Difference/ changes from XI 3.0 to PI 7.0

Can anyone post the differences between XI 3.0 and PI 7.0.

Hi Ravi,
Check the following threads as well
give me main advantages of XI-7.0 TO XI-3.0
XI 7.0 vs Xi 3.0
XI/PI
XI vs. PI
---Ram

Similar Messages

Have a 1st generation Apple TV, which is not showing as a device in iTunes. Had no problems with Apple TV until I changed from a Windows PC to an iMac. I have changed my IP address, sub mask address and router address in the Apple TV, Can anyone help?

I have a 1st generation apple TV, which was working perfectly until I changed from a Windows PC to a Imac. The Apple TV will not show in Itunes. I have changed the IP address, sub mask and Router IP address. Since changing I have switched everything of and on again. Can anyone help?

I have a new router and computer. I have just remembered that just before my old PC died on me, I transferred my iTunes library to a hard drive. I can't remember exactly just how I got my library back, but there are definately things in my library now that were in my library on my old PC! Hope this makes sense. What do you mean by same location? Do you mean in the same place in the house?
Another difference I have just thought of was my old router was connected directly to the computer bu I have not been able to do this with Sky as my PC is not near a phone socket! Will this make a difference?

On the iMac G4 can the processor be changed from 1000mhz to a 1024mhz?

On the iMac G4 can the processor be changed from 1000mhz to a 1024mhz?

It's an old iMac that my parents have and want to install a high seep (speed) Internet modem and it's requiring a 1024mhz
Ignore the requirement. 1000 is close enough to 1024 not to make a difference. They cannot be checking the speed anyway.
You may find youtub videos slow.
What version of mac os?
Here is how to find out what version of Mac OS you are running:
Click on the blue apple in the upper left hand of the screen.
click on this icon
Click on the first line, "About This Mac"
Most of these are numbers & that's what we want.
What version & Processor do you have?
You need 10.4 to get a relatively current web browser.
Opera
http://www.opera.com/browser/download/requirements/
http://www.opera.com/download/
OmniWeb 5.11, which, I believe is built on the same framework as Safari 5,
Safari 4.1.3 for Tiger
http://support.apple.com/kb/DL1069
iCab - The Taxi for the Internet
http://www.icab.de/
for PPC
tenfourfox
"World's most advanced web browser. Finely tuned for the Power PC."
http://www.floodgap.com/software/tenfourfox/
alternative download site:
http://www.macupdate.com/app/mac/37761/tenfourfox
What is my user agent?
http://whatsmyuseragent.com/
A larger list:
http://www.macmaps.com/browser.html

Pricing type in copy controls is changed from "D" to "B" Impact

Hi,
what would be major impact on pricing if pricing type in copy controls is changed from "D" to "B".
Source document-contract
Target document-returns, now it is D but client want it to B.
This is not Standard, but would like to now the impacts on pricing.
Regards,
Vinod.

I want the impact
Imagine the client's original billing price was INR 500.00 but in pricing condition, INR 800.00 is maintained. Now in this case, as you said, in copy control, if you maintain "B", then while creating return order, system will consider INR 800.00 and accordingly, credit note will also be generated. Hence, the client is loosing the difference in excess of billing to the extent of quantity flowing in credit note.
G. Lakshmipathi

Color Balance Adj Layer Characteristics Changed from CS4- CS5?

Maybe some guru with better connections to Adobe knows the answer to this. (or maybe I just forgot).
I just discovered (and I don't think it is pilot error) that the characteristic behavior of the Color Balance Adjustment Layer is different in CS5 than it was in CS4/CS3. (Much stronger in CS4/CS3).
In addition, there is also an associated behavior that is like a buried legacy mode that is not made visible to the user. Here is what I mean.
If I create an image in CS4 with a single Color Balance Adj Layer, I get an adjusted image.
If I open that same PSD file in CS5, the same image is displayed.
If I use the same base image, yet create the Color Balance Adj Layer from within CS5, the adjusted image is different than the prior two.   So the Color Adjustment Layer acts like it has a hidden legacy mode where the characteristics are one type if created in CS4/CS3 yet a different characteristic if created in CS5.
My mind might be slipping (or my cold has the better of me) because I do not remember this as a documented change and I searched the internet for "What's new in CS5" etc etc. I don't remember anything on other forums about this either.
I guess the good news is, the new characteristic of the Color Balance Adjustment Layer is better behaved with a transfer curve with less clipping for highlights and shadows. Very similar to the better behavior of the change of the Brightness/Contrast Adjustment Layer going from CS2 to CS3.
Here are some comparison images.
This is the Layer Stack Used with Base Image of simple B to W gradient with CB Layer on top with just the highlights pegged to red. This is the exact same Layer Stack for all of the images shown:
Here is the first image. This was created in PS CS4 and displayed from CS4 with the conditions show above:
This is the same image from above that was saved as PSD with profile and them imported to PS CS5 with same profile. There was no change:
This next image is using the same base gradient, yet then creating the CB Layer from within PS CS5 with the same parameters, only the Red pegged for the Highlights:
Does someone have an easy answer for this. Can someone duplicate this and confirm the change from CS4 to CS5. A test by someone else would either confirm I am off base with pilot error or there is something to this.
And yes, all the images were sRGB and kept in sRGB for creation/display. All Screenshot images were the images brought up side by side on the same color managed monitor.   All Edit > Color Settings were identical.
Thanks in advance for any help
John

