Difference between WF Notifications Search and Find Notifications

Hi
i wants to know the difference between Find Notifications and WF Notifications Search .When i am using WF Notifications Search it is allowing any body to approve any notification .
Thanks
Mohan

why I can view everything in the WF Notification Search is because I also have the Workflow Administrator Responsibility where I can see and act on everything.
So the issue is resolved.
Thanks
Mohan

Similar Messages

  • Difference between Oracle Ultra Search and Intermedia Search

    hi,
    Can any one please tell me how Oracle Ultra Search is Different from Intermedia Search .from an article i came to know that Ultra search helps you to search dataq in Multiple RDBMS ,documents,URLs etc . but i think these options are also there in Intermedia
    regds
    sangeeth

    These are Oracle Text questions. Intermedia Text is now Oracle Text and has it's own forum. Please post Oracle Text qestions in the Oracle Text Forum where you will get a better, quicker answer. The Oracle Text forum is frequently monitored by Oracle text experts, this forum may be occasionally scanned by these experts, or not at all.

  • I did re-set my password and when I click on Install for Mavericks, I still get a box for "administrator password" and it still won't accept my new password. Is there a difference between my Apple ID and the administrator password they're asking for?

    I downloaded Mavericks and it won't install. I did re-set my password and when I click on Install for Mavericks, I still get a box for "administrator password" and it still won't accept my new password. Is there a difference between my Apple ID and the administrator password they're asking for? I never had an administrator password-- I just hit enter and have never had a problem before with previous installations. I'm on an iMac, from 2007, running Mt. Lion (version 10.8.5). I've been looking for other's posts who may be having the same problem, but haven't found any. Can anyone help?

    Ugh. The 'no password, no work' thing is a recent Apple development. I ran into it on my system and ended up having to do a clean install on a partition I fully erased.
    I suppose, if you have the ability to, go online and look up how to burn a bootable DVD image. Download the 10.8.4 image then use the Disk Utility to make a boot image of it. You'll need a dual-layer DVD or a USB drive (or memory stick at least 8GB) If you've got an optical drive, burn the disk, if you've a USB device, use that.
    Then get a pocket drive and copy your important files off the system or let Time Machine do a full backup.
    When the backup is done, insert the disk and hold down the C key until the machine boots off of the DVD. At the point you get to the start window, go to the menu and choose the Disk Utility.
    In the Disk Utility, reformat the drive. You go to the actual DRIVE (not the Macintosh HD, but the root above it that is the actual hard drive device)
    I always do this and *partition* it into several volumes, the benefit being, you can store all of your music, documents and importans stuff on that secondary storage volume you make - it will have it's own index and then the first volume is where you put the OS and it will have it's own index as well. That way, if the OS throws a wobbler and you need to reinstall, you don't lose your data.
    Depending on the size of your hard drive, it is good to give your OS partition at least 60GB and optimally 100GB, and the rest for storage.
    Name your volumes, use the little box sliders to manually size them or put that number in the size window, select for the format, Mac OS Extended (Journaled) and hit Apply and then the Disk Utility will quickly create your new partitions.
    Once finished, quit the Utility and it will return you to the OS installer. Select the volume you want to install to and it should start up and install.
    Once the installation is done, you'll get the new machine startup then you MUST put in a password for the computer. Once you're in, and to the desktop, don't bother with any Mountain Lion updates, go right to the App Store and get the Mavericks update and let it install the app to your Applicaitons folder, then do that install.
    On a side note, there MAY be a way to make a disk image from the Mavericks application and avoid the entire Mountain Lion step.. I honestly do not know, but a bit of hitting the search engines may find out if there is. I think that if you looked for "make Mavericks boot disk or boot image' you may find something.
    Good luck!

  • From ABAP view, what is the difference between version 4.7 and ECC 6.0 ?

