Difference in ASA module, ASA 5510
Folks,
I am trying to get some comparison good data on the Cisco ASA(5585 probably) module and the Cisco 5510 physical device.
We are looking to create contexts and most of these contexts are dynamic in nature.
What could be the advantages and disadvantages of using one and the other.
I know the ASA 5510 supports virtual contexts but not sure how much are supported by the base license and how much could be added.
Futher the communication between the Switch and the ASA module goes via the backplane and in case of physical device will go over the LAN cable(mostly a 1Gig). Will this be slower?
Regards,
Nikhil.
Hi,
Check if the below datasheet helps..
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/product_data_sheet0900aecd802930c5.html
hth
MS
Similar Messages
-
IPS modules in Cisco ASA 5510 Active/Standby pair.
All, I am looking to add the IPS module to my ASA 5510's. I am contemplating only purchasing one module and placing it in the active ASA. I am willing to accept that in a failure scenario I will loose the IPS functionality until the primary ASA is recovered. I have not had a chance to talk to my SE to see if this is even possible. Has anyone attempted a deployment such as this? Will it work and is it supported?
Sent from Cisco Technical Support iPad AppOk, that is what I needed to know. The purpose of us having an active/standby ASA is to keep the business up and going for the very rare times there could be an active ASA failure. The purpose for the IPS would be to help protect and inspect traffic and is not necessary to keep the business running. If we implement IPS I am not worried at all if during the times when the primary ASA is down (hasn't been down for over three years now) we lose the IPS funcationality. This is not worth the $1000 extra per year to us.
Thanks for the responses though. That answers my questions. -
ASA 5510 anti spam module issue need help
hi all,
i have ASA5510 my E0 interface is having public ip and E1 is having 192.168.1.0/24 network and my DMZ E2 is 172.16.2.0/24 network.
my management interface ip address is 10.10.10.1 and ive put 10.10.10.5 for SSM module. but im not receiving the updates from net bcoz there is no connection to the internet from 10.10.10.0/24 network.
how can i do that, and ASA 5510 has got 4 ports E0,E1,E2,E3 but i can see that port E3 is activated if i chk the sh run there is no port E3.
now my issue is i would like to allow 10.10.10.0/24 to access internet to update the module.
pls help, i will rate all the posts.
Regards
Binoy.Try these links:
http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a0080636f70.html#wp1051819
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807335ca.shtml -
ASA 5510 with Cisco 2811 Router Behind it - Not forwarding traffic
Hi all,
Some might know that I have been dealing with an issue where I cannot seem to get forwarded packets to reach their destinations behind an ASA 5510 that has a Cisco 2811 connected directly behind it.
Some examples that work.
I can SSH into the ASA.
I can SSH to the Cisco Routers behind the ASA.
I cannot reach items beind the Cisco Routers.
My Configuration is this (I am sure I included a bunch of info I didn't need to, but I am hoping it'll help!):
I have a static Ip assigned to my Ouside Interface Ethernet 0/1
It has an IP address of 199.195.xxx.xxx
I am trying to learn how to shape network traffic (this is all new to me) via the ASA and the Routers to specific devices.
The Inside Interface on the ASA is 10.10.1.1 255.255.255.252
The Outside Interface on the 2811 is 10.10.1.2 255.255.255.252
I can ping the router from the ASA. I can SSH through the ASA to the router.
BUT I CANNOT ACCESS DEVICES BEHIND THE ROUTER.
So, I wanted to BAM that statement above because I just don't kjnow where the issue is. Is the issue on the router or the ASA, my guess is, the router, but I just don't know.
Here are my configs, helpfully someone can help.
ASA errors on the ASDM when I try and hit resources; specifically a web device behind the ASA and the 2811. It's Ip address 192.168.1.5 it's listening on port 80.Static IP, not assigned via DHCP.
6
Feb 14 2014
19:38:56
98.22.121.x
41164
192.168.1.5
80
Built inbound TCP connection 1922859 for Outside:98.22.121.x/41164 (98.22.121.x/41164) to Inside:192.168.1.5/80 (199.195.168.x/8080)
6
Feb 14 2014
19:38:56
10.10.1.2
80
98.22.121.x
41164
Deny TCP (no connection) from 10.10.1.2/80 to 98.22.121.x/41164 flags SYN ACK on interface Inside
ASA5510# sh nat
Auto NAT Policies (Section 2)
1 (DMZ) to (Outside) source static ROUTER-2821 interface service tcp ssh 2222
translate_hits = 1, untranslate_hits = 18
2 (Inside) to (Outside) source static ROUTER-2811 interface service tcp ssh 222
translate_hits = 0, untranslate_hits = 13
3 (VOIP) to (Outside) source static ROUTER-3745 interface service tcp ssh 2223
translate_hits = 0, untranslate_hits = 3
4 (Inside) to (Outside) source static RDP-DC1 interface service tcp 3389 3389
translate_hits = 0, untranslate_hits = 236
5 (Inside) to (Outside) source static WEBCAM-01 interface service tcp www 8080
translate_hits = 0, untranslate_hits = 162
Manual NAT Policies (Section 3)
1 (any) to (Outside) source dynamic PAT-SOURCE interface
translate_hits = 1056862, untranslate_hits = 83506
ASA5510# show access-list
access-list cached ACL log flows: total 0, denied 0 (deny-flow-max 4096)
alert-interval 300
access-list USERS; 1 elements; name hash: 0x50681c1e
access-list USERS line 1 standard permit 10.10.1.0 255.255.255.0 (hitcnt=0) 0xdd6ba495
access-list Outside_access_in; 5 elements; name hash: 0xe796c137
access-list Outside_access_in line 1 extended permit tcp host 98.22.121.x object ROUTER-2811 eq ssh (hitcnt=37) 0x5a53778d
access-list Outside_access_in line 1 extended permit tcp host 98.22.121.x host 10.10.1.2 eq ssh (hitcnt=37) 0x5a53778d
access-list Outside_access_in line 2 extended permit tcp host 98.22.121.x object ROUTER-2821 eq ssh (hitcnt=8) 0x9f32bc21
access-list Outside_access_in line 2 extended permit tcp host 98.22.121.x host 10.10.0.2 eq ssh (hitcnt=8) 0x9f32bc21
access-list Outside_access_in line 3 extended permit tcp host 98.22.121.x interface Outside eq https (hitcnt=0) 0x385488b2
access-list Outside_access_in line 4 extended permit tcp host 98.22.121.x object WEBCAM-01 eq www (hitcnt=60) 0xe66674ec
access-list Outside_access_in line 4 extended permit tcp host 98.22.121.x host 192.168.1.5 eq www (hitcnt=60) 0xe66674ec
access-list Outside_access_in line 5 extended permit tcp host 98.22.121.x object RDP-DC1 eq 3389 (hitcnt=3) 0x02f13f4e
access-list Outside_access_in line 5 extended permit tcp host 98.22.121.x host 192.168.1.2 eq 3389 (hitcnt=3) 0x02f13f4e
access-list dmz-access-vlan1; 1 elements; name hash: 0xc3450860
access-list dmz-access-vlan1 line 1 extended permit ip 128.162.1.0 255.255.255.0 any (hitcnt=0) 0x429fedf1
access-list dmz-access; 3 elements; name hash: 0xf53f5801
access-list dmz-access line 1 remark Permit all traffic to DC1
access-list dmz-access line 2 extended permit ip 128.162.1.0 255.255.255.0 host 192.168.1.2 (hitcnt=0) 0xd2dced0a
access-list dmz-access line 3 remark Permit only DNS traffic to DNS server
access-list dmz-access line 4 extended permit udp 128.162.1.0 255.255.255.0 host 192.168.1.2 eq domain (hitcnt=0) 0xbb21093e
access-list dmz-access line 5 remark Permit ICMP to all devices in DC
access-list dmz-access line 6 extended permit icmp 128.162.1.0 255.255.255.0 192.168.1.0 255.255.255.0 (hitcnt=0) 0x71269ef7
CISCO-2811#show access-lists
Standard IP access list 1
10 permit any (1581021 matches)
CISCO-2811#show translate
CISCO-2811#show route
CISCO-2811#show route-map
CISCO-2811#show host
CISCO-2811#show hosts
Default domain is maladomini.int
Name/address lookup uses domain service
Name servers are 192.168.1.2, 199.195.168.4, 205.171.2.65, 205.171.3.65, 8.8.8.8
Codes: UN - unknown, EX - expired, OK - OK, ?? - revalidate
temp - temporary, perm - permanent
NA - Not Applicable None - Not defined
Host Port Flags Age Type Address(es)
api.mixpanel.com None (temp, OK) 2 IP 198.23.64.21
198.23.64.22
198.23.64.18
198.23.64.19
198.23.64.20
ASA5510:
ASA5510# sh run all
: Saved
ASA Version 9.1(4)
command-alias exec h help
command-alias exec lo logout
command-alias exec p ping
command-alias exec s show
terminal width 80
hostname ASA5510
domain-name maladomini.int
enable password x encrypted
no fips enable
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
xlate per-session permit tcp any4 any4
xlate per-session permit tcp any4 any6
xlate per-session permit tcp any6 any4
xlate per-session permit tcp any6 any6
xlate per-session permit udp any4 any4 eq domain
xlate per-session permit udp any4 any6 eq domain
xlate per-session permit udp any6 any4 eq domain
xlate per-session permit udp any6 any6 eq domain
passwd x encrypted
names
dns-guard
lacp system-priority 32768
interface Ethernet0/0
description LAN Interface
speed auto
duplex auto
no flowcontrol send on
nameif Inside
security-level 100
ip address 10.10.1.1 255.255.255.252
delay 10
interface Ethernet0/1
description WAN Interface
speed auto
duplex auto
no flowcontrol send on
nameif Outside
security-level 0
ip address 199.195.168.xxx 255.255.255.240
delay 10
interface Ethernet0/2
description DMZ
speed auto
duplex auto
no flowcontrol send on
nameif DMZ
security-level 100
ip address 10.10.0.1 255.255.255.252
delay 10
interface Ethernet0/3
description VOIP
speed auto
duplex auto
no flowcontrol send on
nameif VOIP
security-level 100
ip address 10.10.2.1 255.255.255.252
delay 10
interface Management0/0
speed auto
duplex auto
management-only
shutdown
nameif management
security-level 0
no ip address
delay 10
regex _default_gator "Gator"
regex _default_firethru-tunnel_2 "[/\\]cgi[-]bin[/\\]proxy"
regex _default_shoutcast-tunneling-protocol "1"
regex _default_http-tunnel "[/\\]HT_PortLog.aspx"
regex _default_x-kazaa-network "[\r\n\t ]+[xX]-[kK][aA][zZ][aA][aA]-[nN][eE][tT][wW][oO][rR][kK]"
regex _default_msn-messenger "[Aa][Pp][Pp][Ll][Ii][Cc][Aa][Tt][Ii][Oo][Nn][/\\][Xx][-][Mm][Ss][Nn][-][Mm][Ee][Ss][Ss][Ee][Nn][Gg][Ee][Rr]"
regex _default_GoToMyPC-tunnel_2 "[/\\]erc[/\\]Poll"
regex _default_gnu-http-tunnel_uri "[/\\]index[.]html"
regex _default_aim-messenger "[Hh][Tt][Tt][Pp][.][Pp][Rr][Oo][Xx][Yy][.][Ii][Cc][Qq][.][Cc][Oo][Mm]"
regex _default_gnu-http-tunnel_arg "crap"
regex _default_icy-metadata "[\r\n\t ]+[iI][cC][yY]-[mM][eE][tT][aA][dD][aA][tT][aA]"
regex _default_GoToMyPC-tunnel "machinekey"
regex _default_windows-media-player-tunnel "NSPlayer"
regex _default_yahoo-messenger "YMSG"
