Difference between "Set to 'In Development'" and "Reset Status to 'In Dev."

In the action profile SDHF_ACTIONS which is the difference between the action IN_PROCESS and TESTED_AND_NOT_OK. The first one has only the processing parametere USER_STATUS, while the second one has the processing parameters USER_STATUS and RESET_STATUS=X. How does it works the processing parameters RESET_STATUS? The TESTED_AND_NOT_OK action could be defined like IN_PROCESS or the RESET_STATUS is an important parameter?
Thanks
Antonello

Hey Antonello,
Please note that both the actions will set the status of the transaction to 'In development'.
To differenciatate between the two, SAP has used this distinction.
When you use action IN_PROCESS , then you will get the prompt for the Transport requeest creation.
When you use action 'TESTED_AND_NOT_OK', you will not get the prompt for new transport request ( As you should have already created it by now ).
Using that Parameter 'RESET_STATUS', SAP decides programatically whether the prompt for the ' New Transport Request' should be given to the user or not
Reward if this post was usefull.
Revert for any clarifcations
Regards,
Suzzanne.

Similar Messages

What is the difference between SAP NW PI7.1 and PI7.1 EHP1

We have a customer using SAP PI7.1 EHP1. The application to be deployed
isdeveloped on SAP Netweaver PI 7.1 SP06.
We need to know if application developed and transported from PI7.1 is
compatible with EHP1?
Below are the Components used by the application .
1) SSL communication using SOAP adapter
2) Java mapping , Graphical mapping , XSLT mapping
3) Customised EJB modules
4) Adapter framework
5) ALE layer for IDoc communication from ERP to PI
6) RFC lookups to PI system and ERP system.
Questions
1)Will PI EHP1 be able to communicate with PI7.1 using SOAP adapter ?
2) What is the difference between SAP NW PI7.1 and PI7.1 EHP1 ?
Regards,
Sneha

Hi,
EHP Pi7.1 new
IPv6 Support in SAP Systems (new)
Async/Sync and Sync/Async Bridge in the JMS Adapter (New)
High Availability (New) Locate the document in its SAP Library structure
Use
A new concept is available for setting up a high availability environment for SAP NetWeaver Process Integration (PI). To do this, you need SAP Web Dispatcher for load balancing, and you must reconfigure your HTTP, RFC, and RMI connections so that they can be used for load balancing. You must also make various configuration steps in other components of your PI environment.
[Level 4: Document: XML to Text Conversion Module (New)] XML to Text Conversion Module (New)
Message Packaging (New)
Monitoring Milestones (New) Locate the document in its SAP Library structure
Use
You can use the new scenario variant Monitoring Milestones of the Business Process Management scenario to define a monitoring process that can monitor events from different applications. A monitoring process can subscribe to events from SAP or non-SAP systems.
check given Link
http://help.sap.com/saphelp_nwpi711/helpdata/en/61/8c3842bb58f83ae10000000a1550b0/frameset.htm
Regards,
Amit

What is the difference between version 4.7 EE and ECC 6.0 in SD module.

Hi SAP Gurus,
what are the features in 4.7 EE version in general.
what are the features in ECC 6.0 version in general.
then give me the exact difference between version 4.7 EE and ECC 6.0 in SD module.
if u give the information, then u will get the rewards.
Regards,
somu.