    Hi,
    I am a ABAP developer. I want to know the difference between version 4.7 and ECC 6.0 from a programmer
    perspective.
    I also want to know  what is obsoleted and what is enhanced.
    Thanks.
    Best Regards,
    Chris Gu

    I'm not sure if any of this is in your 4.7 version, but I know it wasn't available in our 4.6C before we upgraded and we have found the following extremely helpful in ECC 6.0:
    1.  The new ABAP Debugger - Search SDN and you'll probably find a bunch of info on these enhancements
    2.  The Enhancement Framework - this is a great new framework allowing enhancements to standard SAP programs without having to use "core Mods".  Had we known about it prior to our upgrade, we could have probably eliminated 75% or so of our custom Z Programs which are copies of standard SAP code  and 100% of our core mods (of which we only have a handful)
    3. Code Inspector and more importantly the ability to turn it on to automatically run when releasing a transport.
    4. The ABAP workbench has changed a bit with a new editor including some minimal code completion.
    5.  Automatic generation of services from any remote enabled function module.
    These are just a few of the things that I've found helpful in an upgraded environment.

  • Difference between 4.7 version and 6.0 version

    what is the difference between 4.7 version and 6.0 version particularly as far as SD is concerned?

    dear vinayak
    There are so many differences between the version in different objects
    I will explain in two or more objects the difference
    1 in the customer master in 4.6 version there is no partner function tab in the customer in xd01 t-code
    and also there is no CIN tab in that version
    but it is there in the 4.7 EE version
    This is the major change from the 4.6cc to 4.7EE
    2. in 4.7EE there is some settings that are related for CIN
    which cannot be done in 4.7EE that means they need some patches for doing the configuration setting for the CIN
    But we can do the same in the 6.0 version
    These are the some of the settings that are differed in the two versions and in that two objects
    Re: Difference Between SAP Version ECC 4.6, 4.7, SAP 5.0, 6.0 with SA
    Re: SAP version differences 4.5b, 4.6c and ECC6.0
    You can find the difference in release notes of each SAP version.
    Here are the links.
    http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
    http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
    Please visit the following links:
    http://service.sap.com/erp
    http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
    http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
    For Functionality Differences pls refer to the below site -
    http://solutionbrowser.erp.sap.fmpmedia.com/
    After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
    Select the Solution Area like Financials, Human Capital Management, Sales....
    Select module like MM, PP, SD, QM.....
    Click on Search
    Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
    and also check the release notes of ECC 6.0 in service.sap.com.
    rewards if it helps
    siva

  • ,difference between PSA 3.5 and PSA BI-7

    Hi,
    Please some one  tell me the difference between PSA 3.5 and PSA BI-7 , Actually i searched in the forum also but i didn't get difference but i could find the other Datasorce .... etc differences.
    Thanks,
    GAL
    Edited by: GAL BI on Feb 5, 2009 8:45 PM

    Hi,
    There is no difference technically as it still remains the flat table structure as it was in 3.5
    The kind of partitions and way it was organised in the system is still the same.
    Its just that the way it is used now has been changed from 3.5 and again I will give you the same answer of data source.
    Now it has been made mandatory to load the data from R/3 first to PSA and then further to the targets.
    This PSA has no difference from the PSA in the 3.5 as the deifintion persistence staging area can be given to any table which stores the data in as it is form....and in 7.0 they are doing the same role which they were doing in 3.5 that is storing data as it is.
    Now the PSA has become data source specific and not target specific as it was in 3.5.
    now the data source in 7.0 are having the PSA  and will come into play only when the object will be used as data source for futher updates whereas in 3.5 it was more like a  target which use to have a kind of  PSA attached to it since the PSA used to have a structure same as transfer structure which was possible to change.
    Hope I am clear.
    Thanks
    Ajeet

  • Difference between BPC for MS and BPC for NW

    Hi All,
    I'm looking for some comparative analysis between BPC for MS and BPC for NW. Can you please give me your points or direct me to some link/material where I can find such stuff.
    Primarily I'm focusing on following two points:
    - How would the integration to SAP BI work (=differences between SAP BPC (NW) and SAP BPC (MS))?
    Could the same degree of automation be established?
    - I was told that  SAP BPC (MS) could be much faster implemented than the NW version. Is this really the case? Why?
    I would really appreciate your earliest response.
    Regards,
    Shabbar

    Hi,
    BPC for MS runs on Microsoft platform where as BPC for NW runs on SAP Netweaver.
    BPC for NW is tightly integrated with SAP BI all the dimensions and applications created in BPC NW can be seen in BI system in the form of Infoobject (dimensions) and Infocubes (applications).
    Performance depends on the complexity and scalability of the project. BPC for NW may undergo lots of improvements and developments in future versions.
    search SDN u will get help.
    Hope this helps
    Regards

