Difference between tables statement and by using type statement

Hi all,
I need to know the difference between the two of the below statements
Tables spfli.
and
data spfli type spfli with header line.
As far as i know both seem same to me.
Thanks in advance,
Bala.

>
Bala Shanmuga Priyan wrote:
> Hi all,
>
> I need to know the difference between the two of the below statements
>
>
Tables spfli.
this will create a work area (spfli), looks like DB table spfli, but the statement is obsolate
Bala Shanmuga Priyan wrote:
>
data spfli type spfli with header line.
this will result in a syntax error, because this would also create a work area, but they cannot have header lines, so you should leave the WITH HEADER LINE addition.
To create work area use:
DATA : gw_spfli TYPE spfli.
To create internal table:
DATA : gt_spfli TYPE TABLE OF spfli.

Similar Messages

What's the difference between segment filtering and reduced message type

Hi gurus,
What's the difference between segment filtering and reduced message type? It seems they have the same functionality: Reduce the segment while idoc is generated.
Thanks in advance.

Hi,
BD53 is for IDoc Reduction.
this allows you to create a reduced message based upon a standard message type.If you want see mandatory fields. go to T-coe BD53 and give one standard messege type name and eg: matmas
there mandatory fields will be in Green color..
And BD56- This transaction is used to filter out segments of IDocs for combination of sender and receiver. This is usefull in scenarios where a standard IDoc with many segments is used but the receiving partner is only interested in some of the segments
the table related to this transation is TBD20
please go through below blog you have an idea abt that,
http://wiki.sdn.sap.com/wiki/display/ABAP/ReducedMessageTypes
http://saptotal.com/IDoc%20Segment%20Filtering.html
regards,
ganesh.

Difference between table CKMLKEPH and transaction figure of CKM3

Hi Gurus,
Having an issue in material ledger transaction and table data.
There is a difference between table CKMLKEPH and transaction figure of CKM3 for couple of periods.
Single level price difference for raw material domestic figure coming in transaction CKM3 is not matching with CKMLKEPH table.
Can you advice the tentative reason of it.
Thanks in advance,
MC.

Hi MC,
MLHELP_CCS_CONS_CHECK which check the actual CCS and the program
MLHELP_SPRICE_CCS_INIT for the standard CCS.
These programs are provided by the ML Helpdesk tool via note 364368.
Although these reports are used by SAP Support you can execute them in
test mode to verify your CCS data.
Regards,Declan

What is difference between table space and shchema

what is difference between table space and shchema ?

784633 wrote:
so each user has it own space of tables - schema ?yes, but let's clarify a bit ....
The "schema" is the collection of all objects owned by a particular user. So if user SCOTT creates two tables, EMP and DEPT, and a view EMP_RPT, and a procedure GET_MY_EMP, those objects (tables, views, procedures) collectively make up the SCOTT schema.
Those objects will be physically stored in a tablespace.
A tablespace is a named collection of data files. So tablespace USERS will be made up of one or more data files. A specific datafile can belong to one and only one tablespace. If a tablespace has more than one data file, oracle will manage those files as a collection invisible to the application - much like the OS or disk subsystem handles striping across multiple physical disks.
A specific object in the SCOTT schema can exist in only one tablespace, but not all objects of the schema have to be in the same tablespace. Likewise a tablespace can contain objects from multiple schemas.
and can one user to access tables of other users?As others have said - FRED can access tables belonging to SCOTT as long has SCOTT has granted that access to FRED.

Query on differences between table Icons and types in smartforms

Hello,
I have a question regarding the apparent differences between tables in smartforms.
I have noticed on some of the default smartforms that are supplied the table icon is the same as on the
'Create new session' button at the top of a Sap session window. The icon on a table that I am currently working on is like a 'spread sheet' design, a heading with columns, as shown in the current documentation. The way the two styles of tables work is different.
Is the difference down to the fact one was created in an older implementation of Sap?
The reason I ask is because the table I refered to initially, is easier when configuring cells.
Regards
Mike.