OK, Chris, but before I perform my act of self flaggelation for the benefit for all and my extra embarrassment, let me add in some useful information about the Color Balance Adj Layer that could be helpful.
I was working with another individual who wanted a better understanding the color balance adj layer, what is was exactly doing, how the shadows, midtones, and highlights interacted, and the differences with preserve luminosity checked or not, and also why the preserve luminosity was so hard to predict (e.g. did not really preserve luminoisty).
Without going into the deails of all of that, the tidbit I will leave as far as penance for my stupid original post above is that the Color Balance Adj Layer with the Preserve Luminosity box checked does a reasonable job or preserving luminoisty for the midtone adjustments yet definitely does not for the shadow and highlight adjustments.
An easy workaround for this is to just set the Color Balance Adj Layer Blend to Color which preserves Luminosity of the image presented from lower layers while maintaining the Color as best it can from using the CB Adj Layer (It holds the Hue and does its best to keep the same Saturation yet the Luminoisty from the presented image from lower layers takes prescendence). This does a much better job at preserving Luminosity than using the checkbox option.    I usually use this approach and keep the Preserve Luminiosity box turned off.
The error that I made was during the fairly involved exchange with this other individual, at some point I accidentally set the Layer Mask for the CB Adj Layer to 50% gray and did not notice that it had changed from the default white. Much further down the line, when this other individual could not exactly recreate my results, he mentioned working in CS3. Thinking this odd, I pulled up CS3, created the image from scratch (without the erroneous mask change to 50% gray) so therefore I duplicated his results and did not realize the error was in my original Layer Stack. To make a long story short, I went and checked for differences in all system settings, profiles, Color Settings, opacity settings, Blend settings, Layer Style settings (and their options) etc, etc and overlooked a change in the Mask gray level.       When I quickly flashed back and forth between the two documents/stack it finally popped out at me. Mea Culpa.

Table structure changes from PS HRMS 8.3 & 8.8 to PS 9.1

Hi,
Is there any delivered report (or) excel sheet explaining the table structure changes from PS HRMS 8.3 & 8.8 to PS 9.1
Any help on this highly appreciated.
Thanks
Soundappan
Edited by: Soundappan on Nov 1, 2012 7:04 PM

I'm not sure to understand what kind of module you're talking about.
Anyway, there are several docs available in MOS which shows the features differences over the versions, have a look :
PeopleTools Cumulative Feature Overview Tool ID 793143.1*
But I didn't find any starting by your (very old) Peopletools version.
Nicolas.

Satellite A300-1OM wirless connection changed from connected to limited

I am having issues with continual use of the internet via my wireless home network, which appears to be an intermittent problem.
On many occasions while using my wireless internet connection the connection has changed from 'connected' to 'limited connectivity', which then leads to difficulty opening the 'Network and Sharing Centre' and also 'Connect To a Wireless Network' dialog boxes, and when attempting to diagnose the problem using windows it only suggests moving closer to or restarting my wireless router, which I know to be work fine as I can operate another toshiba laptop and browse the internet using the same router in the same location.
It seems the only method to repair this problem is to restart the computer, reopen the Network and Sharing Centre, click on the red 'X' between the graphic of my computer and the image of the earth (internet) allowing windows to diagnose the problem, and then choose 'turn on wireless connectivity', and after doing this the network begins operating as normal...until it repeats the malfunction a few hours later :(

I've updated the WiFi Driver and BIOS, how can I find out what Wireless standard my notebook is using? As you can imagine with an intermittent issue, I won't know if the problem is fixed until (if) it fails again.
I'm using Vista Home Premium
With regards to restarting the router, why might this make any difference when it is evident from using two toshiba notebooks side by side that the router is still providing internet access to my other notebook once this notebook has downgraded to 'limited connectivity'?
Thanks

NW2004s BI: System Changes from changes to RSCUSTV23 setting

Hi
re: NW2004s BI: System Changes from changes to RSCUSTV23 setting
We are upgrading our BW system to the new NW2004s BI version 7.0. I was wondering the system changes that were made when we changed the setting in transaction RSCUSTV23 (switched between the new Analysis Authorizations and old Reporting Authorizations).
Thanks for your help on this.
Regards.

> Does this happen to everyone or am I doing something wrong?
No it doesn't (and shouldn't) happen to everyone, but it is curious. Appearances can change if you log in as another user identity, reset Parameter RAM, the software has changed it's icon etc. (This would explain a recent iTunes icon change but not things like your keyboard preferences changing).
You might try locking Preferences down before your next update to see if that makes any difference.
The user account you're installing with has admin permissions I assume?

