.setLastName(request.getParameter("lastName"));
    cart.setBillingAddress1(request.getParameter("billingAddress1"));
    cart.setBillingAddress2(request.getParameter("billingAddress2"));
    cart.setZipCode(request.getParameter("zipCode"));
    cart.setRegion(request.getParameter("region"));
    cart.setCountry(request.getParameter("country"));
    pageContext.setAttribute("cart", cart);
    session.setAttribute("cart", cart);
}Or you could use:
<jsp:useBean id="cart" class="my.pack.ShoppingCart" scope="session">
<jsp:setProperty name="cart" property="*"/>
</jsp:useBean>The second seems easier to me.
It also allows you to use your objects in more varied cases - for example, JSTL (the standard tag libraries) and EL (expression language) only work with JavaBeans (objects that follow the JavaBeans conventions) because they expect objects to have the no-arg constuctor, and properties accessed/changed via getXXX and setXXX methods.
>
Any help will be highly apprecaited. Thanks!!!
Best Regards,
Alex

Difference between Append structure and include structure

hi can anyone tell me the difference between include structure and append structure with respect to tables defined in ABAP dictionary?
Also how to create them in ABAP dictionary?

HI
INCLUDE:
Includes are used to group fields and insert them together in a table or structure.
An include program has two main functions:
It contains code which can be used by several different programs.
It helps you to modularize programs, which consist of many different logically related parts. Each of these parts is stored as a separate include program.
Include programs improve the readability of programs and make maintenance easier.
Include reports contain rolled out parts of reports. They are called by the main report, and can only be run in conjunction with the main report.
APPEND:
Append structures are used for enhancements that are not included in the standard. This includes special developments, country versions and adding customer fields to any tables or structures.
An append structure is a structure that is assigned to exactly one table or structure. There can be more than one append structure for a table or structure.
The following enhancements can be made to a table or structure TAB with an append structure:
Insert new fields in TAB,
Define foreign keys for fields of TAB that already exist,
Attach search helps to fields of TAB that already exist
Just have a look at this link:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ebd6446011d189700000e8322d00/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ebd6446011d189700000e8322d00/frameset.htm</a>
Rsgards,
Gunasree.
Award marks to helpful answers

Difference between Session method and call transaction

Hi,
please give me the differences between session method and call transaction,
briefly explaining synchronus , asynchronus, process, update.
Thanks in advance

