Difference between the t-codes: FF_5 & FF.5

Dear All,
Please clarify the - Difference between the t-codes: FF_5 & FF.5.
Thanks
Partha

Dear,
FF_5 is attached to the program RFEBKA00 which is executed but FF.5 is the system recommendation on which report should be used for specifi country function.
Regards,
Chintan Joshi

Similar Messages

What is the difference between the T.codes MC.B and MC44 ?

Hi Guys
What is the difference between the T.codes MC.B and MC44 ?
and
What is the meaning of "Key figure" ?
cheers
MaruthiRam

Dear,
MC.B - Mat.Anal.Selection; Turnover - Executing material tunrover basing the different selection parameters available.
MC44 - Analysis of Inventory Turnover - The key figure "inventory turnover" specifies how often average stock has been consumed. Inventory turnover is calculated as the ratio of cumulative usage to average stock level.
An inventory turnover analysis allows you to identify whether there are any "slow-moving items". It provides a basis for evaluating, for example, how effectively fixed capital has been used.
Key figure: The key figures that you can evaluate in the standard analyses for stock placement/removal and material placement/removal, provide information from the point of view of a storage area, and distinguish between internal and external warehouse movements. Both of these standard analyses are based on data that is updated to the information structure S090 when the events goods movement (external quantities), or stock removals/placements and transfer orders occur. The only difference between these analyses is the predefined standard drilldown path.
Regards,
Syed Hussain.

What is the difference between the passcode on my iPhone 5 and a password? I am locked out of my phone.

What is the difference between the passcode on my iPhone 5 and a password? I am locked out of my phone.

Not entirely sure what you are asking, but a passcode to unlock an iOS device is normally 4 digits long (so is a 4 digit code), though you can make it alphanumeric and longer (so effectively becomes a password).
If you don't know the passcode to unlock your phone or it's showing the disabled screen then there are instructions on this page for how to reset a device : http://support.apple.com/kb/HT1212 - you should then be able to restore/resync your content to it.

What'z the difference between the Commercial Invoices and

What'z the difference between the Commercial Invoices and
Invoices/Excise Invoices? Also I understand that we can combine 2~3
invoices and can create one commercial invoice? If it is possible, how
to create the same?
cheers
shalsa007....

Hello,
A commercial invoice is a bill for the goods from the seller to the buyer. Commercial invoices are utilized by customs officials to determine the value of the goods in order to assess customs duties and taxes.
In general there is no standard form for a commercial invoice although they tend to contain many of the following features:
     seller's contact information
     buyer's contact information
     consignee's contact information (if it is different from the buyers)
     invoice date
     a unique invoice number
     sales terms (usually in incoterm format)
     payment terms
     currency of sale
     full quantities and description of merchandise (Generally this includes unit price and total price. Product descriptions should be consistent with the buyer's purchase order. Including the Harmonized System commodity codes can be helpful, especially in countries that are WTO members.)
Excise invoice Original for Buyer copy, whether prices are inclusive or exclusive of excise duty.
The invoice in which the Excise duties are included.
As per Indian tax system, Excise duty (16%) is payable by each manufacturing unit on the value of manufactured goods / on the value added. The manufacturing plant is supposed to submit an excise duty report on fortnightly / monthly basis. Various registers (RG1, RG23A, RG23C, PLA) are maintained for that purpose, which record all the transactions including movement of goods, cenvat credit available and cash balance available.
In SAP, we use transaction j1id for configuration and j1iin, j2i7, j1i5, j2i5, j2i6, j1ip for creating, extracting and printing excise invoice.
*Please reward if this helps**
Regards
AK

Differences between the Portal Data Collector and the Activity Data Collect

Hello,
I want to know what are the differences between the Portal Data Collector and the Activity Data Collector?
Best Regards.
Pablo Mortera.

All of my SQL Server instances are sql server 2008r2 standard edition(10.50.2500). MDW is existing database, I try to setup collection sets for multiple instances and store data in one central MDW database
I create MDW in one instance, then run run configure Management Data Warehouse in target intance. collection sets were created successfully, but job failed with following error:
Executed as user: COCAD\INTDEPT01SQLAgentC10. The Management Data Warehouse version "00.00.0000.00" is not supported by the current data collector. Please upgrade the Management Data Warehouse by running the Management Data Warehouse Configuration
Wizard. Process Exit Code 5. The step failed.
Thanks
PAULqaz

Differences between SLIN and Code Inspector

Hi,
Can anyone tell me the differences between SLIN and Code Inspector(SCI)..?
and in which cases we use SLIN and SCI..?
and as an ABAPer, which one should we prefer..?
Thanks,
Pradeep.

