Difference between Transferred Records and Added records

Hi,
I am loading data into infocube ZPT_C01, a copy of 0PT_C01. In the "Manage function", under "Requests", I see two columns. One that says Transferred Records: 271370 and the other Added records: 30320.
I understand that 271370 is the number of records in the PSA. Is 30320 the number of records added to the Infocube?
Why aren't those two numbers identical? Are records lost? Can someone explain to me why the two record numers aren't the same?
Thanks in advance
Michalis

Hi,
the collapsing of a request is usually done when its data has been judged "correct" since a collapsed request cannot be deleted from an InfoCube.
Now in your case, it seems that you are always having one request in your ICube and you systematically delete the datatarget content prior loading it; you could collapse your request or not. If you collapse it you might get less records in your E fact table with the corresponding increase of query runtime; however if the ratio #records collapsed (in E table) / #records collapsed (in F table) is close to 100%, you most probably don't need to collapse this request.
In your scenario you have to be careful with the dimension tables; indeed when you delete the cube content via a chain, the dimension tables won't be deleted (that's good since when the next request will come the system won't have to recreate all the DIMIDs already present) and after a while many of these DIMIDs will perhaps not be used (you can run the corresponding RSRV check to verify this)...
hope this helps...
Olivier.

Similar Messages

  • What's the difference between Transferred Records and Added Records?

    When right click an ODS or a cube to select Manage, then under the 3rd tab called Requests, there are two columns called Transferred Records and Added Records, what's the difference between these two?
    Thanks

    Hello KeLviN,
    How r u ?
    Consider a realtime example.
    Assume a transfer of Transactional Data from R/3(with PSA) which is having Unit values in it.
    Now, I found in RSA3 2844168 of records. In BW I saw one Data Packet with 306 error records(because of a UNIT value is not available in BW T006 table, Eg. YDD) which are automatically collected in PSA. Now in the Monitor screen you could see 2 Monitor status with GREEN Signals for 2 set of data.
    1. with 2843862 records
    2. with 306 records
    Now, if u manage the Data Target you will get 2844168 in the Transferred Records & 2843862 in the Added Records. and the 306 error records are in the PSA.
    Hope this is clear.
    Best Regards....
    Sankar Kumar
    +91 98403 47141

  • Whats the diff between Transfered Records and Added Records

    Hi
    whats the diff between Transfered Records and Added Records in any data target Request Tab.
    Regards
    ll

    Hi.......
    Check this.......
    What's the difference between Transferred Records and Added Records?
    Manage ODS : Difference of Transferred Records and Added Records
    Regards,
    Debjani......

  • Manage ODS : Difference of Transferred Records and Added Records

    Hi there,
      When I click on Manage ODS , I have the following fields
      Transferred Records and Added Records.
      Please advice the difference

    Hi,
    Transferred Record coloumn indicated how many records were tranferred from the source system to BW,means how many records were extracted at that point of time and another Column indicates that the total number of records added to your data target.these two cloumn vales may not be same for all the time,becoz if you have filters at the update rule level....in this case numbers records tranfered and numbers records added might be different.......
    Transferred refers to the number of records that are transferred from the datasource (arrive in BW). Added is the number records inserted into the ODS. Both can be different numbers, like due to any processing of the data.
    Added records refer to which is really inserted in ODS (your start routine, for example, can reduce the number of transferred records by deleting something!)
    Ex
    transferred records means the total records from source e.g ods. say data coming from ods
    docnumber docitem customer qty
    001 1 x 10
    001 2 y 20
    002 1 x 30 (3 records)
    and your infocube has char customer and keyfigure qty, so
    record added
    customer qty
    x 40
    y 20 (2 records)
    so here you have transferred records = 3 and added records = 2
    Refer these posts:
    Re: transferred records and added records
    Re: Transfered and Added Records
    Re: Clarification about ODS - Transferred & Added records
    -Shreya

  • Transferred records and added records

    in Cube manager, I see the number of transferred records and added records in each request are always different.
    what's the exactly means of those two field ?  I guess added records is record loaded into cube without any duplicated, right?