Hi Somu,
These are additional enhancements avialble in ECC6.0 other than that remaining same as 4.7E
1.E-Commerce:- SAP ERP provides powerful e-commerce capabilities that can be expanded in an easy, cost-effective manner in line with business growth. Organizations can run a complete sales process on the Internet, and provide business-to-business (B2B) and business-to-consumer (B2C) customers with personalized and interactive online self-services.
2.Mobile Sales for Handhelds:-SAP ERP enables sales professionals to access front- and back-office business processes and to manage critical sales activities in the field using standard PDAs or other handheld devices (including those with bar code scanners). In this area, SAP ERP provides the following functions:- Customer managementWith SAP ERP, sales professionals may enter, view, and modify detailed customer information, and view sales order history for each customer.- Sales order managementSAP ERP enables sales staff to take sales orders via bar code scanners; search, create, and modify sales orders; and list or sort sales order partners.- Material managementSupport for material management for mobile sales enables staff to view material lists or details for a specific material, search material, and display customer-specific prices.
3.Resource-Related Down Payments and Billing:-- Supports creation of down-payment requests analogous to the functions offered by resource-related billing- Enables organizations to bill the requesting company code for services provided via a resource-related billing document.
4.SAP Beverage Functions Available for the Consumer Products Industry:- As of SAP ERP Central Component (SAP ECC) 5.00, the following functions from the SAP beverage industry solution are available for the consumer products industry:* SAP ECC 5.00, consumer products (EA-CP 500)- Material sorting- Extra charge- Empties management- Part load lift orders- Pendulum list indirect sales- Sales returns- Excise duty* SAP ECC 5.00, supply chain management extension (EA-SCM 500)- Direct store delivery back-end- Master data- Visit control- Transportation planning (including loading units, aggregation categories)- Vehicle space optimization- Output control (including valuated delivery note)- Route accounting (including tour data entry, cash payer, route settlement)* SAP ECC 5.00, industry-specific sales enhancements (EA-ISSE 500)- Extended rebate processing.
5.Credit Management:-Integrating sales and distribution (SD) credit management with SAP Credit Management application:With SAP ERP 6.0 application, you can also use SAP Credit Management in SAP Financial Supply Chain Management set of applications (FIN-FSCM-CR) to perform all credit checks and commitment updates for all areas of sales (SD-BF-CM). In SAP Credit Management, you can update the data from multiple systems. This enables you to execute credit checks with consistent data in distributed systems, too. Furthermore, you can connect to external credit information providers by extensible markup language (XML) interfaces. Alternatively, you can continue to use SD Credit Management (SD-BF-CM).
6.E-Commerce: Catalog Management :-As of SAP ERP 6.0 application, you must carry out product catalog replication from your ERP solution to the Text Retrieval and Information Extraction (TREX) server for use in the Web shop, using the report ISA_CATALOG_REPLICATION.
7.E-Commerce: Quotation and Order Management:- Order creation with reference to a contract that has been displayed* Lock of sales documents to avoid concurrent access during the order change process* Display of bills of material in the shopping basket* Free goods processing* Processing of grid products for the SAP Apparel and Footwear application* One-step business order processing* Selection of multiple transaction types in the shopping basket* Credit card support in business-to-business (B2B) Web shop* Material number format conversion* Maintenance of delivery priority in the shopping basket (B2B)* Document search for all documents across all sales areas* Interprocess communication-characteristic value display in basket and order confirmation
8.E-Commerce: Selling Over eBay:-Creation and management of product listings on eBay leverages the e-commerce order management and fulfillment capabilities of the SAP ERP application by easily tying existing tax, pricing, shipping, and payment configurations to post-auction processing. Enhancements in 2005: * You can use the business-to-consumer (B2C) checkout instead of the eBay checkout. With the B2C checkout, you can maximize cross-selling and up-selling opportunities by leveraging B2C functionality, determine tax and shipping using the elaborate methodologies available through condition techniques in SAP ERP 6.0. * E-mail notification scenario: winner notification to keep the auction winner updated with the status of the auction and of his or her order * Monitoring through features such as single-activity trace (SAT), heartbeat, and logging * Creation and publishing of multiple-item auctions and manual retraction of winners
9.E-Commerce: User Management:-- Web-based user management for business-to-business internet users - Assignment of authorization roles to users in web-based user management - Automatic migration of SU05 to SU01 internet users
10.Enterprise Services in Sales Order Management:-Please check in the Enterprise Services Workplace site which enterprise services are available for sales order management on the SAP Developer Network site (www.sdn.sap.com).
11.Internet Pricing and Configurator (IPC):-The IPC is enhanced and integrated to allow configuration within the sales documents of the SAP ERP application reusing existing model data while leveraging its improved functionality and advanced user interface within SAP ERP.
12.Price Catalog (PRICAT): Inbound Processing (Retail):-Inbound message processing of PRICAT essages:As of SAP ERP Central Component enterprise extension retail 6.0 (EA-RET 600) component, you can create and change article data automatically, or in an interface for mass data handling. The system takes both single and generic articles and bills of material and prices into account.
13.Rebate Condition Records Using Scales:-As of SAP ERP 6.0 application, you can set up rebate agreements so that the scale base value and the rebate scale level is derived from the total sales volume of multiple condition records. You do this by grouping condition records in the rebate agreement.
14.SAP Role: Internal Sales Representative:-SAP role internal sales representativeThis role delivers all the functions to fulfill the requirements of an internal sales representative. This includes tasks such as answering phone calls from customers and prospective customers, processing incoming inquiries and sales orders, and preparing quotations and sales contracts.Target groupThe responsibilities of an internal sales representative (or customer service representative) include the following:- Answering phone calls from customers and prospective customers- Answering product, price, and order status related questions- Processing incoming inquiries and sales orders- Preparing quotations and sales contracts- Taking sales orders and ensuring successful order processing for example, taking care of the completeness of sales documents, releasing delivery-blocked orders, and so on - Support for the outside sales force for example, checking on quotations, updating customer master data, and so on- Preparing reports and sales analyses for the sales manager and the sales teamWork overview This work center gives you an overview of your daily work and gives you easy access to your most important tasks. Sales documents This work center allows you to work on all your sales documents. You can create and maintain inquiries, quotations, sales orders, sales contracts, scheduling agreements, and billing documents. Order fulfillment This work center allows you to monitor order fulfillment. You can display deliveries, backorders, and shipments, and can check product availability.Master data This work center enables you to work on all your master data. You can create and maintain business partners, customer agreements, prices and conditions, and products.
I hope it will help you
Regards,
Murali.

