Difference between SOLMAN and ASAP Project Selector
How different is SOLMAN from ASAP Project Selector as far as roadmaps for standard SAP Implementation methodologies are concerned? Does SOLMAN consist of questionnaires like is the case with ASAP Project Selector?
Hi Namrata
1. How different is SOLMAN from ASAP Project Selector as far as roadmaps for standard SAP Implementation methodologies are concerned?
A. The SOLMAN is a different tool altogether. it is an enhancement to the ASAP Methodology for the latest versions of SAP. In SOLMAN we will select the required business and its processes supplied by the SAP. Whereas we need to change the necessary modifications to the required objects and do the enhancements to the default configurations. In SOLMAN we need to define the landscape very initially. If a project is implementing with SOLMAN, then each and every request should be routed through SOLMAN and stored in SOLMAN and also each and every requirement as well as all BPP should be kept in SOLMAN. And configuration will also be done from SOLMAN itself, whereas earlier in ASAP methodology this doesn't exist.
2. Does SOLMAN consist of questionnaires like is the case with ASAP Project Selector?
A. SOLMAN will not consist any questionnaires like in ASAP project selector. It is an extension to the ASAP methodology. for preparing the as is study we need to follow the ASAP methodology, and for preparing the blueprint and configuration, we will use the SOLMAN.
Similar Messages
-
Difference between save and publish on project professional 2013
Dear Barbara
What's difference between save and/or publish tasks from project professional 2013 onto project server 2013 integrated with TFS?
For me its the same, if you exclude the integration with TFS in this scenario, that demands publishing, the tasks will be saved in project server anyway.
Its that right? Thank you.
Adautohi Adauto,
As a project owner when you create project plan from PWA or from Project Professional Once you save it means it will go to draft database and will be available to you in the server but you can not see it onto Project center.
Once you Click on Publish then project get publish and sits in publish database at the same time it will sync reporting database too. Once project get Publish then only all the team member who are associated with project will be able to see the project
in project center including you .
Also Users who are having either same RBS assigned to them or heigher to you will be able to see the project onto the project center.
Also All the resource will get notified and task assignment will be assigned to team members.
This is a same case for Project server with TFS integration and normal project server without TFS integration
Main Usability of Save is :
As a Project owner when you start Project scheduling you take time to finish it so everyday you can save it so that next day you can resume your work but in the middle of the scheduling work you wont want to show the data to your organization until- unless
you give it final touch .Once you complete it then only publish it so that it would be available to team members.
kirtesh
kirtesh -
PE2 - What's the difference between "cut" and "clear" in Project Assets?
When removing items from the Project Assets area, what's the difference between "cut" and "clear"?
Also I believe "delete" is an option at times, but I couldn't replicate it.Cut should Delete, but transfer that Clip to the Clipboard, where Clear will just Delete it completely - no transfer to Clipboard.
That can be tested by doing a Cut, then move the CTI (Current Timeline Indicator) to the end of the Timeline, and hit Ctrl+V (Paste). That Deleted Clip should appear after the CTI.
Then, clear (or choose a different Clip) the Clipboard, and try Clear. It should not Paste the Clip into the Timeline.
Good luck,
Hunt -
Differences between Oracle and SAP ERP
Hi All
I have a Industrial project which is currently having oracle.
I would like to give them a presentation on SAP ERP and its modules.
Does any1 have a ppt which highlights the advantages of SAP over Oracle. and stating its major differences.
Please send it ASAP.
Thanks and RegardsHi.......
Check this link :
The key difference between SAP and Oracle
http://searchsap.techtarget.com/news/article/0,289142,sid21_gci1294788,00.html
http://www.itjungle.com/two/two032807-story03.html
http://searchmanufacturingerp.techtarget.com/news/article/0,289142,sid193_gci1325932,00.html
Hope this helps you...........
Regards,
Debjani.......... -
The difference between N80 and N80IE ?
What is the difference between M80 and N80ie?
02-Jan-2007
07:45 PM
korngear wrote:
The Nokia N80 Internet Edition is a new version of this handset with the same hardware as the normal N80. It is due for release in Q4 of 2006 and will be available in Patina Bronze or Pearl Black, and has the following additional software included.
Yahoo Go! for Mobile
Flickr
Some Amazon Branded Software
'Download!' App management
Internet Telephone - SIP VOIP Frontend
WLAN Wizard
Gizmo VOIP - Gizmo Project VOIP Frontend.
\\en.wikipedia.org//
@Korngear
Thanks.
