Difference betwin Allacation sttucture and source structure

< MODERATOR: Message locked. Please post in the correct forum. >
Hi friends any one explian the difference betwin allocation structure and source structure.

Hi
allocation structure defines the cost elements to be settled by cost elements. A source assignment is assigned to the allocation structure.
The source structure is used to settle costs incurred on the sender to various receivers, split by cost element. In this way, the source information is retained.
The source assignment defines the assignment of the debit cost element(s) to a receiver. More than one source assignments are summarized in one source structure

Similar Messages

Difference between source file and source structure

Hello,
I have a source file with around 60 fields. But I need to upload only 5 fields. I defined a source structure in LSMW with 5 fields and specified the file with 60 fields as the source file. But when the data is read, only 2 out of 5 fields are read. What should I do?
Thank you

Hi !!
In case you are selecting only limited fields form a file with more fields in LSMW . Please apply following consideration :
1. Add a dummy field in your source structure to make the whole structure size equal to the total width of all fields in the source file. This is because in LSMW the file is read for the length of the SOURCE STRUCTURE width only . So if i want to read only field3 in following example i still need toa dda dummy field to ensure LSMW reads a total width of source file as the FIELD3 is at absolute end of the source file from length 40 to 60 only .
For example :
if my source file ahs following firve fields : FIELD1 (10) , FIELD2(30),FIELD3 (20) .
Declare your source structure as : FIELD3 (20),FIELD_DUMMY (40) .
2. When you deifne the source file in LSMW step 7 take care to notify whether you have field names at start of file or the field order is same as
source structure .
This should close your issue or get in touch for more here buddy

Reimporting Target and Source structures

Hi,
We recently applied an OSS note (new field) and added a few fields to VBAK table and this is impacting an interface. I would like to get some help on reimporting the source and target structures. Following is the message I get in the processing log inside Message Mappings.
Target structure has no such path:
Greatly appreciate your help with this.
Thanks in advance,
Vish

Hi,
Right click on the Namespace and click on export, it will show you next steps, select whole Namespace to move, that way you wouldn't miss anything, or else you can select individual objects in the drop down and select the message mapping that you changed.
you need to export idoc structures too, right click on software component version and click export and go to individual objects in the drop down and select only the idocs that you want to move, or else you can move whole software component version so that there is no need to move namespace separately.
if you have CTS+ configured already it will create a TR, go to abap stack and type tcode SE09 and you will see a TR which is created. click on it and release the TR (there will be a truck fig on top of the screen after menu bar).
once released contact basis to import it or you can go to STMS and import it from there...
I am trying to post this since yesterday but it is not allowing me to
thanks.
Karna....

Differerence betwin distubution rules and settelment rule

< MODERATOR: Message locked. Please post this message in the [Controlling forum|SAP ERP Financials - Controlling;. >
Hi gurus any doby explain the difference betwin ditibution rule and settelment rule.

Hi friend,...
The distribution rule is part of the settlement rule. You specify the following for a settlement sender:
Settlement receiver
Settlement share (percentage or proportional)
Settlement type (periodic or cumulative)
Validity of the distribution rule
The system automatically assigns a settlement rule to the production order when the order is created. The assignment is carried out via the default rule defined in Customizing.
The settlement rule includes one or more distribution rules for the production order. The distribution rule consists of a cost receiver, a settlement share and a settlement type:
The settlement receiver determines to which cost object the actual costs of the production order are to be settled. Possible receivers include
a material
a cost center
an internal order
a sales order
a project
a network
a fixed asset
The settlement share determines the percentage rate or the equivalence number to distribute the costs to the individual cost receivers.
The settlement type determines whether all the costs are settled which were incurred for the order (full settlement) or whether the costs collected on the order are to be settled periodically (periodic settlement).
for more details u may go the following link...
http://help.sap.com/saphelp_47x200/helpdata/en/e9/7a0716cde011d19eb4080009b0db33/frameset.htm

Difference between transfer structure and extraction structure?

Hi Gurus,
Structurally what is the difference between transfer structure and extraction structure?
I have observed that both these structures have the same fields.
Then why do we need two structures in source system?
Please clarify ...
Thanks in advance

These links describe the differences between the two.
Transfer structure:
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62b2e07211d2acb80000e829fbfe/content.htm
Extraction structure:
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a627ee07211d2acb80000e829fbfe/content.htm