regex _default_httport-tunnel "photo[.]exectech[-]va[.]com"
regex _default_firethru-tunnel_1 "firethru[.]com"
checkheaps check-interval 60
checkheaps validate-checksum 60
boot system disk0:/asa914-k8.bin
ftp mode passive
clock timezone UTC 0
dns domain-lookup Outside
dns server-group DefaultDNS
name-server 199.195.168.4
name-server 205.171.2.65
name-server 205.171.3.65
domain-name maladomini.int
same-security-traffic permit inter-interface
object service ah pre-defined
service ah
description This is a pre-defined object
object service eigrp pre-defined
service eigrp
description This is a pre-defined object
object service esp pre-defined
service esp
description This is a pre-defined object
object service gre pre-defined
service gre
description This is a pre-defined object
object service icmp pre-defined
service icmp
description This is a pre-defined object
object service icmp6 pre-defined
service icmp6
description This is a pre-defined object
object service igmp pre-defined
service igmp
description This is a pre-defined object
object service igrp pre-defined
service igrp
description This is a pre-defined object
object service ip pre-defined
service ip
description This is a pre-defined object
object service ipinip pre-defined
service ipinip
description This is a pre-defined object
object service ipsec pre-defined
service esp
description This is a pre-defined object
object service nos pre-defined
service nos
description This is a pre-defined object
object service ospf pre-defined
service ospf
description This is a pre-defined object
object service pcp pre-defined
service pcp
description This is a pre-defined object
object service pim pre-defined
service pim
description This is a pre-defined object
object service pptp pre-defined
service gre
description This is a pre-defined object
object service snp pre-defined
service snp
description This is a pre-defined object
object service tcp pre-defined
service tcp
description This is a pre-defined object
object service udp pre-defined
service udp
description This is a pre-defined object
object service tcp-aol pre-defined
service tcp destination eq aol
description This is a pre-defined object
object service tcp-bgp pre-defined
service tcp destination eq bgp
description This is a pre-defined object
object service tcp-chargen pre-defined
service tcp destination eq chargen
description This is a pre-defined object
object service tcp-cifs pre-defined
service tcp destination eq cifs
description This is a pre-defined object
object service tcp-citrix-ica pre-defined
service tcp destination eq citrix-ica
description This is a pre-defined object
object service tcp-ctiqbe pre-defined
service tcp destination eq ctiqbe
description This is a pre-defined object
object service tcp-daytime pre-defined
service tcp destination eq daytime
description This is a pre-defined object
object service tcp-discard pre-defined
service tcp destination eq discard
description This is a pre-defined object
object service tcp-domain pre-defined
service tcp destination eq domain
description This is a pre-defined object
object service tcp-echo pre-defined
service tcp destination eq echo
description This is a pre-defined object
object service tcp-exec pre-defined
service tcp destination eq exec
description This is a pre-defined object
object service tcp-finger pre-defined
service tcp destination eq finger
description This is a pre-defined object
object service tcp-ftp pre-defined
service tcp destination eq ftp
description This is a pre-defined object
object service tcp-ftp-data pre-defined
service tcp destination eq ftp-data
description This is a pre-defined object
object service tcp-gopher pre-defined
service tcp destination eq gopher
description This is a pre-defined object
object service tcp-ident pre-defined
service tcp destination eq ident
description This is a pre-defined object
object service tcp-imap4 pre-defined
service tcp destination eq imap4
description This is a pre-defined object
object service tcp-irc pre-defined
service tcp destination eq irc
description This is a pre-defined object
object service tcp-hostname pre-defined
service tcp destination eq hostname
description This is a pre-defined object
object service tcp-kerberos pre-defined
service tcp destination eq kerberos
description This is a pre-defined object
object service tcp-klogin pre-defined
service tcp destination eq klogin
description This is a pre-defined object
object service tcp-kshell pre-defined
service tcp destination eq kshell
description This is a pre-defined object
object service tcp-ldap pre-defined
service tcp destination eq ldap
description This is a pre-defined object
object service tcp-ldaps pre-defined
service tcp destination eq ldaps
description This is a pre-defined object
object service tcp-login pre-defined
service tcp destination eq login
description This is a pre-defined object
object service tcp-lotusnotes pre-defined
service tcp destination eq lotusnotes
description This is a pre-defined object
object service tcp-nfs pre-defined
service tcp destination eq nfs
description This is a pre-defined object
object service tcp-netbios-ssn pre-defined
service tcp destination eq netbios-ssn
description This is a pre-defined object
object service tcp-whois pre-defined
service tcp destination eq whois
description This is a pre-defined object
object service tcp-nntp pre-defined
service tcp destination eq nntp
description This is a pre-defined object
object service tcp-pcanywhere-data pre-defined
service tcp destination eq pcanywhere-data
description This is a pre-defined object
object service tcp-pim-auto-rp pre-defined
service tcp destination eq pim-auto-rp
description This is a pre-defined object
object service tcp-pop2 pre-defined
service tcp destination eq pop2
description This is a pre-defined object
object service tcp-pop3 pre-defined
service tcp destination eq pop3
description This is a pre-defined object
object service tcp-pptp pre-defined
service tcp destination eq pptp
description This is a pre-defined object
object service tcp-lpd pre-defined
service tcp destination eq lpd
description This is a pre-defined object
object service tcp-rsh pre-defined
service tcp destination eq rsh
description This is a pre-defined object
object service tcp-rtsp pre-defined
service tcp destination eq rtsp
description This is a pre-defined object
object service tcp-sip pre-defined
service tcp destination eq sip
description This is a pre-defined object
object service tcp-smtp pre-defined
service tcp destination eq smtp
description This is a pre-defined object
object service tcp-ssh pre-defined
service tcp destination eq ssh
description This is a pre-defined object
object service tcp-sunrpc pre-defined
service tcp destination eq sunrpc
description This is a pre-defined object
object service tcp-tacacs pre-defined
service tcp destination eq tacacs
description This is a pre-defined object
object service tcp-talk pre-defined
service tcp destination eq talk
description This is a pre-defined object
object service tcp-telnet pre-defined
service tcp destination eq telnet
description This is a pre-defined object
object service tcp-uucp pre-defined
service tcp destination eq uucp
description This is a pre-defined object
object service tcp-www pre-defined
service tcp destination eq www
description This is a pre-defined object
object service tcp-http pre-defined
service tcp destination eq www
description This is a pre-defined object
object service tcp-https pre-defined
service tcp destination eq https
description This is a pre-defined object
object service tcp-cmd pre-defined
service tcp destination eq rsh
description This is a pre-defined object
object service tcp-sqlnet pre-defined
service tcp destination eq sqlnet
description This is a pre-defined object
object service tcp-h323 pre-defined
service tcp destination eq h323
description This is a pre-defined object
object service tcp-udp-cifs pre-defined
service tcp-udp destination eq cifs
description This is a pre-defined object
object service tcp-udp-discard pre-defined
service tcp-udp destination eq discard
description This is a pre-defined object
object service tcp-udp-domain pre-defined
service tcp-udp destination eq domain
description This is a pre-defined object
object service tcp-udp-echo pre-defined
service tcp-udp destination eq echo
description This is a pre-defined object
object service tcp-udp-kerberos pre-defined
service tcp-udp destination eq kerberos
description This is a pre-defined object
object service tcp-udp-nfs pre-defined
service tcp-udp destination eq nfs
description This is a pre-defined object
object service tcp-udp-pim-auto-rp pre-defined
service tcp-udp destination eq pim-auto-rp
description This is a pre-defined object
object service tcp-udp-sip pre-defined
service tcp-udp destination eq sip
description This is a pre-defined object
object service tcp-udp-sunrpc pre-defined
service tcp-udp destination eq sunrpc
description This is a pre-defined object
object service tcp-udp-tacacs pre-defined
service tcp-udp destination eq tacacs
description This is a pre-defined object
object service tcp-udp-www pre-defined
service tcp-udp destination eq www
description This is a pre-defined object
object service tcp-udp-http pre-defined
service tcp-udp destination eq www
description This is a pre-defined object
object service tcp-udp-talk pre-defined
service tcp-udp destination eq talk
description This is a pre-defined object
object service udp-biff pre-defined
service udp destination eq biff
description This is a pre-defined object
object service udp-bootpc pre-defined
service udp destination eq bootpc
description This is a pre-defined object
object service udp-bootps pre-defined
service udp destination eq bootps
description This is a pre-defined object
object service udp-cifs pre-defined
service udp destination eq cifs
description This is a pre-defined object
object service udp-discard pre-defined
service udp destination eq discard
description This is a pre-defined object
object service udp-domain pre-defined
service udp destination eq domain
description This is a pre-defined object
object service udp-dnsix pre-defined
service udp destination eq dnsix
description This is a pre-defined object
object service udp-echo pre-defined
service udp destination eq echo
description This is a pre-defined object
object service udp-www pre-defined
service udp destination eq www
description This is a pre-defined object
object service udp-http pre-defined
service udp destination eq www
description This is a pre-defined object