Could N80 be upgraded to N80IE? -
What is the difference between Oracle and MySQL
Hi,
I would like to know the major difference between Oracle and MySQL. I have a project to generate XML files from database tables, i have used oracle's built XML functions XMLELEMENT, XMLATTRIBUTES, XMLFOREST, XMLAGG. I really want to know if these functions (or) similar functions are supported/availabe in MySQL.
I am having a hard time to find out best linux distro for installing Oracle11g, so i am planning to switch to MySQL. Please help, Thanks in advance.Oracle_Walker wrote:
Hi,
<snip>>
I am having a hard time to find out best linux distro for installing Oracle11g, Then you must be "looking for love in all the wrong places."
What's so hard about finding a "best linux distro for installing Oracle11g"? The supported distros are listed in the fine Installation Guide for Linux. At the top of the list is Oracle's own Oracle Linux, which is in the same family as Red Hat.
so i am planning to switch to MySQL. Please help, Thanks in advance. -
What is the difference between avi and mov
Hi FCP users,
I am actually an audio guy, but I would like an answer on something.
I work with Logic, and usually use quicktime movies when I am working to movies. But I am working with a client who is an Avid user and swears by avi files. Can someone explain to me the difference. My client explained to me that avi's are better than mov files. He claims their file sizes are bigger, so therefore there quality is better. He said there is some form of compression on quicktime movies which lessen the quality to avi, even if the mov is uncompressed apparently the quality is still less than an uncompressed avi. If this is not true, could someone give me the real big difference between the two.
I thought is was more of a preference, like windows users prefer wav, and apple users like quicktime movies. Like with audio, there isnt a huge difference between aif and wav. Windows users prefer wav and apple users aif.
Thanks in advance for any information.gazo wrote:
The vid guy has sent me some files to work with. So I am working in Final Cut to edit some of the video, and then sending it back to him. He is working on PC with Avid. What is the best. Should I convert the avi files he has sent to me to mov files. Then pull these into FCP, and then export it out as avi for him. Or should I export out as mov, and then he converts them to avi when he pulls it into Avid on his PC? Very confusing which is the best procedure between Mac and PC.
Thanks in advance for any help.
This is a disaster in the making. You can avoid being part of the train wreck by either renting an Avid, going to live at his house, or telling him to get a Macintosh.
You must find the lowest common denominator video format that will work on both of your systems. That could be conventional DV, dunno, never used Avid and never tried to edit anything on a PC. But I can tell you this with absolute certainty, it will be easier and, in the end, much less expensive for one of you to adopt the other's platform for the duration of this project. The time you waste transcoding, arguing, formatting your drives, buying secondary products, fitting round pegs into square holes, and trying to find a workable solution (that will keep changing as the project gets more complicated) will cost you much more in terms of money out of pocket and creative frustration than simply buying/renting another station.
bogiesan -
Hello everybody,
I am absolutely a beginner in working with Captivate and furthermore my technological know how is not that good.
So, I have problems to understand if the export formats SWF and F4V are both capable to be published in the Internet as streaming video and as progressive Download? Well so, I do not really understand the difference between streaming and progessive download either?
Furthermore I was asking myself if this issue depends on how I imported flash videos (there are these two options) in my Captivate project during the production phase?
I would be very thankful for some helping information!
Greetings,
Mareike the beginnerWelcome to our community
I'm not certain I fully understand the differences myself, but will toss out what I believe to be true about the formats. Hopefully, if I'm incorrect in my bellief, someone with more definitive knowledge will chime in.
It was explained to me a couple of years back and is my understanding that "streaming" only applies to a video based format such as F4V, FLV and it doesn't apply to SWF. With SWF, you may specify a preload value. So when the SWF transmits from the web server to the PC, a certain percentage has to be received before play begins. But that's not streaming. It's preloading.
For streaming to occur, the web server establishes a communication channel between the server and the destination PC. This channel is monitored to see what speed is in use. Only enough information is then transmitted to be comfortable at that speed. If the speed improves during the connection, the server serves data at a faster rate. If the connection degrades, the information transmitted is also scaled back so as to accommodate the lower speed.
With SWF, after it has all been downloaded, a savvy user is able to poke around in their temporary internet files and save the SWF for play later. With streaming, this isn't possible because as the stream is viewed, it evaporates from memory.
Seriously hoping others will chime in here to confirm or deny this.
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks -
Difference between MBBS and MB5L report.
