Difference between UCOS restricted version and unrestricted version

Hi to all,
somebody knows which is the difference between restricted version and unrestricted version??
Which are the main differences??
Thanks
David

Hi.
Basically restricted version has encryption enabled and unrestricted not.
You may give a look to this thread.
https://supportforums.cisco.com/discussion/11409366/restricted-version-and-unrestricted-version-ccm-comparison
HTH
Regards
Carlo

Similar Messages

Difference between ECC 6.0 and earlier versions

Hi,
one of the difference between ECC 6.0 and earlier versions is that instead 'WS_UPLOAD' and 'WS_DOWNLOAD' in ECC we should use 'GUI_UPLOAD' and 'GUI_DOWNLOAD' respectively.
(of course SPDD and SPRO tcodes is known by everone i suppose)
Similarly can u all put down some differences here, atleast one entry by each, I think we can make a good docu. I have searched the net for the differences but could not get much, so by each of us contributing one each, it would become good docu..for all of us.
Thanx in advance

Unicode Errors Encountered and their Solutions
E1. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified.
     Error:
     OPEN DATASET FILE FOR OUTPUT IN TEXT MODE.
     Solution:
     OPEN DATASET FILE FOR OUTPUT IN LEGACY TEXT MODE.
E2. In Unicode, DESCRIBE DISTANCE can only be used with the IN BYTE MODE or IN
      CHARACTER MODE addition.
     Error:
     DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIEBO01 INTO BPOS.
     Solution:
DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIENR01 INTO BPOS
IN CHARACTER MODE.
E3. u201CUSR02-UFLAGu201D must be a byte-type field (Typ X or XSTRING )
     Error:
     IF USR02-UFLAG O YULOCK.
     Solution: Since the data type of USR02-UFLAG is type INT and is compared with data type
                X u2013 Hence the error. So we define a new variable ZULOCK and assign the
                value of USR02-UFLAG to ZULOCK.
              New variable
              DATA: ZULOCK(1) TYPE X.   "APBRP00
              Assign value
                            ZULOCK = USR02-UFLAG.
        Compare -
               IF ZULOCK = YULOCK.   u201Creplace IF USR02-UFLAG O YULOCK.
E4. HT cannot be converted to a Character type field
Error :
WRITE ht TO t_data+10(2).
Solution : Since the data type of ht is a type u2018Xu2019 and the data is been transfer to
         t_data which has a data type u2018Cu2019. value of one data type cannot be copy to
         another data type where one of them is type string .Hence the error occur,
         so the data type of ht is been change to Type u2018Cu2019
     OR
           A Tab ( value 09 ) is introduced as part of the row. The value 09 is not converted in Unicode environment. Instead we need to use class
     Error:
          DATA: BEGIN OF ht,
               x(1) TYPE x VALUE '09',
          END OF ht.
     Solution:
              Define Class after the Tables definition.
                   CLASS cl_abap_char_utilities DEFINITION LOAD.
              Data Defination : Comment internal table HT and define a variable HT type C.
       *   Insert + APRIA00 05/02/2007 Unicode project
       *   DATA: BEGIN OF ht,
     *         x(1) TYPE x VALUE '09'
       *   END OF ht.
     *   Insert - APRIA00 05/02/2007 Unicode project
       DATA HT type C.
       Before using HT assign Horizontal tab.
                 Ht = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E5. In Unicode programs the u201C#u201D cannot appear in names, as it is does here in the name    u201C#LINESu201D
     Error :
     #LINES                 TYPE I,
     Solution : Since the # is used in the start of name, it is not allowed. We need to
              remove it.
     Solution for the above
     V_LINES                 TYPE I,
E6. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified as well as the addition was required FOR OUTPUT,FOR INPUT, FOR APPENDING OR FOR UPDATE was expected.
     Error:
     OPEN DATASET PATH_NAME IN TEXT MODE.
     Solution:
     Download =     OPEN DATASET PATH_NAME FOR OUTPUT IN LEGACY TEXT MODE.
     Upload        = OPEN DATASET AUSZUG-FILE IN TEXT MODE FOR INPUT ENCODING DEFAULT.
E7. u201CTABu201D must be a character-type data object( data type C,N, D, T or String). Field string)
     Error:
            data: begin of tab,                   "Excel Parameter Split at TAB
        t type x value '09',          "Tabulator
       end of tab.
            concatenate 'Material' 'Package Status'
                into z_download-line separated by tab.
            ( In the above command the two field are to be separated with a horizontal Tab. The earlier      way of assigning the tab value u201809u2019 will not work in Unicode environment.
     Solution:
     Define a class just after the Table defination.
          CLASS cl_abap_char_utilities DEFINITION LOAD.
            Define variable Tab as shown below :
          Data : TAB           TYPE C.
     Before the concatenate statement assign the value of Tab using pre-defined attributes.
