Difference between X-Fi XtremeMusic & E-MU 0404

What is the difference if use these sound cards for sample recordind, also my guitar is connected to PC?

gitaro2 wrote:
What is the difference if use these sound cards for sample recordind, also my guitar is connected to PC?
How (directly, through pre-amp, ....)?
In generally, not much in that what you're thinking to do but,
- E-MU 0404 PCI (I assume you mean PCI version) has better converters than ExtremeMusic
- 0404 is a stereo card (though, supports 5.1 surround audio through S/PDIF (IIRC)) when X-Fi supports 7.1
- E-MU patchmix application is good but can be hard to learn
- 0404 has no HW synth onboard (you need to use VSTi/DXi instruments for MIDI data when X-Fi has couple HW synths onboard)
- w/ 0404, you need an additional amp for headphones (if you prefer to monitor through E-MU)
There are plenty of differences between these cards ...
Anyway, w/ both cards, you'll need an external pre-amp for line sources (like guitar) and for microphones.
jutapa

Similar Messages

  • Differences between sound car

    I'm a little confused. what's the difference between?x-fi xtrememusic and x-fi xtremegaming?And what makes x-fi xtremegaming fidelty pro better, except for the "x-ram", than the ordinary x-fi xtremegaming?

    From what I can see and have read, not much is different between the music and gamer cards. Software specifically for music I think is included with the music card. Probably something specific is included for the gamer card the music card doesn't have. Other than that, nothing. And your observation between the fatality and the gamer is pretty much correct. No other differences that I can tell and to me not worth the addition cost as most games do not yet take advantage of the ram, plus creative's shoty drivers especially on Vista made an easy choice for me. Although if I were you, I would seriously look for alternati'ves to any of Creative's sound cards unless you are prepared for major headaches especially if you are running VIsta.

  • The Difference Between?

    Ok so I believe I know the answer here but asking anyway.
    What is the difference between the adobe creative cloud team license vs the adobe creative cloud enterprise license?
    is the team licence basically individually licences products per account users?
    and is the enterprise one license that covers multiple users at once?
    Thanks and sorry for the question but had to verify.

    Hi tbirdbrent ,
    Thank you for posting on the forums, the answer to your question is as follows.
    1) Creative Cloud for teams brings together the very latest Creative Cloud desktop apps, updates and upgrades the moment they’re released, and all of the services and business features your team needs to create their best work and collaborate with their peers. Adobe offers two Creative Cloud for teams plans — you can opt for a complete plan (all apps and services) or a single-app plan such as Photoshop CC (access to one app and select services). With each option, you’ll receive access to the same easy-to-use web-based admin console that allows the administrator to centrally purchase, deploy, and manage all seats across your organization — whether single app or complete — under one membership agreement.
    2) Creative Cloud for enterprise is for organizations with large deployments that require centralized provisioning and customized deployment of apps and services. Enterprises also receive enterprise customer support and expert services. Creative Cloud for enterprise also works with Digital Publishing Suite; Adobe Anywhere for video; and Adobe Marketing Cloud, which includes Adobe Experience Manager — all sold separately.
    Also, the team licences is not individually licences products per account users and the same goes with the enterprise license.
    Thanks,
    Vikrantt Singh

  • What is difference between sy-tabix and sy-index.

    SAP Seniors,
    Can you please let me know what is difference between sy-index and sy-tabix.
    I read the SAP help, it is confusing for me. it looks like both are same from help. please help me.
    Thank you
    Anitha.

    HI,
        Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
    SY-TABIX
    Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
    APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
    COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
    LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
    READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
    SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
    SY-INDEX
    In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
    Hope this helps.
    Thank you,
    Pavan.

  • Difference between sy-tabix and sy-index?

    tell me about sy-tabix and sy-index?what is the difference between sy-tabix and sy-index?
    Moderator Message: Please search before posting. Read the [Forum Rules Of Engagement |https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] for further details.
    Edited by: Suhas Saha on Jun 18, 2011 5:33 PM

    HI,
        Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
    SY-TABIX
    Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
    APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
    COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
    LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
    READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
    SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
    SY-INDEX
    In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
    Hope this helps.
    Thank you,
    Pavan.