Hi Vijay Kumar
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as CLASSICAL METHOD.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
Among the two methods call transaction is better compared to session bcoz data transfer is faster in it.
Differences between call transaction and session.
Session Method:
1) Data is not updated in the database table until the session is processed.
2) No sy-subrc is returned.
3) Error log is created for error records.
4) Updation is always synchronous.
Call Transaction Method:
1) Immediate updation in the database table.
2) sy-subrc is returned.
3)Error need to be handled explicitly.
4) updation can be synchronous as well as asynchronous.
2) ya u can use using the N mode no screen.
3)u can't handle multiple transaction in call transaction.
4) u can handle multiple transaction in session using the BDC_INSERT fm.
5)When u go to SM35 u can able to see the error records.
Which is best?
That depends on your requirement. Both of them have there advantages.
According to the situation u can choose any one of these.
difference between batch input and call transaction in BDC Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
For session method,these are the function modules to b used.
BDC_OPEN_GROUP
BDC_INSERT
BDC_CLOSE_GROUP
For call transaction,this is the syntax.
CALL TRANSACTION TCODE USING BDCDATA
MODE A or E or N
UPDATE A or S
MESSAGES INTO MESSTAB.
Take a scenario where we need to post documents in FB01 and the input file has say 2000 records (2000 documents, not line items in FB01 but 2000 records)
In the BDC call transaction method
We call the transaction FB01 2000 times (once for each record posting) and if the processing fails in record no 3 it can be captured and start with reocord 4.
Eg: Loop at itab.
call transaction FB01
capture errors
endloop.
In the session method.
We do not explicity call the transaction 2000 times, but all the records are appeneded into a session and this session is stored. The processinf of the session is done wwhenever the user wants it to be done. Hence the errors cannot be captured in the program itself
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
Batch Input Session method is asynchronous as told by others here. But the advantage of this is that you have all the error messages and the data for each transaction held persistantly. You don't have to code anything for processing them or writing the logs.
But at the same time, the same feature can be disadvantageous if you need to react to an error or if there are too many errors to manually correct in a session. Since the session are created in the program and its execution is done seperately, you loose the trackability of such transactions.
With a call transaction, what was a disadvantage above will become an advantage. Call transaction immediately gives you messages back and you can react to it in your program. But the disadvantage is that, if you have several hundreds of transactions to run, running them from within the program can be resource crunching affair. It will hamper the system performance and you cannot really distribute the load. Of course, you have some mechanisms with which you can overcome this, but you will have to code for it. Also, storing the messages and storing the errored transaction data etc will have to be handled by you in the program. Whereas, in batch input session, your program's job is to just create the session, after that everything is standard SAP system's responsibility.
Ideally, you should do a call transaction if the resources are not a problem and if it fails, put the errored transaction into a session.
You can decide based on the data volume that your BDC is processing. If data volume is high go for session else call transaction will do.The call transaction updates will be instantaneous where as session needs to be processed explictly after creation.
Session Method
1) Session method supports both small amount of data aswell as large amount of data
2) data processing is asynchronus and data updation is synchronus.
3) it process multiple apllication while perfomaning validations.
4) in session method data will be updated in data base only after processing session only.
5) system provide by default logfile for handling error records.
6) it supports both foreground aswell as background process
in bdc we use FM ...
bdc_open_group " for creating Session
bdc_insert " adding transaction and bdcdata table for updating database
bdc_close_group " for closing Session
Call Transaction
1) Call transaction exclusively for small amout of data
2) it supports only one apllication while perfoming validations
3) there is no default logfile, We can explicitly provide logic for creating logfile for handling error records.
we can create logfile by using structure....BDCMSGCOLL
4) it doesn't support background processing.
5) data processing is synchronous and Data updation is Synchronous( default), in
this method also supports daya updation in asynchronus process also.
syntax:
Call transaction <transaction-name> using BDCDATA
mode <A/N/E>
update <L/A/S>
messages into BDCMSGCOLL.
BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
Features :
BDC is an automatic procedure.
This method is used to transfer large amount of data that is available in electronic medium.
BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
BDC uses normal transaction codes to transfer data.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as CLASSICAL METHOD.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
Check the following links:
http://www.sap-img.com/bdc.htm
See below example code :
Call three FM : BDC_OPEN_GROUP,BDC_INSERT and BDC_CLOSE_GROUP.