object service udp-nameserver pre-defined
service udp destination eq nameserver
description This is a pre-defined object
object service udp-kerberos pre-defined
service udp destination eq kerberos
description This is a pre-defined object
object service udp-mobile-ip pre-defined
service udp destination eq mobile-ip
description This is a pre-defined object
object service udp-nfs pre-defined
service udp destination eq nfs
description This is a pre-defined object
object service udp-netbios-ns pre-defined
service udp destination eq netbios-ns
description This is a pre-defined object
object service udp-netbios-dgm pre-defined
service udp destination eq netbios-dgm
description This is a pre-defined object
object service udp-ntp pre-defined
service udp destination eq ntp
description This is a pre-defined object
object service udp-pcanywhere-status pre-defined
service udp destination eq pcanywhere-status
description This is a pre-defined object
object service udp-pim-auto-rp pre-defined
service udp destination eq pim-auto-rp
description This is a pre-defined object
object service udp-radius pre-defined
service udp destination eq radius
description This is a pre-defined object
object service udp-radius-acct pre-defined
service udp destination eq radius-acct
description This is a pre-defined object
object service udp-rip pre-defined
service udp destination eq rip
description This is a pre-defined object
object service udp-secureid-udp pre-defined
service udp destination eq secureid-udp
description This is a pre-defined object
object service udp-sip pre-defined
service udp destination eq sip
description This is a pre-defined object
object service udp-snmp pre-defined
service udp destination eq snmp
description This is a pre-defined object
object service udp-snmptrap pre-defined
service udp destination eq snmptrap
description This is a pre-defined object
object service udp-sunrpc pre-defined
service udp destination eq sunrpc
description This is a pre-defined object
object service udp-syslog pre-defined
service udp destination eq syslog
description This is a pre-defined object
object service udp-tacacs pre-defined
service udp destination eq tacacs
description This is a pre-defined object
object service udp-talk pre-defined
service udp destination eq talk
description This is a pre-defined object
object service udp-tftp pre-defined
service udp destination eq tftp
description This is a pre-defined object
object service udp-time pre-defined
service udp destination eq time
description This is a pre-defined object
object service udp-who pre-defined
service udp destination eq who
description This is a pre-defined object
object service udp-xdmcp pre-defined
service udp destination eq xdmcp
description This is a pre-defined object
object service udp-isakmp pre-defined
service udp destination eq isakmp
description This is a pre-defined object
object service icmp6-unreachable pre-defined
service icmp6 unreachable
description This is a pre-defined object
object service icmp6-packet-too-big pre-defined
service icmp6 packet-too-big
description This is a pre-defined object
object service icmp6-time-exceeded pre-defined
service icmp6 time-exceeded
description This is a pre-defined object
object service icmp6-parameter-problem pre-defined
service icmp6 parameter-problem
description This is a pre-defined object
object service icmp6-echo pre-defined
service icmp6 echo
description This is a pre-defined object
object service icmp6-echo-reply pre-defined
service icmp6 echo-reply
description This is a pre-defined object
object service icmp6-membership-query pre-defined
service icmp6 membership-query
description This is a pre-defined object
object service icmp6-membership-report pre-defined
service icmp6 membership-report
description This is a pre-defined object
object service icmp6-membership-reduction pre-defined
service icmp6 membership-reduction
description This is a pre-defined object
object service icmp6-router-renumbering pre-defined
service icmp6 router-renumbering
description This is a pre-defined object
object service icmp6-router-solicitation pre-defined
service icmp6 router-solicitation
description This is a pre-defined object
object service icmp6-router-advertisement pre-defined
service icmp6 router-advertisement
description This is a pre-defined object
object service icmp6-neighbor-solicitation pre-defined
service icmp6 neighbor-solicitation
description This is a pre-defined object
object service icmp6-neighbor-advertisement pre-defined
service icmp6 neighbor-advertisement
description This is a pre-defined object
object service icmp6-neighbor-redirect pre-defined
service icmp6 neighbor-redirect
description This is a pre-defined object
object service icmp-echo pre-defined
service icmp echo
description This is a pre-defined object
object service icmp-echo-reply pre-defined
service icmp echo-reply
description This is a pre-defined object
object service icmp-unreachable pre-defined
service icmp unreachable
description This is a pre-defined object
object service icmp-source-quench pre-defined
service icmp source-quench
description This is a pre-defined object
object service icmp-redirect pre-defined
service icmp redirect
description This is a pre-defined object
object service icmp-alternate-address pre-defined
service icmp alternate-address
description This is a pre-defined object
object service icmp-router-advertisement pre-defined
service icmp router-advertisement
description This is a pre-defined object
object service icmp-router-solicitation pre-defined
service icmp router-solicitation
description This is a pre-defined object
object service icmp-time-exceeded pre-defined
service icmp time-exceeded
description This is a pre-defined object
object service icmp-parameter-problem pre-defined
service icmp parameter-problem
description This is a pre-defined object
object service icmp-timestamp-request pre-defined
service icmp timestamp-request
description This is a pre-defined object
object service icmp-timestamp-reply pre-defined
service icmp timestamp-reply
description This is a pre-defined object
object service icmp-information-request pre-defined
service icmp information-request
description This is a pre-defined object
object service icmp-information-reply pre-defined
service icmp information-reply
description This is a pre-defined object
object service icmp-mask-request pre-defined
service icmp mask-request
description This is a pre-defined object
object service icmp-mask-reply pre-defined
service icmp mask-reply
description This is a pre-defined object
object service icmp-traceroute pre-defined
service icmp traceroute
description This is a pre-defined object
object service icmp-conversion-error pre-defined
service icmp conversion-error
description This is a pre-defined object
object service icmp-mobile-redirect pre-defined
service icmp mobile-redirect
description This is a pre-defined object
object network ROUTER-2811
host 10.10.1.2
object network ROUTER-2821
host 10.10.0.2
object network WEBCAM-01
host 192.168.1.5
object network DNS-SERVER
host 192.168.1.2
object network ROUTER-3745
host 10.10.2.2
object network RDP-DC1
host 192.168.1.2
object-group network PAT-SOURCE
network-object 10.10.1.0 255.255.255.252
network-object 10.10.0.0 255.255.255.252
network-object 10.10.2.0 255.255.255.252
network-object 192.168.0.0 255.255.255.0
network-object 172.16.10.0 255.255.255.0
network-object 172.16.20.0 255.255.255.0
network-object 128.162.1.0 255.255.255.0
network-object 128.162.10.0 255.255.255.0
network-object 128.162.20.0 255.255.255.0
object-group network DM_INLINE_NETWORK_2
network-object host 98.22.121.x
object-group network Outside_access_in
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object gre
access-list USERS standard permit 10.10.1.0 255.255.255.0
access-list Outside_access_in extended permit tcp host 98.22.121.x object ROUTER-2811 eq ssh
access-list Outside_access_in extended permit tcp host 98.22.121.x object ROUTER-2821 eq ssh
access-list Outside_access_in extended permit tcp host 98.22.121.x interface Outside eq https
access-list Outside_access_in extended permit tcp host 98.22.121.x object WEBCAM-01 eq www
access-list Outside_access_in extended permit tcp host 98.22.121.x object RDP-DC1 eq 3389
access-list dmz-access-vlan1 extended permit ip 128.162.1.0 255.255.255.0 any
access-list dmz-access remark Permit all traffic to DC1
access-list dmz-access extended permit ip 128.162.1.0 255.255.255.0 host 192.168.1.2
access-list dmz-access remark Permit only DNS traffic to DNS server
access-list dmz-access extended permit udp 128.162.1.0 255.255.255.0 host 192.168.1.2 eq domain
access-list dmz-access remark Permit ICMP to all devices in DC
access-list dmz-access extended permit icmp 128.162.1.0 255.255.255.0 192.168.1.0 255.255.255.0
pager lines 24
logging enable
logging buffer-size 4096
logging asdm-buffer-size 100
logging asdm informational
logging flash-minimum-free 3076
logging flash-maximum-allocation 1024
logging rate-limit 1 10 message 747001
logging rate-limit 1 1 message 402116
logging rate-limit 1 10 message 620002
logging rate-limit 1 10 message 717015
logging rate-limit 1 10 message 717018
logging rate-limit 1 10 message 201013
logging rate-limit 1 10 message 201012
logging rate-limit 1 1 message 313009
logging rate-limit 100 1 message 750003
logging rate-limit 100 1 message 750002
logging rate-limit 100 1 message 750004
logging rate-limit 1 10 message 419003
logging rate-limit 1 10 message 405002
logging rate-limit 1 10 message 405003
logging rate-limit 1 10 message 421007
logging rate-limit 1 10 message 405001
logging rate-limit 1 10 message 421001
logging rate-limit 1 10 message 421002
logging rate-limit 1 10 message 337004
logging rate-limit 1 10 message 337005
logging rate-limit 1 10 message 337001
logging rate-limit 1 10 message 337002
logging rate-limit 1 60 message 199020
logging rate-limit 1 10 message 337003
logging rate-limit 2 5 message 199011
logging rate-limit 1 10 message 199010
logging rate-limit 1 10 message 337009
logging rate-limit 2 5 message 199012
logging rate-limit 1 10 message 710002
logging rate-limit 1 10 message 209003
logging rate-limit 1 10 message 209004
logging rate-limit 1 10 message 209005
logging rate-limit 1 10 message 431002
logging rate-limit 1 10 message 431001
logging rate-limit 1 1 message 447001
logging rate-limit 1 10 message 110003
logging rate-limit 1 10 message 110002
logging rate-limit 1 10 message 429007
logging rate-limit 1 10 message 216004
logging rate-limit 1 10 message 450001
flow-export template timeout-rate 30
