Difference between statistical update &document update in V1 or V2

Hi gurus,
i would like to konw difference between statistical update &document update in V1 or V2.Whats purpose of these actually.
thanks in advance.
sankarvas

Hi Shan,
Basically u use these Update types in LIS extraction. V1 stands for Synchronous update and V2 Stands for Asynchronous update.
Usually U use V1 for the time critical Updates and V2 for non-time crtical updates.
Usually u will go for Statistical update at the time of full update or Initialize with delta.
Regards-
MM

Similar Messages

Difference between those "Update DVD & Install DVD"

I have 2 Leopard DVD, 1 came with a new Macbook with Tiger install and the "Mac OS X Update DVD" and 1 bought at the store "Mac OS X Install DVD"
I've just reinstalled my MBP with the "Update DVD" (by mistake) and I select a full installation with a format.
Everything seem to run perfectly !
What is the difference between the "Update DVD" and the "Install DVD" ?
I think both are identical...
Thx

The OS installed is identical. The update DVD may not install on all systems, given it's not intended to be sold at retail. But once you have the OS installed, it's the same OS.

Difference between Maintenance update and recommended patches.

Hello
What is the difference between "Maintenance Update" and "Recommended patches" ?
Can we install the OS from the distribution, then install the recommended patches and have a decent system. Or we do need to install the maintenance update before the recommended patches ?

Hi,
What do you mean of Manual Update.
Simulation means , it will not upload into the data to the datatarget,It just explore you about how the system goes through update rules,Transfer rules .
real upload/Update manually means the data will reach the datatarget and sits there with out explore you about how the system goes through update rules,Transfer rules .
With rgds,
Anil Kumar Sharma .P

What is the difference between saving to "Documents" and "Macintosh HD" and when should you use each one?*

What is the difference between saving to "Documents" and "Macintosh HD" and when should you use each one?

When you save to the folder with the little house icon, the file is placed at
/Users/your_user_name/
You would really have to go out of my way to save at:
(the shortcut for the Boot Drive, regardless of its name).
I am not sure how you decided that Time Machine is not saving your files. The default is for Time Machine to do incremental Backups of everything on all attached drives, except for certain temporary information in Cache files. If you have four Users, Time Machine will back them all up.
Looking at the raw Time Machine backups will tell you very little, because it does lots of its work with Hard Links, and because it does incremental backups, so only files that changed since the last Backup are saved at thet cycle. The way to determine whether Time Machine is saving things is to display the window you care about in the Finder, then invoke the "Star wars"/ "Back, back, back in time" Interface.

Difference between Full Update V3 and V2

Hi Gurus
explain me briefly abt the difference between the full update V3 and V2..
pls post some links to understand in detail
regards
Prince

