Difference in ACR processed image when opened in PS CS4

I shot some images with a Sony A900 and CZ 85 lense at the weekend. I just opened one in ACR, made a couple of corrections and then opened it in PS CS4. The opened image is significantly redder than what I am seeing in the preview in ACR. The opened image is in Prophoto at 16 bit. I am using the latest patch levels on a calibrated Eizo CG222W monitor. I've never seen this happen before on other cameras.
Any suggestions?
Cheers,
Jeff

Dennis 1111 wrote:
The specs for that card say that it supports OpenGL 2.0.
But does it also support Shader Model 3?
Dennis 1111 wrote:
I'm not a Mac person so I can't give you instructions on how to make sure you have the latest driver.
The video card manufacturers DO NOT update or upgrade drives for the Mac. You're restricted to what Apple gives you built into the OS, as Apple does not issue individual driver updates or upgrades.

Similar Messages

I'm losing LIghtroom processing changes when opening photo in Photoshop. Why?

I have been using Lightroom only for a couple of weeks. For several years I used Bridge and Camera Raw for RAW file processing. After noticing that every .DNG file I process in LIghtroom 5.4 and subsequently open in Photoshop-CS4 loses the Lightroom processing in Photoshop, I conducted the following experiment:
A .dng file that had not previously been in LR catalog was placed in folder as Original DNG.dng.
File was copied and named Lightroom Processed.dng
Both files were imported into LR
The Lightroom Processed.dng file was loaded into Develop module and Exposure set to +5.00. (Note that original is underexposed by about 1 stop and at +5 the photo is almost completely washed out.)
Lightroom Processed.dng was opened in Photoshop-CS4. (There was no prompt for "Edit a copy with Lightroom adjustments". I'm assuming it was because it was a .dng file.) The original underexposed version was displayed is PS. When Ctrl-S was used to save the file, a file entitled Lightroom Processed-Edit.tif was automatically saved in the same folder and imported into LR.
I copied the Develop Settings from Lightroom Processed.dng to LIghtroom Processed-Edit.tif and the numeric exposure setting was displayed as +5.00 BUT there are slight differences in appearance and in the histogram for the .dng and .tif versions. The .tif version is very slightly darker than the .dng version.
I opened LIghtroom Processed-Edit.tif in PS. This time I was prompted to "Edit a copy with Lightroom adjustments" along with the other two options for opening a copy without adjustments or opening original. I selected "Edit a copy with Lightroom adjustments".
I can't believe that one cannot process a raw file in Lightroom and then open it in Photoshop without having the processing one does in Lightroom carry over into Photoshop. I've never had this problem using Bridge and Camera Raw. What am I doing wrong?
Thanks in advance to all who can help with this problem.

@willard, moving from a Photoshop Bridge-ACR workflow to an Lightroom workflow there are a couple important differences to be aware off.
a. ACR/Bridge uses .xmp sidecars to read and write changes to raw files(in the case of DNG files the .xmp data is stored within the file header). ACR/ Bridge cannot read the data stored in the Lightroom Catalog. The info is in the file.
b. Lightroom by default uses a Catalog file to read and write all that you do in Lightroom. The info is in the Catalog. There is also the option to have Lightroom also write info to a sidecar .xmp file or within the file header of DNG, TIFF or JPG files. This can also be achieved by using the CTRL/CMD-S. This info in the .xmp or DNG files is used by ACR/Bridge.
c. In your case the xmp data written by LR 5 which uses the equivalent of ACR 8.4 will not be fully understood by PS CS4 which uses ACR 5.x.
d. So if you open a DNG file directly in PS CS4 there will not be full compatibly. (you may have requested Lightroom to write to the DNG file but PS CS4 cannot read it all)
Quote "(There was no prompt for "Edit a copy with Lightroom adjustments". I'm assuming it was because it was a .dng file.) "
In the Lightroom Preferences General tab> Prompts> select Reset all warning dialogs.