Once you execute the program and it creates the session at SM35 Transaction.
Report : ZMPPC011
Type : Data upload
Author : Chetan Shah
Date : 05/05/2005
Transport : DV3K919557
Transaction: ??
Description: This ABAP/4 Program creates new Production Versions
(C223). It accepts tab-delimited spreadsheet input and
creates BDC sessions.
Modification Log
Date Programmer Request # Description
06/10/2005 Chetan Shah DV3K919557 Initial coding
report zmppc011 no standard page heading line-size 120 line-count 55
message-id zz.
pool of form routines
include zmppn001.
Define BDC Table Structure
data: begin of itab_bdc_tab occurs 0.
include structure bdcdata.
data: end of itab_bdc_tab.
Input record layout of Leagcy File
data: begin of itab_xcel occurs 0,
matnr(18) type c,
werks(4) type c,
alnag(2) type c,
verid(4) type c,
text1(40) type c,
bstmi like mkal-bstmi,
bstma like mkal-bstma,
adatu(10) type c,
bdatu(10) type c,
stlal(2) type c,
stlan(1) type c,
serkz(1) type c,
mdv01(8) type c,
elpro(4) type c,
alort(4) type c,
end of itab_xcel.
data: begin of lt_pp04_cache occurs 0,
matnr like itab_xcel-matnr,
werks like itab_xcel-werks,
alnag like itab_xcel-alnag,
plnnr like mapl-plnnr,
arbpl like crhd-arbpl,
ktext like crtx-ktext,
end of lt_pp04_cache.
data: v_ssnnr(4) type n,
v_lines_in_xcel like sy-tabix,
v_ssnname like apqi-groupid,
v_trans_in_ssn type i,
wa_xcel LIKE itab_xcel,
l_tabix like sy-tabix,
v_matnr like rc27m-matnr,
v_plnnr like mapl-plnnr,
v_plnal like mapl-plnal,
v_tcode like sy-tcode value 'C223',
v_plnty like plas-plnty value 'R',
v_objty like crhd-objty value 'A',
v_plpo_steus like plpo-steus value 'PP04',
v_verwe like crhd-verwe value '0007'.
Parameters
selection-screen: skip 3.
selection-screen: begin of block 1 with frame.
parameters: p_name like rlgrap-filename
default 'C:\My Documents\InputFile.txt'
obligatory,
bdc session name prefix
p_bdcpfx(6) default 'ZPVCRT'
obligatory,
number for transction per BDC session
p_trnssn type i
default 2000 obligatory,
retain the BDC session after successfull execution
p_keep like apqi-qerase
default 'X',
user who will be executing BDC session
p_uname like apqi-userid
default sy-uname
obligatory.
selection-screen: end of block 1.
possible entry list (F4 dropdown) for input file name
at selection-screen on value-request for p_name.
*-SELECT FILE FROM USERS LOCAL PC
call function 'WS_FILENAME_GET'
exporting
DEF_FILENAME = ' '
def_path = 'C:\Temp\'
mask = ',.,..'
mode = 'O'
title = 'Select File '(007)
importing
filename = p_name
RC =
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
if sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
begin the show
start-of-selection.
read data from input file
perform transfer_xcel_to_itab.
loop at itab_xcel.
hang on to xcel line num
l_tabix = sy-tabix.
each line in the xcel file marks begining of new prod.version defn
if num-of-trnas-in-session = 0, create new BDC session
if v_trans_in_ssn is initial.
perform bdc_session_open.
endif.
begin new bdc script for rtg create trans
fill in bdc-data for prod.version maintenance screens
perform bdc_build_script.
insert the bdc script as a BDC transaction
perform bdc_submit_transaction.
keep track of how many BDC transactions were inserted in the BDC
session
add 1 to v_trans_in_ssn.
if the user-specified num of trans in BDC session is reached OR
if end of input file is reached, close the BDC session
if v_trans_in_ssn = p_trnssn or
l_tabix = v_lines_in_xcel.
perform bdc_session_close.
clear v_trans_in_ssn.
endif.
endloop.
top-of-page.
call function 'Z_HEADER'
EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =
FORM TRANSFER_XCEL_TO_ITAB *
Transfer Xcel Spreadsheet to SAP Internal Table *
form transfer_xcel_to_itab.
Read the tab-delimited file into itab
call function 'WS_UPLOAD'
exporting
filename = p_name
filetype = 'DAT'
IMPORTING
filelength = flength
tables
data_tab = itab_xcel
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
others = 8.
if sy-subrc = 0.
sort the data
sort itab_xcel by matnr werks.
clear v_lines_in_xcel.
if no data in the file - error out
describe table itab_xcel lines v_lines_in_xcel.
if v_lines_in_xcel is initial.
write: / 'No data in input file'.
stop.
endif.
else.
if file upload failed - error out
write: / 'Error reading input file'.
stop.
endif.
endform.
FORM BDC_SESSION_OPEN *
Open BDC Session *
form bdc_session_open.
create bdc session name = prefix-from-selectn-screen + nnnn
add 1 to v_ssnnr.
concatenate p_bdcpfx v_ssnnr into v_ssnname.
open new bdc session
call function 'BDC_OPEN_GROUP'
exporting
client = sy-mandt
group = v_ssnname
keep = p_keep
user = p_uname
exceptions
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
others = 11.
endform.
FORM BDC_BUILD_SCRIPT *
Build BDC *
form bdc_build_script.
data: l_arbpl like crhd-arbpl,
l_text1 like mkal-text1,
l_mdv01 like mkal-mdv01,
l_mapl like mapl.
clear bdc-data itab - begin of new bdc transaction
clear itab_bdc_tab.
refresh itab_bdc_tab.
read material cross reference tables to determine sap part#
clear : v_matnr, v_plnnr, v_plnal.
perform read_matnr_cross_ref using itab_xcel-matnr
itab_xcel-werks
changing v_matnr.
determine the version description to use
if itab_xcel-text1 is initial.
l_text1 = itab_xcel-verid.
else.
l_text1 = itab_xcel-text1.
endif.
determine the routing group# and group ctr# to use
perform read_routing .
determine the production line to use
if itab_xcel-mdv01 is initial.
if not provided in the file then:
prod line = work ctr on the last PP04 op of the rtg determined above
perform read_wc_on_last_pp04 using v_plnnr v_plnal
changing l_mdv01.
NOTE: when executing the above form\routine, if v_plnnr is initial