Hello Karthik
Thanks for taking the time to reply to my question.
The difference in the icons but with essentially the same function has always confused me since starting Smartforms.
Thank you for enlightening me.
I asked the question because the Complex node has a feature that I could have used. I have managed though to solve my problem using a table node.
Ten points awarded.
Best Regards
Mike Spear.

The difference between FIELD-SYMBOL and normal DATA TYPE

Dear experts,
Please see the example below, both are output the same result.
DATA: EXTERNAL_RECORD(4000),
      POSITION TYPE I,
      LENGTH TYPE N,
      ENTRY TYPE STRING.
EXTERNAL_RECORD = '0005Smith0007Edwards0005Young'.
DO.
LENGTH = EXTERNAL_RECORD+POSITION(4).
IF LENGTH = 0.
    EXIT.
ENDIF.
ADD 4 TO POSITION.
MOVE EXTERNAL_RECORD+POSITION(LENGTH) TO ENTRY.
WRITE ENTRY.
ADD LENGTH TO POSITION.
IF POSITION >= 4000.
    EXIT.
ENDIF.
ENDDO.
--OR It can be written as--
DATA: EXTERNAL_RECORD(4000),
      POSITION TYPE I,
      LENGTH TYPE N.
FIELD-SYMBOLS <ENTRY>.
EXTERNAL_RECORD = '0005Smith0007Edwards0005Young'.
DO.
LENGTH = EXTERNAL_RECORD+POSITION(4).
IF LENGTH = 0.
    EXIT.
ENDIF.
ADD 4 TO POSITION.
ASSIGN EXTERNAL_RECORD+POSITION(LENGTH) TO <ENTRY>.
WRITE <ENTRY>.
ADD LENGTH TO POSITION.
IF POSITION >= 4000.
    EXIT.
ENDIF.
ENDDO.
Is there any special circumstances we need to use FIELD-SYMBOL?
Why is FIELD-SYMBOL is introduce in the first place?
Kindly advice with example.
Thanks in advance for those who can help me on this.

HI,
You can use field symbols to make the program more dynamic. In this example the name of a table control is substituted by a field symbol. Thus you cal call the form with any internal table, using the name of the table control as a parameter.
Example
form insert_row
using p_tc_name.
field-symbols <tc> type cxtab_control. "Table control
assign (p_tc_name) to <tc>.
insert 100 lines in table control
<tc>-lines = 100.
Field symbols allow you to:
**     Assign an alias to a data object(for example, a shortened
        name for data objects structured through several hierarchies
        - <fs>-f instead of rec1-rec2-rec3-f)
**     Set the offset and length for a string variably at runtime
**     Set a pointer to a data object that you determine at runtime (dynamic ASSIGN)
**     Adopt or change the type of a field dynamically at runtime
**     Access components of a structure
**     (from Release 4.5A) Point to lines of an internal table
        (process internal tables without a separate work area)
Field symbols in ABAP are similar to pointers in other programming
languages. However, pointers (as used in PASCAL or C) differ from ABAP
field symbols in their reference syntax.
The statement ASSIGN f to <fs> assigns the field f to field
symbol <fs>. The field symbol <fs> then "points" to the
contents of field f at runtime. This means that all changes to the
contents of f are visible in <fs> and vice versa. You declare
the field symbol <fs> using the statement FIELD-SYMBOLS: <fs>.
Reference syntax
Programming languages such as PASCAL and C use a dereferencing symbol
to indicate the difference between a reference and the object to which
it refers; so PASCAL would use p^ for a pointer instead of p, C would
use *p instead of p. ABAP does not have any such dereferencing symbol.
**     In PASCAL or C, if you assign a pointer p1 to a pointer p2,
you force p1 to point to the object to which p2 refers (reference semantics).
**     In ABAP, if you assign a field symbol <fs1> to a field
symbol <fs2>, <fs1> takes the value of the data object to
which <fs2> refers (value semantics).
**     Field symbols in ABAP are always dereferenced, that is,
they always access the referenced data object. If you want to
change the reference yourself in ABAP, you can use the ASSIGN statement
to assign field symbol <fs1> to field symbol <fs2>.
Using field symbols
You declare field symbols using the FIELD-SYMBOLS statement.
They may be declared either with or without a specific type.
At runtime you assign a field to the field symbol using the ASSIGN
statement. All of the operations on the field symbol act on the field
assigned to it.
When you assign a field to an untyped field symbol, the field symbol
adopts the type of the field. If, on the other hand, you want to assign
a field to a typed field symbol, the type of the field and that of the
field symbol must be compatible.
A field symbol can point to any data object and from Release 4.5A,
they can also point to lines of internal tables.
The brackets (<>) are part of the syntax.
Use the expression <fs> IS ASSIGNED to find out whether the field
symbol <fs> is assigned to a field.
The statement UNASSIGN <fs> sets the field symbol <fs> so
that it points to nothing. The logical expression <fs>
IS ASSIGNED is then false. The corresponding negative expression
is IF NOT <fs> IS ASSIGNED.
An unassigned field symbol <fs> behaves as a constant with
type C(1) and initial value SPACE.
MOVE <fs>
TO dest     Transfers the initial value SPACE to the variable dest
MOVE 'A' to <fs>
Not possible, since <fs> is a constant
(runtime error).
To lift a type restriction, use the CASTING addition in the
ASSIGN statement. The data object is then interpreted as though
it had the data type of the field symbol. You can also do this
with untyped field symbols using the CASTING TYPE <type> addition.
The danger with pointers is that they may point to invalid areas.
This danger is not so acute in ABAP, because the language does not
use address arithmetic (for example, in other languages, pointer p
might point to address 1024. After the statement p = p + 10, it would
point to the address 1034). However, the danger does still exist, and
memory protection violations lead to runtime errors.
A pointer in ABAP may not point beyond a segment boundary. ABAP does
not have one large address space, but rather a set of segments.
Each of the following has its own segment:
*     All global data
*     All local data
*     Each table work area (TABLES)
*     Each COMMON PART
You should only let field symbols move within an elementary field or
structure where ABAP allows you to assign both within the global data
and beyond a field boundary.
Rgds
Umakanth