Hi Prince,
V1 Update: It is a Synchronous update. Here the Statistics update is carried out at the same time as the document update (in the application tables).
V2 Update: It is an Asynchronous update. Statistics update and the Document update take place as different tasks.
o V1 & V2 dont need scheduling.
Serialized V3 Update: The V3 collective update must be scheduled as a job (via LBWE). Here, document data is collected in the order it was created and transferred into the BW as a batch job. The transfer sequence may not be the same as the order in which the data was created in all scenarios. V3 update only processes the update data that is successfully processed with the V2 update.
FULL update, this will load everything which is there in the source system and then do INIT WITHOUT DATA TRANSFER to set the delta and schedule your delta loads accordingly.
Init Delta
You run an init delta from BW sytem using an info package .
Init delta will create an entry in R3 side table ROOSPRMSC with the filed init state with 'X' . Then upon this entry the system estbalishes a link between Extraction Queue . After succesfull initilization you can see the data source in RSA7 in R3 side . Then after this only you can extract data from the set up table .
Init Delta Types:
Init Delta
This will initialize the delta in R3 and exctract the set up table data into R3 . It is full update .
Init Delta without data transfer
This will only initialize the delta , No extraction takes place .
Use of init delta .
Without init delta you cannot schedule an Extraction . If you have initialized a delta , You can get delta reocrds from the succesive run in the delta Q .
When ever you need to do a extraction if for the first time you run a scheduler you will get
Full Update
Init Delta
Full Update =====> Init Delta + Extraction
Init Delta =======> Initialization first , Extarction
Init Delta Without data transfer ====> Only Initialize in RSA7 .
After the first Run u get ....Folowing in Scheduler
Full Update ,Delta Update .
Queued Delta: Document posting -->Appl table --> Stat table ---> 10,000 LUW ---> LBWQ ---> RSA7 ---> BW delta run delta into BW .
Here 10,000 Transaction is collected as 1 LUW and records moved to RSA7
In case of Queued delta LUW's are posted to Extractor Queue (LBWQ), by scheduling the V3 job we move the documents from Extractor queue to Delta Queue(i.e. RSA7) and we extract the LUW's from Delta Queue to BW side by running Delta Loads. Generally we prefer Queued Delta as it maintain the Extractor Log which us to handle the LUW's which are missed.
Direct Delta:
Document postings -> Appl table -> Stat tables --> RSA7 (Delta Queue ) ---> Using delta run delta come into BW .
Here each transaction is 1 LUW and each LUW is moved to RSA7 .
In case of Direct Delta LUW's are directly posted to Delta Queue(i.e. RSA7) and we extract the LUW's from Delta Queue to BW side by running Delta Loads. If we use Direct Delta it degrades the OLTP system performance because when LUW's are directly posted to Delta Queue (RSA7) the application is kept waiting untill all the enhancement code is executed.
Non-serialized V3 Update:With this update mode, the extraction data for the application considered is written as before into the update tables with the help of a V3 update module. They are kept there as long as the data is selected through an updating collective run and are processed. However, in contrast to the current default settings (serialized V3 update), the data in the updating collective run are thereby read without regard to sequence from the update tables and are transferred to the BW delta queue.
https://websmp102.sap-ag.de/~sapdownload/011000358700007535452002E/HOWTOCREATEGENERICDELTA.PDF (need id)
http://help.sap.com/saphelp_bw33/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/frameset.htm
Business Intelligence Performance Tuning [original link is broken]
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
How to load data
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
Delta Types and methods;&#57245;
Hope this helps.
****Assign Points if Helpful*****
Regards,
Ravikanth
Message was edited by:
Ravikanth.pnv

Execution time difference between SELECT & UPDATE statement in JDBC Sender.

Hi Experts,
In my scenario, I have used the JDBC Sender Adapter with the SELECT and UPDATE statement.
Now the problem is in between the execution of Select and update statement, few more entries are coming in the same DB Table.
So result of this is updation take place for those entries which are not even picked up by the select statement.
Can we avoid this execution time difference between the SELECT & UPDATE statemet on JDBC Sender side???
Thanks & Regards
Jagesh

Hi
Use serializable option in additional parameters, now all new entries would also be updated.

Difference between extensions.update.autoUpdateDefault and extensions.update.enabled

What is exactly the difference between these options? I have done a few tests but am not 100% sure. Currently I'm assuming extensions.update.enabled does only check for new versions of addons but it does not install them while extensions.update.autoUpdateDefault does only install addons if Firefox has already found a new version of them.
In this case setting only extensions.update.autoUpdateDefault to false would disable the automatic installing of addons and setting only extensions.update.enabled to false would disable the automatic searching for new addons which also implicitly disables the automatic installing of addons.
If my assumption is correct setting only extensions.update.enabled to false would be enough to disable any communication to an addon server.

Sworddragon said:
<blockquote>
Currently I'm assuming extensions.update.enabled does only check for new versions of addons but it does not install them while extensions.update.autoUpdateDefault does only install addons if Firefox has already found a new version of them.
</blockquote>
Your assumption seems to be confirmed in this Bugzilla thread from 2011 ('''''please do not post in the thread, it is for Mozilla developers only''''')- https://bugzilla.mozilla.org/show_bug.cgi?id=701987

What's the difference between firmware update 1.5 and 1.5.1?

i got the 1.5 update, but the newest one (1.5.1) does not show up in the SU which i am not concerned with... but what is the difference between the two versions of the update?