    Hi Jie,
    Refer these links:
    Re: difference i transfered records and added records
    Re: manage infocube
    Bye
    Dinesh

  • Difference between source list and info records

    Dear All,
    What is the difference between Source List and Info Records?
    Thanks N Regards
    Anandasiva

    Hi,
    The source list is the list which shows the sources from which you can procure the material. If you have ticked the source list requirement in the material master, then you can procure the material only from the vendors mentioned in the source list.
    In Inf Record, you maintain the data for a material supplied by a vendor. e.g. Material price, tax code, other conditions,, buyer code, delivery & payment terms.
    Hope your requirement is fulfilled.
    Reward points if the answer is helpful.
    Regards,
    Prashant Kolhatkar

  • Difference between importing files and adding files/folders to liabrary?

    When I want to bring in new music into my liabrary from my my music folder, I don't know the difference between importing them and adding a file. They both seem to bring up the my music folder and seem to give me the same options?

    To quote from the following link:
    "When you add something to the library, essentially you are taking existing audio or movie files and adding an entry for each to your iTunes Library index. iTunes adds entries in your iTunes library for the selected files, and copies the files to your iTunes Music folder (if you have that option selected in the Advanced pane of iTunes preferences)."
    "The Import menu item allows you to import playlists and other data files into iTunes."
    For more see this page: About the Add to Library, Import and Convert functions

  • Difference i transfered records and added records

    Hi friends,
    I have loaded data into ODS and it was succesful,but when i check in the Requests tab in mangae i found that number of records transferd is 4000 but number of records added is just 1401. can anyone please advise me where ami going wrong.
    Regards
    Ananth

    Hi,
    The reason they could be different for an ODS is because in an ODS the record is identified based on the key fields.
    For example
    If I have GL posting document wherein the Posting document no. is the key field in the ODS. I may have modified the same GL posting document in R/3 for 6 times but wben it is uploaded into an ODS it will just contain one record for the final staus of the GL posting document.
    So in this case even if 6 records are transferred, only one record will be added to the ODS.
    As a result it is not always necessary that there might always be something wrong when the transferred and added records are different.
    But for ODS it is important that the key field is correctly identified, if that is not the case you might have records being overwritten (transferred records more than added records) which might be wrong.
    So I would suggest you to check the Key fields, and if your totals match with R/3 or the source data.
    Hope it helps
    Cheers
    Anurag

  • Why can I have a difference between Transferred Records and Added Records

    Hello gurus,
    What could be the reason for the difference between the Transferred records and the added records in the request for an InfoObjects?
    I have in RSA3 6452 Records and in the Manage-InfoObject 1002 Records.
    thanks for your help

    - already existing master data (changed but not new)
    - start routine with deletion
    - duplicate records (with error handling activated)
    - end routine

  • Difference in Transfered Records and Added Records

    Hello All,
    I did the delta load of my Sales Orders and Items for the first time. The load is successful but when I see in the Manage Screen of the ODS, I noticed that the number of the Transfered records and the Added Records are different i.e for ex: the Transfered records are 4 and the added records are 2.
    Why is this happening? Is this because I miss something?
    Rgds,
    Sharath.

    Hi Sharath,
    As manga said it might due to transformations - update / tranfer rules.
    Another reason would be the key of ODS for eg: if the extractor is pulling based on say three key fields from the base table say  A B C and if you defined only A B as the key in ODS  then these gets overritten
    Hope this helps
    Thanks,
    Raj

  • Accounting the differences between the group and statutory record

    Hi guys,
    In our set up, the group reporting requires the book to be closed within 10 days from the year end. However, due to various tax reasons, the stutory books can be kept open till 25th.
    For example, there could be a credit note to be accounted between 10th and 25th which should appear in the statutory books as part of current year. But in  Group reporting it should consider as the transaction for next year.
    We have considered 2 options:
    a) Do an adjustment transaction using Gl accounts with differnet range and exclude these accounts from group reporting. next year, reverse these transaction and account using normal GL accounts.
    b) Account the adjustment transactions in a special period. In Group reporting, exclude these spacial transactions. However, the group reporting should include the special period from the previous year.
    c) Use special purpose ledger. Account the transactions in special period and consider changing the period in the mapping rule (yet to prove).
    Can anbody think about any other options?
    many thanks
    AMA

    Commitment limit is not related to order value.
    As per help file:
    A warning message appears if <the customer's account balance>+ <the total amount in undeposited checks> + <the amount of the current document> exceeds the customer's commitment limit.