Difference between Table Maintenance and SE11

Hi all,
I want to know what is the difference between creating modifying table records using SM30 and creating modifying table records using SE11. As in Se11 itself we have the options for creating modifying Customer table records why we have to go for SM30.
Regards,
Kasi S

Check out these links
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_46c/helpdata/en/a7/5133ac407a11d1893b0000e8323c4f/frameset.htm
regards,
Santosh

Difference between drill down and filter using navigation attributes?

hi all,
can anyone let me know the difference between filter and drilldown options using navigational attributes. pls explain with examples for filter and drill down and how it varies.
thanxs
haritha

Jst to add up with an example :
Say you have a cost center variance analysis report with cost elements in the filter. ( not present in the default report result )
Filter - You can right click on a particular cost center & say " Keep Filter Value " - it will result in only showing that cost center & you can wish to select other filter value doing " Select Filter Value ".
Drill Down - If u wish to see the cost elements associated with cost centers you can right click on Cost Center & do " Drill Down To - Cost Element " or Drill Across.

Difference between Export QT and Export Using QT Conversion?

I am exporting video from FCE4 into iDVD, and can't understand the difference between Export QuickTime Movie and Export Using QuickTime Conversion.
The first is much faster, but the video seems to suffer in quality. Am I missing something?
Thanks!

"Export Using QuickTime Conversion" gives you many more options
(and many more ways of making mistakes); and it always recompresses.
Using "Export QuickTime Movie" gives you the option to uncheck
the "Recompress" box, which should produce a better result,
if you're not changing codecs.