  • What is difference between sy-index and sy-tabix and where both are using ?

    what is difference between sy-index and sy-tabix and where both are using ?

    hi nagaraju
    sy-tabix is in Internal table, current line index. So it can only be used while looping at the internal table.
    sy-index is in Loops, number of current pass. This you can use in other loop statements also (like do-enddo loop, while-endwhile)
    SY-INDEX is a counter for following loops: do...enddo, while..endwhile
    SY-TABIX is a counter for LOOP...ENDLOOP, READ TABLE...
    Here is an example from which you can understand the difference between sy-tabix and sy-index.
    Itab is an internal table with the following data in it.
    id Name
    198 XYZ
    475 ABC
    545 PQR.
    loop at itab where id > 300.
    write :/ itab-id, itab-name , sy-tabix, sy-index.
    endloop.
    My output will be :
    475 ABC 2 1
    545 PQR 3 2
    Sy-tabix is the index of the record in internal table.
    sy-index gives the no of times of loop passes.
    So, for the first record in the output (475 ABC), 2 is the index of the record in internal table and as it is first time loop pass occured, sy-index value is 1.
    Regards,
    navjot
    award points

  • Difference between sy-index & sy-tabix

    Dear friends,
    Please tell me the difference between sy-index & sy-tabix
    Actually my problem is i don't know how to compare for example between first record'field n and second record'field n when u r in loop so i can take particular action based on result
    on current recor
    if possible send me sample code.
    Regards;
    Parag Gavkar.

    SY-TABIX:
    Current line in an internal table. With the following statements SY-TABIX is set for index tables. With hashed tables, SY-TABIX is not filled or it is set to 0.
    - APPEND sets SY-TABIX to the index of the last table row, that is the total number of entries in the target table.
    - COLLECT sets SY-TABIX to the index of the existing or appended table row. With hashed tables, SY-TABIX is set to 0.
    - LOOP AT sets SY-TABIX to the index of the current table row at the beginning of every loop pass. After leaving a loop, SY-TABIX is set to the value it had before entering the loop. With hashed tables, SY-TABIX is set to 0.
    - READ TABLE sets SY-TABIX to the index of the table row read. If no row is found with binary search while reading, SY-TABIX contains the index of the next-highest row or the total number of rows +1. If no row is found with linear search while reading, SY-TABIX is undefined.
    - SEARCH itab FOR sets SY-TABIX to the index of the table row, in which the search string was found.
    SY-INDEX:
    SY-INDEX contains the number of loop passes in DO and WHILE loops, including the current loop pass.
    Regards,
    Santosh

  • Difference between Null and null?

    What is the difference between null and NULL?
    When is each used?
    Thanks,

    veryConfused wrote:
    There is a null in java, but no NULL. null means no value. However, when assigning value, the following is different:Although the empty String has no special role. Null means, the referential type is not assigned (doesn't refer) to a specific object. The empty String is just another object though, so seeing it or pointing it out as something special when it actually isn't at all (no more special than new Integer(0) or new Object[0]) just adds to the confusion.

  • Blends: Difference between open and closed paths modifying spine

    Okay, just had a discovery today about the blend tool.
    The difference between closed paths and open paths is critical when you want to modify a blend spine, such as make it curve. Between open paths, there is no spine shown when a blend is created. Ever notice this? Between closed paths, there is a spine, which can be modified, such as making it curved. Now, the trick is how to modify a spine with open paths when there is no spine shown. Found out today that starting with a closed path, segments can be deleted to make the path open, then the spine can be modified and the open path state maintained!
    This is a huge bug in Illustrator and makes no sense to me. Wanting Adobe to fix this in the next major release. Hope this helps anyone struggling with this issue.

    One thing you should be aware of concerning open ended splines:
    It makes an enormous difference as to how the blend behaves whether the endpoints have handles or not.
    Give them handles and you will find that you can alter the distribution of the blend objects just by adjusting the handles or by dragging on the spline itself.
    Give it a try.

  • Difference between cleared items,open items and all postings (FI).

    Hi experts,
    Can anybody tell me the difference between cleared items,open items and all postings for an account.
    While running corresponding bapis and transaction FAGLL03 (for GL) or FBL1N (for accounts payable) i found that in some cases all postings is less than cleared items or open items for a time period. How could it happen.According to my knowledge all postings should contain cleared items and open items.
    Please correct me..
    Thanks and Regards
    Arjun

    Hi Arjun,
    For every Billing Documnet created(VBRK/VBRP-VBELN) there will be an accounting document created in BSID/BSAD tables.
    OPEN ITEMS means the Billed/Invoice Amounts that are pending from Customers, i.e which we have to receive from Customers.
    CLOSED ITEMS means the AMOUNTS received from that customer.
    OPEN ITEMS : fetch data from BSID table Only
    CLOSED ITEMS : fetch data from BSAD only.
    ALL POSTINGS : fetch data from both BSID and BSAD.
    Hope this will help.
    Regards,
    Nitin.

  • Disk Utility: Differences between "Zero Out Data" and "7-Pass Erase"?