Hi
Extended syntax check or SLIN is used to check the program in all aspects for the different syntaxes like
When you use select single whether you have passed all the key fields or not>
whether you have maintained the text elements texts or not,
Have you used UNIT...CURRENCY along with the QTY and AMOUNT fields when displayed using the WRITE statement
and check for all the varities of statements used in the code, and if there is some problem with that statement/command, it will display as error or warning.
Check following links -
slin
can any one tell me abt SLIN T-CODE
Reward points if useful
Regards
Anji

Differences between the alv's and alv grid dispaly

hi guys
.........please send the differences between the alv's and alv grid display.
thanks....

Hi Midathala,
Plz go through the links might be useful to you.
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
Check the program in the following link:
http://sap-img.com/abap/display-secondary-list-using-alv-grid.htm
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_basic.htm
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
13. Top-of-page in ALV
selection-screen and top-of-page in ALV
14. ALV Group Heading
http://www.sap-img.com/fu037.htm
How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
15. ALV output to PDF conversion
It has an example code for PDF Conversion.
http://www.erpgenie.com/abap/code/abap51.htm
converting the output of alv in pdf
Thanks
Mohinder Singh Chauhan

Difference between the 2 FM's

Hi experts can anyone please tell me the difference between the 2 function modules:
REUSE_ALV_GRID_DISPLAY and REUSE_ALV_GRID_DISPLAY_LVC . I have seen in the coding for editable ALV that they have made use of the former FM rather than the regular REUSE_ALV_GRID_DISPLAY.
( Source: <a href="http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_editable.htm">Editable ALV from sapdevelopment.co.uk</a> ) So can anyone explain as to whether its actually possible to code the editable ALV using the REUSE_ALV_GRID_DISPLAY FM or not. Thanks

hi
'REUSE_ALV_GRID_DISPLAY' is for the SLIS type pool.
'REUSE_ALV_GRID_DISPLAY_LVC' is for the LVC type pool which of course has a better functionality.
1) Common in display result
REUSE_ALV_GRID_DISPLAY_LVC and REUSE_ALV_GRID_DISPLAY have similar display view
2) Common in usage
REUSE_ALV_LIST_DISPLAY and REUSE_ALV_GRID_DISPLAY have very similar parameters for
function call (types from slis)
one rarely use fm REUSE_ALV_GRID_DISPLAY_LVC as class cl_gui_alv_grid provides more
power and functionality.
regards
Navjot
reward if helpfulll
Message was edited by:
navjot sharma

There is a difference between the document total and its components

Hi!
I have an error message "There is a difference between the document total and its components" when I want to create an InventoryGenEntry
the problem arises from time to time and my customer must do the document two or three times before it is created.
I have seen in this forum and in notes that this is probably being caused by a Rounding.
I am using 2 digits for amounts, 4 digits for prices, 6 digits for rates and 3 digits for quantities.
For information my customer use SAP 2005 and the patch level 46.
This problem happened only in InventoryGenEntry. how can I modifiy parameters to resolve this problem?
thank you for your help.
Best Regards
Séverine

Hi Séverine,
Do you find any additional code added to SBO_SP_Transaction stored procedure. A similar issue with stock transfer fixed in later patch. Please test in latest patch.
Regards,
Vijay kumar
SAP Business One Forums Team

What is the difference between the Intel HD Graphics 5000 and the Intel Iris Pro Graphics in the current iMacs

What is the difference between the Intel HD Graphics 5000 and the Intel Iris Pro Graphics in the current iMacs?

I am assuming you are talking about PPC Macs? Those haven't been manufactured or sold in years (since early 2006 I believe) when Apple started using Intel processors. There are still some apps which run on PPC code only which makes them incompatible with the last three Mac operating systems.
There are different Applecare products depending on which Mac product you buy, although the coverage is about the same (except for iOS devices).

WRT54G*, difference between the three?

I'm in need of a new G-router, and i checked out linksys WRT54GL, which led me to WRT54GS and then i discovered there's also a WRT54G...
What's the main difference between the three, i'm having a hard time to understand which one to choose...
Because prices are pretty equal, i would like to choose the "best" one, so to say.

vness wrote:
Do not get a wrt54g v8 router. It only has 1 year warranty. Everything else has 3 years except for wrt150n which has only 1 year warranty as well.
Looks like that changed recently. Just got a new WRT54GL and it says "One-Year Limited Warranty" on the box right under the UPC code.