The source and target structure have a different number of fields

Hi,
I am new to workflow and I am trying to create an attachment in Workflow (SAP ECC 6.0) and pass it through to a User Decision (User Decision works fine) however the workflow is failing on the attachment step with u2018The source and target structure have a different number of fieldsu2019. The bindings check ok. Please see details below.
I have used document u2018Creating Attachments to Work Items or to User Decisions in Workflowsu2019 by Ramakanth Reddy for guidance. Thanks in advance.
1) Workflow containers (SWDD)
WORKITEMID (import)
ZSWR_ATT_ID (export)
SOFM (export)
2) Task Container (PFTC)
1 Import parameter defined u2013 WORKITEMID (swr_struct-workitemid)
2 Export parameters defined
- SOFM (Ref. obj. type SOFM)
- ZSWR_ATT_ID (swr_att_id-doc_id)
Binding task -> Method
Binding for 1 parameter (import) defined
Task <- Method
Binding for 2 parameters (export) defined
3) Z BOR object created with a Method, Method Parameters and Event (SWO1)
1 import parameter defined
2 export parameters defined
Method calls FM SSF_FUNCTION_MODULE_NAME, CONVERT_OTF, SCMS_XSTRING_TO_BINARY and SAP_WAPI_ATTACHMENT_ADD
Workflow is triggered by FM SAP_WAPI_CREATE_EVENT, Return_code = 0
Event_id = 00000000000000000001
Test results
A) Triggered by ABAP/ FM SAP_WAPI_CREATE_EVENT - SWI2_DIAG results
Work item 14791: object <z bor object name> method <method name> cannot be executed. The source and target structure have a different number of fields (this message is repeated 3 times). Error handling for work item 14791. No errors occurred -> details in long text (message is repeated 3 times).
Message no. WL821, OL383, WL050 in long text
B) Z BOR Test method <execute>
Enter workitem id.
Runtime error - Data objects in Unicode programs cannot be converted. The statement "MOVE src TO dst" requires that the operands "dst" and "src" are convertible. Since this statement is in a Unicode program, the special conversion rules for Unicode programs apply.
In this case, these rules were violated.
Program                             SAPLSWCD
Include                                LSWCDF00
Row                                    475
Module type                        (FORM)
Module Name                      MOVE_CONTAINER_TO_VALUE
C) Z BOR Test method <debugging>
Enter workitem id.
SAP_WAPI_ATTACHMENT_ADD, return_code = 0, message_lines = Attachment created
both swc_set_element container work ok
Runtime error occurs after end_method executed. Data objects in Unicode programs cannot be converted.
D) Workflow test
Enter workitem id <execute>
Task started> Workflow log> Status = Error
Workflow errors in Attachment step (however Office document can be viewed in details for step).

Problem has now been resolved. Problem was related to use of swr_att_id structure and swc_set_element statement in BOR program - problem resolved by only setting w/f container to swr_att_id-doc_id.

Message mapping---1 source structure and n target structures

I would like to know how many message mappings we need if we are mapping one source structure to 3 different target structures of a single receiver. I am assuming its just one message mapping.
Depending on the above answer how many interface mappings do we need.

Kalyan,
you need multi-mapping that maps one source structure to multiple target structures. Just search multi mapping in SDN and you will find many good posts.
Basically, in MM editor, go to signature tab and in the target messages add additional message types. Simple. --> Only one MM and one IM
Jayson

Structural Authorization: Difference Between AUTSW-DFCON and AUTSW-ORGPD?

Dear All,
Can anyone explain to me the difference between AUTSW-DFCON and AUTSW-ORGPD in tbale T77S0?
And what is the relationship between these two switches?
Thanks!!

HI Mr. potato,
working off dilek's informative post you may be considering ? context vs non-context?
this image explains how context problems arise in HCM. http://help.sap.com/saphelp_470/helpdata/en/b3/bfb83b5b831f3be10000000a114084/content.htm
I would say generally, when an organization decides to use structural authorizations, they also need to take into account a "context solution". This is most frequently used to "lockdown" how different parts of the HR organization has different authority access to different groups of employees (potentially overlapping). As an HR manager i might have full read access on IT0002 for the entire company (root org), but IT0008 view access only for a sub-org unit.
in this case you need to use the DFCON switch. the 'most restrictive setting for dfcon is value 2. the most iberal setting is, 4. Generally, you need to test all 4 to figure out what works for you.
settings for dfcon:
http://help.sap.com/saphelp_470/helpdata/en/56/db5bc71a64c94f9f2e3cb63e14c867/content.htm

Difference between Switching Structure in CCA and Transfer Structure in PC

Hi experts,
Could anybody define the difference between Switching Structure in CCA and Transfer Structure in CO-PCP? I can't also define when we create Primary Cost Component Split, do we use only range of Primary Cost Elements in the Cost Components for the Primary Cost Component Structure? Thanks for the help!
Best Regards,
Georgi