Differences between Apple Mail and Outlook using EWS

I know that this issue has been beat to death, so I'm requesting some very specific information to help with troubleshooting. My work has an uncooperative IT department that has indicated if I do the research myself, they will see if they can fix whatever settings are off in Exchange.
Details:
I'm using 10.9.3 and trying to connect to an Exchange 2010 server. When using Outlook 2011, everything works perfectly, when using ActiveSync on iPhones and iPads, everything works perfectly, but everything fails when using Apple Mail.
When using AutoDiscover with Apple Mail, it sets both internal and external servers to webmail.domain.edu, which ends up not working. After some looking around, I set the internal server to xxx-xxx-xxx-02.domain.edu and it starts working perfectly, as long as I'm accessing from within the network. Accessing outside the network results in errors.
Connecting to the Exchange server from my school works perfectly.
So my question boils to: What Exchange Server 2010 or EWS settings may make it possible for Outlook 2011 to easily access anywhere, but Apple Mail to fail when AutoDiscover is used anywhere and fail when manual server information is entered and attempted to access outside the network? Absolutely any leads would be appreciated.
I've run Microsoft Remote Connectivity Analyzer and it's worked perfectly.
Relevant log portions from failures (with certain information scrubbed)
When AutoDiscover is used:
<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006>
    <Response>
        <Error Time="11:10:44.4955481" Id="1505556818">
            <ErrorCode>600</ErrorCode>
            <Message>Invalid Request</Message>
            <DebugData/>
        </Error>
    </Response>
</Autodiscover>
When internal server is manually entered and attempted to access outside the network (works inside the network)
2014-06-02 11:08:29.641 Mail[8898:9303] EXCHANGE -[SOAPRequest:0x7fe52f462c10 connection:didFailWithError:] https://domain%[email protected]/EWS/Exchange.asmx//domain%[email protected]/EWS/Exchange.asmx ERROR
NSURLErrorDomain -1003 A server with the specified hostname could not be found.
I'd love any brainstorming thoughts. Anything that could help me would be much appreciated. Thank you.

We are running Exchange 2013 here with auto discovery enabled. We have checked all the MS documentation and our auto discovery is stop correctly, auto discovery does work as the internal server is discovered however as the first post describes email isn't working with outside the internal network without a VPN connected. One of the guys is leaning towards it being a TLS issue but could just be a stab in the dark. I've got 3 people from our IT department as well as myself looking into the issue and if we find out what is actually going on, I'll post.

DIFFERENCE between Tabstrip control and tabstrin(with wizard)

difference between table control and table control wizard.
and what is all about custom control
give simple examples

