Difference Between "The speed coming into your hou...

Hi,
I've just run the BT speed test and received the following figures:
The speed coming into your house: 21.4Mb
The speed you get at your computer:
Download speed 7.8Mb
Upload speed 0.99Mb
The computer is connected directly to a HH4 via ethernet cable and the figures above are for only this PC connected (with gigabit NIC and into the gigabit socket on the HH. (No other software running etc.)
Can anyone tell me how I could go about increasing the download figure?
Is the delay likely to between the outside line and the HH or between the HH and the PC?
Many thanks.
Solved!
Go to Solution.

Thanks for the very quick reply imjolly.
The lines from the log read:
17:23:19, 28 Nov.
(17770.250000) DSL noise margin: 5.80 dB upstream, 3.10 dB downstream
17:23:18, 28 Nov.
(17769.230000) DSL line rate: 1168 Kbps upstream, 20834 Kbps downstream
Interestingly, the speeds on the speed test page show 7.77 download / 0.99 upload / 36.25 ping. (The speed test page at: http://diagnostics.bt.com/login/?workflow=Speed is showing 20.8 from the exchange and 7.76 at the PC)
The results of the diagnostic test are:
FAQ
1. Best Effort Test: -provides background information.
Download Speed
7.77 Mbps
0 Mbps
7.15 Mbps
Max Achievable Speed
Download speedachieved during the test was - 7.77 Mbps
For your connection, the acceptable range of speeds is 2 Mbps-7.15 Mbps.
IP Profile for your line is - 7.15 Mbps
2. Upstream Test: -provides background information.
Upload Speed
0.99 Mbps
0 Mbps
0.83 Mbps
Max Achievable Speed
Upload speed achieved during the test was - 0.99Mbps
Additional Information:
Upstream Rate IP profile on your line is - 0.83 Mbps
I'm connected directly via a filter to the test socket and the master is the only phone socket in the house.
The quiet line test sounds quiet! (No crackling or background noise).
Hope this is all you needed. Thanks again.

Similar Messages

TS3899 Why is the number of e-mails higher on my iPhone than in my e-mail when I log into it on my computer? The difference between the 2 keeps climbing.

Why is the number of e-mails higher on my iPhone than in my e-mail when I log into it from my computer? And how do I fix it? The number keeps climbing on my phone, making the difference between the two greater.

You're welcome.
In order to have the account's Sent mailbox synchronized with the server with the Mail.app on your Mac and with the iPhone's Mail application, you must store the account's Sent mailbox on the server with each. The same applies to the account's Drafts and Trash mailboxes.
With store sent messages on the server deselected for the account preferences with the Mail.app on your Mac, create an "On My Mac" location mailbox. At the Mail.app menu bar go to Mailbox and select New Mailbox. Choose On My Mac for the mailbox location - which will be stored locally on your computer's hard drive and enter a name for the mailbox. You can name this mailbox MobileMe Sent. Select OK to create the mailbox, which will be available under "On My Mac" in the Mail.app mailboxes drawer.
Select your MobileMe Sent mailbox. Select a sent message in the mailbox and at the menu bar go to Edit and choose Select All. Follow this - at the Mail.app menu bar go to Message and select Move To and then select the new On My Mac location mailbox in the window provided. This will move all messages from the account's locally stored sent mailbox to the newly created On My Mac location mailbox. When this transfer has been completed, re-select store sent messages on the server for the account preferences.
Now do the same with the newly created On My Mac location mailbox where all sent messages were transferred to. Select a message in the mailbox and at the menu bar go to Edit > Select All. At the menu bar go to Message > Move To and select your MobileMe account's server stored Sent mailbox under Sent in the window provided. This will transfer all messages stored locally on your computer's hard drive from the newly created "On My Mac" location mailbox to the account's server stored Sent mailbox. These messages will no be available when accessing the account with the iPhone's Mail application.

Hey guys, I was wondering ... is there a big difference between the 16 gig ram and the 8 gig for the retina series?? hardest thing I do on a laptop is play need for speed on 1080p resolution.... thanks

hey guys I was wondering ... will there be a big difference between the 8 gig and 16 gig versions of the pro retina series??? the hardest thing i do is play need for speed and program using c++...thanks

That RAM is soldered in. No sockets. No upgrading later.
Your question is:
¿Will I EVER need the 16GB in the time I expect to own this MacBook?
--NO, save $200 and if you ever run short, sell the machine and buy a different one.
--ELSE, spend the extra US$200 and don't think about it again.

