Difference bw the data staging of generic and appli specefic data sources
Hi,
Can anyone tell the difference between data staging of generic and appl specific data sources. Like we know that LO data stage in queued delta, update queue and BW delta queue, i want to know actually where the generic data stages before it is loaded into BW.
Thanks.
Generic data sources are based on either a DB table/view, a function module or an ABAP query. So normally the data stages in the corresponding DB tables or you calculate it at extraction time. There is no update queue like in LO.
Best regards
Dirk
Similar Messages
-
DIFFERENCE BETWEEN THE DATA DECLARATIONS NVARCHAR2 AND VARCHAR2(x CHAR)
CAN ANYONE HELP ME FIND THE DIFFERENCE BETWEEN THE DATA DECLARATIONS; NVARCHAR2 AND VARCHAR2(x CHAR), WHERE X IS THE SIZE OF DATA TO BE HELD WITH THE VARIABLE OR ATTRIBUTE
Duplicate posting....
Difference between nvarchar2(10) and varchar2(10 char )
Difference between nvarchar2( 10) and varchar2( 10 char)
Please refer also...
Nvarchar2 -
Difference between the design of clusters PCLx and others like RFBLG etc .
There are a few nagging questions which I was not able to find in the forum hence i have to post a new question.
I am a little confused about the difference between the different clusters .
If i start with RFBLG i.e. the cluster for BSEG BSEC etc ,I can see that the tables which are part of this cluster
can be viewed through different methods like
1) whr usd list for RFBLG
2) dd02l table and give the required parameters there
now when I compare this with another so-called cluster PCL1 if find that PCL1 is not recognized as a cluster
and also I am not able to see the same in dd02l table when i give PCL1 and the tabtype as cluster which I was able to see
for the RFBLG ,there are other tables similar to RFBLG .
1) SO what is the difference between the RFBLG type of clusters and the PCLx type of cluster
2) are pclx and rfblg..type of clusters same ?
3) why does PCL1 shows that it is a transparent table ? where as rfblg shows in a diff way in se11
4) i know we access data from PCL1 using import and export stmts ,DO OR CAN WE DO THE SAME FOR RFBLG
5) I found that each and evry cluster table had diff fields ,this was kinda surprising for me as I had been thinking
that all cluster tables need to follow a certain rule ,SO WHO DECIDES THE FIELDS OF A TABLE CLUSTER ?
6) PCL1 has the index button enabled ,which again I think is not according to the cluster table rules?how?
7) I understand that we can save data in form of internal tables in the PCL1 cluster ,can we do the same in RFBLG ?
8) Can I think on lines that PCL1 and RFBLG type of cluster are two totally different types of data dictionary objects
and the usage and implementation of both of them is different and that the design and the BASE of both of such objects
is different .
I know this is a long list but I am sure that answers to these questions would really require some one who has really really work hard and invested a lot of time in understanding the dictionary system.I am awaiting a few answers ,few hints and a healthy discussion till we get them .
Thanks ...
aHello,
1/
BSEG is a typical Cluster Table.
This means that the physical table BSEG does NOT exist in the database, physical data for BSEG is stored in the database (table) cluster RFBLG.
In ABAP however you can perform selects on BSEG (with all fields from the SAP repository structure, see SE11 on BSEG), during execution the SAP database layer will translate these statements to physical selects in the RFBLG database table, so in ABAP this is transparant.
More info :
[http://help.sap.com/saphelp_nw04/helpdata/en/cf/21f083446011d189700000e8322d00/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/cf/21f083446011d189700000e8322d00/content.htm]
2/
PCL1, PCL2, ... are normal SAP transparent tables, however in HR they are often called HR cluster table.
Transparent tables are SAP objects where there is also a database table with the same name that contains the physical data.
However the PCL tables are somewhat different from normal transparent tables (data is compressed, external programs can not interpret the data, ...).
This means that in ABAP you can not use simple SQL statements to access data in PCL tables (because of compressed format).
In stead statements like EXPORT TO DATABASE and IMPORT FROM DATABASE need to be used.