Photoshop blurs image when opening jpeg from Nikon

Hi
My photoshop in CS6 blurs an image when opening a Jpeg this only happens on my own devices, so for example if the photo is taken on nikon DSLR, ipad or iphone. any other image, i.e. stock and downloaded and its fine.
I just cant figure out what the problem is, but essentially all my photos are uneditable because of the blurring. can any help?
Many thanks

If OpenGL drawing is disabled, then the video driver isn't too likely. Most of the problems in drivers show up with OpenGL drawing enabled.
But printer drivers and fonts can sometimes cause issues.
And there's always a chance that the video driver is failing at something simple (like drawing a menu or cursor).

Why do I keep getting an error "insufficient data for an image" when opening a document

why do I keep getting an error "insufficient data for an image" when opening a document in Adobe Reader XI 11.0.06

I am also having this problem, especially with scanned documents. Since I need to download scanned documents in my work this is a big problem!Sometimes I can read but not save the document, sometimes one or two of the pages will be blank from the start. I have the latest version of Adobe Reader XI (11.0.10). I tried reducing the page zoom, a suggested workaround on this page: Acrobat: “Insufficient data for an image” error after updating to 10.1.4 or 9.5.2, but that did not help at all. FWIW I use a Windows 8.1 PC with 4 GB RAM. I usually download PDFs from the internet using Firefox.

PDFs not displaying images when opened in Google Chrome.

My PDFs are not displaying images when opened in Chrome. They do display in other browsers and when saved to the desktop. I have tested on multiple machines. Is there a problem with how they are saved? Here is a test: http://www.omnils.com/userfiles/files/Brochures/KL-003_REV_0914_APEX_CR_SPEC_SHEET_lo.pdf

"... a known Chrome issue." The resolution lies with Google for this - nothing you can do (other than disable the "in house" browser add-on and enable Adobe's (if you have Reader or Acrobat installed)).
A similar issue exists with other, contemporary, browser releases.
The "fix" is these software houses to deploy PDF viewer browser add-ons that actually comply with ISO 32000.
Perhaps their lazy approach reflects the attitude of "Hey, Adobe will get the hit not us."
Provide your users a feed-back mechanism; you'd be able to respond with the suggestion that they ping on the appropriate software houses to provide adequate software.
Be well...

Feh showing black images when opening certain .bmp files

Hi all,
I've been using feh (I'm using imagemagick too) from quite a bit and today I noticed it shows plain black images when opening certain .bmp files, those files are obtained from a Java WebService and they may not be correcty formed, still firefox can correctly visualize them. Would it be possible to make feh correctly display them ?

I've set Photoshop to ask me if there's a conflict with embedded color schemes but it doesn't ask when opening this file. So I presume it doesn't use any specific profile. (Can I check this directly somehow?)
EDIT: I've now set to ask if there is no profile embedded and Photoshop now says that the image has no embedded RGB profile.
My color profile within Photoshop is set to sRGB which is the default for my display.
When I try switching to other RGB profiles in the list, the colors change but the distortions are still there no matter which profile I choose.

My Fonts change when opening an InDesign CS4 file with InDesign CS6

I've been experiencing strange behaviour when opening a InDesign CS4 file file with InDesign CS6: the kerning and spacing is all off:
Original file:
opened in InDesign CS6:
Is this a conversion error? Is there a setting/pref I've got wrong?

It's more than a year ago since this issue was reported, but at this time I'd had the same problem when opening a CS4 document in CS6/CC.
I was amazed that a header, placed in capitals, looked different in CS6/CC. But at last, after several tests, i've came to the conclusion that "forced" capitals behaving different than "real" capitals. In others words: when you forcing text to capitals the kerning would be different in CS6/CC. When you place text in real capitals (Shift + text) the kerning is the same as in both InDesign versions.
Text in CS4:
As you can see: in CS4 there's no difference between real capitals en forced capitals.
Below the results when opening the CS4 file in CS6/CC:
I'm not sure if there are still people struggling with this problem, but hopefully was is this helpful.

