Difference between "type"'s of laptop model's - X201

I've got two X201 laptops, that seem identical, except for the processor (one is an i5 2.4. and the other is an i5 2.53). Also, the computer "type" is different on them. One is a 3249 and the other is a 3680. The only reason I care is that I was moving a hard drive from one of the laptops to the other laptop and figured the hardware is identical (besides the processor type) and that it wouldn't have any issues. When Windows tries to boot with the first hard drive in the second system, I constantly get the blue screen. Windows can't seem to repair the windows install, and if I put the hard drive back in the original system, it boots just fine. I can't believe that just a higher speed processor would cause this to blue screen. I've swapped hard drives between "like" dell systems in the past with no problems (even when there were different processors, but the same model laptop). Why do they have so many "type's" of this system and does anyone know where I can find the differences. You would think the types and differences would be posted somewhere but I can't find it.

Hi,
What Windows version are you running? What is the BSOD message?
Any chance one OS was installed in AHCI mode and the other in compatibility mode?
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Difference between type lvc_t_fcat and slis_t_fieldcat_alv

Can you tell me the difference between type lvc_t_fcat and slis_t_fieldcat_alv?
Both are used for field catalogue so which one is better to use?

Hi,
the field catalog using lvc_t_fcat has some better and enhanced features over the old slis_t_fieldcat_alv.
Ideally when displayed a normal ALV using these fieldcatalogs does not have any difference...
You can more enhanced features of ALV using lvc_t_fcat but these cannot be done using slis_t_fieldcat_alv
For using lvc_t_fcat, you require a screen and a container area...
Based on the requirement, use the fieldcatalogs.
Also slis_t_fieldcat_alv does not have any classes or methods but the other has so..(objecct oriented)
Regards
Sk

Difference between types of plan data

Hi Friends,
BPS
1. Cost Center Planning: Costs and Allocations
2. Cost Center Planning: Activity Type Prices
3. Cost Center Planning: Cost Center/Activity Type Prices
4. Cost Center Planning: Cost Driver
For the above types of data, I like to understand what is the difference them.
For type 1, I understand it is for primary costs.
For type 2 and 3 they are related / same type of data. So what is the difference between them?
For type 3, seems like combo of types 1 and 2.
For type 4, I am not sure what it is about.
Questions I have:
1. Why is it only primary costs. Where is secondary costs?
2. Type 1 costs is identified by cost elements of costs centers. But type 2 is by activity, quantity and rates ( i think). And costs calculated. So, is this type of cost outside the cost calculation of type 1 such that to get wholistic cost picture, need to add types 1 and 2 at least? Thus, are they mutually exclusive.
3. Now, how does the same apply to type 4?
4. What is the purpose of type 3?
Hope you could advise me friends
Regards
Michael

Hello Michael,
Different types of CO planning relate to how an organization is using SAP Controlling functionalities. Activity represent typically internal labor/machine provided by one department (cost center) to a production order, project network etc. depending on the type of organization (production activities or project-driven operation etc.). Activity price would set per cost center for time of periods (months), representing standard price for valuation of actitivities.
More CO documentation attached:
http://help.sap.com/saphelp_erp2005/helpdata/en/dd/4298375ae2f84ae10000009b38f8cf/content.htm
Regards
Auvo Ahola

Difference between operational systems datamodelling & datawarehouse model

» An understanding of the differences between operational systems data modeling and data warehouse data modeling.

Hi,
While in a OLTP you have data tables free of redundance and ready for transactions meaning writing and reading few records often, in an OLAP-system you need to read a lot of data for every query you do on a database. Often in an OLAP-system you aggregate these amounts of data.
Therefore you use another principle for these database scheme. This is called star schema. This means that you have one central table (called fact table) which holds the key figures and have keys to another tables with characteristics. These other tables are called dimension tables. They hold combinations of the characteristics
I hope the following links may help you to get some more Idea.
Re: OLAP AND OLTP
Re: R/3 and BW reports
Re: BW benefits
Regards,
Haritha..

What is the difference between the HP Pavilion dv7t models NQ339AV and NZ584AV ?

My dv7t 3000 CTO just arrived this morning. The order summary said I was getting a model NZ584AV. The delivery invoice and product says what was delivered is a NQ339AV.
How do I find out the difference between these models?
By the way, it shipped two days early, and even though it didn't leave Shanghai until Tuesday, it still arrived in New Jersey Friday morning. Amazing!!!
David
David

Configure-to-order (CTO)
It's the same computer, just different nomenclature.
Carey Frisch
Microsoft MVP
Windows Expert - Consumer

Difference between "Type Any" and "Type Data"

<<Moderator message: don't post the same question in more than one forum - duplicates deleted>>
Hello Everybody,
Could anyone please tell me the difference between below two declarations:
Field-symbols: <lv_first> type any,
<lv_second> type data.
Edited by: Matt on Nov 6, 2008 1:34 PM

I will tell you where you can find the details;
1) Goto Tcode ABAPHELP ,enter "TYPE DATA" in the keyword and press ok,
2) In the Appearing list double click on the data, built-in generic type under sub-node ABAP Environment.
If you cannot end up finding this, please close the thread and go home :).
Regards
Karthik D

Difference between MVC and 3-Tier model?