More info :
[http://fuller.mit.edu/hr/cluster_tables.html|http://fuller.mit.edu/hr/cluster_tables.html]
Wim -
What is the data source name and the data target name for the table COSP
Hi,
Actaully i am new to fico/bw,and i have to create a report based on the actual and budget value and difference in the variance.
in R/3 side the table they are using is COSP,so please let me know what is the data source name and the cube or ods name in BW side.wht are the fields in which i can get the BUDGET value in the report.
here we are using all the business content extractors and BI content cubes and odss.
please reply immediately as its very jurgent isssue.
Thanks,
ashokanswered
-
Difference among the Help view,Database view and Maintanance View
hi,
can Anyone pls let me know the Difference among the Help view,Database view and Maintanance View
thanks®ards
ramaThe followings are different types of views:
Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
Go thru this link plzz
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
Projection View
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Please have a look at below link. It will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
1.Go to se11
2. select view radiobutton and give a name
3. Create
4. select type of view you want to create. Such as database view.
5. give short description
6. give a table name such as mara
7. press the pushbutton relationship. here you will find all the tables which are allowed to create view with mara.
8. select one or mane tables.
8 copy
9.save , check and activate.
The followings are different types of views:
Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
Go thru this link plzz
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
Projection View
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Please have a look at below link. It will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
Go thru this link plzz
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
Hope this is helpful, Do reward -
What is the difference between the T.codes MC.B and MC44 ?
Hi Guys
What is the difference between the T.codes MC.B and MC44 ?
and
What is the meaning of "Key figure" ?
cheers
MaruthiRamDear,
MC.B - Mat.Anal.Selection; Turnover - Executing material tunrover basing the different selection parameters available.
MC44 - Analysis of Inventory Turnover - The key figure "inventory turnover" specifies how often average stock has been consumed. Inventory turnover is calculated as the ratio of cumulative usage to average stock level.
An inventory turnover analysis allows you to identify whether there are any "slow-moving items". It provides a basis for evaluating, for example, how effectively fixed capital has been used.
Key figure: The key figures that you can evaluate in the standard analyses for stock placement/removal and material placement/removal, provide information from the point of view of a storage area, and distinguish between internal and external warehouse movements. Both of these standard analyses are based on data that is updated to the information structure S090 when the events goods movement (external quantities), or stock removals/placements and transfer orders occur. The only difference between these analyses is the predefined standard drilldown path.
Regards,
Syed Hussain. -
I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
1. The C2WTS Windows service and C2WTS SharePoint service are both running.
2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support -
Hi,
I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
"An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
Thanks in advance.
Poomani SankaranHi Poomani,
Thanks for posting your issue,
you must have to Install SQL Server 2012 ADOMD.Net on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh -
What are the data sources for 0FIGL_V10 cube Balance Sheet and Profit& Loss
What are the data sources for 0FIGL_V10 (G/L (New): Balance Sheet and Profit and Loss) cube. and whether we can install business content regarding this.
Please help me out.
thanks,
sapsdnhelpHi,
Check this:-------
Urgent: Relevant Master Data Data Sources for FI-GL & FI-AP
http://help.sap.com/saphelp_nw04/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
Regards,
Suman
Edited by: Suman Chakravarthy on Sep 28, 2011 7:33 AM -
Problem with the data source and web.xml
I have an issue where JSC is removing my resource reference:
<resource-ref>
<description>Creator generated DataSource Reference</description>
<res-ref-name>jdbc/localOracleDatabase</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
from the web.xml and sun-web.xml.
The application has been working great in the IDE for months then wham, no more data source definition. I try and add the reference manually and the IDE takes it out. I am "NOT" adding it to the .xml's in the build area. Why is JSC removing the data source entry?This continues to be a problem. The only way that I can get around the problem is to drag a table from the data source onto the design pallete and then the datasource is added back to the web.xml. I can run fine for 10 or 15 runs then the entry is once again removed from the web.xml.