flow-export active refresh-interval 1
mtu Inside 1500
mtu Outside 1500
mtu management 1500
mtu DMZ 1500
mtu VOIP 1500
icmp unreachable rate-limit 1 burst-size 1
icmp deny any Outside
asdm image disk0:/asdm-715.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network ROUTER-2811
nat (Inside,Outside) static interface service tcp ssh 222
object network ROUTER-2821
nat (DMZ,Outside) static interface service tcp ssh 2222
object network WEBCAM-01
nat (Inside,Outside) static interface service tcp www 8080
object network ROUTER-3745
nat (VOIP,Outside) static interface service tcp ssh 2223
object network RDP-DC1
nat (Inside,Outside) static interface service tcp 3389 3389
nat (any,Outside) after-auto source dynamic PAT-SOURCE interface
access-group Outside_access_in in interface Outside
ipv6 dhcprelay timeout 60
router rip
network 10.0.0.0
version 2
no auto-summary
route Outside 0.0.0.0 0.0.0.0 199.195.168.113 1
route Inside 128.162.1.0 255.255.255.0 10.10.0.2 1
route Inside 128.162.10.0 255.255.255.0 10.10.0.2 1
route Inside 128.162.20.0 255.255.255.0 10.10.0.2 1
route Inside 172.16.10.0 255.255.255.0 10.10.1.2 1
route Inside 172.16.20.0 255.255.255.0 10.10.1.2 1
route Inside 192.168.1.0 255.255.255.0 10.10.1.2 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
action continue
no cts server-group
no cts sxp enable
no cts sxp default
no cts sxp default source-ip
cts sxp reconciliation period 120
cts sxp retry period 120
user-identity enable
user-identity domain LOCAL
user-identity default-domain LOCAL
user-identity action mac-address-mismatch remove-user-ip
user-identity inactive-user-timer minutes 60
user-identity poll-import-user-group-timer hours 8
user-identity ad-agent active-user-database full-download
user-identity ad-agent hello-timer seconds 30 retry-times 5
no user-identity user-not-found enable
aaa authentication ssh console LOCAL
http server enable 443
http 0.0.0.0 0.0.0.0 Inside
http 98.22.121.x 255.255.255.255 Outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
no snmp-server enable traps syslog
no snmp-server enable traps ipsec start stop
no snmp-server enable traps entity config-change fru-insert fru-remove fan-failure power-supply power-supply-presence cpu-temperature chassis-temperature power-supply-temperature chassis-fan-failure
no snmp-server enable traps memory-threshold
no snmp-server enable traps interface-threshold
no snmp-server enable traps remote-access session-threshold-exceeded
no snmp-server enable traps connection-limit-reached
no snmp-server enable traps cpu threshold rising
no snmp-server enable traps ikev2 start stop
no snmp-server enable traps nat packet-discard
snmp-server enable
snmp-server listen-port 161
fragment size 200 Inside
fragment chain 24 Inside
fragment timeout 5 Inside
no fragment reassembly full Inside
fragment size 200 Outside
fragment chain 24 Outside
fragment timeout 5 Outside
no fragment reassembly full Outside
fragment size 200 management
fragment chain 24 management
fragment timeout 5 management
no fragment reassembly full management
fragment size 200 DMZ
fragment chain 24 DMZ
fragment timeout 5 DMZ
no fragment reassembly full DMZ
fragment size 200 VOIP
fragment chain 24 VOIP
fragment timeout 5 VOIP
no fragment reassembly full VOIP
no sysopt connection timewait
sysopt connection tcpmss 1380
sysopt connection tcpmss minimum 0
sysopt connection permit-vpn
sysopt connection reclassify-vpn
no sysopt connection preserve-vpn-flows
no sysopt radius ignore-secret
no sysopt noproxyarp Inside
no sysopt noproxyarp Outside
no sysopt noproxyarp management
no sysopt noproxyarp DMZ
no sysopt noproxyarp VOIP
service password-recovery
no crypto ipsec ikev2 sa-strength-enforcement
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto ipsec security-association replay window-size 64
crypto ipsec security-association pmtu-aging infinite
crypto ipsec fragmentation before-encryption Inside
crypto ipsec fragmentation before-encryption Outside
crypto ipsec fragmentation before-encryption management
crypto ipsec fragmentation before-encryption DMZ
crypto ipsec fragmentation before-encryption VOIP
crypto ipsec df-bit copy-df Inside
crypto ipsec df-bit copy-df Outside
crypto ipsec df-bit copy-df management
crypto ipsec df-bit copy-df DMZ
crypto ipsec df-bit copy-df VOIP
crypto ca trustpool policy
revocation-check none
crl cache-time 60
crl enforcenextupdate
crypto isakmp identity auto
crypto isakmp nat-traversal 20
crypto ikev2 cookie-challenge 50
crypto ikev2 limit max-in-negotiation-sa 100
no crypto ikev2 limit max-sa
crypto ikev2 redirect during-auth
crypto ikev1 limit max-in-negotiation-sa 20
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 Inside
ssh 98.22.121.x 255.255.255.255 Outside
ssh timeout 60
ssh version 2
ssh key-exchange group dh-group1-sha1
console timeout 0
vpn-addr-assign aaa
vpn-addr-assign dhcp
vpn-addr-assign local reuse-delay 0
ipv6-vpn-addr-assign aaa
ipv6-vpn-addr-assign local reuse-delay 0
no vpn-sessiondb max-other-vpn-limit
no vpn-sessiondb max-anyconnect-premium-or-essentials-limit
no remote-access threshold
l2tp tunnel hello 60
tls-proxy maximum-session 100
threat-detection rate dos-drop rate-interval 600 average-rate 100 burst-rate 400
threat-detection rate dos-drop rate-interval 3600 average-rate 80 burst-rate 320
threat-detection rate bad-packet-drop rate-interval 600 average-rate 100 burst-rate 400
threat-detection rate bad-packet-drop rate-interval 3600 average-rate 80 burst-rate 320
threat-detection rate acl-drop rate-interval 600 average-rate 400 burst-rate 800
threat-detection rate acl-drop rate-interval 3600 average-rate 320 burst-rate 640
threat-detection rate conn-limit-drop rate-interval 600 average-rate 100 burst-rate 400
threat-detection rate conn-limit-drop rate-interval 3600 average-rate 80 burst-rate 320
threat-detection rate icmp-drop rate-interval 600 average-rate 100 burst-rate 400
threat-detection rate icmp-drop rate-interval 3600 average-rate 80 burst-rate 320
threat-detection rate scanning-threat rate-interval 600 average-rate 5 burst-rate 10
threat-detection rate scanning-threat rate-interval 3600 average-rate 4 burst-rate 8
threat-detection rate syn-attack rate-interval 600 average-rate 100 burst-rate 200
threat-detection rate syn-attack rate-interval 3600 average-rate 80 burst-rate 160
threat-detection rate fw-drop rate-interval 600 average-rate 400 burst-rate 1600
threat-detection rate fw-drop rate-interval 3600 average-rate 320 burst-rate 1280
threat-detection rate inspect-drop rate-interval 600 average-rate 400 burst-rate 1600
threat-detection rate inspect-drop rate-interval 3600 average-rate 320 burst-rate 1280
threat-detection rate interface-drop rate-interval 600 average-rate 2000 burst-rate 8000
threat-detection rate interface-drop rate-interval 3600 average-rate 1600 burst-rate 6400
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 24.56.178.140 source Outside prefer
ssl server-version any
ssl client-version any
ssl encryption rc4-sha1 dhe-aes128-sha1 dhe-aes256-sha1 aes128-sha1 aes256-sha1 3des-sha1
ssl certificate-authentication fca-timeout 2
webvpn
memory-size percent 50
port 443
dtls port 443
character-encoding none
no http-proxy
no https-proxy
default-idle-timeout 1800
portal-access-rule none
no csd enable
no anyconnect enable
no tunnel-group-list enable
no tunnel-group-preference group-url
rewrite order 65535 enable resource-mask *
no internal-password
no onscreen-keyboard
no default-language
no smart-tunnel notification-icon
no keepout
cache
no disable
max-object-size 1000
min-object-size 0
no cache-static-content enable
lmfactor 20
expiry-time 1
no auto-signon
no error-recovery disable
no ssl-server-check
no mus password
mus host mus.cisco.com
no hostscan data-limit
: # show import webvpn customization
: Template
: DfltCustomization
: # show import webvpn url-list
: Template
: # show import webvpn translation-table
: Translation Tables' Templates:
: PortForwarder
: banners
: customization
: url-list
: webvpn
: Translation Tables:
: fr PortForwarder
: fr customization
: fr webvpn
: ja PortForwarder
: ja customization
: ja webvpn
: ru PortForwarder
: ru customization
: ru webvpn
: # show import webvpn mst-translation
: No MS translation tables defined
: # show import webvpn webcontent
: No custom webcontent is loaded
: # show import webvpn AnyConnect-customization
: No OEM resources defined
: # show import webvpn plug-in
group-policy DfltGrpPolicy internal
group-policy DfltGrpPolicy attributes
banner none
wins-server none
dns-server none
dhcp-network-scope none
vpn-access-hours none
vpn-simultaneous-logins 3
vpn-idle-timeout 30
vpn-idle-timeout alert-interval 1
vpn-session-timeout none
vpn-session-timeout alert-interval 1
vpn-filter none
ipv6-vpn-filter none
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-clientless
password-storage disable
ip-comp disable
re-xauth disable
group-lock none
pfs disable
ipsec-udp disable
ipsec-udp-port 10000
split-tunnel-policy tunnelall
ipv6-split-tunnel-policy tunnelall
split-tunnel-network-list none
default-domain none
split-dns none
split-tunnel-all-dns disable
intercept-dhcp 255.255.255.255 disable
secure-unit-authentication disable
user-authentication disable
user-authentication-idle-timeout 30
ip-phone-bypass disable
client-bypass-protocol disable
gateway-fqdn none
leap-bypass disable
nem disable
backup-servers keep-client-config
msie-proxy server none
msie-proxy method no-modify
msie-proxy except-list none
msie-proxy local-bypass disable
msie-proxy pac-url none
msie-proxy lockdown enable
vlan none
nac-settings none
address-pools none
ipv6-address-pools none
smartcard-removal-disconnect enable
scep-forwarding-url none
client-firewall none
client-access-rule none
webvpn
url-list none
filter none
homepage none
html-content-filter none
port-forward name Application Access
port-forward disable
http-proxy disable
sso-server none
anyconnect ssl dtls enable
anyconnect mtu 1406
anyconnect firewall-rule client-interface private none
anyconnect firewall-rule client-interface public none
anyconnect keep-installer installed
anyconnect ssl keepalive 20
anyconnect ssl rekey time none
anyconnect ssl rekey method none
anyconnect dpd-interval client 30
anyconnect dpd-interval gateway 30
anyconnect ssl compression none
anyconnect dtls compression none
anyconnect modules none
anyconnect profiles none
anyconnect ask none
customization none
keep-alive-ignore 4
http-comp gzip
download-max-size 2147483647
upload-max-size 2147483647
post-max-size 2147483647
user-storage none
storage-objects value cookies,credentials