Hi
Table Control
http://help.sap.com/saphelp_erp2005vp/helpdata/en/d1/802338454211d189710000e8322d00/frameset.htm
Table Control Wizard
http://help.sap.com/saphelp_erp2005vp/helpdata/en/d1/802338454211d189710000e8322d00/frameset.htm
Tab Strip
http://help.sap.com/saphelp_erp2005vp/helpdata/en/04/10f2469e0811d1b4700000e8a52bed/frameset.htm
Tab Strip wizard
http://help.sap.com/saphelp_erp2005vp/helpdata/en/04/10f2469e0811d1b4700000e8a52bed/frameset.htm
http://www.sapmaterial.com/tablecontrol_sap.html
Custom Controls
A custom control is an area on a screen. You create them in the Screen Painter, and, like all other screen objects, they have a unique name. You use custom controls to embed controls. A control is a software component on the presentation server, which can be either an ActiveX control or a JavaBean, depending on the SAPgui you are using. They allow you to perform tasks, such as editing texts, locally on the presentation server. The control is driven by the application logic, which still runs on the application server.
The SAP Control Framework
The controls on the presentation server and the ABAP application programs on the application server communicate using the Structure link SAP Control Framework. This is programmed in ABAP Objects, and contains a set of global classes that you can find in the Class Browser under Basis ® Frontend services. These classes encapsulate the communication between the application server and presentation server, which is implemented using Remote Function Call.
All application controls are encapsulated in a global class. You can find the SAP Basis controls in the Class Browser under Basis ® Frontend Services or Basis ® Component Integration. Programs that use controls on a screen work with the methods and events of the global classes that encapsulates them.
Container Controls
Before you can work with a custom control on a screen, you must assign a Structure link SAP Container Control to it. Container controls are instances of special global classes from the SAP Control Framework. The global class for custom controls is called CL_GUI_CUSTOM_CONTAINER. To link a custom control to a container control, pass the custom control name to the CONTAINER_NAME parameter of the container control constructor when you instantiate it.
As well as using custom containers, you can link controls to a screen using a SAP Docking Container. This is encapsulated in the global class CL_GUI_DOCKING_CONTAINER. The SAP Docking Container does not place the control within a screen. Instead, it attaches it to one of the four edges. You can nest containers. For example, you can use the SAP Splitter Container (classes CL_GUI_EASY_SPLITTER_CONTAINER or CL_GUI_SPLITTER_CONTAINER) within other containers. This allows you to split a custom control or docking control into more than one area, allowing you to embed more than one control.
One example,
program z.
Constants *
constants: c_me like trdir-cnam value 'VNDOVV',
c_myurl type scarr-url value
'http://www.brainbench.com/transcript.jsp?pid=147699',
c_width type i value 260,
c_height type i value 130.
Types *
types: begin of t_pgm,
year(4) type c,
name like trdir-name,
end of t_pgm,
begin of t_pgmkey,
id type i,
name like trdir-name,
end of t_pgmkey.
Data *
data: it_pgmkey type table of t_pgmkey.
Classes *
Definitions *
class screen_init definition create private.
public section.
class-methods init_screen returning value(this)
type ref to screen_init.
methods constructor.
private section.
class-data a_id type i.
data: splitter_h type ref to cl_gui_splitter_container,
splitter_v type ref to cl_gui_splitter_container,
picture type ref to cl_gui_picture,
tree type ref to cl_gui_simple_tree.
methods: fill_tree,
fill_picture.
endclass.
class screen_handler definition.
public section.
methods: constructor importing container
type ref to cl_gui_container,
handle_node_double_click
for event node_double_click
of cl_gui_simple_tree
importing node_key,
handle_picture_double_click
for event picture_dblclick
of cl_gui_picture.
private section.
data: html_viewer type ref to cl_gui_html_viewer,
editor type ref to cl_gui_textedit.
methods: fill_html,
fill_src importing programid type trdir-name.
endclass.
Implementations *
class screen_init implementation.
method init_screen.
data screen type ref to screen_init.
create object screen.
this = screen.
endmethod.
method constructor.
data: events type cntl_simple_events,
event like line of events,
event_handler type ref to screen_handler,
container_left type ref to cl_gui_container,
container_right type ref to cl_gui_container,
container_top type ref to cl_gui_container,
container_bottom type ref to cl_gui_container.
create object splitter_h
exporting
parent = cl_gui_container=>screen0
rows = 1
columns = 2.
call method splitter_h->set_border