HT3696 How to know if your mac is using the latest Haswell architecture processor or not? and how to know the difference between the new imac and the 2012/13 imac?

How to know if your mac is using the latest Haswell architecture processor or not? and how to know the difference between the new imac and the 2012/13 imac?

Sorry to reopen an old post, but I've just purchased a 2nd hand late-2013 iMac (or so thats what the seller said).
I'm always sceptical though, and just wanted to know if there is a way to check if my iMac is indeed the late-2013 model that included Haswell?
I've attached screenshots of the About This Mac section hoping it may help shed some light.
Thank you in advance for your help!
PS - I can't compare to the iMac specs link you posted above because its now showing the late-2014 models.
<Image Edited by Host to Remove Serial Number>

Is there much speed difference between the iMacs?

Just wondering, if there is any noticeable performance difference between the 1.83 - the 2.0 and the 2.16?
I'd be surprised to learn that there was (and also, keenly interested to learn).
My experience is that a dual processor is noticeably more capable than a single processor (regardless of minor increments at the end of the processor number).
Anyone?

You are right that it is more about futher differentiating the models than anything else. The speed difference is negligible, but a nice plus is you choose a larger display. Typically you also get a larger standard HD and maybe a better video card and if you add all those things up, the price difference is worth it.

What's the difference between the ssd and hd?

I'm in the process of buying a Mac book pro but wanted to know and understand What's the difference between the ssd and hd?

DDHeadley wrote:
What's the difference between the ssd and hd?
HD = hard drive, several metal platters stacked and data read/written magnetically.
Pro's - less expensive and higher capacity of storage. Can scrub the drive of unwanted data. Unlimited write capability.
Con'- bit rot can cause data and operating system to not be as reliable, mechanical moving parts means you can't move the machine while it's on.
SSD = Solid State Disk, basically memory chips that can store data in a permanent fashion without power (like Random Access Memory needs)
Pro's - faster read/write speeds in most cases. Shock resistant makes them ideal for portable uses.
Con's - new technology issues, one cannot securely erase the data on them, unless it's ground into a fine powder. Limited write capability means they will wear out eventually like USB thumb drives do. Wear leveling (TRIM) is used to spread the writes evenly across the drive to maximize it's lifespan.
If you can respect the machine, take care of it and not move it while it's on, or need to scrub the drive of unwanted data, or need higher capacity of storage without paying a fortune for a very large SSD, then a HD makes a lot of sense.
It really comes down to your privacy, do you want a machine you cannot delete files off of?
Do you want to carry around a machine that has all your dirty secrets etched in it for anyone with the right software to uncover?
A computer is a personal machine, why it's called a Personal Computer. We all do things we sometimes are later ashamed of and want to erase all memory of it.
Can't do that with a SSD, it knows all and you will be forced to destroy the machine to rid it of the unwanted data.

Difference Between the grouped column

Hi ,
I have matrix based report in which the columns are dynamically generated based on the month and year.
3 filter value in the report
quarter,
year and
Previous 12 months .
Katherine community moderator reporting services helped me achieving the with a similar kind of report. Due to some difference from the previous requirement am posting a new question .
Current Matrix Outcome :
Desired Outcome
Please note that the Month columns are dynamically generated so for example if the filter value is quarterly
3 months will be generated , march-14,april-14,may-14 and then i need to display the difference
in new columns like march-14 - april-14 ,april-14-may-14. The column headers of the new differential columns i can achieve
but the difference between the types on monthly basis am unable to achieve.
Similarly it goes for the yearly and previous 12 months filter value.
Kindly let me know if more detail is required .
Thanks
Priya