storage-key none
hidden-shares none
smart-tunnel disable
activex-relay enable
unix-auth-uid 65534
unix-auth-gid 65534
file-entry enable
file-browsing enable
url-entry enable
deny-message value Login was successful, but because certain criteria have not been met or due to some specific group policy, you do not have permission to use any of the VPN features. Contact your IT administrator for more information
smart-tunnel auto-signon disable
anyconnect ssl df-bit-ignore disable
anyconnect routing-filtering-ignore disable
smart-tunnel tunnel-policy tunnelall
always-on-vpn profile-setting
password-policy minimum-length 3
password-policy minimum-changes 0
password-policy minimum-lowercase 0
password-policy minimum-uppercase 0
password-policy minimum-numeric 0
password-policy minimum-special 0
password-policy lifetime 0
no password-policy authenticate-enable
quota management-session 0
tunnel-group DefaultL2LGroup type ipsec-l2l
tunnel-group DefaultL2LGroup general-attributes
no accounting-server-group
default-group-policy DfltGrpPolicy
tunnel-group DefaultL2LGroup ipsec-attributes
no ikev1 pre-shared-key
peer-id-validate req
no chain
no ikev1 trust-point
isakmp keepalive threshold 10 retry 2
no ikev2 remote-authentication
no ikev2 local-authentication
tunnel-group DefaultRAGroup type remote-access
tunnel-group DefaultRAGroup general-attributes
no address-pool
no ipv6-address-pool
authentication-server-group LOCAL
secondary-authentication-server-group none
no accounting-server-group
default-group-policy DfltGrpPolicy
no dhcp-server
no strip-realm
no nat-assigned-to-public-ip
no scep-enrollment enable
no password-management
no override-account-disable
no strip-group
no authorization-required
username-from-certificate CN OU
secondary-username-from-certificate CN OU
authentication-attr-from-server primary
authenticated-session-username primary
tunnel-group DefaultRAGroup webvpn-attributes
customization DfltCustomization
authentication aaa
no override-svc-download
no radius-reject-message
no proxy-auth sdi
no pre-fill-username ssl-client
no pre-fill-username clientless
no secondary-pre-fill-username ssl-client
no secondary-pre-fill-username clientless
dns-group DefaultDNS
no without-csd
tunnel-group DefaultRAGroup ipsec-attributes
no ikev1 pre-shared-key
peer-id-validate req
no chain
no ikev1 trust-point
no ikev1 radius-sdi-xauth
isakmp keepalive threshold 300 retry 2
ikev1 user-authentication xauth
no ikev2 remote-authentication
no ikev2 local-authentication
tunnel-group DefaultRAGroup ppp-attributes
no authentication pap
authentication chap
authentication ms-chap-v1
no authentication ms-chap-v2
no authentication eap-proxy
tunnel-group DefaultWEBVPNGroup type remote-access
tunnel-group DefaultWEBVPNGroup general-attributes
no address-pool
no ipv6-address-pool
authentication-server-group LOCAL
secondary-authentication-server-group none
no accounting-server-group
default-group-policy DfltGrpPolicy
no dhcp-server
no strip-realm
no nat-assigned-to-public-ip
no scep-enrollment enable
no password-management
no override-account-disable
no strip-group
no authorization-required
username-from-certificate CN OU
secondary-username-from-certificate CN OU
authentication-attr-from-server primary
authenticated-session-username primary
tunnel-group DefaultWEBVPNGroup webvpn-attributes
customization DfltCustomization
authentication aaa
no override-svc-download
no radius-reject-message
no proxy-auth sdi
no pre-fill-username ssl-client
no pre-fill-username clientless
no secondary-pre-fill-username ssl-client
no secondary-pre-fill-username clientless
dns-group DefaultDNS
no without-csd
tunnel-group DefaultWEBVPNGroup ipsec-attributes
no ikev1 pre-shared-key
peer-id-validate req
no chain
no ikev1 trust-point
no ikev1 radius-sdi-xauth
isakmp keepalive threshold 300 retry 2
ikev1 user-authentication xauth
no ikev2 remote-authentication
no ikev2 local-authentication
tunnel-group DefaultWEBVPNGroup ppp-attributes
no authentication pap
authentication chap
authentication ms-chap-v1
no authentication ms-chap-v2
no authentication eap-proxy
class-map type inspect http match-all _default_gator
match request header user-agent regex _default_gator
class-map type inspect http match-all _default_msn-messenger
match response header content-type regex _default_msn-messenger
class-map type inspect http match-all _default_yahoo-messenger
match request body regex _default_yahoo-messenger
class-map type inspect http match-all _default_windows-media-player-tunnel
match request header user-agent regex _default_windows-media-player-tunnel
class-map type inspect http match-all _default_gnu-http-tunnel
match request args regex _default_gnu-http-tunnel_arg
match request uri regex _default_gnu-http-tunnel_uri
class-map type inspect http match-all _default_firethru-tunnel
match request header host regex _default_firethru-tunnel_1
match request uri regex _default_firethru-tunnel_2
class-map type inspect http match-all _default_aim-messenger
match request header host regex _default_aim-messenger
class-map type inspect http match-all _default_http-tunnel
match request uri regex _default_http-tunnel
class-map type inspect http match-all _default_kazaa
match response header regex _default_x-kazaa-network count gt 0
class-map type inspect http match-all _default_shoutcast-tunneling-protocol
match request header regex _default_icy-metadata regex _default_shoutcast-tunneling-protocol
class-map class-default
match any
class-map inspection_default
match default-inspection-traffic
class-map type inspect http match-all _default_GoToMyPC-tunnel
match request args regex _default_GoToMyPC-tunnel
match request uri regex _default_GoToMyPC-tunnel_2
class-map type inspect http match-all _default_httport-tunnel
match request header host regex _default_httport-tunnel
policy-map type inspect rtsp _default_rtsp_map
description Default RTSP policymap
parameters
policy-map type inspect ipv6 _default_ipv6_map
description Default IPV6 policy-map
parameters
verify-header type
verify-header order
match header routing-type range 0 255
drop log
policy-map type inspect h323 _default_h323_map
description Default H.323 policymap
parameters
no rtp-conformance
policy-map type inspect dns migrated_dns_map_1
parameters
message-length maximum client auto
message-length maximum 512
no message-length maximum server
dns-guard
protocol-enforcement
nat-rewrite
no id-randomization
no id-mismatch
no tsig enforced
policy-map type inspect esmtp _default_esmtp_map
description Default ESMTP policy-map
parameters
mask-banner
no mail-relay
no special-character
no allow-tls
match cmd line length gt 512
drop-connection log
match cmd RCPT count gt 100
drop-connection log
match body line length gt 998
log
match header line length gt 998
drop-connection log
match sender-address length gt 320
drop-connection log
match MIME filename length gt 255
drop-connection log
match ehlo-reply-parameter others
mask
policy-map type inspect ip-options _default_ip_options_map
description Default IP-OPTIONS policy-map
parameters
router-alert action allow
policy-map global_policy
class inspection_default
inspect dns migrated_dns_map_1
inspect ftp
inspect h323 h225 _default_h323_map
inspect h323 ras _default_h323_map
inspect rsh
inspect rtsp
inspect esmtp _default_esmtp_map
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options _default_ip_options_map
inspect icmp
inspect icmp error
inspect pptp
class class-default
policy-map type inspect sip _default_sip_map
description Default SIP policymap
parameters
im
no ip-address-privacy
traffic-non-sip
no rtp-conformance
policy-map type inspect dns _default_dns_map
description Default DNS policy-map
parameters
no message-length maximum client
no message-leI ran those commands while I had the nat off on the router and here are the results. note, i didn't make any changes to the ASA as you only said to remove the router RIP which I did and reloaded and no change.
As long as the statements ip nat outside on the Fastethernet 0/0 is off and the ip nat inside is off on the vlan and the overload statement is taken out, I cannot hit the internet.
CISCO-2811#conf t
Enter configuration commands, one per line. End with CNTL/Z.
CISCO-2811(config)#int
CISCO-2811(config)#interface f
CISCO-2811(config)#interface fastEthernet 0/1.3
CISCO-2811(config-subif)#no ip nat inside
CISCO-2811(config-subif)#exit
CISCO-2811(config)#inter
CISCO-2811(config)#interface f
CISCO-2811(config)#interface fastEthernet 0/0
CISCO-2811(config-if)#no ip nat outside
CISCO-2811(config-if)#exit
CISCO-2811(config)#$nside source list 1 interface FastEthernet0/0 overload
Dynamic mapping in use, do you want to delete all entries? [no]: y
CISCO-2811(config)#exit
CISCO-2811#sh ip arp
Protocol Address Age (min) Hardware Addr Type Interface
Internet 10.10.1.1 202 c47d.4f3b.8ea6 ARPA FastEthernet0/0
Internet 10.10.1.2 - 0019.55a7.2ae8 ARPA FastEthernet0/0
Internet 172.16.10.1 - 0019.55a7.2ae9 ARPA FastEthernet0/1.1
Internet 172.16.10.3 238 0011.5c73.28c1 ARPA FastEthernet0/1.1
Internet 172.16.10.50 72 cc2d.8c78.065a ARPA FastEthernet0/1.1
Internet 172.16.20.1 - 0019.55a7.2ae9 ARPA FastEthernet0/1.2
Internet 172.16.20.3 196 0011.5c73.28c2 ARPA FastEthernet0/1.2
Internet 192.168.1.1 - 0019.55a7.2ae9 ARPA FastEthernet0/1.3
Internet 192.168.1.2 0 0024.e864.01a8 ARPA FastEthernet0/1.3
Internet 192.168.1.3 155 0011.5c73.28c0 ARPA FastEthernet0/1.3
Internet 192.168.1.5 61 4802.2a4c.1c74 ARPA FastEthernet0/1.3
Internet 192.168.1.20 0 5cf9.dd52.5fa9 ARPA FastEthernet0/1.3
Internet 192.168.1.50 0 308c.fb47.f2d9 ARPA FastEthernet0/1.3
Internet 192.168.1.51 1 ec35.8677.4057 ARPA FastEthernet0/1.3
Internet 192.168.1.52 1 b418.d136.ef72 ARPA FastEthernet0/1.3
Internet 192.168.1.53 1 8853.9572.e113 ARPA FastEthernet0/1.3
Internet 192.168.1.54 12 0009.b044.9f23 ARPA FastEthernet0/1.3
Internet 192.168.1.55 0 f47b.5e9a.7ae5 ARPA FastEthernet0/1.3
Internet 192.168.1.149 0 001e.4fc5.a199 ARPA FastEthernet0/1.3
Internet 192.168.1.174 0 b8ac.6fff.af83 ARPA FastEthernet0/1.3
CISCO-2811#sh ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
+ - replicated route, % - next hop override
Gateway of last resort is 10.10.1.1 to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via 10.10.1.1
10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 10.10.1.0/30 is directly connected, FastEthernet0/0
L 10.10.1.2/32 is directly connected, FastEthernet0/0
172.16.0.0/16 is variably subnetted, 4 subnets, 2 masks
C 172.16.10.0/24 is directly connected, FastEthernet0/1.1
L 172.16.10.1/32 is directly connected, FastEthernet0/1.1