Greyed out images when opened in photoshop CS

I ahve been happily using my photoshop but recently all my images are greyed out with small white and grey boxes so cannot view or change. I have clicked on the imagine open section in history and it makes not difference. What am I doing wrong?

I shoudl warn you that although I use CS5 relatively well to edit I am not very technical so am finding all your helpful queries rather confusing. However, I have managed to look deeper into my program and the images are in RGB colour on 8 but /channel. However am working in CMYK. THe problem is that when opened the images are now in the transparency grid and in order to view them I have to Zoom in or out whic his either too large or too small to work on. I have not changed anything on the porgram from its initial settings. From Chris Cox's help i am not really sure what he means by this so please help. I am unable to find any telephone number for Adobe Help except on in the US where they tell you there is a 30 mins wait and I am based in UK. ALso not sure what extension......or what that means. Do you have a UK number I can call or help me further? Thanks Lucy

Why can't I see a preview image when opening files in InDesign?

I have "Always save preview images with documents" checked in File Handling, also with Save As. But I can only see the CS3 ID icon in my folders on the desktop, and when opening a file in InDesign. I'm running 10.4.11. Shouldn't I be able to see a preview image of the first page of an InDesign file?
Thanks!

i think those preview images means that indesign saves a lowres image of every placed image inside indd. So you can open your indd in some other computer and see all placed images even if you don´t have all the original linked hires images transferred with indd.
If you want to see your documents first page as document icon, use Bridge to browse your files. It recognizes a content of indd files and show first page as icon. .

Viewinging RAW files as thumbnail images when opening from Photoshop - not working?

I have just installed Photoshop CC on my new Windows 8.1 OS computer and when I try to open one of my RAW files into Photoshop from the Photoshop 'open file' menu item I can only see file icons rather than the thumbnail pictures that are in the folders? I can view the thumbnails just fine from Bridge but not when opening directly from Photoshop? I can view all jpg's but no RAW files (both Canon and Sony RAW). I tried installing the Microsoft Camera Codec for Windows 8.1 but it won't install - error message says "not intended for this operating system" in spite of the fact that it explicitly states it is for Windows 8.1? Any ideas on what to do to be able to view the thumbnail images?
Thanks in advance.

I have just installed Photoshop CC on my new Windows 8.1 OS computer and when I try to open one of my RAW files into Photoshop from the Photoshop 'open file' menu item I can only see file icons rather than the thumbnail pictures that are in the folders? I can view the thumbnails just fine from Bridge but not when opening directly from Photoshop? I can view all jpg's but no RAW files (both Canon and Sony RAW). I tried installing the Microsoft Camera Codec for Windows 8.1 but it won't install - error message says "not intended for this operating system" in spite of the fact that it explicitly states it is for Windows 8.1? Any ideas on what to do to be able to view the thumbnail images?
Thanks in advance.

No image when open using open image sequence

I cloned my macpro disk to a new, larger hdd using carbon copy. After doing when I open Quicktime 7 I'm unable to see an image when I..
file > open image sequence
All I see is the player, but no (first) jpg image in the sequence. I even tried paying for Q7 again and getting a new reg code See image below.

Hi,
you can try to switch between the devices when you go to START - Control Panel - Display - Settings. There you see Screen 1 and 2 and you can switch between them! Also at Advanced at Dual display settings or Extended desktop are settings which should be checked!
Bye Bob

Why fuzzy images when opened in Editor ?

When opening images in the editor the edges of the image are jagged and fuzzy.
They seem ok at 100% but at the lower magnifications, less than 50%, problem.
To me it is very noticeable and the image just looks wrong.
I have tried trial versions of Elements 8 and 9
I have the same problem on XP64 and Windows 7 64bit
My comp specs as follows:
Intel Quad
ATI Radeon HD 3400 series
Monitor ASUS VH222H
I suspect this is a software issue because the images look fine in Picasa
and other programs.
Thanks for any help.
Mike

Can you post a screenshot?