Hey, I'm doing some cross browser testing and i want to know Is there any difference between the behavior of Firefox in an operating system 64bit & operating system with 32bit. (like windows7/windows vista...) Thanks,

Hey, I'm doing some cross browser testing and i want to know Is there any difference between the behavior of Firefox in an operating system 64bit & operating system with 32bit. (like windows7/windows vista...) Thanks,

Hi O_H_I_O,
Have you got an error code ?
Considering it is a brand new machine ,please update the machines .To get a better performance of the machines ,we should always keep it up to date .
There is a possibility that the DVD/CD-ROm drives driver is old or has corrupted .Please open the device manager , update or reinstall the driver to have a check.
Apart from this ,we can run the built-in tool to a diagnostic :
Control Panel\All Control Panel Items\Troubleshooting\All Categories\Hardware and Devices
We also can run the following fixit tool to have a check.
Fix problems with CD or DVD drives that can’t read or write media
http://support.microsoft.com/mats/cd_dvd_drive_problems
Best regards

Show difference between the years and how much money increased ever year

Hi everyone
I need to make the following code show how many years it took for it to reach its required goal.
show difference between the years and how much money increased ever year. ..
I am totally confused at the moment... any help would be greatly appreciated...
declare
a number(9):=1000;
b number(9);
c number(9);
d number(9);
begin
for d in 2012..2099
loop
dbms_output.put_line(a||' '||d);
if a >2000 then
exit;
end if;
a :=a + a*10/100;
end loop;
end;
Result for above query:
Price Years
1000 2012
1100 2013
1200 2014 etc...
I need to show the amount of years it took to reach its goal, which was $2000
and also the change in price, how much it increased every year...
Thanks
Umair

960361 wrote:
Hi everyone
I need to make the following code show how many years it took for it to reach its required goal.
show difference between the years and how much money increased ever year. ..
I am totally confused at the moment... any help would be greatly appreciated...
declare
a number(9):=1000;
b number(9);
c number(9);
d number(9);
begin
for d in 2012..2099
loop
dbms_output.put_line(a||' '||d);
if a >2000 then
exit;
end if;
a :=a + a*10/100;
end loop;
end;
Result for above query:
Price Years
1000 2012
1100 2013
1200 2014 etc...
I need to show the amount of years it took to reach its goal, which was $2000
and also the change in price, how much it increased every year...
Thanks
UmairHow do I ask a question on the forums?
SQL and PL/SQL FAQ

Can anyone tell me the major differences between the versions

hi all,
what is the difference between the versions 4.6c 4.7EE and 5.0.
Atleast anyone suggest where i can get the difference exactly.
Thanks,
Saroja.