You're welcome. I have two other posts on the subject that should help.
They simply fixed the updater in 1.5.1 to include an update path for the ROM shipped with the models described above, of which my computer is one. Mine got the later update, so you and I essentially have the same ROM. I got fewer fixes since my ROM was slightly newer than yours to begin with.
Nate

Difference between the updates

sir,
What is the difference between 4.6,4.7 and 6.0.
Kindly explain me
thak u

Hi,
What exactly are you looking for? There are lots of differences between the three releases, technically, functionally and at the level of each module!
ECC 6.0 is based on Netweaver and is also ESoA enabled. Also one major difference for functional consultants is that all IS (Industry Solution) variants have been integrated into one system.
ERP 4.7 is called Enterprise Edition and is not fully ESoA enabled.
ERP 4.6x is the older version, and is now out of service.
If you want to know more differences, search for the link 'Release Notes' in http:
help.sap.com
Regards

Difference between clicking on document hyperlink and "Download a Copy" context menu

Hi,
Is there any difference between how SharePoint responds to clicking on a document hyperlink (in a document library) directly and clicking on the "Download a Copy" menu - to download a document from SharePoint? How does both work internally? Will
it make any difference to the analytics (for example, document viewed, etc).?
Rgds, N.T.GOPALAKRISHNAN

Hi Gopalakrishnan,
We are currently looking into this issue and will give you an update as soon as possible.
Thank you for your understanding and support.
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support

MIR7 u2013 Difference between Save Parked Document & Save as Completed.

Hi,
We are testing the T Code MIR7. When we click on Simulate, on the Simulation window, there are two buttons, Save Park Document & Save as competed. When we click Save Park Document, the system is displaying the following message:
The Tax Code is not valid.
The tax code entered is not defined in the country for this company.
Please note that we have maintained the Tax Code.
But when we click on the Save as competed, the system is giving us no error message and we are able to save (park) the document which is visible in Purchase Order History as Parked
And using T Code MIR4, we are posting the Document.
Is this the correct way?
And what is the difference between these two: Save Park Document & Save as competed.
Please guide.
Regards,

Check tax code assigned to country using FTXP.
Check program help documentation in t.code MIR7 itself for differences.

Anyone Know difference between pure Text Document and Plain Text Document?

I am having a **** of a time trying to figure out how to create a "text document" on the Mac. From what I've read, it's not possible to create a pure "text document" with Mac .... only possibly windows.
I have a text document (created in Textedit in Mac),that can only be saved as either a "plain text document" or a "rich text format (.RTF) formatted file.
I need to save (or re-create), the text file in a file that will save as a
"text document".
In either the <command+I> option, or in a folder window line description, I need to see the text file saved as the wording or a "rich text format (.RTF) .... and not "plain text document" or a "rich text format (.RTF).
Evidently, the difference between the text files that Apple TextEdit creates, and those that are a pure "text document", have something to do with the hidden carriage return command language at the end of the command lines ... or something like that.
The text file is being used as a command text file for a modified VTC Training "set-up folder/GUI" that will run on either Mac or Windows.
I have seen on-line, some mention that using windows "notepad" (texteditor) may be the only way to create a true "text document" labeled file.
Any suggestions, or knowledge in this area would be greatly appreciated.
Thanks! -David
Message was edited by: DavidMac