Aperture "processing" continually when opened

I open aperture and it continually is "processing" and I get the beach ball rotating. The only thing I can do is "force quit'. What does this sound like?

Deborah-
It sounds like Aperture is background processing and you should let it run.
-Allen
Some generic advice I posted in another thread is reposted below. Some of it (especially RAM comments) may apply to you, but we don't know your setup.
Aperture is a heavy pro graphics app that is very demanding of hardware. Your Mac's CPU, GPU and/or RAM are probably limiting to Aperture so we need to do what we can to optimize. Some steps:
• Set Previews to only be built manually, and only tell Aperture to build Previews when you are not otherwise editing in Aperture.
• Keep the internal drive underfilled for speed, which sooner or later usually requires using a Referenced-Masters-Library with Masters on external drives. Back up originals before importing into Aperture or any other images app.
• The Aperture Library should be on an internal drive.
• Turn off Share Previews with iLife and iWork
• Remember that HDs slow as they fill and keep the internal drive underfilled. Approx. 70% full maximum is a good guideline.
• If page outs increase significantly during operation, *max out RAM* and/or try to run Aperture by itself. On my C2D MBP with its max of 3 GB RAM I always did a restart prior to a heavy Aperture session to clear any memory leaks and make sure no other apps were open. Browsers in particular will often suck RAM Aperture would otherwise be using.
IMO all Aperture users who can should routinely bump RAM to at least 8 GB.
• Some users have observed that it can take a new Aperture installation time (weeks) to stabilize. So do not panic; and allow Aperture to continue background work by not fully shutting down the computer. Personally I never fully shut down Macs except during electrical storms.
• I recommend *always repairing Permissions* immediately before and immediately after every install of any kind.
Some folks consider it a waste of time but after years of listening to others have problems while I have had problem-free usage of heavy graphics apps (Aperture, Photoshop, Illustrator, InDesign, Dreamweaver, Painter, etc.) on multiple Macs I am fully convinced that although repairing Permissions is not a "fix" it is very useful maintenance for users of heavy graphics apps.
HTH
-Allen Wicks

Have you received "Exception processing Message" when opening iTunes?

When I attempt to open iTunes my computer gives me the following message "Exception processing message c0000013 Parameters 75b6bf9c 4 75b6bf9c 75b6bf9c" In top left corner of the window it says Windows no disk.
I have uninstalled iTunes and reinstalled but it does the same thing. What's more frustrating is when you buypass the message, open iTunes, and then try to download album art, the message pops up with every album searched. Any ideas????

hmmmm. i managed to find one discussion on that error message over at the Windows Newsgroups (they were getting it from different programs):
Discussions in Virus Discussions
(click on the post with the title "exception processing message c0000013 - AVG anti-rootkit".)
following up on their investigations ... do you have a pen drive or some other similar drive installed on your PC?

"Insufficient data for an image" when opening a PDF, even with Adobe Reader 11.0.06

I have extracted some pages from a large, scanned, PDF into a separate document, using a product called Nuance PDF Converter 7, and when we try to open that with Adobe Reader 11.0.06, we receive the error "Insufficient data for an image". I have read that this error was supposed to be fixed with the latest version of Adobe Reader 11, but I have installed that, and it doesn't help.

I am also having this problem, especially with scanned documents. Since I need to download scanned documents in my work this is a big problem!Sometimes I can read but not save the document, sometimes one or two of the pages will be blank from the start. I have the latest version of Adobe Reader XI (11.0.10). I tried reducing the page zoom, a suggested workaround on this page: Acrobat: “Insufficient data for an image” error after updating to 10.1.4 or 9.5.2, but that did not help at all. FWIW I use a Windows 8.1 PC with 4 GB RAM. I usually download PDFs from the internet using Firefox.

Difference in ACR processed image when opened in PS CS4

Similar Messages

Maybe you are looking for