All capital inventory till FY-2008-09 was transferred to revenue inventory by movemnt typr 411-Q in MB1B.All the codes those were transferrd are now appearing in MBBS but with zero value. However these codes are appearing in MB5L with value under GL 132006 (for capital items) and having value of 1.08 crores (0.94 crore for imported items and 0.14 crore for revenue items). The GL for all these codes neds to be changed to 132000 (revenue inventory GL) so that in MB5L also these items appear as revenue items.As of today GL of all the codes appearing under GL 132006 are to be changed to 132000 except code 496700086.
now, changes are reflected in report MBBS but not showing correct information in MB5L report..
Please guide what is the difference between MBBS and MB5L report.
Regards
SHreyaHi,
MBBS gives stock values of "project'" and "sales order" only.
MB5L gives total stock value . -
Hi,
I've made a silent Office 2013 installer with /admin and put SP1 MSP's in the updates folder.
After deployment under installed updates it shows: Service Pack 1 for Microsoft Office 2013 (KB2817430) 32-Bit Edition
But when I check for new updates, "ServicePack 1 for Microsoft Office 2013 (KB2850036) 32-Bit Edition" is ready for download and install.
What is the difference between KB2817430 and KB2850036?
It seems that I cannot download KB2850036 and also integrate it in the silent installation.
Another question: Is the updates folder from Office only for servicepacks? or can I put also updates and patches MSP files in here? If yes then i've got a lot of files with the same name and different files sizes. For example After extracting SP1 I've got
the file "proofsp-en-us.msp" which is 10MB and when extracting another patch also i've got a proof-en-us.msp and is 8MB.
So which one need to go in the updates folder?
Can anyone help me out?
thanksHi,
As can be seen from below KB articles, KB2817430 only contains Service Pack 1 (SP1) for Office 2013, whereas KB2850036 also contains Service Pack 1 (SP1) updates for other Office 2013 related desktop products. For example, Microsoft Office 2013
Language Pack, Project 2013, SharePoint Designer 2013, Office Proofing Tools 2013, etc.:
https://support.microsoft.com/en-us/kb/2850036
https://support.microsoft.com/en-us/kb/2817430
So if you have any of these products on your computer, Windows Update might offer related updates to you.
Regarding the Updates folder issue, you can put any Office software updates in it during the initial installation, such as service packs or hotfixes. A newer patch might make changes to a specific file, you can check the version number of that file, and keep
the newer one in the folder.
Here is the reference you will need:
http://blogs.technet.com/b/office_resource_kit/archive/2011/05/05/using-the-updates-folder-to-deploy-software-updates-with-an-office-2010-installation.aspx
(Note, it was created against Office 2010, however the steps should hold good for Office 2013)
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
What are the major differences between BODS and Talend ?
Hi Friends,
We had a client meeting 2 days back regarding BODS project, But our client is showing more interest on Talend. We have explained/demo him on BODS. Could any one please tell me, What are the major differences between BODS and Talend ? What are the features of BODS which are not there in TELEND ?
Thanks,
Bheem.Hi,
If you talk difference than Talend is an open source. SAP DS as huge advantage when it comes to loading data into SAP and it is more flexible with lots of inbuilt features and easy to load data into SAP using DS directly and extracting data from various legacy systems. -
What is the difference between ojvm and client versions?
Changing the java vm from client to ojvm result in the following error:
Errormessage:
java.lang.UnsatisfiedLinkError: no UniqueC in java.library.path
Project Settings -> Configurations -> Development -> Runner -> Virtual Machine -> ojvm FAILS
Project Settings -> Configurations -> Development -> Runner -> Virtual Machine -> ojvm RUNS OK.
Project Settings -> Configurations -> Development ->Paths ->Additional Classpath:
C:\jars\xerces.jar;C:\jars\UniqueC.dll;C:\jars\log4j-1.2.8.jar
What is the difference between ojvm and client versions? How can I make ojvm to find UniqueC.dll?
Various version info:
Output from program:
java version:1.4.2_01
java home:C:\programfiler\JAVA\2sdk1.4.2_01\jre
java vm version:9.0.3.738 cdov
Taken from JDeveloper Help About:
Oracle IDE 9.0.3.10.35
UML Modelers Version 9.0.3.9.4
Business Components Version 9.0.3.10.7
java.version 1.3.1_02
java.vm.name OJVM Client VM
java.vm.version 9.0.3.738 oHowever, Adobe offers extra paid services to create PDF or to export PDF to other formats. You are not required to buy them, however.
-
What is the difference between upgradation and migration.
Hi Guru's
what is the difference between upgradation and migration.
actuallly i involved in upgradation project, here my role is
1. first i check the query's in 3.5 save the query and transport the query. and check the query in bex analyzer also.
