Difference between xi3.0 and pi7.0

hey,
can anyone post me the difference between xi3.0 and pi7.0.
Moreover any extra configuration is required for that.
Because we need to setup xi box in client place.
please explain me in detail.
Thank u.

HI Raju,
Go throgh the following links
Differnce between XI3.0, PI 7.0 and PI7.1
Re: XI-3.0 Vs PI-7.0 Vs PI-7.1
XI 3.0 Vs PI 7.0
Regards
Sridhar Goli

Similar Messages

Difference Between PI SP12 and XI3.0 .

Hi Experts,
Can anybody help me, that the difference between PI sp12 and XI3.0?
what are all the new features in PI SP12 rather than other versions?
Thanks.

hi sreeni,
From functional point, there is no difference between XI3.0 and PI7.0. There are changes only wrt SP. For every SP release on PI7.0 a corresponding SP for XI3.0 is also released.
A comparision of the service packs in 2004 and 2004s;
in 2004 - in 2004s
SP12 & < - SP04
SP13 + 14 - SP05
SP15 - SP06
SP16 - SP07
SP17 - SP08
SP18 - SP09
For release notes ref:http://help.sap.com/saphelp_nw04/helpdata/en/cf/9844428e9cbe30e10000000a155106/frameset.htm
for more info check the links...
give me main advantages of XI-7.0 TO XI-3.0
XI 7.0 vs Xi 3.0
XI/PI
XI vs. PI
Regards
biplab
<b><i>**reward points if it helps u</i></b>

What are the Technical differences Between XI3.0/PI7.0/PI7.1

hi experts can any one give me brief idea about all the versions.
Both technically and performance point of view.

Hi,
There is no different between XI3.0 and PI 7.0 but there is a lot difference in XI3.0/PI 7.0 and PI 7.1.
Refer the below thread for Xi and PI difference:
PI 7.0 and XI 3.0
there are many threads with sme topics
New highlights for SAP NetWeaver Process Integration 7.1 are:
     Enterprise Services Repository as a central storage location for enterprise service definitions and lifecycle management data for all enterprise services
     Universal Description, Discovery, and Integration (UDDI) 3.0compliant services registry for runtime management of enterprise services
     Improved support for standards such as Web Service Reliable Messaging (WS-RM), WS Policy, Security Assertion Markup Language (SAML)
     Extended support for high volume scenarios
     Business Activity Monitoring for process definition of milestone monitoring (event correlation)
     Improved SAP NetWeaver Administrator support for central configuration and administration of both mediated and point-to-point scenarios.
     XML payload validation
     Process editor modeling enhancements: step groups, integrated alert management, configurable parameters
     Integration of human interaction (generic user decision)
     WS-BPEL 2.0 preview.
     Message Packing.
     Local Processing in Adapter Engine.
     Reusable UDFs.
     Lookup function with multiple results.
Refer the below link form where the most of the above information has been taken:
1) Capability and Enhancements of SAP NetWeaver Process Integration 7.1:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/community/capabilityandEnhancementsofSAPNetWeaverProcessIntegration7.1&
2) New SAP NetWeaver Process Integration:
/people/udo.paltzer/blog/2007/04/26/new-sap-netweaver-process-integration-release-planned-for-2007
3) Enhancement in PI 7.1:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/07/27/briefdescriptionaboutEnhancementinPI7.1&focusedCommentId=40564
4) SAP NetWeaver Process Integration 7.1 - Overview of New Capabilities:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706005a3-3bd6-2910-91ae-a2016239bdcf
5) SAP NetWeaver PI 7.1
/people/daniel.bianchin/blog/2007/12/19/all-you-wanted-to-know-about-sap-netweaver-pi-71-and-more
This section has all the relevant links for each topics:
     Enterprise Services Repository:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4073b4c4-7137-2a10-a5a9-abb618b7a5e7
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0301486-758c-2a10-9d84-a195556df422
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a4127-5403-2a10-0a96-e9452c3ab1de
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0f90f22-678c-2a10-91a0-f1f1bf7ff191
     Usability Features in SAP NetWeaver PI 7.1 Development and Configuration Times
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0e7734f-e969-2a10-24b6-df58a710941c
     Advance adapter engine:
/people/william.li/blog/2008/01/10/advanced-adapter-engine-configuration-in-pi-71
/people/william.li/blog/2008/02/07/display-adapter-synchronous-message-content-in-rwb-of-pi-71
     Preview on New Features of the Integration Directory in SAP NetWeaver Process Integration 7.1
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10c0de4b-7876-2a10-e286-8412668643a8
     Usability Features in SAP NetWeaver PI 7.1 Development and Configuration Times:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0e7734f-e969-2a10-24b6-df58a710941c
     SAP Network Blog: Share User-Defined Functions in Message Mappings of PI 7.1
/people/william.li/blog/2008/01/02/sap-pi-71-mapping-enhancements-series-share-user-defined-functions
     Preview on New Features of the Integration Directory in SAP NetWeaver Process Integration 7.1
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10c0de4b-7876-2a10-e286-8412668643a8
     SAP Network Blog: Mapping Enhancements in SAP NetWeaver Process Integration (PI) 7.1
/people/jin.shin/blog/2008/01/11/sap-pi-71-mapping-enhancements-series-mapping-enhancements-demo
     New Business Process Engine Features in SAP NetWeaver Process Integration
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0068bc1-6f8c-2a10-52bb-c6ee3562feb2
     Folders for more flexible and organized way of development.
/people/william.li/blog/2007/08/07/using-folders-in-pi-71 -- Folders in PI 7.1
     High Volume support in PI 7.1
/people/holger.faulhaber/blog/2007/12/12/high-volume-support-in-pi-71
     Upgrade to SAP NetWeaver PI 7.1
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8085e299-718c-2a10-de94-928f62b763ce
chirag