This has been discussed please check it in forum
https://forums.sdn.sap.com/click.jspa?searchID=480466&messageID=114309
https://forums.sdn.sap.com/click.jspa?searchID=480466&messageID=1419481
https://forums.sdn.sap.com/click.jspa?searchID=480466&messageID=1479212
Shortly:
Append structures are used for enhancements that are not included in the standard. An append structure is a structure that is assigned to exactly one table or structure. There can be more than one append structure for a table or structure.
http://help.sap.com/saphelp_erp2004/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
Includes are used to group fields, an include structure can be assigned to many tables. If you add a fields to an include structure, all tables/structures, which contain that include structure, will be updated too.
http://help.sap.com/saphelp_erp2004/helpdata/en/cf/21ea6a446011d189700000e8322d00/content.htm
Regards,
Santosh

How to handle 1 Source Structure and N ( multiple Target Structure

Hi I have One source structure , Which is Source1 and mulitple target structure which Target1 , Target2 and Target3
I need Map this Source1 to Target1 and Target2 and Target3 based on the condition of one field of source1
ianyone please tell me how to do it
Thanking you
Sridhar

Hi Sridhar,
Yes Multimapping is possible without BPM from SP14 and above. But there are certain limitation on that as well. You can do only 1:N multi mapping and N:1 is not possible without BPM. In the case of 1:N mapping you would need to go for Enhanced Interface Determination and you will have a full advantage of that mapping if you use a adapter other than IDOC, HTTP and XI. In otherwords this holds good for adapters that runs on Adapter framework and not on Integration Engine.
BPM involved:
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
Without BPM:
http://help.sap.com/saphelp_nw04/helpdata/en/42/f3b31d48fb1bc8e10000000a11466f/content.htm
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Thanks
Ravi

Difference between Append structure and include structure

hi can anyone tell me the difference between include structure and append structure with respect to tables defined in ABAP dictionary?
Also how to create them in ABAP dictionary?

HI
INCLUDE:
Includes are used to group fields and insert them together in a table or structure.
An include program has two main functions:
It contains code which can be used by several different programs.
It helps you to modularize programs, which consist of many different logically related parts. Each of these parts is stored as a separate include program.
Include programs improve the readability of programs and make maintenance easier.
Include reports contain rolled out parts of reports. They are called by the main report, and can only be run in conjunction with the main report.
APPEND:
Append structures are used for enhancements that are not included in the standard. This includes special developments, country versions and adding customer fields to any tables or structures.
An append structure is a structure that is assigned to exactly one table or structure. There can be more than one append structure for a table or structure.
The following enhancements can be made to a table or structure TAB with an append structure:
Insert new fields in TAB,
Define foreign keys for fields of TAB that already exist,
Attach search helps to fields of TAB that already exist
Just have a look at this link:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ebd6446011d189700000e8322d00/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ebd6446011d189700000e8322d00/frameset.htm</a>
Rsgards,
Gunasree.
Award marks to helpful answers

Difference between include structure and Append structure

Could you please tell me
I have bsis table and it contains append structure in 4.7 SAP System.
my program in 4.7 system contains internal table which used same structure of bsis table ( which contains additonal field in its append structure ).
I need to have same table structure in 4.6 C because I am copying the same program into 4.6 system.
As I could not append structure to bsis table in 4.6C SAP system,
instead of that shall I add the field or Shall include the structure to run .
What is the difference between Include structure and Append structure ( I forgot )
How to achieve this please help me ?

Hi ,
As you know append structure can be used only once in table ,that to at last of all entries,
Append structures are used for enhancements that are not included in the standard. This includes special developments, country versions and adding customer fields to any tables or structures.
An append structure is a structure that is assigned to exactly one table or structure. There can be more than one append structure for a table or structure.
The following enhancements can be made to a table or structure TAB with an append structure:
Insert new fields in TAB,
Define foreign keys for fields of TAB that already exist,
Attach search helps to fields of TAB that already exist,
These enhancements are part of the append structure, i.e. they must always be changed and transported with the append structure.
When a table or structure is activated, all the append structures of the table are searched and the fields of these append structures are added to the table or structure. Foreign keys and search help attachments added using the append structure are also added to the table. If an append structure is created or changed, the table or structure assigned to it is also adjusted to these changes when the append structure is activated.
Since the order of the fields in the ABAP Dictionary can differ from the order of the fields on the database, adding append structures or inserting fields in such append structures does not result in a table conversion.
The customer creates append structures in the customer namespace. The append structure is thus protected against overwriting during an upgrade. The fields in the append structure should also reside in the customer namespace, that is the field names should begin with ZZ or YY. This prevents name conflicts with fields inserted in the table by SAP.
The new versions of the standard tables are imported after an upgrade, and the fields, foreign key definitions and search help attachments contained in the append structures are added to the new standard tables at activation.
A standard table contains the fields Field 1, Field 2 and Field 3. An append structure containing the fields ZZA and ZZB is defined for this table. After activating the table, the corresponding database table contains fields Field 1, Field 2, Field 3, ZZA and ZZB.
Further Remarks:
An append structure can only be assigned to exactly one table or structure. If you want to append the same fields to several tables or structures, you can store these fields in an include structure. In this case you must create an append structure for each of these tables or structures and include the include structure there.
Adding an append structure to an SAP standard table is supported by the Modification Assistant.
If you want to insert a field that is to be delivered with the R/3 standard in the next Release in the customer system in advance, you must include it in the table itself as a repair. If you include such a field in an append structure for the table, it will occur twice when the new standard table is imported. This will result in an activation error.
No append structures may be added to tables with long fields (data types VARC, LCHR or LRAW). This is because a long field must always be the last field in the table. However, structures with long fields can be enhanced with append structures.
If a table or structure with an append structure is copied, the fields of the append structure become fields of the target table. Foreign key definitions and search help attachments appended with the append structure are copied to the target table.
Foreign keys for the appended fields must be defined within the append structure. Fields of the table or structure assigned to the append structure may be defined when assigning the key field and foreign key field.
Indexes on the appended fields must be defined in the original table.
A table or structure TAB can only be enhanced with new foreign keys or search help attachments using an append structure. You therefore cannot change an existing foreign key definition or search help attachment for a field of TAB with the append structure.
Thanks
Manju