Is there a difference between the Ethernet WAN port and the other 3 Ethernet Ports on a Time Capsule?

As posted previously, my time capsule will not set up properly because I get an IP address conflict pop up window. Is there a difference between the "Ethernet WAN Port" and the other three ports on the back of the Time Capsule? I may have the DSL modem hooked into the "Ethernet WAN Port". Thanks.

it depends what you want to achieve and what configuration you have on your DSL modem/router.
Resetting TC and run connection wizard from the Airport utility.
Post the problems.

PowerShell Difference between Set-StrictMode V2,V3,V4.

Could somebody please explain the difference between setting Set-Strictmode -Version 2, -Version 3, and -Version 4, as opposed to just using -Latest?

I think you are really looking for this:
#requires -Version 2.0
This guarantees that the user will be notified if they try to run it on version 1.
Set-Strict is not for the end user. It is for the developer. As I posted above. If you are not a wel experienced developer you should not be using strict.
As long as you have to ask about it you should not use it. Eventually you will likely learn enough about scripting and programming large projects to understand how to use "strict".
You have posted nothing that indicates that it is required for anything you are doing. Use "#requires" instead.
¯\_(ツ)_/¯

Getting Big Headache, What is difference between Flash Lite 3.1 and Flash Player 7

Hello, I am asking questions about the two similar yet different programs for Pocket PC version only:
1) Which came first, Flash Lite 3.1 or Flash Player 7?
2) If I have both in my Pocket PC, will there be product incompatibility?
3) What is the difference between Flash Lite 3.1 and Flash Player 7.
4) I have a Flash Lite 3.1 but uninstall information says "Flash Lite 3.1 for Opera Mobile", did you releaase this? Is this an illegal copy? A developer's copy?
*I don't know exactly where I got it, but I got it from the HTC developer's forum: XDA-developers.com
*I also use Opera mobile, a web browser for Pocket PC's.
5) What is difference between Flash Lite 3.1 and Flash Lite 3.1 for Opera? Is the only difference is that Flash Lite Supports everything flash related, while Flash Lite Opera supports only flash in opera?
Hi, I don't expect all answers, but I hope someone or someone from adobe support can clear some things up for me.

The program under my "remove programs" list is specifically called "Adobe Flash Lite for Opera". The XDA forums people said along time ago that it was Flash Lite, and kept calling it Flash Lite, and not Flash Player 7.
Now what about this:
http://www.adobe.com/products/flashlite/version/
The table shows the differences between FP 7 SDK, FL 2.1, and FL 3.1. And it's quite obvious that FL 3.1 has way more features than Flash Player 7. What does SDK mean? And why are you telling me FP 7 has more features?
With this information, can you or anyone else provide any more details and clarification?

Difference between the two modes ws_policy and sap_wsdl

Dear All,
what is the difference between the two modes ws_policy and sap_wsdl and how do we set them and where do we set them.
do let me know the steps to be followed.
Thanks & Regards
Venugopal

Venu,
Please check this document from Bill where he has explained clearly:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c00ca32e-f991-2b10-f5be-97114bd2b08f?overridelayout=true
Regards,
---Satish

Difference between checking Objects in SU24 and in ABAP code

Hi all,
What is the difference between objects checked in SU24 and the objects checked in ABAP Code.
I think if objects are even checked to No in SU24 and they are in ABAP code then user is able is able to execute that object, is this correct?
and vice versa, if objects are checked to yes in su24 and not in the ABAP code then user wont be able to excute? is this correct
or what is the purpose of maintaing objects both in SU24 and in ABAP Code.
Thanks,
Sun

This is what is known in German as a "Schwerer Geburt"... (not sure whether there is an English term which has the same meaning)...
When you searched, did you read this thread?:
F110 - S_BTCH_ADM
>
Julius Bussche wrote:
> My understanding of this confusion is ...
>
> ... SAP's development systems deem an "unknown" check to be successfull until specifiied for a check (this is different in customer systems - which leads many to believe that adding and removing check indicators from SU24 will add and remove authority-checks....),
>
> ...This problem then reproduces itself both in SU53 and ST01 once the SU22 / SU24 error has been made.
>
> ...It is one of those things which you need to know or find on your own (not too difficult), otherwise you simple don't know it.
It is context specific, when the context is known to the customer system where the code is running => You cannot activate a check in SU24 if it is not coded anywhere (please distingish between starting a transaction, using it, and navigating further from that transaction...). The only case where SAP does what you seem to be assuming (or hoping for...) is infact to turn an authority-check off in some cases or to make the calling context known when it is remote (in which case sy-tcode or the entry point context is not known)...
*It is not to turn the check on when it is not coded anywhere!!!
Perhaps you would like to phrase your final question just one more time.
Cheers,
Julius

What is the difference between j2sdk1.4.1_03/jre and j2re1.4.1_03?