What is the difference between a Model View Controller design and a 3-tier design? I have read that the 3 tiers are independant, but that is also the case in the MVC design so are the two kind of designs not rather similar??

When I think of the 3-Tier system, doesn't necessarily mean hardware, but a separation of laters of logic, which may or may not be physically independent.
The 3 tiers are presentation, domain logic, and data source. When mapping these three layers to Model View Controller, the layers are not 1:1.
Presentation maps pretty close to the View, but Model encompases both the Data Source and the most of the Domain Logic. It includes how you get the data and what you do with it. The Controller is that part of the domain logic that determines a request-response control (progression from one view to the next, calling the model logic necessary along the way).

Is there any difference between iPod Touch 5th Gen models?

I want to buy an iPod Touch 5th Gen, and i looked for it on the internet, and i noticed that every site has a specific model (eg. APTO5G32BL or MD717ZP/A), (some sites have the same model). And i want to know if there is a difference between iPod models so that i buy the better one.
Thanks

first of all, i don't live in the middle east, i live in Australia.
after googling, you seem to be right, that the photo on the right is not a valid Apple model number.
but is it bad thing to not be a valid Apple model number, since it's cheapest i've ever seen.
and btw, if you can't read the model numbers:
the left: MD717ZP/A
the right:APTO5G32BL
THANK YOUUUU

Whats the difference between these two iphone 5 model "md635ll vs md639ll"?

i know theres alot of versions of iphone out there. I currently live in california, whats the difference between md635ll vs md639ll models?
I currently have the md639ll one.

My feeling here is that simply changing join syntax and case vs decode issues is not going to give any significant improvement in performance, and as Tubby points out, there is not a lot to go on. I think you are going to have to investigate things along the line of parallel query and index vs full table scans as well any number of performance tuning methods before you will see any significant gains. I would start with the Performance Manual as a start and then follow that up with the hard yards of query plans and stats.
Alternatively, you could just set the gofast parameter to TRUE and everything will be all right.
Andre

Difference between Types of reports

HI GURUS.,
               In SAP we have differenr reports ,can u please say the difference between standard analasys,flexible reports,early warning reports
Thanks in advance
Narayana
Message was edited by:
        manam narayana
Message was edited by:
        manam narayana
Message was edited by:
        manam narayana

Hi
Standard analyse
You can analyse various customer related information in this
Flexible reporting
Assume you want to analyse sales flow of the customer in all the years and compare it with the current year. Some complex scenario...
Early warning report
Assume that you want a report which indicates the list of customer whose sales transactions has been reduced by 10% in the current year compared to the last year
This kind of reports gives you early indication of possible future trends which could be traced to a reason and possible action could be followed up on the customers
Regards
N Ganesh

Practical Differences between types of routines....

Hi ,
Which are the practical differences between :
1) a function so as to return a value/data set....
2) a procedure which defines an OUT parameter so as to return a value/data set....Thanks ,
Simon

Performance is another aspect that at times can play a role.
A function passes a value from one stack to another stack - reference by value. This means the result of the function is copied from the function's stack to the caller's stack when the function terminates and its stack is popped.
A procedure can use reference by name (pointers). In this case the output of the procedure's parameter is written directly into the variable of the caller. No copying.
When the parameter is large (think CLOBs for example), a function returning a CLOB can be significantly slower that a procedure with a IN OUT NOCOPY CLOB parameter.

Difference between type of IViews

Hello All,
    Could anyone please tell me what are the major differences between ITS Iviews and Transaction Iviews?
    I am working on ESS using ITS 6.2What is the advantage of using ITS Iviews when the transaction Iviews are also available?
Thanks,
Deepti.

Hi Deepthi,
   Transaction iviews are Master iviews. These are not displayed in a page of MySAP.com Enterprise Portal. These are Java coded elements that enable the following applications and objects to run in the MySAP.com Enterprise Portal as Java iViews or External Services.
R/3 transactions
R/3 reports
   ITS iviews are External Services iviews. These are pieces of content that are displayed in a page of the
MySAP.com Enterprise Portal.
External Services are similar to Java iViews. They also inherit properties from the Master iView upon which they are based. External Services are normally displayed in the Portal as full-page iViews, unlike most Java iViews.
Unlike .NET iViews and Java iViews, External Services cannot be assigned or directly linked to a Portal page. They are assigned to Portal users through role,
directory, or workset assignments. In addition, External Services do not run on the iViewServer or Java iView Runtime servlet engine.
   Java iViews are pieces of content that are displayed in a page of the MySAP.com Enterprise Portal.
Java iViews are typically written in JSP or Java and run on the Java iView Runtime servlet engine. A Java iView inherits its properties from the Master iView upon which it is based.
Regards,
Pooja.

Battery - difference in last letters of laptop model (is it important?)