  • The difference between AIR-ANT5135D-R and AIR-ANT5135DB-R

    Hi,
    Anyone know what is the difference between AIR-ANT5135D-R and  AIR-ANT5135DB-R ?
    From the dynamic configuration tools for 1252 and 1242, AIR-ANT2422DB-R is inside one of the antenna option.
    However, I can't find it in the "Cisco Aironet Antennas and Accessories Reference  Guide"
    http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/product_data_sheet09186a008008883b.html
    Inside the document there is only AIR-ANT5135D-R.
    likewise for the 2.4 GHz,  AIR-ANT2422DB-R is inside the dynamic configuration tools and not inside "Cisco Aironet Antennas and Accessories Reference  Guide"
    Any help would be appreciated
    Thanks,
    Richard

    Found the difference, AIR-ANT5135DB-R and       AIR-ANT2422DB-R are  non-articulating antennas.
    Thanks!
    Richard

  • What is difference between  Service map iview and Workset Map iview

    Hi Experts,
                        Can anyone tell me the difference between  service map iView and Workset Map iView.
    When I am creating these iViews, its seams both are same. I canu2019t find difference still, can anyone help me out of this
    Thanks in Advance
    Janardhan

    Hi,
    Service Map Iview:The Service Map iView is an ERP-specific variant of the portal Workset Map iView. It serves as a central point of entry and guided access to the services of SAP service modules such as the Manager Self Service (MSS) module, or the Employee Self Service (ESS) module.
    Workset Map iview:A Workset Map is the equivalent of a site map, providing users with explicit information on the functionality that is available in a given workset. It is based on an iView, and serves as a central point of entry and guided access to the contents of a workset.
    if you want to more info pls go thr the below thread
    Workset Map iView
    i hope it will help you
    Thanks,
    Sreeni.

  • What is the difference between Wine, Wineskin, Winery and Wine Bottler, and how do I get Wine to *ACTUALLY* work in Mountain Lion?

    Ok, so this is my first post here and I am admittedly terrible at forums. Someone might say, "This was addressed in the ___________ thread by __________! Go read it!" --- that may be so but I've spent enough hours trying to google this problem into submission to no avail based on what is apparently working for others, so I would like a chance to get specific answers to specific questions that aren't from Mar 2011, etc.
    So first of all, I'm confused by all the various Wine programs/apps/whatevers. I've seen Wine, Wineskin, Winery, Wine Bottler, and at this point I wouldn't be surprised if there are even more than that. What's the difference between all of these and how do they work with one another? What do I actually need to get windows programs working?
    All of my google searches have led me to people giving out fish, but no one giving out fishing lessons. I'm not a pro at mac and windows and all that, but I'm a fairly bright individual who gets VERY frustrated, very quickly, when I don't understand the why and how of something I'm attempting.
    I've also found "answers" where the person attempting to help starts off helpful enough, but degrades into the most archaic of techno-babble after about 5-6 sentences. On the other hand, I've watched tutorials on youtube where the poster decides to skip (apparently crucial) sections of the tutorial, and mutters such gems as: "... you might wanna have to run Wine first before you can do anything, cuz I think it has to configure it and set up a bunch of stuff" 
    O.o
    A happy medium between techno-babble and the most basic of explanations would be ideal for me, and I'd imagine for others as well.
    Here is a summarized history of my relationship with Wine:
    Diablo II - I downloaded this awesome thing which ended up being... uh... I guess Diablo II in a Wineskin "wrapper". I'm not sure, all I know is that it's a D2 icon, and if I go to 'show package contents', it's got C drive, Program Files, et cetera inside of it. I double click it, it launches D2, and it works like a dream. <3
    'Vanilla Install' - That's what I heard someone call it. It was the command/terminal style install using xquartz and xcode found at http://www.davidbaumgold.com/tutorials/wine-mac/. I followed every instruction to the letter, and got all the way to '$ sudo port install wine', at which point it started going smoothly, free from the possible error he described regarding the installation of xcode, and then just failed after I left the room to use the restroom and came back. Please don't ask me to repeat what the error was, because honestly, after reading more things on the interwebs, I'm confused as to why it's even necessary to go through all of that, so I'd rather not try that route again anyways, rendering the error message quite possibly irrelevant.
    Wine + Wine Bottler - So I decided to try to seek out an easier method, as I know that one must exist that doesn't involve command lines. I found a video tutorial at http://www.youtube.com/watch?v=m0BBkISOcEA, and oh man would it be great if that method had actually worked. Again, I followed all instructions provided to procure my free fish, and at the point in the video where he declares that "xquarts or x11 will open" - it doesn't open. Nothing opens. I was trying to install Star Sonata, btw.
    So here I am, thoroughly worn out, frustrated at all the random places Wine is installed on my mac now, and just want someone to explain it all, from top down, without getting toooooooo technical on me. I know that might be asking a lot...