or v_plnal is initial, THEN l_mdv01 will automatically be
returned blank (ie initial)
else.
l_mdv01 = itab_xcel-mdv01.
endif.
build bdc script
perform bdc_build_script_record
fill in initial screen
using: 'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=ENTE',
' ' 'MKAL-WERKS' itab_xcel-werks,
' ' 'MKAL-MATNR' v_matnr,
' ' 'MKAL_ADMIN-DISPO' space,
' ' 'MKAL-PLNNR' space,
' ' 'MKAL_ADMIN-STTAG' space,
' ' 'MKAL-PLNNG' space,
' ' 'MKAL-MDV01' space,
' ' 'MKAL-PLNNM' space,
click create button on initial screen and go to detail screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=CREA',
fill in the detail screen and go back to initial screen
'X' 'SAPLCMFV' '2000',
' ' 'BDC_OKCODE' '=CLOS',
' ' 'MKAL_EXPAND-MATNR' v_matnr,
' ' 'MKAL_EXPAND-VERID' itab_xcel-verid,
' ' 'MKAL_EXPAND-TEXT1' l_text1,
' ' 'MKAL_EXPAND-BSTMI' itab_xcel-bstmi,
' ' 'MKAL_EXPAND-BSTMA' itab_xcel-bstma,
' ' 'MKAL_EXPAND-ADATU' itab_xcel-adatu,
' ' 'MKAL_EXPAND-BDATU' itab_xcel-bdatu,
' ' 'MKAL_EXPAND-PLTYG' v_plnty,
' ' 'MKAL_EXPAND-PLNNG' v_plnnr,
' ' 'MKAL_EXPAND-ALNAG' v_plnal,
' ' 'MKAL_EXPAND-STLAL' itab_xcel-stlal,
' ' 'MKAL_EXPAND-STLAN' itab_xcel-stlan,
' ' 'MKAL_EXPAND-SERKZ' itab_xcel-serkz,
' ' 'MKAL_EXPAND-MDV01' l_mdv01,
' ' 'MKAL_EXPAND-ELPRO' itab_xcel-elpro,
' ' 'MKAL_EXPAND-ALORT' itab_xcel-alort,
save the production version from initial screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=SAVE'.
endform.
FORM BDC_SUBMIT_TRANSACTION *
Submit BDC Session *
form bdc_submit_transaction.
Load BDC script as a trqansction in BDC session
call function 'BDC_INSERT'
exporting
tcode = v_tcode
tables
dynprotab = itab_bdc_tab
exceptions
internal_error = 01
not_open = 02
queue_error = 03
tcode_invalid = 04.
endform.
FORM BDC_BUILD_SCRIPT_RECORD *
form bdc_build_script_record using dynbegin name value.
clear itab_bdc_tab.
if dynbegin = 'X'.
move: name to itab_bdc_tab-program,
value to itab_bdc_tab-dynpro,
'X' to itab_bdc_tab-dynbegin.
else.
move: name to itab_bdc_tab-fnam,
value to itab_bdc_tab-fval.
shift itab_bdc_tab-fval left deleting leading space.
endif.
append itab_bdc_tab.
endform.
FORM BDC_SESSION_CLOSE *
Close BDC Session *
form bdc_session_close.
close the session
call function 'BDC_CLOSE_GROUP'
exceptions
not_open = 1
queue_error = 2
others = 3.
skip 2.
if sy-subrc ne 0.
write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
else.
write : / 'Session created:', v_ssnname,
50 '# of transactions:', v_trans_in_ssn.
endif.
endform.
*& Form read_routing_cache
*FORM read_routing_cache USING pi_matnr
pi_werks
pi_alnag
pi_verid
pi_mdv01.
DATA: BEGIN OF lt_plpo OCCURS 0,
vornr LIKE plpo-vornr,
objty LIKE crhd-objty,
objid LIKE crhd-objid,
arbpl LIKE crhd-arbpl,
END OF lt_plpo,
l_mapl_plnnr LIKE mapl-plnnr.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
SELECT plnnr INTO l_mapl_plnnr
FROM mapl UP TO 1 ROWS
WHERE matnr = pi_matnr AND
werks = pi_werks AND
plnty = 'R' AND
plnal = pi_alnag AND
loekz = space.
ENDSELECT.
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
*ENDFORM. " read_last_pp04_operation_cache
*& Form read_routing
form read_routing.
data: begin of lt_mapl occurs 0,
plnnr like mapl-plnnr,
plnal like mapl-plnal,
end of lt_mapl,
l_arbpl like crhd-arbpl.
get all the rtg# and grp ctr# from MAPL
select plnnr plnal
into corresponding fields of table lt_mapl
from mapl
where matnr = v_matnr and
werks = itab_xcel-werks and
plnty = v_plnty and "Rate Routing
loekz = space. "with del flag = OFF
sort lt_mapl by plnal.
if not itab_xcel-verid is initial.
if the verid=0001 then use the 1st good rtg-grp# and grp-ctr#
if itab_xcel-verid = '0001'.
read table lt_mapl index 1.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
else.
if the verid0001 then use the rtg-grp# and grp-ctr# of the routing
whose work center on the last PP04 operation matches the given verid
loop at lt_mapl.
clear l_arbpl.
get the work center from the last PP04 operation
perform read_wc_on_last_pp04 using lt_mapl-plnnr
lt_mapl-plnal
changing l_arbpl.
if itab_xcel-verid = l_arbpl.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
exit.
endif.
endloop.
endif.
else.
do nothing
endif.
For version IDs that are other then '0000' or 'ZWIP' :--
if itab_xcel-verid NE '0000' and
itab_xcel-verid NE 'ZWIP'.
if routing group# or group counter was not determined, make the
valid-to date 99/99/9999 so that the BDC, on execution, errors out.
if v_plnnr is initial or
v_plnal is initial.
itab_xcel-bdatu = '99/99/9999'.
endif.
endif.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
endform. " read_last_pp04_operation_cache
*& Form read_wc_on_last_pp04
form read_wc_on_last_pp04 using pi_plnnr
pi_plnal
changing pe_arbpl.
data: begin of lt_plpo occurs 0,
vornr like plpo-vornr,
objty like crhd-objty,
objid like crhd-objid,
arbpl like crhd-arbpl,
end of lt_plpo.
get all the PP04 operations for the given rtg# & grp-ctr#
select vornr eobjty eobjid e~arbpl
into corresponding fields of table lt_plpo
from plas as b
inner join plpo as c
on bplnty = cplnty and
bplnnr = cplnnr and
bzaehl = czaehl
inner join crhd as e
on carbid = eobjid
where b~plnty = v_plnty and "Rate Routing
b~plnnr = pi_plnnr and
b~plnal = pi_plnal and
c~loekz = space and "Oper Del Flag = OFF
c~steus = v_plpo_steus and "PP04
e~objty = v_objty. "WC Obj Type = 'A'
read the last operation
sort lt_plpo by vornr descending.
read table lt_plpo index 1.
pe_arbpl = lt_plpo-arbpl.
endform. " read_wc_on_last_pp04
Goto LSMW-> Select Direct Input method in 1st step. These are the standard programs for data transfer.
Otherwise goto SPRO->SAP Reference IMG-> Under this you'll find standard data transfer programs module wise.
Reward points,
Shakir