Difference between append structure and include structure in DDIC

Plz give me the apt difference between append structure and include structure in DDIC.
Thanks in advance.
Regards
Raj

This has been discussed please check it in forum
https://forums.sdn.sap.com/click.jspa?searchID=480466&messageID=114309
https://forums.sdn.sap.com/click.jspa?searchID=480466&messageID=1419481
https://forums.sdn.sap.com/click.jspa?searchID=480466&messageID=1479212
Shortly:
Append structures are used for enhancements that are not included in the standard. An append structure is a structure that is assigned to exactly one table or structure. There can be more than one append structure for a table or structure.
http://help.sap.com/saphelp_erp2004/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
Includes are used to group fields, an include structure can be assigned to many tables. If you add a fields to an include structure, all tables/structures, which contain that include structure, will be updated too.
http://help.sap.com/saphelp_erp2004/helpdata/en/cf/21ea6a446011d189700000e8322d00/content.htm
Regards,
Santosh

Differences Btw. Counter Gate and Source Channels

I am working with a Flow Technology Turbine Flowmeter. It has a 30mv-300mv sine wave signal. I want to convert this signal into a usable pulse signal. I am trying to look for information on connecting this signal to the counter channel of my PCI card. What is the differences between the counter gate and source channels. If anyone knows where I can get this information, please let me know.

Hm. You seem to be asking two different questions:
1) Counter gate and source terminals.
It would depend on the exact hardware, but the source terminal would generally be the one that causes the counter to increment/decrement its count. The gate would control whether the source is allowed to do that. Some counter chips use the gate for more sophisticated counter control.
The best place to learn about counter/timer functions would probably be the NI-DAQmx Help that installs along with NI-DAQmx.
2) How to convert 30-300 mV sine wave to pulses. I take it that its the frequency of the sine wave that you're after.
This isn't a job for a counter. A counter requires a well-conditioned digital signal satisfying the rise-time and voltage levels of a digital signal.
You probably need to scan your signal with an analog input and then post-process it to calculate the frequency. There are a number of ways to do that- the simplest would probably be to look for zero crossings in the analog signal. I don't know Labview, but I bet there's a canned vi to do just that.Message Edited by WM John Weeks on 12-13-2005 09:08 AM
John Weeks
WaveMetrics, Inc.
Phone (503) 620-3001
Fax (503) 620-6754
www.wavemetrics.com

Same source structure and different target structure without BPM

Hi Experts,
I am using PI 7.11.My requirement is at sender side the source structure is same.Basically invoice data coming from ECC to PI as a proxy message.
Receiver side adapter is JMS.At target side ,PI has to send the invoice data to 2 receiver systems.Payment node is coming in source XML,which always comes from ECC.For one of the business system ,Payment node should be sent.For the other BS,this node should be supressed.how to achieve this with single mapping?Payload based routing is not possible in my case as i dont have any field which differentiate the receiving system name.
Regards,
Karthiga

Hi,
In receiver determination, just input the two receivers (no conditions). In message mapping, you can use the constant function called receiver to suppress or create the node. You can only test it by editing the parameters in test tab e.g
At runtime, this value (receiver) will be filled out by the entries in receiver determination. So only one mapping is needed.
Hope this helps,
Mark

Difference betwin Allacation sttucture and source structure

Similar Messages

Maybe you are looking for