exporting border = cl_gui_cfw=>false.
call method splitter_h->set_column_mode
exporting mode = splitter_h->mode_absolute.
call method splitter_h->set_column_width
exporting id = 1
width = c_width.
container_left = splitter_h->get_container( row = 1 column = 1 ).
container_right = splitter_h->get_container( row = 1 column = 2 ).
create object splitter_v
exporting
parent = container_left
rows = 2
columns = 1.
call method splitter_v->set_border
exporting border = cl_gui_cfw=>false.
call method splitter_v->set_row_mode
exporting mode = splitter_v->mode_absolute.
call method splitter_v->set_row_height
exporting id = 1
height = c_height.
container_top = splitter_v->get_container( row = 1 column = 1 ).
container_bottom = splitter_v->get_container( row = 2 column = 1 ).
create object picture
exporting parent = container_top.
create object tree
exporting parent = container_bottom
node_selection_mode =
cl_gui_simple_tree=>node_sel_mode_single.
create object event_handler
exporting container = container_right.
event-eventid = cl_gui_simple_tree=>eventid_node_double_click.
event-appl_event = ' '. "system event, does not trigger PAI
append event to events.
call method tree->set_registered_events
exporting events = events.
clear: event, events[].
event-eventid = cl_gui_picture=>eventid_picture_dblclick.
event-appl_event = ' '. "system event, does not trigger PAI
append event to events.
call method picture->set_registered_events
exporting events = events.
set handler: event_handler->handle_node_double_click for tree,
event_handler->handle_picture_double_click for picture.
call method: me->fill_picture,
me->fill_tree.
endmethod.
method fill_picture.
call method:
picture->load_picture_from_sap_icons exporting icon = '@J4@',
picture->set_display_mode
exporting display_mode = picture->display_mode_fit_center.
endmethod.
method fill_tree.
data: node_table type table of abdemonode,
node type abdemonode,
w_pgm type t_pgm,
w_cdat type rdir_cdate,
it_pgm type table of t_pgm,
w_pgmkey type t_pgmkey.
clear: a_id, it_pgmkey[].
select distinct name cdat from trdir into (w_pgm-name, w_cdat)
where cnam = c_me.
w_pgm-year = w_cdat(4).
append w_pgm to it_pgm.
clear w_pgm.
endselect.
sort it_pgm.
node-hidden = ' '. " All nodes are visible,
node-disabled = ' '. " selectable,
node-isfolder = 'X'. " a folder,
node-expander = ' '. " have no '+' sign for expansion.
loop at it_pgm into w_pgm.
at new year.
node-node_key = w_pgm-year.
clear node-relatkey.
clear node-relatship.
node-text = w_pgm-year.
node-n_image = ' '.
node-exp_image = ' '.
append node to node_table.
endat.
at new name.
add 1 to a_id.
node-node_key = w_pgmkey-id = a_id.
w_pgmkey-name = w_pgm-name.
node-relatkey = w_pgm-year.
node-relatship = cl_gui_simple_tree=>relat_last_child.
node-text = w_pgm-name.
node-n_image = '@0P@'.
node-exp_image = '@0P@'.
append w_pgmkey to it_pgmkey.
endat.
append node to node_table.
endloop.
call method tree->add_nodes
exporting table_structure_name = 'ABDEMONODE'
node_table = node_table.
endmethod.
endclass.
class screen_handler implementation.
method constructor.
create object: html_viewer exporting parent = container,
editor exporting parent = container
wordwrap_mode =
cl_gui_textedit=>wordwrap_at_fixed_position
wordwrap_position = 72.
call method: fill_html,
editor->set_readonly_mode exporting readonly_mode = 1.
endmethod.
method handle_node_double_click.
data: w_name type programm,
w_id type i,
w_year(4) type c,
w_pgmkey type t_pgmkey.
w_name = node_key+4.
w_id = w_name.
clear w_name.
read table it_pgmkey into w_pgmkey with key id = w_id
binary search.
if sy-subrc = 0.
w_name = w_pgmkey-name.
endif.
w_year = node_key(4).
if w_name is initial.
call method: fill_html,
html_viewer->set_visible exporting visible = 'X',
editor->set_visible exporting visible = ' '.
else.
call method: fill_src exporting programid = w_name,
editor->set_visible exporting visible = 'X',
html_viewer->set_visible exporting visible = ' '.
endif.
call method cl_gui_cfw=>flush.
endmethod.
method handle_picture_double_click.
call method: fill_html,
html_viewer->set_visible exporting visible = 'X',
editor->set_visible exporting visible = ' '.
call method cl_gui_cfw=>flush.
endmethod.
method fill_html.
call method html_viewer->show_url exporting url = c_myurl.
endmethod.
method fill_src.
types t_line(72) type c.
data src type table of t_line.
read report programid into src.
call method: editor->delete_text,
editor->set_text_as_r3table exporting table = src[].
endmethod.
endclass.
Data *
data this_screen type ref to screen_init.
Program execution *
load-of-program.
call screen 100.
Dialog Modules PBO *
module status_0100 output.
set pf-status 'SCREEN_100'.
set titlebar 'TIT_100'.
this_screen = screen_init=>init_screen( ).
endmodule.
Dialog Modules PAI *
module cancel input.
leave program.
endmodule.
Reward if usefull