Difference between Stock transfer and transfer posting

I am little confused about the difference between stock transfer and transfer posting. Please clarify
<<Locked - reason: failed to search before posting question>>
Edited by: Csaba Szommer on Feb 9, 2011 9:10 AM

Hello,
Transfer posting may involve or not involve the physical goods transfer. In the system you might do transfer posting from quality to unrestricted, or from one store location to another.
In transfer posting you remove and or replace materials from storage in one storage location and place them in another storage location.
That transction code you use for transfer posting MB1B with following movement types may be used
301, 303,305,311,411,309.
301 is Stock Transfer Between Plants in One Step
303 & 305 : Stock Transfer Between Plants in Two Steps
In stock transfer, it always involves physical movement of goods, like transfer between plants under same company code or different company codes.
Following types are possible with STO's
Stock Transport Order Without Delivery
Stock Transport Order with Delivery via Shipping
Stock Transport Order with Delivery and Billing Document/Invoice
http://help.sap.com/saphelp_470/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/content.htm
Please go through attach SAP document
BR,
Tushar

Error Message "There is difference between document total and its component

Error message number 439-138. Is there a sight I could look up error codes?
There is difference between document total and its components

Hi Deborah ,
Please look at this thread..
Error when adding AP invoice
So far it looks like a bug
You can also search in sap service market --support --sap notes
there are plenty of threads in forum .....
Hope this helps
Bishal

Difference between Search Helps and Match Codes?

Similar Messages

Maybe you are looking for