    I'm wondering if anyone knows if there's a significant difference between the "Zero Out Data" erase option in Disk Utility (specifically Disk Utility 10.5.5), and the "7-Pass Erase" and "35-Pass Erase" options in same software.
    Here's why I'm asking: I have a co-worker with an iMac G5 20" 1.8GHz with 160GB internal hard drive. As a result of the power supply overheating a week ago due to dust, some hard drive problems resulted. I'm trying to assess whether these are 'soft' formatting problems that can be recovered from, or 'hard' problems requiring replacement of the hard drive and/or power supply.
    Following the failure, I removed the dust and restored the iMac to servicable form. The power supply seems to be OK now. The next thing was to attempt to recover as much data as possible from the 160GB, as the last full backup was a week old. Carbon Copy Cloner, shell copy via 'sudo cp -p -R -v', Finder copy, and DiskWarrior recovery all met with problems. TechTool Pro identified a huge swatch of unreadable sectors during repeated surface scans. Unfortunately, these unreadable sectors were located midway in the OSX boot partition (an 80GB partition), and not in the other 80GB partition devoted to lower priority video data.
    When I was satisfied I had backed up the data to the best of my abilities, I next set out to reformat the drive and see if the bad sectors could be eliminated or remapped out of existence. I did a "Zero Out Data" erasure in Disk Utility (with no errors during the erase), but TechTool Pro showed the bad sectors persisted in equal strength at the same location. I next executed a sixteen hour "7-Pass Erase" (again no errors, and confirming that it takes about an hour per 10GB). The next day when I ran TechTool pro, all of the sector errors had disappeared. I'm a bit perplexed as to why the "7-Pass Erase" seems to have recovered the use of the drive. Is it possible that there are simply thousands of bad sectors now remapped that I'm not seeing? [If so, how do I check for this?] TechTool Pro has not reported any S.M.A.R.T. issues to date on the drive. What am I to make of that?
    There are some related threads I've checked into, but I'm not sure how to properly assess my situation based on this information:
    <http://discussions.apple.com/thread.jspa?threadID=232007>
    <http://discussions.apple.com/thread.jspa?threadID=138559>
    <http://discussions.apple.com/thread.jspa?threadID=118455>
    Since the iMac has three weeks left on it's one year warranty, and I've already moved the user to another machine temporarily, I'm thinking that the smart thing to so is to send it in to Apple to have them look at the power supply and hard drive. That way, when it returns, even if there is still a lingering hardware problem, at least it will be covered under warranty for another 90 days.
    Any thoughts?
    iMac G5 20" 1.8GHz   Mac OS X (10.4.6)   1.25GB RAM, 160GB hard disk, SuperDrive

    HI, Bret.
    The only differences between "Zero Out Data", "7-Pass Erase", and "35-Pass Erase" are the number of times a binary zero is written to every bit on the disk. "Zero Out Data" writes a binary zero once, whereas the 7- and 35-Pass options write a zero seven and 35 times, respectively.
    Technically, one pass with Zero Out Data should be sufficient to map bad sectors out of service, a process also known as sparing. If a bad sector is encountered, it is both marked as "in use" in the directory's allocation table and added to the directory's "bad blocks file."
    My understanding is that the Surface Scan of Tech Tool Pro should identify bad sectors every time it is run unless the bad sectors have been locked out by the drive controller of the ATA drive itself. This is because Surface Scan checks the entire surface of the disk.
    What may have happened is that running "Zero Out Data" spared the bad blocks from a directory standpoint, but did not result in the drive's controller locking out those sectors for reasons detailed in the "Surface Scan" section of the Tech Tool Pro manual. However, the 7-Pass Erase may have resulted in the drive's controller locking out the bad sectors and why Surface Scan did not pick them up after such.
    Given the problems you described, I concur with your plan to have Apple check the affected computer. You might also want to consider purchasing an AppleCare Protection Plan for that Mac: I recommend and buy these for all my Macs.
    For some additional information on bad sectors, see the "Bad Sectors" section of my "Resolving Disk, Permission, and Cache Corruption" FAQ.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Difference between GUI_UPLOAD and WS_UPLOAD

    Hi,
    Please make me clear about the difference between GUI_UPLOAD and WS_UPLOAD. In which cases we need to use these modules...??
    Thanks,
    Satish

    I would suggest to always use the GUI_UPLOAD.  I say this because this is the function module which is used in the GUI_UPLOAD method of the class CL_GUI_FRONTEND_SERVICES.   Really, you should probably use the class/method instead of the function module.
      data: filename type string.
      filename = p_file.
      call method cl_gui_frontend_services=>gui_upload
             exporting
                  filename                = filename
                  filetype                = 'ASC'
             changing
                  data_tab                = iflatf
             exceptions
                  file_open_error         = 1
                  file_read_error         = 2
                  no_batch                = 3
                  gui_refuse_filetransfer = 4
                  no_authority            = 6
                  unknown_error           = 7
                  bad_data_format         = 8
                  unknown_dp_error        = 12
                  access_denied           = 13
                  others                  = 17.
    Regards,
    Rich Heilman

  • Difference between char and varchar, also the difference between varchar2

    Hi,
    Can anyone explain me the difference between char and varchar, and also the difference between varchar and varchar2...