Difference between pack/unpack and T2P (copyConfig/copyBinary)

Hi Experts,
I have a requirement to clone WLS 10.3.3 running SOA and OHS. I am facing some issues (encountering NPE on running copyBinary.sh and extractMovePlan.sh file is missing) while doing T2P for OHS. I see pack.sh and unpack.sh can be used to make WLS domain templates and create new domains on different machines/hosts.
Please let me know what is the difference between the two approaches T2P and pack.sh/unpack.sh. Also please suggest which is the recommended approach.
Note: I am new to WLS, so please don't mind if my question is trivial or doesn't make sense.
Thanks
Rathnam

Below is the Stack Trace for NPE:
=======================================================================================
Null Point Exception Error:
bash-3.2$ /than8o/fmw/product/111/oracle_common/bin/copyConfig.sh -javaHome /than8o/fmw/jrmc-4.0.0-1.6.0 -al /ptsadmin/FMW_clone/config/OHS_CopyConfig.jar -sourceInstanceHomeLoc /than8o/fmw/product/111/ohs_instances -sourceComponentName ohs1
Log File: "/tmp/CLONE2012-09-19_03-56-21PM-LOG/CLONE2012-09-19_03-56-21PM.log".
Error File: "/tmp/CLONE2012-09-19_03-56-21PM-LOG/CLONE2012-09-19_03-56-21PM.error".
To proceed, type "yes":yes
INFO : Sep 19, 2012 3:19:23 PM - CLONE-21095 Create archive for instance1@ohs1 started ...
java.lang.NullPointerException
at oracle.as.clone.classloader.CloningFrameworkClassLoader.getClonableEntityTypes(CloningFrameworkClassLoader.java:162)
at oracle.as.clone.classloader.CloningFrameworkClassLoader.<init>(CloningFrameworkClassLoader.java:254)
at oracle.as.clone.classloader.CloningFrameworkClassLoader.getInstance(CloningFrameworkClassLoader.java:222)
at oracle.as.clone.cloner.component.ComponentCreateCloner.doClone(ComponentCreateCloner.java:66)
at oracle.as.clone.cloner.Cloner.doFinalClone(Cloner.java:56)
at oracle.as.clone.request.CreateGenericArchive.doGenericArchive(CreateGenericArchive.java:128)
at oracle.as.clone.request.CreateCloneRequest._clone(CreateCloneRequest.java:69)
at oracle.as.clone.process.CloningExecutionProcess.execute(CloningExecutionProcess.java:145)
at oracle.as.clone.process.CloningExecutionProcess.execute(CloningExecutionProcess.java:128)
at oracle.as.clone.client.CloningClient.executeCloneCommand(CloningClient.java:123)
at oracle.as.clone.client.CloningClient.main(CloningClient.java:83)
oracle.as.clone.exception.FMWCloningException: java.lang.NullPointerException
at oracle.as.clone.classloader.CloningFrameworkClassLoader.getInstance(CloningFrameworkClassLoader.java:227)
at oracle.as.clone.cloner.component.ComponentCreateCloner.doClone(ComponentCreateCloner.java:66)
at oracle.as.clone.cloner.Cloner.doFinalClone(Cloner.java:56)
at oracle.as.clone.request.CreateGenericArchive.doGenericArchive(CreateGenericArchive.java:128)
at oracle.as.clone.request.CreateCloneRequest._clone(CreateCloneRequest.java:69)
at oracle.as.clone.process.CloningExecutionProcess.execute(CloningExecutionProcess.java:145)
at oracle.as.clone.process.CloningExecutionProcess.execute(CloningExecutionProcess.java:128)
at oracle.as.clone.client.CloningClient.executeCloneCommand(CloningClient.java:123)
at oracle.as.clone.client.CloningClient.main(CloningClient.java:84)
Caused by: java.lang.NullPointerException
=======================================================================================
Basically I am looking at knowing the difference between pack/unpack and T2P using copyConfig/copyBinary/extractMovePlan.
Thanks
Rathnam

Difference between Table and Table Type

Hi
Can you please let me know the
Difference between Table and Table Type and
Difference between Structure and Table Type?
Regards,
Sree

hi,
table is a data dictionary object in sap. table is of different types
1. transparent tables
2. pool tables
3. cluster tables
table type gives option for u to select different types of internal tables. they r
1. standard table
2. sorted table
3. hash table
Structures :
-Defined like a table and can then be addressed from ABAP programs.
-Structures contain data only during the runtime of a program.
-Just like user-defined data type.
- they are not present in database server and only on application server.
if helpful reward some points.
with regards,
Suresh Aluri.