C 172.16.20.0/24 is directly connected, FastEthernet0/1.2
L 172.16.20.1/32 is directly connected, FastEthernet0/1.2
192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.1.0/24 is directly connected, FastEthernet0/1.3
L 192.168.1.1/32 is directly connected, FastEthernet0/1.3
ASA
ASA5510# sh arp
Inside 10.10.1.2 0019.55a7.2ae8 12342
Outside 199.195.168.113 000c.4243.581a 2
Outside 199.195.168.116 e05f.b947.116b 2436
Outside 199.195.168.120 0017.c58a.1123 9192
DMZ 10.10.0.2 0025.849f.63e0 3192
VOIP 10.10.2.2 000d.bcdc.fc40 7754
ASA5510# sh route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is 199.195.168.113 to network 0.0.0.0
S 172.16.20.0 255.255.255.0 [1/0] via 10.10.1.2, Inside
S 172.16.10.0 255.255.255.0 [1/0] via 10.10.1.2, Inside
S 128.162.1.0 255.255.255.0 [1/0] via 10.10.0.2, DMZ
S 128.162.10.0 255.255.255.0 [1/0] via 10.10.0.2, DMZ
S 128.162.20.0 255.255.255.0 [1/0] via 10.10.0.2, DMZ
C 199.195.168.112 255.255.255.240 is directly connected, Outside
C 10.10.0.0 255.255.255.252 is directly connected, DMZ
C 10.10.1.0 255.255.255.252 is directly connected, Inside
S 192.168.1.0 255.255.255.0 [1/0] via 10.10.1.2, Inside
S* 0.0.0.0 0.0.0.0 [1/0] via 199.195.168.113, Outside
ASA5510# show xlate
35 in use, 784 most used
Flags: D - DNS, e - extended, I - identity, i - dynamic, r - portmap,
s - static, T - twice, N - net-to-net
TCP PAT from DMZ:10.10.0.2 22-22 to Outside:199.195.168.x 2222-2222
flags sr idle 481:54:14 timeout 0:00:00
TCP PAT from Inside:10.10.1.2 22-22 to Outside:199.195.168.x 222-222
flags sr idle 51:06:46 timeout 0:00:00
TCP PAT from VOIP:10.10.2.2 22-22 to Outside:199.195.168.x 2223-2223
flags sr idle 687:32:27 timeout 0:00:00
TCP PAT from Inside:192.168.1.2 3389-3389 to Outside:199.195.168.x 3389-3389
flags sr idle 457:17:01 timeout 0:00:00
TCP PAT from Inside:192.168.1.5 80-80 to Outside:199.195.168.x 8080-8080
flags sr idle 52:18:58 timeout 0:00:00
NAT from Outside:0.0.0.0/0 to any:0.0.0.0/0
flags sIT idle 353:10:21 timeout 0:00:00
UDP PAT from any:10.10.1.2/52581 to Outside:199.195.168.x/52581 flags ri idle 0:00:00 timeout 0:00:30
UDP PAT from any:10.10.1.2/55389 to Outside:199.195.168.x/55389 flags ri idle 0:00:03 timeout 0:00:30
UDP PAT from any:10.10.1.2/51936 to Outside:199.195.168.x/51936 flags ri idle 0:00:04 timeout 0:00:30
UDP PAT from any:10.10.1.2/51345 to Outside:199.195.168.x/51345 flags ri idle 0:00:09 timeout 0:00:30
UDP PAT from any:10.10.1.2/55985 to Outside:199.195.168.x/55985 flags ri idle 0:00:18 timeout 0:00:30
UDP PAT from any:10.10.1.2/49368 to Outside:199.195.168.x/49368 flags ri idle 0:00:22 timeout 0:00:30
UDP PAT from any:10.10.1.2/52441 to Outside:199.195.168.x/52441 flags ri idle 0:00:23 timeout 0:00:30
TCP PAT from any:10.10.1.2/57908 to Outside:199.195.168.x/57908 flags ri idle 0:08:37 timeout 0:00:30
TCP PAT from any:10.10.1.2/57907 to Outside:199.195.168.x/57907 flags ri idle 0:08:37 timeout 0:00:30
TCP PAT from any:10.10.1.2/57906 to Outside:199.195.168.x/57906 flags ri idle 0:08:37 timeout 0:00:30
TCP PAT from any:10.10.1.2/57896 to Outside:199.195.168.x/57896 flags ri idle 0:09:09 timeout 0:00:30
TCP PAT from any:10.10.1.2/57879 to Outside:199.195.168.x/57879 flags ri idle 0:10:23 timeout 0:00:30
TCP PAT from any:10.10.1.2/49441 to Outside:199.195.168.x/49441 flags ri idle 0:20:52 timeout 0:00:30
TCP PAT from any:10.10.1.2/57868 to Outside:199.195.168.x/57868 flags ri idle 0:25:28 timeout 0:00:30
TCP PAT from any:10.10.1.2/60519 to Outside:199.195.168.x/60519 flags ri idle 0:44:11 timeout 0:00:30
TCP PAT from any:10.10.1.2/60491 to Outside:199.195.168.x/60491 flags ri idle 0:44:20 timeout 0:00:30
TCP PAT from any:10.10.1.2/60484 to Outside:199.195.168.x/60484 flags ri idle 0:44:35 timeout 0:00:30
TCP PAT from any:10.10.1.2/60480 to Outside:199.195.168.x/60480 flags ri idle 0:44:51 timeout 0:00:30
TCP PAT from any:10.10.1.2/53851 to Outside:199.195.168.x/53851 flags ri idle 0:54:14 timeout 0:00:30
TCP PAT from any:10.10.1.2/57812 to Outside:199.195.168.x/57812 flags ri idle 0:58:30 timeout 0:00:30
TCP PAT from any:10.10.1.2/57810 to Outside:199.195.168.x/57810 flags ri idle 0:58:32 timeout 0:00:30
TCP PAT from any:10.10.1.2/53847 to Outside:199.195.168.x/53847 flags ri idle 1:00:18 timeout 0:00:30
TCP PAT from any:10.10.1.2/57808 to Outside:199.195.168.x/57808 flags ri idle 1:07:58 timeout 0:00:30
TCP PAT from any:10.10.1.2/60406 to Outside:199.195.168.x/60406 flags ri idle 1:42:13 timeout 0:00:30
TCP PAT from any:10.10.1.2/49259 to Outside:199.195.168.x/49259 flags ri idle 7:39:44 timeout 0:00:30
TCP PAT from any:10.10.1.2/49191 to Outside:199.195.168.x/49191 flags ri idle 7:42:39 timeout 0:00:30
TCP PAT from any:10.10.1.2/55951 to Outside:199.195.168.x/55951 flags ri idle 23:11:40 timeout 0:00:30
TCP PAT from any:10.10.1.2/55944 to Outside:199.195.168.x/55944 flags ri idle 23:15:19 timeout 0:00:30
TCP PAT from any:10.10.1.2/55942 to Outside:199.195.168.x/55942 flags ri idle 23:15:24 timeout 0:00:30
ASA5510# sh conn all
149 in use, 815 most used
TCP Outside 74.125.193.108:993 Inside 10.10.1.2:57879, idle 0:12:37, bytes 6398, flags UIO
TCP Outside 174.35.24.74:80 Inside 192.168.1.20:53879, idle 0:00:01, bytes 0, flags saA
TCP Outside 174.35.24.74:80 Inside 192.168.1.20:53878, idle 0:00:01, bytes 0, flags saA
TCP Outside 17.149.36.177:5223 Inside 10.10.1.2:60480, idle 0:16:53, bytes 4539, flags UIO
TCP Outside 98.22.121.19:443 Inside 192.168.1.20:53877, idle 0:00:02, bytes 0, flags saA
TCP Outside 98.22.121.19:443 Inside 192.168.1.20:53876, idle 0:00:02, bytes 0, flags saA
TCP Outside 98.22.121.19:443 Inside 192.168.1.20:53875, idle 0:00:05, bytes 0, flags saA
TCP Outside 98.22.121.19:443 Inside 192.168.1.20:53874, idle 0:00:05, bytes 0, flags saA
TCP Outside 98.22.121.19:443 Inside 192.168.1.20:53872, idle 0:00:11, bytes 0, flags saA
TCP Outside 98.22.121.19:443 Inside 192.168.1.20:53871, idle 0:00:11, bytes 0, flags saA
TCP Outside 98.22.121.19:443 Inside 192.168.1.20:53868, idle 0:00:08, bytes 0, flags saA
TCP Outside 98.22.121.19:443 Inside 192.168.1.20:53867, idle 0:00:08, bytes 0, flags saA
TCP Outside 98.22.121.19:443 Inside 192.168.1.20:53860, idle 0:00:17, bytes 0, flags saA
TCP Outside 98.22.121.19:443 Inside 192.168.1.20:53859, idle 0:00:17, bytes 0, flags saA
TCP Outside 17.172.233.95:5223 Inside 10.10.1.2:49191, idle 0:18:48, bytes 7384, flags UIO
TCP Outside 17.178.100.43:443 Inside 10.10.1.2:57810, idle 0:56:21, bytes 5797, flags UFIO
TCP Outside 23.206.216.93:80 Inside 10.10.1.2:53847, idle 0:54:15, bytes 2683, flags UFIO
TCP Outside 143.127.93.90:80 Inside 10.10.1.2:49259, idle 0:12:20, bytes 13315, flags UIO
TCP Outside 74.125.225.53:443 Inside 192.168.1.20:53864, idle 0:00:11, bytes 0, flags saA
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:49204, idle 0:00:04, bytes 67, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.174:50122, idle 0:00:07, bytes 43, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:63275, idle 0:00:08, bytes 54, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:63306, idle 0:00:18, bytes 51, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:65059, idle 0:00:22, bytes 46, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:64681, idle 0:00:30, bytes 54, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:64661, idle 0:00:30, bytes 51, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.20:55618, idle 0:00:32, bytes 43, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:65056, idle 0:00:33, bytes 48, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.55:59433, idle 0:00:41, bytes 33, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.20:52178, idle 0:00:42, bytes 33, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.174:61414, idle 0:00:43, bytes 34, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:65438, idle 0:00:44, bytes 44, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:63686, idle 0:00:44, bytes 51, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:65416, idle 0:00:45, bytes 45, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.52:53047, idle 0:00:47, bytes 32, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.52:62213, idle 0:00:46, bytes 74, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.52:52347, idle 0:00:46, bytes 92, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.52:58069, idle 0:00:46, bytes 64, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.52:50753, idle 0:00:46, bytes 74, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:65381, idle 0:00:50, bytes 50, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:65082, idle 0:00:50, bytes 51, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:64038, idle 0:00:50, bytes 54, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:49309, idle 0:00:51, bytes 43, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:64034, idle 0:00:51, bytes 54, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:49197, idle 0:00:51, bytes 50, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:64728, idle 0:00:51, bytes 49, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:64309, idle 0:00:51, bytes 54, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:63289, idle 0:00:51, bytes 51, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:64174, idle 0:00:52, bytes 54, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.55:39286, idle 0:01:09, bytes 33, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:63726, idle 0:01:09, bytes 54, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:65482, idle 0:01:12, bytes 51, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:65091, idle 0:01:13, bytes 61, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:64976, idle 0:01:13, bytes 57, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:63749, idle 0:00:51, bytes 103, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:64043, idle 0:01:14, bytes 52, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:64267, idle 0:01:24, bytes 45, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:64467, idle 0:01:26, bytes 45, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:65504, idle 0:01:26, bytes 46, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.55:38946, idle 0:01:35, bytes 33, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:63701, idle 0:01:38, bytes 51, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:63879, idle 0:01:46, bytes 45, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.174:58516, idle 0:01:49, bytes 51, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:63227, idle 0:01:51, bytes 62, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.174:65446, idle 0:01:53, bytes 43, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.2:49166, idle 0:01:55, bytes 54, flags -