    ## I know that the poster has already found a solution, but the following is a possible answer for others that have similar issues.
    For Winebottler, just go to their website and download it. Run the program. Choose .wine as your prefix (best choice) or whatever suits you best. You'll need a functional X11. If you can't use the one that comes with your mac, download the latest one from the website.
    If your issue is one with Winebottler's Wine not running correctly due to X11, then you have a pretty ugly problem, although a simple upgrade is the best solution (Upgrade XQuartz.app).
    http://www.davidbaumgold.com/tutorials/wine-mac/#part-1
    The above website is the easiest way to get REAL wine on your computer. First of all, Wineskin WInery, etc. are NOT WINE. They are 3rd party apps that may use Wine or may have originally part of Wine, but they are no longer up to date with Wine. WineBottler is currently up to date with the stable releases of Wine (but not the maintenence releases).
    For the website tutorial and to run Wine on your mac without using a thrid party app, you will need to know a few things.
    First, you will need to know basic control of the command line. That means, sudo (you must know the administrator password to your computer), and the forms of cd (change directory).
    Second, you will need Xcode. Download 4.2 (stable) or whatever other versions you want, but beware: It is over 1 GB, and you will need time for it to work.
    Third, you will need to get MacPorts and configure it. The tutorial should have this data.
    When you download wine (use sudo port install wine-devel for the latest development release of wine), it will first download a lot of dependencies. This will take a while. After that, it will download wine itself.
    After obtaining wine, to run a program, open the terminal.app window.
    cd desktop/XYZ/ZYZ\ WRQ
    The above will first enter the desktop, then folder XYZ, then folder ZYZ WRQ. From here,
    wine th11e.exe
    Or whatever executable you are trying to open. (Using Subterranean Animism as my example).
    It should, in theory, run the program. Watch the terminal for errors. If there is an X11 problem, then it's not wine acting up. If the app crashes or has other issues, check the Wine Application Database to see if your app is compatible with wine.
    If you have any further questions or other things, feel free to reply; I may or may not get back to you, but there's a good chance that someone will come in eventually. Otherwise, the Wine Wiki should have some information.

  • Difference between GR/IR trade and GR/IR non trade GL account

    Hello,
    can anyone let me know what is the difference between GR/IR trade and GR/IR non trade GL accounts and how are they automatically determined during a GR or IR?
    Thanks,
    Edited by: sapuser3 on Jul 17, 2009 2:57 PM

    Hi,
    Re: MR11, F.13, F.19 ,what's the differences?
    Next time please search SCN forum before posting.
    Best regards, Christian

  • What is the difference between NetWeaver 7.3 and NetWeaver 7.03?

    Hi Experts,
    Can anydoby explain me the difference between NetWeaver 7.3 and NetWeaver 7.03? or say difference between NetWeaver 7.2 and NetWeaver 7.02?
    I have been confused by these 2 terms. As far as I know, the features of AS ABAP in NetWeaver 7.3 and NetWeaver 7.03 are almost same. The same applies to NetWeaver 7.2 and NetWeaver 7.02.
    BTW, as I know the BS2011 are based on NetWeaver 7.03, PI 7.3 are based on NetWeaver 7.3.
    Thanks and Best Regards
    Fei
    Moderator message: not directly related to ABAP development, please search for available information, e.g. in the Netweaver forums.
    Edited by: Thomas Zloch on Mar 1, 2012

    Vivianemt wrote:
    I have an Olympus OM D E 5, I think only Lightroom 4.3 is useable.
    The Olympus OM-D E-M5 was first supported in Lightroom 4.1
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    Vivianemt wrote:
    Can I upgrade from  LR 4 to 4.3??
    Yes, all 4.x dot releases (updates) are free of charge to all version 4 owners.
    You only pay again for the next major version upgrade = version 5  unless you're a Cloud member where all upgrades and updates are included in the membership fee.