Delta changes from 4.6 to ECC6.0

Hi Experts,
Please help me to get delta changes from 4.6 to ECC. It will be great if you provide me indeapth info regarding this.
Thanks in advance,
Venkat

Dear Venkat,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

Mobile Carrier changed from O2 2.2 to O2 4.0 after OS3.0 update

After updating to 3.0 I noticed in Settings > General > About, my carrier had changed from O2 2.2 to O2 4.0!
Does anybody know what the difference is? Or is it just that MMS is enabled?

BTW - both of these are 3rd gen touches.

Employer discount changed from 22% to 8%

I recently sent a revalidation last month of my employment. Verizon confirmed it and continued my discount. I was getting a 22% discount, but this month's bill it is now a dismal 8%. What gives? My employer still states its a 22%.

Hi xxryu139xx! Boy, that's quite a difference in discount. Although I'd very much like to speak to the change, the terms and conditions of the agreement between Verizon Wireless and your employer are the determining factor for the discount percentage. These agreements can sometimes change from one year to the next, and can even have different percentages for employees depending on the employer's internal structure so that some employees will get different percentages than others. We assign the percentage based on the feedback we receive from the employer.
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Compare CSV - exclude if changed from this to that

I am using the Compare-object command to compare a CSV file. I am successfully using this to find the difference between two csv files:
compare-object $yesterdays $todays -Property EMPLID,GROUP_NAME -PassThru|?{$_.SideIndicator -eq '=>'}|
?{$_.GROUP_Name -eq 'FacStaffStudents14Spring' -or $_.GROUP_Name -eq 'Students14Spring'} | select * -ExcludeProperty MIDDLE_INITIAL,SideIndicator| Export-Csv $getquota -NoTypeInformation
How would I also exclude entries if they got changed from group name FacStaffStudent14Spring to Students14Spring or vice versa?

This question was actually answerable. I was able to get it figured out on another forum.
compare-object $yesterdays $todays -Property EMPLID,GROUP_NAME -PassThru | Group EmplId |
Foreach {
New-Object PSObject -Property @{
New = $_.Group | ?{ $_.SideIndicator -eq '=>' }| ?{$_.GROUP_Name -eq $FacStaffStudents -or $_.GROUP_Name -eq $Students}
Old = $_.Group | ?{ $_.SideIndicator -eq '<=' }| ?{$_.GROUP_Name -eq $FacStaffStudents -or $_.GROUP_Name -eq $Students}
} |
Where {
$hasChangedFromFacultyToStudent = $_.Old.Group_Name -eq $FacStaffStudents -and $_.New.Group_Name -eq $Students
$hasChangedFromStudentToFaculty = $_.Old.Group_Name -eq $Students -and $_.New.Group_Name -eq $FacStaffStudents
return -Not($hasChangedFromFacultyToStudent -or $hasChangedFromStudentToFaculty)
} |
Select -ExpandProperty New | ForEach-Object { $_.PURSE = "5"; $_ }|
Select * -ExcludeProperty MIDDLE_INITIAL,SideIndicator | Export-Csv $give -NoTypeInformation

Issue on payroll area which is changing from biweekly to monthly in Mid of

Dear Experts,
I have an issue on payroll area which is changing from biweekly to monthly in Mid of the Month.
One employee was retired on 29th of March, so his payroll area was changed from biweekly to monthly on 29th. For retire we are running the payroll on 8th of every month. When we are running payroll for April he has received only 29th and 30th retire salary, by the time he is not yet retired also.
In this case the main problem is monthly payroll time is early then biweekly. so the employee is getting retire salary then his regular pay.
Can you guide me where we can control that monthly payroll area should not be triggered at this movement.
Thanks
Chandra

You can do that but it is not that easy as it sounds if you have to do that over a period of say 10-20 years...lot of operational work!!
Also say if you load the retiree action one month ahead say on 03/01/2011. And the employee is retiring on 03/29.
Retire payroll is on 04/08
Biweekly is on 04/15
Now you decide to lock the employees after the 1st biweekly check of March...say which was process 14 days before 04/15 would be 04/01. The employee number is locked between 04/01 to 04/15. For 14 days you have locked these employees!!
What happens if there is adjustment pay...you have to manually go and unlock the employee and lock him after the adjustment check.
I will let you decide based on the comfort, SAP effort, Operational effort and system maintenance.

When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been. How do I do this without the document changing?

When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been. How do I do this without the document changing?
I need to be able to send it to a PC in order to print it.

Hard to say what is happening without examining the file.
If you like click on my blue name and email me both the .pages file and the the .pdf you have made from it.
Peter
ps It would help to say what version of Pages you are using and on what you are running it. iOS or Mac and what version.

TS3899 I changed from an Iphone to a Android. I can't get my email from other Iphones

I changed from an Iphone to a Android. Now I can't recieve emails from other Iphones.

Email should not be a problem, text messages can be but not email if it is set up correctly on your new phone.

Difference/ changes from XI 3.0 to PI 7.0

Similar Messages

Maybe you are looking for