Difference between work area and internal tables.

Hi I wanna know the difference between work area and internal tables.
what happend if i give with out header line in internal table.
also how to assosiate work area to internal table in that scenario.

Hi Balaji..
The internal table is an ABAP runtime object which has two parts the Body and the header.
Whereas a work area cannot have a body.. It is mere a field or group of fields which can hold values at runtime..
In the SAP higher versions mySAP ERP, the use of tables with header line is made obsolete.. But there is absolutely no problem with the same..
Just think that when you define an internal table with occurs or with header line statement, the system automatically creates a workarea with this table, using which you can access the contents in the bosy of tyhe table.. You can read a record from the table body to this header or add a record in the header to the internal table body..
When you work with a table ITAB without a header line, you can not use statements like READ TABLE, APPEND, INSERT etc without giving an explicit work area..
Suppose i have an internal table like:
DATA : itab TYPE STANDARD TABLE OF t001.
This table will not have a header with it.
If you will use APPEND itab. The compilor will give error.
Here i will create a work area with same structure of the table.
DATA : e_wa TYPE t001.
Now i will write:
APPEND e_wa TO itab.
READ TABLE itab INTO e_wa WITH KEY xxxxxx
LOOP AT itab INTO e_wa... etc..
In a better approach we use Field symbols with such tables, instead of structures
FIELD-SYMBOLS: <fs_itab> TYPE t001.
So,
LOOP AT itab ASSIGNING <fs_itab>
READ TABLE itab ASSIGNING <fs_itab> etc.. However we can not use field symbols in few cases..
I hope this will help you..
Thanks and Best Regards,
Vikas Bittera.
**Points for usefull answers**

What is the difference between standard,sorted and hash table

<b>can anyone say what is the difference between standard,sorted and hash tabl</b>

Hi,
Standard Tables:
Standard tables have a linear index. You can access them using either the index or the key. If you use the key, the response time is in linear relationship to the number of table entries. The key of a standard table is always non-unique, and you may not include any specification for the uniqueness in the table definition.
This table type is particularly appropriate if you want to address individual table entries using the index. This is the quickest way to access table entries. To fill a standard table, append lines using the (APPEND) statement. You should read, modify and delete lines by referring to the index (INDEX option with the relevant ABAP command). The response time for accessing a standard table is in linear relation to the number of table entries. If you need to use key access, standard tables are appropriate if you can fill and process the table in separate steps. For example, you can fill a standard table by appending records and then sort it. If you then use key access with the binary search option (BINARY), the response time is in logarithmic relation to
the number of table entries.
Sorted Tables:
Sorted tables are always saved correctly sorted by key. They also have a linear key, and, like standard tables, you can access them using either the table index or the key. When you use the key, the response time is in logarithmic relationship to the number of table entries, since the system uses a binary search. The key of a sorted table can be either unique, or non-unique, and you must specify either UNIQUE or NON-UNIQUE in the table definition. Standard tables and sorted tables both belong to the generic group index tables.
This table type is particularly suitable if you want the table to be sorted while you are still adding entries to it. You fill the table using the (INSERT) statement, according to the sort sequence defined in the table key. Table entries that do not fit are recognised before they are inserted. The response time for access using the key is in logarithmic relation to the number of
table entries, since the system automatically uses a binary search. Sorted tables are appropriate for partially sequential processing in a LOOP, as long as the WHERE condition contains the beginning of the table key.
Hashed Tables:
Hashes tables have no internal linear index. You can only access hashed tables by specifying the key. The response time is constant, regardless of the number of table entries, since the search uses a hash algorithm. The key of a hashed table must be unique, and you must specify UNIQUE in the table definition.
This table type is particularly suitable if you want mainly to use key access for table entries. You cannot access hashed tables using the index. When you use key access, the response time remains constant, regardless of the number of table entries. As with database tables, the key of a hashed table is always unique. Hashed tables are therefore a useful way of constructing and
using internal tables that are similar to database tables.
Regards,
Ferry Lianto

Difference between tables statement and by using type statement

Similar Messages

Maybe you are looking for