  • Difference between ECC 6.0 and earlier versions

    Hi,
    one of the difference between ECC 6.0 and earlier versions is that instead 'WS_UPLOAD'  and 'WS_DOWNLOAD' in ECC we should use 'GUI_UPLOAD' and 'GUI_DOWNLOAD'  respectively.
    (of course SPDD and SPRO tcodes is known by everone i suppose)
    Similarly can u all put down some differences here, atleast one entry by each, I think we can make a good docu. I have searched the net for the differences but could not get much, so by each of us contributing one each, it would become good docu..for all of us.
    Thanx in advance

    Unicode Errors Encountered and their Solutions
    E1. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified.
         Error:
         OPEN DATASET FILE FOR OUTPUT IN TEXT MODE.
         Solution:
         OPEN DATASET FILE FOR OUTPUT IN LEGACY TEXT MODE.
    E2. In Unicode, DESCRIBE DISTANCE can only be used with the IN BYTE MODE  or  IN
          CHARACTER MODE  addition.
         Error:
         DESCRIBE DISTANCE  BETWEEN T_KOMK AND T_KOMK-HIEBO01 INTO BPOS.
         Solution:
    DESCRIBE DISTANCE  BETWEEN T_KOMK AND T_KOMK-HIENR01 INTO BPOS
    IN CHARACTER MODE.
    E3. u201CUSR02-UFLAGu201D must be a byte-type field (Typ X or XSTRING )
         Error:
         IF USR02-UFLAG O YULOCK.
         Solution:  Since the data type of USR02-UFLAG is type INT and is compared with data type
                    X u2013 Hence the error. So we  define a new variable ZULOCK and assign the
                    value of USR02-UFLAG to ZULOCK.
                  New variable             
                  DATA: ZULOCK(1) TYPE X.   "APBRP00
                  Assign value               
                                ZULOCK = USR02-UFLAG.
            Compare -
                   IF ZULOCK = YULOCK.   u201Creplace IF USR02-UFLAG O YULOCK.
    E4.  HT cannot be converted to a Character type field
    Error :
    WRITE ht TO t_data+10(2).
    Solution : Since the data type of ht is a type u2018Xu2019 and the data is been transfer to
             t_data which has a data type u2018Cu2019. value of one data type cannot be copy to
             another data type where one of them is type string .Hence the error occur,
             so the data type of ht is been change to Type u2018Cu2019
         OR
               A Tab ( value 09 ) is introduced as part of the row. The value 09 is not converted in Unicode environment. Instead we need to use class
         Error:
              DATA: BEGIN OF ht,
                   x(1) TYPE x VALUE '09',
              END OF ht.
         Solution:
                  Define Class after the Tables definition.
                       CLASS cl_abap_char_utilities DEFINITION LOAD.
                  Data Defination :  Comment internal table HT and define a variable HT type C.
           *   Insert + APRIA00 05/02/2007 Unicode project
           *   DATA: BEGIN OF ht,
         *         x(1) TYPE x VALUE '09'
           *   END OF ht.
         *   Insert - APRIA00 05/02/2007 Unicode project
           DATA HT type C.
           Before using HT assign Horizontal tab.
                     Ht = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.  
    E5.  In Unicode programs the u201C#u201D cannot appear in names, as it is does here in the name    u201C#LINESu201D
         Error :
         #LINES                 TYPE I,
         Solution : Since the # is used in the start of name, it is not allowed. We need to
                  remove it. 
         Solution for the above
         V_LINES                 TYPE I,
    E6. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified as well as the addition was required FOR OUTPUT,FOR INPUT, FOR APPENDING OR FOR UPDATE was expected.
         Error:
         OPEN DATASET PATH_NAME IN TEXT MODE.
         Solution:
         Download =     OPEN DATASET PATH_NAME FOR OUTPUT IN LEGACY TEXT MODE.
         Upload        =  OPEN DATASET AUSZUG-FILE IN TEXT MODE FOR INPUT ENCODING DEFAULT.
    E7. u201CTABu201D must be a character-type data object( data type C,N, D, T or String). Field string)    
         Error:
                data: begin of tab,                   "Excel Parameter Split at TAB
            t type x value '09',          "Tabulator
           end of tab.
                concatenate 'Material' 'Package Status'
                    into z_download-line separated by tab.
                ( In the above command  the two field are to be separated with a horizontal Tab. The earlier      way of assigning the tab value u201809u2019 will not work in Unicode environment.
         Solution:
         Define a  class just after the Table defination.
              CLASS cl_abap_char_utilities DEFINITION LOAD.
                Define  variable Tab as shown below :
              Data : TAB           TYPE C.
         Before the concatenate statement assign the value of Tab using pre-defined attributes.
              TAB = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
    E8. Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not Unicode-
          enabled; use the class cl_gui_frontend_services     
         Error-1:  Function WS_DOWNLOAD is obsolete in Unicode environment.