Difference between Integration Process and Monitoring Process

Hi Experts,
What is the difference between Integration Process and Monitoring Process available in PI7.1?
SAP says that Monitoring process is a special kind of integration process that receives the event messages.
My doubt is even integration process can receive the event messages.
Why these two different type of entities are created for the same purpose?
And what is the technical difference between the two in terms of PI perspective?
Regards,
Sami.

My question is now answered.
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70a25d3a-e4fa-2a10-43b5-b4169ba3eb17]
On page 17 of this pdf following sentence is mentioned :-
From technical perspective, there is no difference between monitoring process and integration process.
Though logically those are two deifferent things.
Monitoring porcesses are used to receive only event messages that is comprises of event data only.
Like Purchase order creation is a event and its event message will have the event data like Order Id, Created on, Created by, Quantity etc., instead of whole purchase order.
Where as Integration Process is a way to provide solution in some specific circummtances like where we have to automate our process or where we need something in between for the course of communication.
Guys thanks for your precious time.
Regards,
Sami.

What is difference between sy-tabix and sy-index.

SAP Seniors,
Can you please let me know what is difference between sy-index and sy-tabix.
I read the SAP help, it is confusing for me. it looks like both are same from help. please help me.
Thank you
Anitha.

HI,
Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
SY-TABIX
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY-INDEX
In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
Hope this helps.
Thank you,
Pavan.

Difference between sy-tabix and sy-index?

tell me about sy-tabix and sy-index?what is the difference between sy-tabix and sy-index?
Moderator Message: Please search before posting. Read the [Forum Rules Of Engagement |https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] for further details.
Edited by: Suhas Saha on Jun 18, 2011 5:33 PM

HI,
Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
SY-TABIX
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY-INDEX
In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
Hope this helps.
Thank you,
Pavan.