The way to preserve an existing "text document" is to import it into OS 9.2 and
open it up in Apple Simpletext (text edit program).
Changes can be made to the original "text document" (not an original .rtf or .txt file, which aren't true "text documents" by title description). When changes are made to the original "text document", they are saved in Simpletext as a "text document" (not .rtf or .txt - these are OSX file descriptions).
The file can be read back by OSX Textedit, or by PC, with no problems. However, if the slightest changes are attempted in OSX on that "text document" (once back from your OS 9.2 changes ... OSX will only be able to save it again as a .rtf or .txt (plain text file) ... not a pure "text document" as made or corrected in OS 9.2.
I'm glad I still have Apple OSX "Classic" available for these kind of rare changes needed.
I have spent a few weeks now, trying to figure how to create/modify an existing pure "text document" using a Mac ... without relying on going to any PC text edit programs ... and this method of running it through the old Simpletext program in OS 9 finally worked out to be the answer this evening!
Message was edited by: DavidMac

Difference between Invoice cancellation document and credit note document

Hello,
Can anybody highlight the differences between an invoice cancellation document and a credit note document (may be point by point).
I want to know their difference in SAP point of view.
Thanks,
Shankar

Hi,
Invoice Cancellation Document (VF11)
This is basically cancelling-out an existing Invoice, completely.
Whereas, Credit Note is basically setling down some part payment, which isn't being made or billed in excess to actual invoice amount.
Example:
Customer was supposed to be billed with Rs. 100 and got billed with Rs. 110. the payment recieved from customer is Rs. 100. to settle-down oustanding of Rs. 10, one need to create a credit note of Rs. 10 on customer-account.
Best Regards,
Amit

Difference between FOR UPDATE NOWAIT and no FOR UPDATE NOWAIT

Hi,
I have a quick question relating to the difference in SELECT statements and the use of FOR UPDATE NOWAIT.
Example:
If I query the following
SELECT * FROM ZX_LINES WHERE APPLICATION_ID = :B4 AND ENTITY_CODE = :B3 AND EVENT_CLASS_CODE = :B2 AND TRX_ID = :B1
/ with binds parsed, the result in Autotrace is as follows:
consistent gets     87
consistent gets - examination     2
consistent gets from cache     87
However, if I query the following
SELECT * FROM ZX_LINES WHERE APPLICATION_ID = :B4 AND ENTITY_CODE = :B3 AND EVENT_CLASS_CODE = :B2 AND TRX_ID = :B1
FOR UPDATE NOWAIT
/ the results in Autotrace are:
consistent gets     4341
consistent gets - examination     2
consistent gets from cache     4341
db block changes     5894
db block gets     5920
db block gets from cache     5920
So, I'm trying to understand why it happens that a FOR UPDATE NOWAIT requires so many more consistent gets, as opposed to not using a FOR UPDATE?

>
So, I'm trying to understand why it happens that a FOR UPDATE NOWAIT requires so many more consistent gets, as opposed to not using a FOR UPDATE?
>
The main difference is that when you use FOR UPDATE Oracle has to LOCK each row.
How many rows will your query return?
Did you notice that in the second example ALL of the consistent gets were from the cache?
Did you notice all of the block gets? And that ALL of them were from the cache?

Difference between regular update and update with execute immediate

Hi everyone, I have seen some code where developers have executed insert and update statement using execute immediate.
for example :
execute immediate ('Update employees set employee_salary = :x');
I can update record using the following statement where x is a number (salary)
update employee
set employee_salary = x;
It works fine as well
Whats the difference? and what way is recommended
Thanks

My guess is that sqlplus does a commit on exit:
In session 1:
SQL> create table test (col1 number);
Table created.
SQL> begin
2    execute immediate 'insert into test values (1)';
3 end;
4 /
PL/SQL procedure successfully completed.In session 2:
SQL> select * from test;
no rows selectedIn session 1:
SQL> exec execute immediate 'insert into test values (2)';
PL/SQL procedure successfully completed.In session 2:
SQL> select * from test;
no rows selectedIn session 1:
SQL> disconnect
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, Oracle Label Security, OLAP and Data Mining optionsIn session 2:
SQL> select * from test;
      COL1
         1
         2

Difference between statistical update &document update in V1 or V2

Similar Messages

Maybe you are looking for