                call function 'WS_DOWNLOAD'
                     exporting
                          filename = zfilename
                     tables
                          data_tab = z_download.
         Solutions-1: Instead of WS_DOWNLOAD use  GUI_DOWNLOAD.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
    *   BIN_FILESIZE                  =
        FILENAME                      = zfilename
      TABLES
        DATA_TAB                      = z_download.
    E9.  The "/" character is reserved for identification of namespaces. It must be entered twice.
            The name  of a namespace must be at least 3 characters long.
         Error :      
                     U/N(3)        TYPE C,  "U/N    --> ERSETZT DURCH SPACE
         Solution :
         * Special character can not be used to define a data variable
         *      U/N(3)        TYPE C,  "U/N    --> ERSETZT DURCH SPACE
                  U_N(3)        TYPE C,  "U/N    --> ERSETZT DURCH SPACE
         * Insert - APSUS02 07/02/2007 Unicode Project
    E10.  "LP_TAB" and "CS_TAB" are not mutually convertible. In Unicode programs,
             "LP_TAB" must have the same structure layout as "CS_TAB", independent of the length
             of a Unicode character.
         Error : This error is encountered when data from one internal table is copied to another
                             internal table which different structure. In this case its LP_TAB & CS_TAB.
                     LP_TAB[] = CS_TAB[].
         Solution :
              * Replace + APSUS02 07/02/2007  Unicode Project
    *   LP_TAB[] = CS_TAB[].
                  move-corresponding CS_TAB to LP_TAB.
              * Replace + APSUS02 07/02/2007  Unicode Project
    E11.  Could not specify the access range automatically. This means that you need a RANGE
              addition.          
         Error :  Range need to be specified as an addition to the command.
                DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1).
               Solution : 
                DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1)
              * Insert + APSUS02 07/02/2007  Unicode Project.
                                                          RANGE ABCD+0(4).
    * Insert - APSUS02 07/02/2007  Unicode Project.
    E12 .  Processing Terminated Error code: Error in opening /
                                              Path not found when downloading to Unix directory.
         Error : PARAMETER: outfile(92) DEFAULT
                  '/CP/interface/NPP/data/MX/cbslaprcpts'
                        LOWER CASE,
                   kmxmstrd AS CHECKBOX.
                This error is encountered when the path is missing. The above path is related to CCP.
         Solution:  For testing purpose comment the original path and replace it with
                                     /CP/interface/CCD/Unicode_test/ 
    E13.    Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not                                                                       Unicode- enabled; use the class cl_gui_frontend_services
         Error: Function WS_UPLOAD is obsolete in Unicode environment. (During UCCHECK)
                   Call function 'WS_UPLOAD'
           Exporting
                Filename                = zfilename
                Filetype                = u2018DATu2019
           Tables
                data_tab                = z_upload
           Exceptions
                Conversion_error        = 1
                file_open_error         = 2
                file_read_error         = 3
                invalid_table_width     = 4
                invalid_type            = 5
                no_batch                = 6
                unknown_error           = 7
                gui_refuse_filetransfer = 8
                others                  = 9.
         Solution: Instead of WS_UPLOAD use TEXT_CONVERT_XLS_TO_SAP. Do not use temporary file put the file name as it is.
    1) First define a type pool and a variable of type truxs_t_text_data.
    TYPE-POOLS: truxs.
    DATA: it_raw TYPE truxs_t_text_data.
         2) Use this it_raw in the function module in parameter i_tab_raw_data. Put file name and the internal table in the function module.
    CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
        EXPORTING
    *     I_FIELD_SEPERATOR        =
    *      i_line_header            =  ' '
          i_tab_raw_data           =  it_raw       " WORK TABLE
          i_filename               =  zfilename
        TABLES
          i_tab_converted_data     = z_upload[]    "ACTUAL DATA
       EXCEPTIONS
          conversion_failed        = 1
          OTHERS                   = 2.
         Comment u201Ci_line headeru201D. It takes the first/ header line of the file which is to be uploaded.
    Put  square brackets after internal table as shown above.
    E14.    CURSORHOLD may not be converted into a number.
         Error:  GET CURSOR LINE CURSORHOLD VALUE CURSOR_HOLD.
         Solution: In the declaration part of CURSORHOLD, one field is of u2018Pu2019 type and one field is of u2018Iu2019 type, which is not allowed in Unicode environment.So change the the type of it to NUMC.  