          TAB = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E8. Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not Unicode-
      enabled; use the class cl_gui_frontend_services
     Error-1: Function WS_DOWNLOAD is obsolete in Unicode environment.
            call function 'WS_DOWNLOAD'
                 exporting
                      filename = zfilename
                 tables
                      data_tab = z_download.
     Solutions-1: Instead of WS_DOWNLOAD use GUI_DOWNLOAD.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
*   BIN_FILESIZE                  =
    FILENAME                      = zfilename
TABLES
    DATA_TAB                      = z_download.
E9. The "/" character is reserved for identification of namespaces. It must be entered twice.
        The name of a namespace must be at least 3 characters long.
     Error :
                 U/N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
     Solution :
     * Special character can not be used to define a data variable
     *      U/N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
              U_N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
     * Insert - APSUS02 07/02/2007 Unicode Project
E10. "LP_TAB" and "CS_TAB" are not mutually convertible. In Unicode programs,
         "LP_TAB" must have the same structure layout as "CS_TAB", independent of the length
         of a Unicode character.
     Error : This error is encountered when data from one internal table is copied to another
                         internal table which different structure. In this case its LP_TAB & CS_TAB.
                 LP_TAB[] = CS_TAB[].
     Solution :
          * Replace + APSUS02 07/02/2007 Unicode Project
*   LP_TAB[] = CS_TAB[].
              move-corresponding CS_TAB to LP_TAB.
          * Replace + APSUS02 07/02/2007 Unicode Project
E11. Could not specify the access range automatically. This means that you need a RANGE
          addition.
     Error : Range need to be specified as an addition to the command.
            DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1).
           Solution :
            DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1)
          * Insert + APSUS02 07/02/2007 Unicode Project.
                                                      RANGE ABCD+0(4).
* Insert - APSUS02 07/02/2007 Unicode Project.
E12 . Processing Terminated Error code: Error in opening /
                                          Path not found when downloading to Unix directory.
     Error : PARAMETER: outfile(92) DEFAULT
              '/CP/interface/NPP/data/MX/cbslaprcpts'
                    LOWER CASE,
               kmxmstrd AS CHECKBOX.
            This error is encountered when the path is missing. The above path is related to CCP.
     Solution: For testing purpose comment the original path and replace it with
                                 /CP/interface/CCD/Unicode_test/
E13.    Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not                                                                       Unicode- enabled; use the class cl_gui_frontend_services
     Error: Function WS_UPLOAD is obsolete in Unicode environment. (During UCCHECK)
               Call function 'WS_UPLOAD'
       Exporting
            Filename                = zfilename
            Filetype                = u2018DATu2019
       Tables
            data_tab                = z_upload
       Exceptions
            Conversion_error        = 1
            file_open_error         = 2
            file_read_error         = 3
            invalid_table_width     = 4
            invalid_type            = 5
            no_batch                = 6
            unknown_error           = 7
            gui_refuse_filetransfer = 8
            others                  = 9.
     Solution: Instead of WS_UPLOAD use TEXT_CONVERT_XLS_TO_SAP. Do not use temporary file put the file name as it is.
1) First define a type pool and a variable of type truxs_t_text_data.
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
     2) Use this it_raw in the function module in parameter i_tab_raw_data. Put file name and the internal table in the function module.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
*     I_FIELD_SEPERATOR        =
*      i_line_header            = ' '
      i_tab_raw_data           = it_raw       " WORK TABLE
      i_filename               = zfilename
    TABLES
      i_tab_converted_data     = z_upload[]    "ACTUAL DATA
   EXCEPTIONS
      conversion_failed        = 1
      OTHERS                   = 2.
     Comment u201Ci_line headeru201D. It takes the first/ header line of the file which is to be uploaded.
Put square brackets after internal table as shown above.
E14.    CURSORHOLD may not be converted into a number.
     Error: GET CURSOR LINE CURSORHOLD VALUE CURSOR_HOLD.
     Solution: In the declaration part of CURSORHOLD, one field is of u2018Pu2019 type and one field is of u2018Iu2019 type, which is not allowed in Unicode environment.So change the the type of it to NUMC.