    Varchar2 is variable width character data type, so if you define column with width 20 and insert only one character to tis column only, one character will be stored in database. Char is not variable width so when you define column with width 20 and insert one character to this column it will be right padded with 19 spaces to desired length, so you will store 20 characters in the dattabase (follow the example 1). Varchar data type from Oracle 9i is automaticlly promoted to varchar2 (follow example 2)
    Example 1:
    SQL> create table tchar(text1 char(10), text2 varchar2(10))
    2 /
    Table created.
    SQL> insert into tchar values('krystian','krystian')
    2 /
    1 row created.
    SQL> select text1, length(text1), text2, length(text2)
    2 from tchar
    3 /
    TEXT1 LENGTH(TEXT1) TEXT2 LENGTH(TEXT2)
    krystian 10 krystian 8
    Example 2:
    create table tvarchar(text varchar(10))
    SQL> select table_name,column_name,data_type
    2 from user_tab_columns
    3 where table_name = 'TVARCHAR'
    4 /
    TABLE_NAME COLUMN_NAME DATA_TYPE
    TVARCHAR TEXT VARCHAR2
    Best Regards
    Krystian Zieja / mob

  • The difference between Lion and Mountain Lion

    Can some one explain to me the difference between Lion and Mtn Lion? I'm currently 10.6.8 Is it beneficiall for me to upgrade?

    Mountain Lion is an enhanced version of previous OS X and so that is Mavericks.
    About upgrading it all depends on what your needs are and if your hardware supports it.
    System requirements for OS X Lion
    System requirements for OS X Mountain Lion
    OS X Mavericks: System Requirements
    Please check also applications compatibility. From Lion onward, you cannot run PPC application.

  • The Difference between iphone Unlock T-Mobile and iphone Unlock Free-Sim

    As mentiond in the title my questions are:-
    - What is the Difference between iphone Unlock T-Mobile and iphone Unlock Free-Sim?!
    - Did they both work Internationally?!
    - For the Unlock T-Mobile should i use their sim or i can use any sim directly?!
    Thanks

    Unlocked means unlocked and you can use any sim card and keep changing them and the phone will never lock if it is unlocked.
    Sim free, means that the phone is sold at full price without a sim card, but the phone will lock to the first sim card that you put in it.  A sim free phone will work internationally, but you will have to use a roaming plan with your phone company because the phone will be locked, so you CANNOT change it to a local sim card.
    If you have an unlocked phone, you can use it internationally by inserting a local sim card and the phone should then work and you won't have to pay increased roaming charges as you would with a locked phone.
    If you buy a T-Mobile phone that is unlocked, DO NOT activate it with their sim card or the phone will lock to T-Mobile and you will have to approach them to get it unlocked.  Use it with another sim card straight away and it will remain unlocked.

Maybe you are looking for

  • Customizing View in Manage User Profiles page in CA

    Is there a way to add additional fields to the Manage User Profiles section in Central Administration? It is defaulted to Account Name, Preferred Name, and Email. I would like to add one of my custom columns front an center so that when I search for

  • Would Anker pro work as external battery for Macbook retina ?

    Would Anker Pro 20000 mah work as an external battery for Macbook retina ? I saw a few other options like hyper juice and energizer but I'm looking for something under $100 and preferably portable.

  • Managed Bean Best Practices

    Hi Are there any best practices for using Managed Beans? We plan to use our own custom-built JSF components. Need to understand how to design backing beans for performance/effort optimization. For example : 1. How to make managed beans thread-safe fo

  • Ribbon not showing when form is opened

    I have a 2007 application.  In it I have create the Usys... table and created 3 ribbons. 1- Hide everything 2- Ribbon for my forms 3- Ribbon for my reports I set my db option to startup with Ribbon 1, and this works.  I associated ribbon 2, in my for

  • Working with ibooks Author

    Hey guys. I've recently been doing some work with ibooks Author. I'm not sure if this is the subreddit to post my question to, so sorry if its not. My question is: How do you string a video across multiple pages within the document. I'm trying not to