  • Transfered and Added Records

    Hi friends,
    I know that the added records can be less than the transfered records. A substantiated discussion was found in one of the earlier threads. But, I have a situation where added records are more than the transfered records. RSA3 shows me 1000 records but, added records in the cube shows 1032 records.
    1. Under what circumstances can this happen?
    2. How to check where the problem is in this case?
    Thanks in advance
    Subray Hegde

    Hi,
    Probably the records are split in your case in the update rules and hence more no. of added records.
    Check this:
    Re: transferred records and added records
    Re: difference i transfered records and added records
    Re: manage infocube
    Bye
    Dinesh

  • Transferred records vs Added records

    Hi all,
    i've understood the differences between two fields shown in "Manage Data Target", then TAB "Request.These are the fields:
    - "transferred records";
    - "added records".
    Could you please help me on this?
    Thanks in advance,
    Federico

    Hi Federico,
    Please try to search the forums:
    Transferred and Added records
    transferred records and added records
    Hope this helps...

  • What is difference between additive delta and new status for change record

    Hi Experts
    Can any one explain me about the difference between additive delta and new status for change record with example
    if any one has a document please post it iam thank full to u
    thanks
    Ahmed
    Please search the forum before posting a thread
    Edited by: Pravender on Feb 12, 2012 1:54 PM

    Hi
    Additive delta --- We will get the changed quantity.
    say suppose you have sales order and quantity like  1111   30 which is loaded to cube(BW).
    now same record qty has changed from 30 to 40. As we have additive delta, we will get new record as 1111  10.
    new status for change record: This is same as like After image delta type in standard SAP data sources. for every change in record you should have new record.
    say if you have any number which will be generated by system for new/changed record, then you can use this.
    You can use this option when delta option set to "numeric pointer"
    Regards,
    Venkatesh

  • Transfered and Added records at DSO level

    Hello Experts,
    I am always confused about Transfered and Added records at DSO level. While I was testing DSO data I observed that, Transferred records are after Transformation before End routine. Added records are after End routine added to the New data table. Can u please put some light on this.
    Many thanks,
    Zakir Khan.

    Hi
    The Transferred Records column displays the number of records transferred to the BI system. The    records are usually written to the PSA first of all.
    The Added Records column displays the number of records that were written into the InfoProvider. This number can differ from the number of transferred records if records were filtered out or added during the transformation
    Please Refer Below Link
    Re: added records and transferred records
    Thanks

Maybe you are looking for

  • Help with saving options

    Hi, I am new to mac and loving every moment of it. However, l am trying to save a photo in iphoto to a disk and l am so lost. Can anyone help me. Please forgive me if l am in the wrong forum. Thanks in advance.

  • How to add URL links in XML file?

    Hi, I'm having problem with adding the URL links to the flash output. I'm using the XML file to call images and then the corrsponding links. Images are called correctly but when I try to add a link I'm not getting the links, but instead getting the H

  • Adapter Module to rename a file at FTP

    Hi All I have to write a Adapter module to change the filename of a file which is at the ftp location. How can i do this. Regards Dheeraj Kumar

  • T410 System Halted Without Reason

    It is so frustrated that will have to reboot the laptop at least once almost daily due to the system halted without reason. Is there a way / tool for me to find out on what is causing all this to happen?

  • Convert from String to Int

    Hi, I have a question. How do I convert from String to Integer? Here is my code: try{ String s="000111010101001101101010"; int q=Integer.parseInt(s); answerStr = String.valueOf(q); catch (NumberFormatException e) answerStr="Error"; but, everytime whe