Help please! -
Differences between the "Adobe Acrobat Versions 7 and 9"
Dear Adobe Support Team,
I need to know the differences between the "Adobe Acrobat Versions 7 and 9". I have worked with Acrobat 7 and have used the same script after installing Acrobat 9 for Automation Testing with QTP for validating pdf. The object "AcroExch.AVDoc" is not getting identified as object while working in QTP in the system/machine which has Acrobat 9 installed, whereas it works well in the machine which has Acrobat 7 installed . So it will be better if two things are known as per my understanding, ie.,
it must have compatibility issue (i need the difference between "Adobe Acrobat versions 7 & 9" to assure this) or
installation issue( which can be confirmed if the former question is answered).
So i kindly request you to help me out for this scenario.
Kind Regards,
Vikraman.GCountless new features were introduced between Acrobat 7 and 9, are you really expecting us to type out a full list from memory?
If you are having specific issues with the Acrobat SDK, first refer to the Acrobat SDK for the higher version. If there remains an issue I suggest posting about the specific problem in the Acrobat SDK forum, rather than asking for an encylopedia of all possible information...
Note that Adobe do not support multiple installations of Acrobat on the same machine, so you can expect development issues if you do this. -
what is the difference between the sports edition apple watch and the normal edition, is it the bands different or do the they have different apps. Also could you take the bands off and put new ones on(change the bands)?
what is the difference between the sports edition apple watch and the normal edition, is it the bands different or do the they have different apps. Also could you take the bands off and put new ones on(change the bands)?
-
What are the differences between the Time Capsule MC344LL/A and MD032LL/A, do both have the same make of server grade hard drive, also any changes in WiFi coverage or networking abilities? Thanks
Found this info regarding original question:
What are the differences between the Time Capsule MC344LL/A and MD032LL/A, do both have the same make of server grade hard drive, also any changes in WiFi coverage or networking abilities? Thanks
http://www.hardmac.com/articles/402/page1
http://www.applefritter.com/node/23907
Hope this helps -
; >} -
Programatically change username and password if the data source
Hi all,
I searched but could not find the answer for how to programamtically change the username /password of the datasource created by the Servers tab under JSC2.
My database is Oracle and I use the logins to specify the security policy. So I would like to be able to use the username/password when the user logs in and use these info to make the connection to the database server instead of the ones I provide when creating the data source.
Thanks for your advice,
DTThe username/password can be set for the datasource via the CachedRowSet created for the datasource.
For example if you drop the sample Travel->person table on the visual designer a "personDataProvider" is created. Here's the code to set the username/password.
personDataProvider.getCachedRowset().setUsername("me");
personDataProvider.getCachedRowset().setPassword("mypassword");-David -
Whats the difference between the 4th gen iPod touch and the new one ?
whats the difference between the 4th gen iPod touch and the new one apart from it being white?
Yeah it sadly appears to be only color, I guess Apple and thier infinate wisdom decided iPod touches dont need to be as fast as the new iPhone. If it had a5 it could do Siri:(
Maybe you are looking for
-
LaserJet 100 Color MFP M175nw printing problem
When I print a page, there is a distinct area on the printed page that looks like a plastic clip or some other object is blocking the toner from transferring to the paper. It does it in both black and color. I want to know whether it is likely to be
-
Dynamic Action on DOM object not working
Thru a dynamic action I am executing PL/SQL Code that creates additional item using APEX_ITEM.CHECKBOX (see code on bottom). Thru another Dynamic action, I am trying to execute additional Java. I have it set to fire like this: Event: Click Type: DOM
-
Save the PDF Form with Field Name
HI Guys, I have the Requirment in PDF Form.The PDF Form is generated with the Adobe Live Cycle Designer.After generating the PDF Form the user filled the details in the form and save the filled form.while clicking the Save button the default PDF name
-
Photos not updating -- what's wrong?
In iPod options, I have a couple albums selected to automatically update when I sync my iPod, but no photos are getting on there. No problem with music, just photos. Any ideas?
-
when i select any video or movie in youtube to download after clicking the download button it is added to the download list but the download can't start. After closing the browser and reopen the download will start automatically.. for every time to s