Hi Priya,
According to your description, you have a matrix in your report. Now for each month, you want to always get the difference value between current month and previous month with columns generated. Right?
In Reporting Service, if we want to compare values of two adjacent columns in a matrix, the best way is using custom code to deal with the logic. In this scenario, we want to compare the current value with previous value. The difference value is always along
with columns generated. So we suggest put this column inside of group instead of appending them at the end of the matrix. In this column, we can call the function defined in the custom code. We have tested this case in our local environment. Here are steps
and screenshots for your reference:
Put the custom code into report:
Private queueLength As Integer = 2
Private queueSum As Double = 0
Private queueFull As Boolean = False
Private idChange As String=""
Dim queue As New System.Collections.Generic.Queue(Of Integer)
Public Function CumulativeQueue(ByVal currentValue As Integer,id As String) As Object
Dim removedValue As Double = 0
If idChange <> id then
ClearQueue()
idChange = id
queueSum = 0
queueFull = False
CumulativeQueue(currentValue,id)
Else
If queue.Count >= queueLength Then
removedValue = queue.Dequeue()
End If
queueSum += currentValue
queueSum -= removedValue
queue.Enqueue(currentValue)
If queue.Count < queueLength Then
Return Nothing
ElseIf queue.Count = queueLength And queueFull = False Then
queueFull = True
Return (queueSum-currentValue-currentValue)
Else
Return (queueSum-currentValue-currentValue)
End If
End If
End Function
public function ClearQueue()
Dim i as Integer
Dim n as Integer = Queue.Count-1
for i=n To 0 Step-1
queue.Dequeue()
next i
End function
Create a matrix based on your information. Put expression into corresponding position.
A: =Code.CumulativeQueue(Fields!Amount.Value,Fields!Type.Value)
B: =IIF(Previous(Fields!Month.Value) is nothing,"",MonthName(IIF(Previous(Fields!Month.Value) is nothing,1,Previous(Fields!Month.Value)))&" - "&MonthName(Fields!Month.Value))
C: =MonthName(Fields!Month.Value)
Ps : You may need to modify the custom code and expression based on the data type in your dataset.
Create parameter for filtering data.
Save and preview. It looks like below:
Reference:
SSRS 2008 R2 - Add moving average to column group
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Whats the difference between the Flash Player runtime and Adobe AIR runtime?

Hey all. I've been into coding for about 5 years now, but I'm a recent convert to Flash development. One of the questions I have at the moment is, considering that SWF files can be run by either Adobe Flash Player OR Adobe AIR, what's the real difference between the two runtime environments? What API's and Objects exist in one environment, but not the other?
Basically what I'm more or less trying to establish is, when would I want to develop an SWF for AIR, and when would I want to develop for Flash Player, considering that Flash Player can also execute locally (providing support for creating "desktop applications").
Thanks in advance,
Jay.

Main Difference for the user: he also has to install the AIR runtime, that is about 15MB (Flash Plugin won`t do the job alone).
The market penetration for AIR is way below that of flash, so your user needs a good reason to install the Runtime
Also the System requirements are much more harder, you can`t use an Air application in XPSP1 for example.
As a rule of thumb you could say: Use Air, if you want to have the user something saved locally, with AIR you have the possibility to write any fileformat to hard disk, with flash you can only use so called Local shared objects

DIFFERENCE BETWEEN THE FULL AND BULK-LOGGED RECOVERY MODEL

DIFFERENCE BETWEEN THE FULL AND BULK-LOGGED RECOVERY MODEL

In bulk logged recovery mode certain bulk operations are minimally logged. In FULL recovery mode these are fully logged. These bulk operations are as mentioned below
1. SELECT INTO
2. BULK IMport operations including BULK INSERT and BCP
3. INSERT INTO SELECT command using the OPENROWSET(BULK) function
4. Partial updates to columns having large value data type
5. Using WRITE clause in UPDATE statements
6. Index operations e.g CREATE INDEX, ALTER INDEX REBUILD , DROP INDEX
In Bulk Logged Recovery Mode when you execute these operations SQL Server only logs the fact that these operation occured and information about space allocation. The actual change in the data is maintained in the BCM (Bulk
Changed Map)
Since the actual changes are not recorded in the log file, the log file size in the reletively less in size but this tradeoff comes with the price of increased backup time. This is so because during the log backup its not just the log being backup, but also
the extents that are marked by the Bulk Changed Map as changed.
SQLEnthusiast
http://sqlsimplified.com/
Please click the Mark as Answer button if a post solves your problem!

What is the differences between the older version of Oracle Financials and the 11 i

What is the differences between the older version of Oracle Financials and 11i?