Difference between BI 7.0 and Prior versions

hi all,
can any one please tell me the diff between BI and BW .please send any docs or PDF'S on that if possible.and what are the new features available in BI 7.0 .please send the docs or pdf's to [email protected] help will be greatly appreciated
Thanks in advance,
ashok

Hi Ashok,
I am listing some of the imp differences between BW 3.5 and BW 7.0 below:
1. Data Modeling Flow:
a.     Create Data source
b.     Create Info source
c.     Create Transformations b/w data source and info source (earlier it was transfer rules)
d.     Create Info Package
e.     Create Info Provider (info cube or Data Store Object instead of ODS)
f.     Create Transfer rules b/w info source and data targets (instead of Update rules)
g.     Create DTP (data transfer process). To pull the data from Info package (i.e. from PSA) to Info Provider.
2. For Delta option in customized cube there is one new feature called Filter no new records which is present in DTPs of Data Store Object.
3. In Info sets now you can include Info cubes as well.
4. The Remodeling transaction helps you add new key figure and characteristics and handles historical data as well without much hassle. This is only for info cube.
5. The BI accelerator (for now only for info cubes) helps in reducing query run time by almost a factor of 10 - 100. This BI accl is a separate box and would cost more. Vendors for these would be HP or IBM.
6. The monitoring has been improved with a new portal based cockpit. Which means you would need to have an EP guy in your project for implementing the portal!
7. Search functionality has improved!! You can search any object. Not like 3.5
8. Transformations are in and routines are passed ! Yes, you can always revert to the old transactions too.
9. Data Transfer Process are in. It is used to pull the data from Info package (i.e. from PSA) to Info Provider.
Try the links given below for further details:
Check this.
Frequently Asked Questions in SAP NW 7.0 - Enterprise Data Warehousing, Reporting, Query & Analysis and Business Planning [original link is broken]
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/93eaff2d-0a01-0010-d7b4-84ac0438dacc [original link is broken]
You could get some SAP Documents here.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
These two PDF files has all almost all info about BI2004s.
Go through this Link for BI 7.0 Documents.
https://websmp101.sap-ag.de/bi
and Click on BI Standard Presentations link.
Here You can download BI 7 Documents
Refer these documents. You will get a clear idea.
New Features in BI:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4487dd91-0b01-0010-eba1-bcd6419
/people/michael.eacrett/blog/2006/06/07/whats-new-in-sap-netweaver-702004s--an-introduction-to-the-functionality-deltas-and-major-changes
BI 7.0 reporting features
http://searchsap.techtarget.com/cgi-bin/rd.pl/ftID-1121728-ctID-1064004?//expert/KnowledgebaseAnswer/0,289625,sid21_gci1064004,00.html
http://help.sap.com/saphelp_nw04s/helpdata/en/9d/24ff4009b8f223e10000000a155106/content.htm
BI 7.0 Documents:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/9280fb2d-0a01-0010-0f80-f33ab5c1606d [original link is broken]
Check this for what's new in NW2004s BI:
http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
Diff b/w BI 7.0 Vs 3.5
http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
I hope this wil give you some idea about BI 7.0
Thanks,
Ashu Gupta.

Difference between FCE 3.5 and previous version

I was considering upgrading to FCE 3.5 from FCE 3.1. I don't have an Intel-mac and was wondering if there was much of a change in features between the new and previous version that warrants the purchase.
As best I can tell, the difference seems to be more LiveType fonts/templates. But are there new features in FCE 3.5, beyond that? Marketing docs and chats with Genius Bar folks isn't clearing it up. For instance, the box says RT rendering but didn't the past version FCE HD 3 have that?
I'm defiitely biased to buy, but don't want to buy a version because it's just univeral, when i'm not running a non-Intel mac. Is there a grid somewhere that charts the differences between the two version.