What is difference between sy-index and sy-tabix and where both are using ?

what is difference between sy-index and sy-tabix and where both are using ?

hi nagaraju
sy-tabix is in Internal table, current line index. So it can only be used while looping at the internal table.
sy-index is in Loops, number of current pass. This you can use in other loop statements also (like do-enddo loop, while-endwhile)
SY-INDEX is a counter for following loops: do...enddo, while..endwhile
SY-TABIX is a counter for LOOP...ENDLOOP, READ TABLE...
Here is an example from which you can understand the difference between sy-tabix and sy-index.
Itab is an internal table with the following data in it.
id Name
198 XYZ
475 ABC
545 PQR.
loop at itab where id > 300.
write :/ itab-id, itab-name , sy-tabix, sy-index.
endloop.
My output will be :
475 ABC 2 1
545 PQR 3 2
Sy-tabix is the index of the record in internal table.
sy-index gives the no of times of loop passes.
So, for the first record in the output (475 ABC), 2 is the index of the record in internal table and as it is first time loop pass occured, sy-index value is 1.
Regards,
navjot
award points

The difference between chapter markers and dvd studio pro markers

Does anyone know what is the difference between chapter markers and dvd studio pro markers? I can not find anywhere on Google. Also in the tutorials I have seen, suggesting DVD Studio Pro markers, but it did not mention the chapter markers.
Thanks,

"Adding Chapter and Compression Markers to Your Sequence
Once you have your edited sequence or program finished, you can add markers to the sequence for use on DVD. Markers are reference points you can place within clips or sequences that identify specific frames. There are two kinds of markers you can add that directly relate to authoring a DVD—chapter markers and compression markers.
• Chapter markers allow DVD authoring applications to create a navigable chapter list for your exported QuickTime movie. Chapter markers force MPEG keyframes (known as I-frames) at their location, since the DVD specification requires an I-frame at each chapter point.
• Compression markers identify areas of abrupt change and include two types: those that are automatically inserted by Final Cut Pro at all edit points, and those you manually place in the clip or sequence. Like chapter markers, compression markers force I-frames at their location, although in this case it is for better quality encoding, and they are not used to create a chapter list.
Note: When you export a QuickTime movie, you have an option to export various kinds of markers, including compression, chapter, or DVD Studio Pro markers. *When you choose to export DVD Studio Pro markers, Final Cut Pro actually exports chapter markers and all compression markers.* This includes compression markers you set manually, as well as ones created automatically by Final Cut Pro at edit and transition points."
From the Final Cut Pro User Manual.
So, JS was right the first time

The difference between an iphone and an ipod touch?

i want to know if the difference between an iphone and an ipod touch is just that the iphone is like a phone that has internet and is a phone. or what else is it?

The iPhone includes the same as an iPod Touch but also includes a phone, a camera, and a GPS radio.
In addition to having internet access via wi-fi, the iPhone also has internet access via the cellular network, so as long as you have cellular reception with the iPhone, you have access to the internet in addition to having access via an available wi-fi network.

The difference between system restore and last good known configuration

hi,
what is the difference between system restore and last good known configuration.
in which situation you use system restore ,and in which situation you use last good known configuration.
very short answer wil be enough.
thanks
johan
h.david

Last Known Good Configuration deals only with Starting Windows eg. a bad registry or incorrect driver is preventing Windows to start.It recovers the registry settings of HKEY_LOCAL_MACHINE\System\CurrentControlSet
While System Restore uses restore points to return your system files and settings to an earlier point in time without affecting personal files. Restore points are created automatically every week, and just before significant system events, such as the installation
of a program or device driver. You can also create a restore point manually.You can undone system restore but there is no such option in Last Known Good Configuration.
Last Known Good Configuration is disabled in Windows 8 or,Windows 8.1 by default.
Try using Last Known Good Configuration if you can't start Windows, but it started correctly the last time you turned on the computer.
Try using System Restore to return the system to an earlier point in time when things worked correctly.
S.Sengupta, Windows Entertainment and Connected Home MVP