Hi,all!
What is the difference between j2sdk1.4.1_03/jre and j2re1.4.1_03?
Why there have two JRE? Which one we should use?

JRE - Java Runtime Enviroment, what you stick on the end-user computers - http://www.java.com
SDK - Software Development Kit (aka JDK - Java Developer Kit) - http://java.sun.com

What is the difference between 11.1.0.1 And 11.1.0.1.1

What is the difference between 11.1.0.1 And 11.1.0.1.1

11.1.0.1 is the base version of Oracle installed on the system.
11.1.0.1.1 is the version of PSU (patch set update) applied to the base release version.
Take a look at this http://docs.oracle.com/cd/B28359_01/server.111/b28310/dba004.htm

Difference between doc date,posting date and invoice date

hi bw guys
can someone give a brief on the difference between doc date,posting date and invoice date.and the invidual definitions
thank you

Hi,
Posting Date: Date which is used when entering the document in Financial Accounting or Controlling. The posting date can differ from both the entry date and the doc date.
Document Date: The document date is the date on which the original document was issued. Ex: Inv date, Bill date etc.,
Invoice Date : Usually the date when goods are shipped. Payment dates are set relative to the invoice date.
-Vikram

Differences between the Portal Data Collector and the Activity Data Collect

Hello,
I want to know what are the differences between the Portal Data Collector and the Activity Data Collector?
Best Regards.
Pablo Mortera.

All of my SQL Server instances are sql server 2008r2 standard edition(10.50.2500). MDW is existing database, I try to setup collection sets for multiple instances and store data in one central MDW database
I create MDW in one instance, then run run configure Management Data Warehouse in target intance. collection sets were created successfully, but job failed with following error:
Executed as user: COCAD\INTDEPT01SQLAgentC10. The Management Data Warehouse version "00.00.0000.00" is not supported by the current data collector. Please upgrade the Management Data Warehouse by running the Management Data Warehouse Configuration
Wizard. Process Exit Code 5. The step failed.
Thanks
PAULqaz

Difference between Excise duty on Setoff and Excise duty on Inventory

Hi,
What is the difference between Excise duty for Setoff and Excise duty for Inventory?
regards,
sathya

hi Sathya
Excise duty on set off means the values goes to a particular G/L and take the credit of it whie selling the material. Excise duty on inventory means your value will get loaded to your inventory. In case of duties on set off, you define your own account keys against condition type in tax procedure and G/L is assigned to this Acc key on OBYC/OB40. and in case of duty on inventory, standard acc key NVV is assigned and no G/L assignment is carried out in OBYC/OB40.
Reward if helpful.
Thanks & Regards
Kapil Nanda

Difference between abstract portal component ,dynpages and jsp dynpage

Hi All,
I am new to the SAP world.Can you help me out in finding the difference between abstract portal component ,dynpages and jsp dynpage in Portal development.Please send me any information.

Hi,
Welcome to SDN Community
This blog will brief you the differences between them,
Java development methodologies (Part II)
Regards
Srinivasan T

Difference between business process, sales process and order process

what is the difference between business process, sales process and order process?

Dear Gopala,
business process is a general definition of the process which you have:
for example, you get an order, you have no goods, but you can produce them, you start an assambly processing, the production order will be created, then the goods will be prepatred, then the delivery will be created, the goods issue booked then your customer gets thwe goods and send the delivery confirmation, you create an invoice etc.etc.
sales process is a part of a business process.
Sales process shows how you sell the goods, there are different sales document categories to do this: sales orders, contracts, scheduling agreements etc.
order process is only one of possibilities of the sales process.
Order process is used if you get really a one-time (or at lease not on a regular basis many times) the simple orders where your customer says what goods he would like to receive and when. Then you create a sales order (in dialog transaction VA01) and can create a delivery. There are different types of sales orders in the standard. The customizing of sales order types is available under the transaction VOV8.
I hope, this info help you a little bit further to understand SD design.
Kind regards,
Akmal Vakhidov
Development Support SD, SAP

Difference between "Set to 'In Development'" and "Reset Status to 'In Dev."

Similar Messages

Maybe you are looking for