Tom, could you clarify something about the new RT playback?
With 3.0 you have to stop and change the picture quality from one of three presets - High, Medium and Low. (On the Low setting more effects can be played back instantly).
Does the Dynamic RT just automatically jump around these three settings (choosing the best one) or is there an infinitely variable transition between the High and Low settings?
Furthermore, can it choose a setting lower than the Low one (in 3.0) in order to show more effects instantaneously?
In short, if I updated, would I be able to get more effects playing back than I can on my present equipment when it is in the Low setting? Or does Dynamic RT just switch automatically through the same 3 settings but give no extra playback performance?
Ian.
PS. Sorry for being so long-winded!

Difference between mastered for iTunes and previous versions?

Is there a noticeable difference between Mastered for iTunes albums and any previous versions? I purchased Bon Jovi's "Have A Nice Day (Special Edition)", and now it has been replaced with a Mastered for iTunes version. Is there any value or noticeable difference if I were to purchase the new version?

One of the inexpensive compilation downloads I purchased on iTunes was terrible, I'd much rather listen to the original mix of " I had too much to dream last night" than the remaster, which destroyed the song completely.
Well, there is really no way to improve on the sound of The Electric Prunes coming over an AM transistor radio!
I guess I'm suspicious of iTunes files in general. I am a dying breed, using separate amps and pre-amps and real speakers as well as Ultimate Ear earbuds and a great car system. The cuts that are engineered for iTunes are mixed for lo-fidelity appliances and just don't sound that good.
There are online download stores that cater to a more audiophile crowd. Check out HD Tracks.

Any difference between pre-installed apps and previous versions?

I just bought a MacBook Air. I immediately transfered everything from my Time Capsule backup of my 2008 MacBook. The software on the MacBook was completely up to date via the App Store or Software Update. It didn't occur to me to consider that the new Air came with software pre-installed until just now.
Now I'm wondering if I overwrote anything important or if the Time Capsule/Time Machine restore takes into account anything that was pre-installed or if all the software was the same already and it doesn't matter. Normally, I could just use the included restore disks that come with the computer to answer this question myself but with the new Airs, there are no disks.
So I don't really understand how something like a new MacBook Air works. If I wiped the disk and used Lion Recovery would I get everything back that was on the original installation? This seems logical but I don't know if it is true. Anyone know the details about how this works?
Thanks.

Just to double check. Go into the Purchased tab of the App store. You should see the apps are "installed". If they have a button that says "install", I'd do that.
Setup assistant knows not to copy over newer software,

Difference Between Bw 3.5 and BI 7.0 versions

Hi,
Can anyone please let me know the differences between BW 3.5 and BI 7.0 Versions . I would appreciate if you can send me a detailed file to my email ID [email protected].
Thanks in Advance ..
with regards
vikram

hi
Check these presentaions:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
http://csc-studentweb.lrc.edu/swp/Berg/BB_index_main.htm
http://csc-studentweb.lrc.edu/swp/Berg/articles/NW2004s_what_is_new.ppt
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/frameset.htm
hope it helps..
cheers.

What difference on ABAP language between 2004 version and before version

Hi everyone,
Does there exist difference about ABAP language between 2004 version and before version? If it does, what's that? For example, what's new keywords? Which old key words can't be applied on 2004 platform any more?
Any suggestion is highly appreciated.
Best Regards,
Julian

hi
good
to get all these details plz visit the SAP site where you ll get the release notes related to all the concepts.
Thanks
mrutyun^

Is there any difference between the commerical product and the Teacher/Student version?

In Adobe Photo Shop Elements 13 and Premiere Elements 13 is there any difference between the commerical product and the Teacher/Student version? I don't remember them having two versions in the past.

Is there a difference? Sure. Will it be noticable? Maybe.
The 9i client will use one of the 9i ODBC drivers. The 8i client will use one of the 8i ODBC drivers. The 9i drivers will generally have more bug fixes & more features than the 8i drivers. It is possible, though rare, that the 9i drivers will fix a bug whose behavior your application was dependent on and/or introduce bugs that were not in the earlier version. Of course, you have to consider the different features of the underlying clients as well-- i.e. a 9.2 Oracle client cannot communicate with a 7.3.4 database, an 8i client doesn't know how to handle data types introduced in 9i (i.e. TIMESTAMP), etc.
Justin

Difference between ASA 8.3 and 8.4 IOS VERSION?