UDP Outside 199.195.168.4:53 Inside 192.168.1.55:56680, idle 0:02:01, bytes 33, flags -
UDP Outside 192.55.83.30:53 Inside 192.168.1.2:65073, idle 0:00:44, bytes 50, flags -
TCP Outside 74.125.193.109:993 Inside 10.10.1.2:57808, idle 0:39:33, bytes 6392, flags UFIO
TCP Outside 74.125.225.54:443 Inside 192.168.1.20:53863, idle 0:00:13, bytes 0, flags saA
TCP Outside 143.127.93.89:80 Inside 10.10.1.2:60519, idle 0:46:30, bytes 346, flags UO
TCP Outside 74.125.225.32:443 Inside 192.168.1.20:53881, idle 0:00:01, bytes 0, flags saA
TCP Outside 74.125.225.32:443 Inside 192.168.1.20:53880, idle 0:00:01, bytes 0, flags saA
UDP Outside 205.171.3.65:53 Inside 192.168.1.52:60627, idle 0:00:39, bytes 78, flags -
UDP Outside 205.171.3.65:53 Inside 192.168.1.52:52088, idle 0:00:39, bytes 86, flags -
UDP Outside 205.171.3.65:53 Inside 192.168.1.52:50533, idle 0:00:39, bytes 76, flags -
UDP Outside 205.171.3.65:53 Inside 192.168.1.52:63347, idle 0:00:39, bytes 80, flags -
UDP Outside 205.171.3.65:53 Inside 192.168.1.52:62213, idle 0:00:40, bytes 37, flags -
UDP Outside 205.171.3.65:53 Inside 192.168.1.52:52347, idle 0:00:40, bytes 46, flags -
UDP Outside 205.171.3.65:53 Inside 192.168.1.52:58069, idle 0:00:40, bytes 32, flags -
UDP Outside 205.171.3.65:53 Inside 192.168.1.52:50753, idle 0:00:40, bytes 37, flags -
UDP Outside 205.171.3.65:53 Inside 192.168.1.174:52254, idle 0:01:09, bytes 43, flags -
UDP Outside 205.171.3.65:53 Inside 192.168.1.174:50791, idle 0:01:25, bytes 35, flags -
TCP Outside 74.125.225.46:443 Inside 192.168.1.20:53870, idle 0:00:08, bytes 0, flags saA
TCP Outside 17.173.255.101:443 Inside 10.10.1.2:53851, idle 0:56:33, bytes 58, flags UfIO
TCP Outside 64.4.23.147:33033 Inside 10.10.1.2:55944, idle 0:44:45, bytes 558164, flags UFIO
TCP Outside 74.125.225.35:443 Inside 192.168.1.20:53869, idle 0:00:09, bytes 0, flags saA
UDP Outside 64.4.23.175:33033 Inside 192.168.1.174:26511, idle 0:01:17, bytes 28, flags -
UDP Outside 192.54.112.30:53 Inside 192.168.1.2:65380, idle 0:00:44, bytes 49, flags -
TCP Outside 74.125.142.108:993 Inside 10.10.1.2:57908, idle 0:10:47, bytes 7895, flags UIO
TCP Outside 74.125.142.108:993 Inside 10.10.1.2:57907, idle 0:10:49, bytes 20323, flags UIO
TCP Outside 74.125.142.108:993 Inside 10.10.1.2:57906, idle 0:10:47, bytes 6539, flags UIO
TCP Outside 74.125.142.108:993 Inside 10.10.1.2:57868, idle 0:27:44, bytes 6395, flags UIO
TCP Outside 91.190.218.59:443 Inside 10.10.1.2:55942, idle 0:41:39, bytes 2727, flags UFIO
TCP Outside 17.172.233.123:5223 Inside 10.10.1.2:49441, idle 0:23:10, bytes 4409, flags UIO
TCP Outside 74.125.225.41:443 Inside 192.168.1.20:53862, idle 0:00:16, bytes 0, flags saA
TCP Outside 74.125.225.41:443 Inside 192.168.1.20:53861, idle 0:00:16, bytes 0, flags saA
TCP Outside 143.127.93.115:80 Inside 10.10.1.2:60406, idle 0:42:59, bytes 970, flags UFIO
TCP Outside 143.127.93.118:80 Inside 10.10.1.2:60484, idle 0:46:54, bytes 328, flags UO
TCP Outside 17.172.233.98:5223 Inside 10.10.1.2:57896, idle 0:11:28, bytes 5081, flags UIO
UDP Outside 111.221.74.16:33033 Inside 192.168.1.174:26511, idle 0:01:18, bytes 31, flags -
TCP Outside 17.149.36.103:5223 Inside 192.168.1.174:60729, idle 0:00:04, bytes 0, flags saA
UDP Outside 192.5.6.30:53 Inside 192.168.1.2:65317, idle 0:00:44, bytes 51, flags -
UDP Outside 192.12.94.30:53 Inside 192.168.1.2:65356, idle 0:00:44, bytes 54, flags -
TCP Outside 17.149.36.180:5223 Inside 10.10.1.2:55951, idle 0:46:08, bytes 14059, flags UFIO
UDP Outside 111.221.74.28:33033 Inside 192.168.1.174:26511, idle 0:01:20, bytes 33, flags -
TCP Outside 63.235.20.160:80 Inside 192.168.1.20:53873, idle 0:00:08, bytes 0, flags saA
TCP Outside 50.19.127.112:443 Inside 192.168.1.50:60678, idle 0:00:00, bytes 0, flags saA
TCP Outside 65.55.122.234:80 Inside 192.168.1.174:60728, idle 0:00:14, bytes 0, flags saA
TCP Outside 65.55.122.234:80 Inside 192.168.1.174:60727, idle 0:00:15, bytes 0, flags saA
TCP Outside 65.55.122.234:80 Inside 192.168.1.174:60726, idle 0:00:15, bytes 0, flags saA
TCP Outside 65.55.122.234:443 Inside 192.168.1.174:2492, idle 0:00:16, bytes 0, flags saA
TCP Outside 65.55.122.234:2492 Inside 192.168.1.174:2492, idle 0:00:16, bytes 0, flags saA
UDP Outside 157.55.56.170:33033 Inside 192.168.1.174:26511, idle 0:01:21, bytes 37, flags -
TCP Outside 74.125.230.207:443 Inside 192.168.1.20:53866, idle 0:00:11, bytes 0, flags saA
TCP Outside 74.125.230.207:443 Inside 192.168.1.20:53865, idle 0:00:11, bytes 0, flags saA
UDP Outside 111.221.74.18:33033 Inside 192.168.1.174:26511, idle 0:01:17, bytes 29, flags -
UDP Outside 8.8.8.8:53 Inside 192.168.1.20:55546, idle 0:00:06, bytes 46, flags -
UDP Outside 8.8.8.8:53 Inside 192.168.1.20:60277, idle 0:00:06, bytes 46, flags -
UDP Outside 8.8.8.8:53 Inside 192.168.1.20:55618, idle 0:00:34, bytes 43, flags -
UDP Outside 8.8.8.8:53 Inside 192.168.1.52:60627, idle 0:00:36, bytes 78, flags -
UDP Outside 8.8.8.8:53 Inside 192.168.1.52:52088, idle 0:00:36, bytes 86, flags -
UDP Outside 8.8.8.8:53 Inside 192.168.1.52:50533, idle 0:00:36, bytes 76, flags -
UDP Outside 8.8.8.8:53 Inside 192.168.1.52:63347, idle 0:00:36, bytes 80, flags -
UDP Outside 8.8.8.8:53 Inside 192.168.1.20:56958, idle 0:01:24, bytes 34, flags -
UDP Outside 8.8.8.8:53 Inside 192.168.1.20:51360, idle 0:01:26, bytes 34, flags -
UDP Outside 8.8.8.8:53 Inside 192.168.1.174:50791, idle 0:01:27, bytes 35, flags -
UDP Outside 8.8.8.8:53 Inside 192.168.1.20:54134, idle 0:01:46, bytes 34, flags -
UDP Outside 8.8.8.8:53 Inside 192.168.1.174:58516, idle 0:01:50, bytes 51, flags -
TCP Outside 23.207.7.46:80 Inside 192.168.1.55:59350, idle 0:00:02, bytes 0, flags saA
TCP Outside 23.207.7.46:80 Inside 192.168.1.55:59349, idle 0:00:16, bytes 0, flags saA
UDP Outside 205.171.2.65:53 Inside 192.168.1.174:50122, idle 0:00:09, bytes 43, flags -
UDP Outside 205.171.2.65:53 Inside 192.168.1.55:48088, idle 0:00:42, bytes 33, flags -
UDP Outside 205.171.2.65:53 Inside 192.168.1.52:62213, idle 0:00:45, bytes 74, flags -
UDP Outside 205.171.2.65:53 Inside 192.168.1.52:52347, idle 0:00:45, bytes 92, flags -
UDP Outside 205.171.2.65:53 Inside 192.168.1.52:58069, idle 0:00:45, bytes 64, flags -
UDP Outside 205.171.2.65:53 Inside 192.168.1.52:50753, idle 0:00:45, bytes 74, flags -
UDP Outside 205.171.2.65:53 Inside 192.168.1.174:61414, idle 0:00:47, bytes 34, flags -
UDP Outside 205.171.2.65:53 Inside 192.168.1.55:54481, idle 0:01:08, bytes 33, flags -
UDP Outside 205.171.2.65:53 Inside 192.168.1.174:52254, idle 0:01:09, bytes 43, flags -
UDP Outside 205.171.2.65:53 Inside 192.168.1.55:40285, idle 0:01:34, bytes 33, flags -
UDP Outside 205.171.2.65:53 Inside 192.168.1.174:65446, idle 0:01:55, bytes 43, flags -
UDP Outside 205.171.2.65:53 Inside 192.168.1.55:46155, idle 0:02:00, bytes 33, flags -
UDP Outside 66.104.81.70:5070 Inside 192.168.1.174:57609, idle 0:00:11, bytes 46, flags -
UDP Outside 64.4.23.156:33033 Inside 192.168.1.174:26511, idle 0:01:14, bytes 38, flags -
TCP Outside 65.54.167.15:12350 Inside 10.10.1.2:60491, idle 0:11:02, bytes 1405, flags UIO
TCP Outside 17.172.192.35:443 Inside 10.10.1.2:57812, idle 0:56:11, bytes 6116, flags UFIO
UDP Outside 157.55.56.176:33033 Inside 192.168.1.174:26511, idle 0:01:16, bytes 32, flags -
TCP Inside 192.168.1.20:53667 NP Identity Ifc 10.10.1.1:22, idle 0:00:00, bytes 37555, flags UOB
TCP Inside 10.10.1.2:53431 NP Identity Ifc 10.10.1.1:22, idle 0:09:03, bytes 20739, flags UOB
Ran on the ASA while overload statements were down on the router:
ASA5510# packet-tracer input Inside tcp 192.168.1.100 12345 8.8.8.8 80
Phase: 1
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in 0.0.0.0 0.0.0.0 Outside
Phase: 2
Type: NAT
Subtype: per-session
Result: ALLOW
Config:
Additional Information:
Phase: 3
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional Information:
Phase: 4
Type: NAT
Subtype: per-session
Result: ALLOW
Config:
Additional Information:
Phase: 5
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional Information:
Phase: 6
Type: FLOW-CREATION
Subtype:
Result: ALLOW
Config:
Additional Information:
New flow created with id 1988699, packet dispatched to next module
Result:
input-interface: Inside
input-status: up
input-line-status: up
output-interface: Outside
output-status: up
output-line-status: up
Action: allow
Had to put these back in to get to the internet:
CISCO-2811#conf t
Enter configuration commands, one per line. End with CNTL/Z.
CISCO-2811(config)#inter
CISCO-2811(config)#interface f
CISCO-2811(config)#interface fastEthernet 0/0
CISCO-2811(config-if)#ip nat
CISCO-2811(config-if)#ip nat Outside
CISCO-2811(config-if)#exit
CISCO-2811(config)#in
CISCO-2811(config)#interface f
CISCO-2811(config)#interface fastEthernet 0/1.3
CISCO-2811(config-subif)#ip nat inside
CISCO-2811(config-subif)#exit
CISCO-2811(config)#$de source list 1 interface FastEthernet0/0 overload
CISCO-2811(config)#
Screenshot of ASDM: -
Hello !
I m a netword administrator, and i have been looking how to setup web filtering in a network, we are using cisco asa 5510 as a firewall and i have been looking for a way to block url such as facebook and streaming web sites since users are allowed to access to any website and they have been downloding stuff lately and i cant controll the bandwith!!
What u guys recommand !
ThanksHi Neji,
Here you have all the content security options available on the ASA. I think only the CX doesn't apply to your HW but the other options are available.
Block URLs using Regular Experessions (Regex)
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080940e04.shtml
CSC module:
http://www.cisco.com/en/US/products/ps6823/index.html
How to enable the CSC module:
http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/ssm.html
ASA CX module (ASA 5512,5525,5545,5545,5555)
http://www.cisco.com/en/US/docs/security/asa/quick_start/cx/cx_qsg.html
Scansafe:
http://www.cisco.com/web/about/ac49/ac0/ac1/ac259/scansafe.html
Configuration Cisco Cloud Web Security
http://www.cisco.com/en/US/docs/security/asa/asa90/configuration/guide/protect_cloud_web_security.html#wp1559223
Ironport:
http://www.cisco.com/web/about/ac49/ac0/ac1/ac259/ironport.html
How to integrate the ASA with Ironport (WCCP):
https://supportforums.cisco.com/docs/DOC-12623
HTH
Luis Silva
"If you need PDI (Planning, Design, Implement) assistance feel free to reach"
http://www.cisco.com/web/partners/tools/pdihd.html -
ASA 5510 'bounces' UDP packets. Why?