Difference between sy-datum and any given date

Dear Friends;
I have one query regarding DATE I wanna calculate the difference between
SY-DATUM and ANY GIVEN DATE . Is there any function or code available that take one parameter as sy-datum and another parameter as any given date and give result as no. of days between them
Regards;
Parag

DATA: DATEDIFF TYPE P.
CALL FUNCTION 'SD_DATETIME_DIFFERENCE'
EXPORTING
    date1                 = '20071122'
    time1                 = '000001'
    date2                 = '20070905'
    time2                 = '000001'
IMPORTING
   DATEDIFF               = DATEDIFF
EXCEPTIONS
   INVALID_DATETIME       = 1
   OTHERS                 = 2.
Greetings,
Blag.

Difference between sy-uline and uline

Hi All,
Any one of you please update me what is the difference between sy-uline and uline. Also when i give sy-uline in top-of-page event it gives error.
Thanks
sankar

with ULINE u can specify the position from where the ULINE should start
corresponds to WRITE AT 3(10) SY-ULINE.
ULINE AT 3(10) NO-GAP will supress the spacess after the under line
ex : 1
uline at 4(10).
write : / 'My Program'.
uline at 4(10).
ex : 2
write : 'My Program' , sy-uline.

Difference between sy-datum and sy-datlo

difference between sy-datum and sy-datlo

hi,
The GET TIME statement synchronizes the time on the application server with the time on the database server and writes it to the field SY-UZEIT. SY-DATUM and the system fields for the local timezone (SY-TIMLO, SY-DATLO, and SY-ZONLO) are also reset.
SY-DATLO
Users local date, for example 19981129, 19990628,
SY-DATUM
Current application server date, for example 19981130, 19990627,
SY-DAYST
X during summertime, otherwise space.
SY-FDAYW
Factory calendar day of the week: Monday = 1 Friday = 5.
SY-TIMLO
Users local time, for example 154353, 225312,
SY-TZONE
Time difference in seconds between local time and Greenwich Mean Time (UTC), for example,
360, 10800.
SY-UZEIT
Current application server time. for example 164353, 215312,
SY-ZONLO
Users time zone, for example, EST, UTC,
reward points if useful

What is the difference between Topic Keywords and Index File Keywords?

What is the difference between Topic Keywords and Index File Keywords? Any advantages to using one over the other? Do they appear differently in the generated index?
RH9.0.2.271
I'm using Webhelp

Hi there
When you create a RoboHelp project you end up with many different ancillary files that are used to store different bits of information. Many of these files bear the name you assigned to the project at the time you created it. The index file has the project name and it ends with a .HHK file extension. (HHK meaning HTML Help Keywords)
Generally, unless you change RoboHelp's settings, you add keywords to this file and associate topics to the keywords via the Index pod. At the time you compile a CHM or generate other types of output, the file is consulted and the index is built.
As I said earlier, the default is to add keywords to the Index file until you configure RoboHelp to add the keywords to the topics themselves. Once you change this, any keyword added will become a META tag in the topic code. If your keyword is BOFFO, the META tag would look like this:
<meta name="MS-HKWD" content="BOFFO" />
When the help is compiled or generated, the Index (.HHK) file is consulted as normal, but any topics containing keywords added in this manner are also added to the Index you end up with. From the appearance perspective, the end user woudn't know the difference or be able to tell. Heck, if all you ever did was interact with the Index pod, you, as an author wouldn't know either. Well, other than the fact that the icons appear differently.
Operationally, keywords added to the topics themselves may hold an advantage in that if you were to import these topics into other projects, the Index keywords would already be present.
Hopefully this helps... Rick

Whats is difference between Java JRE and Java SDK

Hi,
what is the difference between Java JRE and Java SDK...
i think both of them have the same set of files to be installed...
I am not able to understand where they differ

The JRE (Java runtime Environment) contains just the stuff necessary to run Java and the SDK (System Development Kit) contains the extra stuff necessary (and also helpful) to develop in Java.

Difference between xi3.0 and pi7.0

Similar Messages

Maybe you are looking for