  • Difference between Logic Pro 9 and Logic Studio?

    I have garage band and I notice that the instruments available are extremely limited, so I am looking to upgrade solely for the idea of getting more instruments and more features. Does the app store Logic Pro 9 have the extensive amount of official instruments to download for free? Or are there additional costs if you are looking to purchase the instruments for the app store logic 9?
    I know that the studio version has mainstage, compressor and other programs etc, but what I am looking to find out is if there is a difference between what instruments, resources and materials found in the $210 Logic 9 and the Logic Studio version that you can't download for free from inside Logic 9?
    Thanks

    Hi
    Segall wrote:
    Does the app store Logic Pro 9 have the extensive amount of official instruments to download for free?
    The instruments themselves are embedded within the Logic application, with the exception of the sample libraries for the EXS24 and Ultrabeat. All of the content, including the various Jampacks and sample libraries are available to download
    Segall wrote:
    Or are there additional costs if you are looking to purchase the instruments for the app store logic 9?
    No.... free
    Segall wrote:
    I know that the studio version has mainstage, compressor and other programs etc, but what I am looking to find out is if there is a difference between what instruments, resources and materials found in the $210 Logic 9 and the Logic Studio version that you can't download for free from inside Logic 9?
    The "Studio" DVD's include the now defunct Soundtrack Pro, which had around 20G of loops, beds and sound FX. Some of that material is now available for Final Cut X.
    A few utility programs are also missing (Waveburner etc).
    CCT

  • Difference between Crsytal Report 2011 and Crystal Report for Enterprise 4

    difference between Crystal Report 2011 and Crystal Report for Enterprise 4.0?
    I think Crystl Reprt 2011 has more function, is it right?

    Hi,
    I recently attended a SAP Virtual trianing on SAP Business Objects BI 4.0.
    Here are few extracts from that which probably shows some light to you:
    SAP Crystal Reports 2011
    1. UI and associated processing servers remain the same as CR 2008
    2. Incremental update to CR 2008 with a few new features*
    3. Continue to provide current CR 2008 functionality as-is for existing customers
    SAP Crystal Reports for Enterprise 4.0
    1. Major update & redesign of the Crystal Reports Designer and associated processing servers
    2. Focus on streamlined report design, reporting against BI 4.0 Universe, & reporting against SAP BW data
    3. Provide the foundation for all future releases of Crystal Reports
    Differences between these two releases:
    Data Source & Usage Type                                       General Recommendation
    1. SAP BusinessObjects BI 4.0                                        SAP Crystal Reports Relational Universe (UNX) for Enterprise
    OLAP Universe (UNX)
    2. SAP NetWeaver BW 7 BEx Query (BICS)                    SAP Crystal Reports for Enterprise
    3. SAP NetWeaver BW 3.5 BEx Query                             SAP Crystal Reports 2011
    4. SAP Profitability Cost Management                              SAP Crystal Reports for Enterprise through Analysis View
    SAP Strategy Management
    SAP Budget, Planning and Consolidation
    SAP Extended Analytics
    5. Platform Driven Alerting                                                SAP Crystal Reports for Enterprise
    6. Business Views                                                           SAP Crystal Reports 2011
    7. Direct RDBMS or OLAP access                                    SAP Crystal Reports 2011
        SAP ERP/ Live Office Content/
        Enterprise search content
    Regards
    Gowtham