2. go to BI .7 find the query;s ,give the query name and save the query ,
3. once save the query, again will come to 3.5 open the query , it will not open. this is my job here,
come to 7.0 check the query in analyzer also.
i am having littile bit confusion, how it will comes query in 7.0, why are u saving the query's in 3.5 and 7.0
query's already available in 7.0 why are u doing this work?
can i know the upgrades those objects, is it neccessary, if necessary how can i upgrade.
infoobje , transferrules, transferstructure ,infosoure, datasoure,updaterules, ods, cubes.
Points will be Assingned ,
Thanks & Regards
prabhavathiHi,
I was talking in a general sense not on a query level.
If your taling about migration in that level meaning as a part of larger upgradation (in your case 3.x to 7) there may be many places where you need to do this kind of activities.
Fr eg migration into new data flow, Migration of Web templates from BW 3.x to Netweaver 2004s, etc
Hope this helps.
Thanks,
JituK -
In the shared variable properties box, specifically with regard to a the target being an rt target, when enabling aliasing, what is the difference between binding to a project variable vs. to a psp url?
The difference is in the type of variable you are binding it to. A project variable is a variable that lives within the specific project in which it was created. A PSP URL is an address using the Publish-Subscribe Protocol (PSP). You can learn more about PSP URLs here: http://zone.ni.com/reference/en-XX/help/371361G-01/lvconcepts/using_datasocket_technology/#Specifyin...
PSP URLs will enable it to communicate between different machines and also between projects which may or may not be open. The project variable will exist within the project.
Julian R.
Applications Engineer
National Instruments -
What's the difference between jsp and jsf?
who can tell me what's the difference between jsp and jsf?
I'm puzzled when I found some of the technology in jsp is so similar to the ones in jsp( javaserver page)Hi,
Find the difference between JSP and JSF
1. A developer has more control with JSP, but (should) get easier development with JSF
2. Event handling is done differently in JSP (HTTP) and JSF (Java)
3. The UI is designed differently (or should be at least) with JSP (markup) and JSF (components).
4. The end product should also be defined differently - JSP page versus a JSF application.
Is this the only thing that is need to make a decision for either or? Probably not. There are other pieces that need to be taken in account when deciding which technology to use - tools support, enough components, type of application etc.... At this point there are not enough JSF components (although there are some interesting projects underway - Ajaxfaces, Myfaces, ADF Faces, and WebChart 3d) and enterprise tools support is still limited to a few tools vendor. Looking at our ADF Faces components they are currently available as early access (not production) and demands for these components are stacking up, literally, outside my office doorstep. Although I would love to make them production - now! - it is not a viable solution since we are still checking features and fixing critical bugs.
All this combined - not enough enterprise level components in production, lacking tools support etc... - leave customers in a vacuum where the decision is either to continue with JSP, since it is mature and has a wide developer base, or move forward with JSF not sure if the support, or the developers will be there. This is particularly sensitive to customers that need to get started now and be production by summer.
If you are in this vacuum here are some key points promoting JSF:
1. Fundamental unit is the Component
2. Built in event and state management
3. Component sets can be provided by any vendor
4. Closer to ASP.Net or Swing development
5. Choice of UI technology
6. Scale up (rich clients)
7. Scale down (mobile devices)
8. Built into J2EE containers in J2EE 5.0 (tentative)
Maybe you are looking for
-
I usually open a new browser window per subject, let's say I'm shopping online for something and open about 5 tabs for that, but in the same time I am working on 2 systems which are lookalike, but defenitely should not be mixed average 6 tabs open pe
-
How to back up time capsule with carbonite, how to back up time capsule with carbonite
how do you back up your time capsule with carbonite if you set it up as hardrive not as backup?
-
Proc*C/C++ suport for include files without .h extensions
We have written code C++ code which is Standard C++ ver 5.0 compilant. In this version of C++ compiler the files are without .h extensions. For example <iostream.h> is now to be reffered as <iostream>. We are facing problems in compiling this code wi
-
Hi ; I plan upgrade the uccx 7.x to uccx 8.02. Before doing so, i did install the uccx 8.02 in vmware virtual machine. For the 1st time login to uccx, i choose for the "upgrade from previous uccx release". But when it ask to load the license, i load
-
Modifier icône d'un exécutable sur PDA
Bonjour, Je développe actuellement un programme à l'aide du module LabVIEW PDA 8.2, et je souhaiterais personnaliser l'icône de l'exécutable. J'ai essayé la procédure définie dans ce lien http://digital.ni.com/public.nsf/allkb/AA87B627C42616C48625711