Vijay,Thanks for your answer,but I am still not clear about it,I have a instance to describe my question at detail.
    If there is a final product A, and the planning strategy for A is 20(MTO), the procurement type of A is F(external procurement) at the view mrp2 in the material master datas.
step1: I creat a sales order.
step2: run MRP for A.
step3: transfer the purchase requistion into a purchase order,and the field of acc.***.cat. in the purchase order will be filled out M automatically, because the acc.***.cat. in the planning strategy 20(MTO) is set with E.
    Well, the purchase order is created, what is the relationship between the sales order and the purchase order? What will be happened about costing between the SO and the PO?
    If I delete the E, I make the PO become a standard PO, what is difference between standard PO and the PO including E?
Best Regards
Bob

What's the difference between the ATA hard drive and SSD in MBP?

I'm looking to buy a new MacBook Pro and am unsure of the real differences between the ATA hard drives available and the SSDs. How would each affect my new computer? I realize many people suggest not buying these extra things through Apple for economical reasons, but lets just say I did, which would be the better option?

You don't have to give up anything for memory, that is handled by the ram...the amount of storage available in SSD is less than with a Hard Drive in large part because of the cost. You gain speed but have to be content for now with less storage space.
Of course, you could buy an external hard drive to use for bulk storage and backups, always strongly recommended. Some good drives are available from the Mac specialists at OWC, http://www.macsales.com
Those will not be as fast as the SSD but are great for letting Time Machine backup your internal storage and for use as a place to store bulk things like music or photos or videos, etc.

Is there a difference between the Ethernet WAN port and the other 3 Ethernet Ports on a Time Capsule?

As posted previously, my time capsule will not set up properly because I get an IP address conflict pop up window. Is there a difference between the "Ethernet WAN Port" and the other three ports on the back of the Time Capsule? I may have the DSL modem hooked into the "Ethernet WAN Port". Thanks.

it depends what you want to achieve and what configuration you have on your DSL modem/router.
Resetting TC and run connection wizard from the Airport utility.
Post the problems.

Is there any difference between the 2 different USB cords when syncing???

I know this may be a paranoid question to ask but I just wanted to make sure.
Is there any difference between the newer USB cords with the shorter plug (the end that goes into the iPhone) and the older ones with the bigger, square-shaped plugs that you can pinch on the sides to retract?
Is there a difference in transfer speed, syncing speed, or reliability, or build quality?
Just asking cuz the newer USB cord that came with my iPhone 3GS is getting frayed and so I'm using the older one instead.
Thanks to whoever helps.

No difference except, as you noted, you have to squeeze the older one to remove it. It's important that you do that so you don't damage it or the iPod.

What is the difference between the DataSource types in BI?

Hello,
Can someone please explain what is the difference between the four types of DataSources: DataSource for transaction data and DataSource for master data which contains DataSource for attributes, DataSource for texts and DataSource for hierarchies and explain and demonstrate at which scenario I will use each one?

When you load data into Cube/ODS, i.e. Transactional data, and you load data into it from Transaction Datasources.
For every Infobject there is Master data associated with it, and Attributes, Texts and hierarchy are types of Master Data.
Say Vendor is InfoObject, and its master data:
Vendor Vendor Desc
1 One
2 Two
Now in Transactional data Vendor 1 can be having multiple entries, and master data contacin master data of that person. Like if u go to some store, your address and personal info is going to save ones, and master data, and next time when you order something your personal details comes from master data, and whatever you buy comes under transaction data. Now with respect to you there may be many attributes, like address, contact number, and so on....and text is what which is going to describe in short who is this person. HIerarchy could be some chain, will tell how you r related to some other person, may be like if someone referred you.

Are the main differences between the 768 GB Flash storage and the 3 TB Fusion Drive?

Are the main differences between the 768 GB Flash storage and the 3 TB Fusion Drive?

About Fusion Drive
Fusion Drive combines 128GB of super fast flash storage with a traditional hard drive. It automatically and dynamically moves frequently used files to flash for quicker access. With Fusion Drive in your iMac, booting is up to 1.7 times faster, and copying files and importing photos are up to 3.5 times faster.* Over time, as the system learns how you work, Fusion Drive makes your Mac experience even better. All while letting you store your digital life on a traditional, roomy hard drive.
About Flash Storage
For maximum performance, you can configure your iMac with 768GB of flash storage instead of a traditional hard drive. Flash storage delivers up to four times the performance of a traditional drive — speed you’ll notice when you start up your iMac, launch an app, or browse your photo library.
In addition the prue flash option is $900 more the then 3TB fusion drive.

Difference Between "The speed coming into your hou...

Similar Messages

Maybe you are looking for