  • Difference between XI 3.0 and XI 7.0

    What is the Difference between XI 3.0 and XI 7.0?
    ( functionality & architecture wise)

    Hi,
    There is no new features added in PI7.0, if u have working on XI 3.0, PI7.0 Older versions the features same..
    But PI7.1 there is new changes u can find below.....
    Integarte SAP & Non-SAP Legacy system
    PI 7.1 is based on open, web service enabled standards and
    Integrate all SAP and non-SAP, A2A, B2B, BPM, service enabling and BAM
    Highlight of enhancement in PI7.1
    1) Enterprise Service repository (ESR) contains the design Registry
    2) Includes significant high-volume message processing is supported by message processed in a single
    Service call
    3) Also importantly support for asynchronous messaging based Reliable Messaging (WS-RM) for both
    Brokered communication between two systems will be supported in this release.
    4) Provide Service Registry benefits based on UDDI 3.0
    Enterprise Service Repository
    In PI7.1 ES Repository is at the heart of Enterprise SOA
    ES Repository is really the master data repository of service objects for Enterprise SOA
    It contains the definition & process of services
    In ES Repository has two parts, one is the ES Repository and the other being the Services Registry
    ES Repository (ESR) is really the master data repository of service objects for Enterprise SOA
    Besides service definition the ES Repository also provides you with a central point for finding and
    Managing service metadata from different sources, including application deployments - this is
    Where the Services Registry comes in. The Services Registry is the UDDI part of the ESR which
    Enables service consumers to find services
    The SAP XI Integration Repository used by process integration has become the basis of the central Enterprise Service Repository: powering Enterprise SOA and Service Enablement.
    Objects in the ES Repository include:
    Global Data Types (CCTS based)
    Process Component Models
    Executable Integration Processes (BPEL)
    Integration Scenarios
    Service Interfaces (Enterprise Services)
    Interface Mappings
    Enterprise Services built in the ES Repository
    Enterprise Services includes:
    Are built using a consistent enterprise model based on: GDTs, Process Components, and Business Objects.
    Are based on open standards.
    Are mapped to the Service Interface object in the ES Repository.
    Global Data Types - Building blocks for Service Interfaces
    Defined in the ES Repository
    Defined company-wide based on open standards (ISO 15000-5, UN/CEFACT CCTS)
    Reusable semantic building blocks for service interfaces and message types
    Process Component Models
    Drill down from high-level models to service interfaces and operations
    Process component architecture models enable SOA governance
    Process components expose on enterprise services, which are based on service operations
    Web Services Reliable Messaging (WS-RM)
    Asynchronous messaging (EO, EOIO) based on open WS standard
    Support Business Activity Monitoring (BAM)
    Embedded Event Infrastructure: Collecting, pre-filtering and publication of events across SAP and non-SAP systems.
    Event handling: cast the local event to an event proxy to send out event messages to event Consumers.
    Transaction SWF_BAM for event filtering via filter rules and event handling.
    Enhancement for Mapping
    Re-usable user defined functions.
    Look-up function reads multiple fields.
    Synchronous DB RFC lookups: Use graphical function to model look-ups.
    Specify mapping parameters at configuration time.
    Principle Propagation based on SAML
    This feature uses the WS-RM protocol.
    The implementation of this feature is based on the open standard SAML and can
    be used with backend systems that support the SAML technology.
    Forward user context from sender to receiver.
    Authorization check in receiving system based on original user.
    Support BAM Milestone Modeling (BPEL)
    Sub-Process Calls: Integration Process Call,
    User Interaction: User Decisions (initially not part of this project, but will be covered as well to draw the complete picture),
    Alert Categories
    Enhancements for Process Automation
    Human interaction:
    Integration paradigm (design/ configuration).
    Generic user decision.
    Language dependent texts for end-user display, enriched with variables.
    WS-BPEL 2.0 adoption: Preview and implementation BPEL4People, BPEL-SPE Simple user defined functions can be configured directly in the process.
    reward points if helpful...
    PrasHanT

Maybe you are looking for