Hello Forum!
I want to buy a new battery for my HP Pavilion dv5 1032eg. I already found a battery which I can buy but there is a difference in the last two letters (in my case I need "eg"). What do they stand for? Do I have to consider them when buying a new battery?
Below you can see the two types of the Pavilion 1000 series which are listed on the site. They are the same model as mine but only have different letters at the end; el and tx.
Thank you very much!
HP Pavilion DV5-1000 Product Series
dv5-1000 / dv5-1000e / dv5-1000eg / dv5-1000ea / dv5-1000us / dv5-1001au / dv5-1001ax / dv5-1001tu / dv5-1001tx / dv5-1002au / dv5-1002ax / dv5-1002nr / dv5-1002tx / dv5-1002us / dv5-1003ax / dv5-1003cl / dv5-1003nr / dv5-1003tx / dv5-1004ax / dv5-1004nr / dv5-1004tx / dv5-1005ax / dv5-1005ef / dv5-1005eg / dv5-1005em / dv5-1005tx / dv5-1006ax / dv5-1006tx / dv5-1007ax / dv5-1007ca / dv5-1007cl / dv5-1007ef / dv5-1007tx / dv5-1008ax / dv5-1008ca / dv5-1008ea / dv5-1008tx / dv5-1009ax / dv5-1009ea / dv5-1009tx / dv5-1010ea / dv5-1010ef / dv5-1010eg / dv5-1010et / dv5-1010tx / dv5-1010us / dv5-1011ea / dv5-1011tx / dv5-1012ea / dv5-1012tx / dv5-1013tx / dv5-1014tx / dv5-1015ea / dv5-1015nr / dv5-1015tx / dv5-1016tx / dv5-1017nr / dv5-1017tx / dv5-1018tx / dv5-1019tx / dv5-1020ef / dv5-1020el / dv5-1020et / dv5-1020tx / dv5-1021tx / dv5-1022el / dv5-1022tx / dv5-1023tx / dv5-1024el / dv5-1024tx / dv5-1025tx / dv5-1026tx / dv5-1027tx / dv5-1028ca / dv5-1028tx / dv5-1029tx / dv5-1030ef / dv5-1030el / dv5-1030ep / dv5-1030es / dv5-1030tx / dv5-1031tx / dv5-1032el / dv5-1032tx / dv5-1033tx / dv5-1034ca / dv5-1034el / dv5-1034tx / dv5-1035tx / dv5-1036tx / dv5-1037tx / dv5-1038tx / dv5-1039tx / dv5-1040ec / dv5-1040ee / dv5-1040eg / dv5-1040eh / dv5-1040ep / dv5-1040er / dv5-1040et / dv5-1040ew / dv5-1040ez / dv5-1040tx / dv5-1041tx / dv5-1042tx / dv5-1043tx / dv5-1044ca / dv5-1044tx / dv5-1045tx / dv5-1046tx / dv5-1048er / dv5-1050ei / dv5-1050ek / dv5-1050er / dv5-1050es / dv5-1060ec / dv5-1060ee / dv5-1060ew / dv5-1070ec / dv5-1070ee / dv5-1070er / dv5-1070es / dv5-1070ew / dv5-1080eh / dv5-1080ei / dv5-1080el / dv5-1087eo / dv5-1090es / dv5-1093xx / dv5-1094eo / dv5-1094xx / dv5-1095eo / dv5-1096xx / dv5-1098xx / dv5-1099xx

No it should not make any difference.. however if you provide me the product number (p/n) of your NB pasted on the bottom....then i can suggest you the exact battery to purchase....
||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//
||-If my answer solved the problem please mark the topic as the accepted solution-||

Difference between type of Secondary Cost Element Category?

Hi,
I checked the system, and during the secondary cost element (CE) creation, I can select some of the CE category as follows:
21 Internal settlement
31 Order/project results analysis
41 Overheads
42 Assessment
43 Internal activity allocation
50 Project-related incoming orders: Sales
51 Project-related incoming orders: Other
52 Project-related incoming orders: Costs
61 Earned value
My question, what kind of report that I can read entries with these kind of CE?
Reason: I want to check what has been posted to these secondary CE.
Or
Could anyone explain the use of above-mentioned CE category in brief?
Thanks.

Cost element that is used to allocate costs for internal activities.
Most often used categories are
21 Internal settlement
(When ever an order is settled e.g internal order settling to cost center through this type of cost elements)
31 Order/project results analysis
(WIP in production orders are calculated and posted using this category)
41 Overheads
(Used in costing sheet to do an overhead allocation)
42 Assessment
(whenever cost is allocated between cost centers through allocation method - Assessment)
43 Internal activity allocation
(found in production orders when a routing activity is confimed the charge goes to the production order through this cost element)

What is the difference between TYPE and LIKE exaclty.

Hi,
Type refers to data type like C or I or N etc...
example :
matnr type mara-matnr.
Like refers to data object.
can also use in programs like:
matnr like mara-matnr.
I am not getting the exact difference in both.

[Try here: lmgtfy|http://en.lmgtfy.com/?q=WhatisthedifferencebetweenTYPEandLIKEin+ABAP]

Difference between "type"'s of laptop model's - X201

Similar Messages

Maybe you are looking for