<b>Difference between SAP 4.6b, 4.6c, 4.7e and ECC 5.0 Versions</b>
If you are an existing user of SAP, you will probably be aware that as from January 2007 all releases below 4.6c will no longer officially be supported by SAP. Maintenance costs for releases 3.1 - 4.6b inclusive will also attract a total charge of 21% during 2005/6.
So what are your upgrade options?
You could upgrade to release 4.6c - or the more comprehensive mySAP.com - which are both currently scheduled to be supported by SAP until December 2009. These products have been available since 1999 and already have a broad user base. Bear in mind however that maintenance costs for this release will be 19% during 2007 and 21% during 2008/9.
If you wish to avoid the expense and disruption of a potential further upgrade in 2006/7, you may want to consider upgrading to release 4.7 (SAP R/3 Enterprise). Whilst this product incorporates relatively new technology, it has the advantage of being supported by SAP until March 2012 and provides new functionality in many areas.
SAP is encouraging existing users to go beyond the 4.7 (SAP R/3 Enterprise) environment and upgrade to mySAP ERP as a stepping stone to mySAP Business Suite. However, you should note that an upgrade to mySAP ERP requires a change in licensing plan. mySAP ERP licences are role-based, so you need to assess the number of finance, logistics, HR users etc. and pay accordingly. This is a radical change from previous licensing schemes operated by SAP, whereby each seat purchased was accorded full usage of the entire SAP environment (in line with user authorisations).
No technology upgrade is necessary to move from 4.7 (SAP R/3 Enterprise) to mySAP ERP. You simply add the benefits of mySAP ERP to your installation as you go along. The upgrade from mySAP ERP to mySAP Business Suite is equally straightforward you just add those mySAP products available in the latter that you require. The alternative strategy would be to remain on 4.7 (SAP R/3 Enterprise) or mySAP ERP and purchase mySAP products available with mySAP Business Suite as add-ons.
Please see below the current maintenance schedule for SAP products:
SAP R/3 3.1 - 4.6b
Maintenance extension until December 2006
2005/2006: additional fee of 4% (17% plus 4%)
SAP R/3 4.6c
Maintenance extension until December 2009
2007: additional fee of 2% (17% plus 2%)
2008/2009: additional fee of 4% (17% plus 4%)
SAP R/3 Enterprise:
Maintenance extension possible until March 2012, available to all customers
April 1, 2009 - March 31,2010: additional fee of 2% (17% plus 2%)
April 1, 2010 - March 31, 2012: additional fee of 4% (17% plus 4%)
MySAP ERP 2003
Mainstream maintenance until end of March 2009
April 1, 2009 - March 31,2010: additional fee of 2% (17% plus 2%)
April 1, 2010 - March 31, 2012: additional fee of 4% (17% plus 4%)
MySAP ERP 2004
Mainstream maintenance until end of March 2010
April 1, 2010 - March 31, 2011: additional fee of 2% (17 plus 2%)
April 1, 2012 - March 31, 2014: additional fee of 4% (17 plus 4%)
All of the above maintenance durations and extensions include all industry add-ons and all legal charges for HR and FI/LO.
If you are contained in say Financials and HR - then your burden to go to mySAP ERP is smaller - as you go from one system to another system.... on the opposite - if you use R/3 and use customer processes, manufacturing and purchasing processes - and you do not use yet mySAP CRM, mySAP SCM, mySAP SRM... then you not only have to pay more for the license - not only for mySAP ERP - but also for mySAP CRM, mySAP SRM, mySAP SCM... - the mySAP Business Suite may be interesting pricing option then...
But then to pricing - SAP says they will reduce the credit on your R/3 payments with the change of the calendar year... for some a big motivation to move to mySAP ERP license... but as a Gartner report from today pointed out - not many of these customers really upgrade to mySAP ERP in terms of functionality - but use it more as a license centralization for some instance consolidation - as well as only a technical upgrade. And then there are the many SAP customers who buy mySAP ERP - but stay on R/3 - but get this as they buy the mySAP BW license for all their users with it... and it's cheaper to buy mySAP ERP (as you need it sooner or later anyway) - than buying mySAP BW standalone now - and mySAP ERP in a few years...
One final argument... remember when mySAP ERP shipped first - March 2003. SAP said they would have the vertical code of R/3 by end of 2003... well they had not - all of it will be out only now in Q2 2006 with mySAP ERP 2005 --- three years later! How did SAP's world class engineering team miss dates so badly? It's tough to move working R/3 code over to the mySAP xxx world with NetWeaver! And no the secret: Is there a difference between you modifying a R/3 system -- and SAP development creating a vertical piece of code? Not really - or better - not at all... so have a very good luck at your modification...
Finally - there are some tools in the market which have a very good handle on estimating the implementation cost... take a look at them.
Bottom line: If you are using a lot of R/3 - you have major license cost and a major risk to upgrade... you should even look at alternatives to SAP then - as you spend as much in upgrading than switching... take advantage of some of the attractive commercial offerings from SAP competitors - even if you do this only to negotiate a better price from SAP.
If you are using a little R/3 only - and that is contained in mySAP ERP... then it comes back to how much license you want to pay now (or later - so it's really a financial consideration) - and your overall risk readiness. If you are happy to pay now and risk averse - you go for mySAP ERP 2004 or 2005... if you are risk sensitive and don't want to pay now and wait for others to be the "guinea pigs" for mySAP ERP 2007 / 2005 etc - then you go to R/3 Enterprise. Easier upgrade, no license cost. Sit on the fence and see what SAP and competitors do to service enable their apps.
Hope this helps a bit...

Difference between the SAP versions

Dear all,
Please let me know the difference between 4.6b, 4.7 and ECC5.0 with special reference to the SD module.
Thanks in advance.

There are so many differences between the version in different objects
I will explain in two or more objects the difference
1 in the customer master in 4.6 version there is no partner function tab in the customer in xd01 t-code
and also there is no CIN tab in that version
but it is there in the 4.7 EE version
This is the major change from the 4.6cc to 4.7EE
2. in 4.7EE there is some settings that are related for CIN
which cannot be done in 4.7EE that means they need some patches for doing the configuration setting for the CIN
But we can do the same in the 6.0 version
These are the some of the settings that are differed in the two versions and in that two objects
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prospective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences please refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
For Functionality Differences please refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Re: Difference Between SAP Version ECC 4.6, 4.7, SAP 5.0, 6.0 with SA
Re: SAP version differences 4.5b, 4.6c and ECC6.0
You can find the difference in release notes of each SAP version.
Here are the links.
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prospective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences please refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
rewards if it helps
siva

Difference between the t-codes: FF_5 & FF.5

Similar Messages

Maybe you are looking for