What are major differences between ASA 8.3 and 8.4 IOS VERSION?
Also data flow?

The release notes outline the differences in each version of ASA software. You can find the ASA 8.4 Release Notes here.
I don't understand what you're asking about data flow.

Is there a difference between the Apple store (box disc) version of iWork and the App store version?

Is there a difference between the iWork that can be purchased through the Apple Store and the AppStore version? There is a price difference between the two sets, and I was curious is there is a substantial difference.

The boxed versions are installed at the same time and have shared auxiliary files. When you buy them through the Mac App Store they are installed individually and the auxiliary files that they could share are installed individually, so there is duplication and they take up a bit more room.
And as Kappy says, you cannot update them through the MAS, the boxed set must be updated through Software Update.

Difference between sap 4.7EE and ECC 6.0 version

Hi
can any one help me out '' difference between sap 4.7EE and ECC 6.0 version''
i want to prepare ppt on this topic.

Hi,
Hi,
Refer this link for ECC 5.0 & 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
A similar post
/message/1783778#1783778 [original link is broken]
You can go through the Release Notes for each of the versions after 4.6B (4.6C, 4.7 , ECC 5.0 & ECC 6.0)
http://help.sap.com/saphelp_erp2005/helpdata/en/43/688055b88f297ee10000000a422035/content.htm
For 4.7 SAP R/3 http://help.sap.com/saphelp_47x200/helpdata/en/12/9d78d6d8f74043a32e82be87e433b7/content.htm
Release Notes on SAP Web Application Server 6.30
http://help.sap.com/saphelp_47x200/helpdata/en/2b/64fc3e9d3b6927e10000000a114084/content.htm
http://solutionbrowser.erp.sap.fmpmedia.com/
Hope this helps.
Regards
Sudheer

Difference between CRM 5.0 and 4.0 version.

Hello Experts,
Please let me know the exacat difference between CRM 5.0 version and 4.0 version.
Please let me know.
Thanks

Hi Koti,
There are some significant differences between CRM 4.0 and CRM 5.0.
1. IC Web : Locking and Handling of entities should be handled explicitly in CRM
                  4.0 where as the same is handled implicitly in CRM 5.0.
2. In 4.0 most of the Std Classes can be inherited but in 5.0 most of the Std
   Classes cannot be inherited as they are made as Final Classes.
3. CRM 5.0 and 5.1 so on.... versions have introduced CRM specific User Interface which is very flexible and simplified as you can jus drag and drop the objects for creation of custom application.
Thanks
Siva

What is difference between Oracle version and DB version.

What is the difference between Oracle version and DB Version?
How we came to know about the installed version through SQL query.

SQL> select * from v$version;
BANNER
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
PL/SQL Release 8.1.7.0.0 - Production
CORE 8.1.7.0.0 Production
TNS for Linux: Version 8.1.7.0.0 - Development
NLSRTL Version 3.4.1.0.0 - Production
SQL>
Joel P�rez

Difference between Planning Version and Simulation Version

Hi friends,
What is the difference between Planning Version and Simulation Version?
Thanks,
Debi

Debi
There are a lot of threads in this forum that give detailed info about version concept. Also you can refer to help.sap.
Anyways , planning version is the version against which your live cache data is stored. The data against this version is the one that the planners and buyers are going to refer to or use to make their planning and buying decisions. Data against the planning version is nothing but data relevant to the business .
There may be instances where you would like to simulate some scenario. If you want to do trial and error analysis and at the same time if you do not want to impact the actual business data , then you create simulation versions and simulate your scenario.
For example your actual sales orders received for the month of March may be 100 CS. This is the actual number that will be stored against your planning version. Lets say the demand planner wants to find out what will be the impact if there is a sudden bulk demand from a new customer for 500 CS - that is if he wants to do a what - if analysis then he can create a simulation version and try to check the impact .
Thanks
Aparna

Difference between UCOS restricted version and unrestricted version

Similar Messages

Maybe you are looking for