Hi. I hope to find someone who can shed a light on something that is bugging me for days now. We have an ASA (5510, running 7.2(2)) to connect our subnets to the backbone of the ISP. I received complaints about one specific connection, which I'll "draw" here:
[ remote host 192.87.x.y (A) ] -- {"Internet"} -- [ Telecity Router ] -- [ Our ASA ] -- [ switch ] -- [ fibre ] -- [ switch ] -- [ our host 82.199.c.d (B) ]
What happens is the following: I can successfully ping from A to B and back. I can also traceroute (UDP) from A to B and back. But a specific UDP packet sent by A (port 9001) to B (port 5432) is causing a problem. "Our ASA" does not route the packet to the correct interface, but sends it back to the Telecity router instead. Which in turn sends it back to "Our ASA" (since it is destined for our subnet). This goes back and forth for 60 times and then the TTL is expired.
I have no idear what is happening here. The access-lists are correctly configured (as far as I know), but even if they weren't I would expect the packets to get dropped rather than put back on the sending interface. This packet is bounced (on ethernetlevel, the IP part remains the same apart from the TTL) to the sending router.
Any pointers as to where to look for what is causing this and how to investigate this further are highly appreciated.
FrankHi Frederico. Of course I tried the packet tracer as one of the first tools :-). It showed a complete path (I used ASDM). Now I retried it (via the CLI) and something strange happens. This is a packet trace A to B with udp from port 9001 to 5431 (not 5432):
Phase: 1
Type: FLOW-LOOKUP / ALLOW / Found no matching flow, creating a new flow
Phase: 2
Type: ROUTE-LOOKUP / ALLOW / in my_DMZ 255.255.255.240 my_DMZ
Phase: 3
Type: ACCESS-LIST / ALLOW / access-group my_backbone_access_in in interface my_backbone
access-list my_backbone_access_in extended permit ip any my_DMZ 255.255.255.240
Phase: 4
Type: IP-OPTIONS / ALLOW
Phase: 5
Type: ACCESS-LIST / ALLOW / access-group my_DMZ_access_out out interface my_DMZ
access-list my_DMZ_access_out extended permit ip any object-group host_group
object-group network host_group
network-object host myHost
Phase: 6
Type: IP-OPTIONS / ALLOW
Phase: 7
Type: FLOW-CREATION / ALLOW / New flow created with id 7342770, packet dispatched to next module
Phase: 8
Type: ROUTE-LOOKUP / ALLOW / found next-hop myHost using egress ifc my_DMZ
adjacency Active
next-hop mac address 00bb.ccdd.eeff hits 1
Result:
input-interface: my_backbone / input-status: up / input-line-status: up
output-interface: my_DMZ / output-status: up / output-line-status: up
Action: allow
As you can see it is a complete path. But this is what happens if I try it for A/9001 to B/5432:
Phase: 1
Type: FLOW-LOOKUP / ALLOW / Found flow with id 12, using existing flow
Module information for forward flow: snp_fp_inspect_ip_options, snp_fp_adjacency, snp_fp_fragment, snp_ifc_stat
Module information for reverse flow: snp_fp_inspect_ip_options, snp_fp_adjacency, snp_fp_fragment, snp_ifc_stat
Result:
input-interface: my_backbone / input-status: up / input-line-status: up / Action: allow
Apparently the packet is send into an existing flow (is there a command to see what this flow is?) and that is where it ends. Now I need to find out why this is happening... This firewall has been reloaded a few times, but that did not solve the problem. Any pointers are highly appreciated as was this hint.
Frank -
Cisco ASA 5510 Content Security bundle
Hello,
please help me to understand if i buy the Cisco ASA 5510 Content Security bundle for my network found there is 1 yr subscription for the content
security features. what are services included in it. Does URL blocking and filtering includ in this subscription or its a seperate features.
Thanks,
Saroj PradhanHere is the license for CSC module and it lists what is included in Basic and Plus CSC license:
http://www.cisco.com/en/US/docs/security/csc/csc66/administration/guide/csc1.html#wp1045405
One year subscription is providing you the ability to upgrade the virus scan engine, spyware pattern file, anti spam, etc -
I want to ask about Anti-X defenses like network anti-virus, anti-spyware, and URL filtering. Supported at ASA 5510, or i need to order additional module. And if it is supported what about Anti-Virus License supported and how many users per this license.
Your speedy action is appreciated.
Thanks in advanceYou will need to purchase an SSM/IPS card for your ASA box. I'm not sure of the licensing although I donlt believe it is per-user. You should contact Customer service for that information.
-
ASA 5510 - Memory : 1 Slot or 4 Slots?
Is there a way of ascertaining whether my 5510's have 1 memory slot or 4 memory slots without having to open the chassis?
I need to order the appropriate memory upgradfe kits.
Thanks.Manufacturing may be able to tell us if the unit was shipped with 1 or 4 slots with the serial number.
CSCtd80603 DOC: Only One Memory Slot Should be Used on ASA 5510
http://www.cisco.com/en/US/docs/security/asa/hw/maintenance/guide/procs.html#wp1075832
For memory upgrade in the Cisco ASA 5510 with
four memory sockets, use slot 1 - P13 and note that only one slot must
be populated at all times. For optimum performance in the
Cisco ASA 5520 and the Cisco ASA 5540 , install the DIMMs in slots P13
and P15, if you are populating only two slots.
[Wrap text] [Edit this enclosure]
R-comments: Added 03/12/2010 16:37:30 by sheema
[Unwrap text] [Edit this enclosure]
R-comments: Added 03/12/2010 16:37:30 by sheema
[Unwrap text] [Edit this enclosure]
N-comments: Added 02/26/2010 09:19:09 by aossipov
[Wrap text] [Edit this enclosure]
N-comments: Added 02/26/2010 09:19:09 by aossipov
[Unwrap text] [Edit this enclosure]
N-comments: Added 02/26/2010 09:19:09 by aossipov
[Unwrap text] [Edit this enclosure]
Release-note: Modified 02/26/2010 09:18:35 by aossipovSymptom:
Cisco ASA 5500 Series Adaptive Security Appliance Hardware Installation Guide mistakenly instructs to use slots 1 and 3 or slots 2 and 4 for memory upgrades on some ASA 5510 boxes with 4 memory sockets. On the contrary, the Dual In-line Memory Module (DIMM) should only be inserted in slot 1 on all ASA 5510 devices; slots 2-4 should not be used. This defect is filed to correct the documentation.
[Wrap text] [Edit this enclosure]
Release-note: Modified 02/26/2010 09:18:35 by aossipov
[Unwrap text] [Edit this enclosure]
Release-note: Modified 02/26/2010 09:18:35 by aossipov
[Unwrap text] [Edit this enclosure]
Affected_Customer: Added 02/10/2010 13:55:22 by dwhitejr
[Wrap text] [Edit this enclosure]
Affected_Customer: Added 02/10/2010 13:55:22 by dwhitejr
[Unwrap text] [Edit this enclosure]
Affected_Customer: Added 02/10/2010 13:55:22 by dwhitejr
[Unwrap text] [Edit this enclosure]
MFG-Info: Added 02/10/2010 13:49:50 by dwhitejr
[Wrap text] [Edit this enclosure]
MFG-Info: Added 02/10/2010 13:49:50 by dwhitejr
[Unwrap text] [Edit this enclosure]
MFG-Info: Added 02/10/2010 13:49:50 by dwhitejr
[Unwrap text] [Edit this enclosure]
Eng-notes: Added 12/14/2009 09:42:14 by aossipov
[Wrap text] [Edit this enclosure]
Eng-notes: Added 12/14/2009 09:42:14 by aossipov
[Unwrap text] [Edit this enclosure]
Eng-notes: Added 12/14/2009 09:42:14 by aossipov
[Unwrap text] [Edit this enclosure]
I-comments: Added 12/14/2009 09:35:48 by aossipov
[Wrap text] [Edit this enclosure]
I-comments: Added 12/14/2009 09:35:48 by aossipov
[Unwrap text] [Edit this enclosure]
I-comments: Added 12/14/2009 09:35:48 by aossipov
[Unwrap text] [Edit this enclosure]
J-comments: Added 12/14/2009 06:19:04 by dwhitejrThis bug is not accurate. The doc is correct.
The original ASA-5510s shipped with 4 DIMM sockets. Only after production for
about a year was the 5510 re-worked and we came out with a cost reduced model
which reduced the DIMM sockets from 4 to 1. This was verified by MFG.
[Wrap text] [Edit this enclosure]
J-comments: Added 12/14/2009 06:19:04 by dwhitejr
[Unwrap text] [Edit this enclosure]
J-comments: Added 12/14/2009 06:19:04 by dwhitejr
[Unwrap text] [Edit this enclosure]
SS-Review: Added 12/13/2009 11:28:45 by aossipov
[Wrap text] [Edit this enclosure]
SS-Review: Added 12/13/2009 11:28:45 by aossipov
[Unwrap text] [Edit this enclosure]
SS-Review: Added 12/13/2009 11:28:45 by aossipov
-KS -
Hello all!
I was wondering if anyone new the difference out there between an ASA5510-k8 and k9. Is this a software or hardware version. If I was using 2 ASA's in failover/standby environment those the 2 need to match or can these be different. Any feedback would be helpful Thanks.Hi Edwin,
Please see below the information ref to 5510 licensing (gives you the differences between K8 &K9) and Active/standby failover implementation requirements for ASA...
Cisco ASA 5510 Firewall Edition includes 5 Fast Ethernet interfaces, 250 IPsec VPN peers, 2 Premium VPN peers, 3DES/AES license
ASA5510-BUN-K9
Cisco ASA 5510 Firewall Edition includes 5 Fast Ethernet interfaces, 250 IPsec VPN peers, 2 Premium VPN peers, DES license
ASA5510-K8
Cisco ASA 5510 Security Plus Firewall Edition includes 2 Gigabit Ethernet + 3 Fast Ethernet interfaces, 250 IPsec VPN peers, 2 Premium VPN peers, Active/Standby high availability, 3DES/AES license
ASA5510-SEC-BUN-K9
Licensing Requirements for Active/Standby Failover
The following table shows the licensing requirements for this feature:
Model
License Requirement
ASA 5505
Security Plus License. (Stateful failover is not supported).
ASA 5510
Security Plus License.
All other models
Base License.
Prerequisites for Active/Standby Failover
Active/Standby failover has the following prerequisites:
•Both units must be identical security appliances that are connected to each other through a dedicated failover link and, optionally, a Stateful Failover link.
•Both units must have the same software configuration and the proper license.
•Both units must be in the same mode (single or multiple, transparent or routed).
Below are the links for reference..
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/product_data_sheet0900aecd802930c5.html
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/ha_active_standby.html
hth
MS -
Difference between ASA-SM1 and FWSM.What is the throughput of each of them?
Can any1 tell me wat is the difference between ASA-SM1 and FWSM
and what is the throughput of it?
Thanks in advance
KhemThe FWSM is end of sale. It has been replaced by the ASA-SM1.
See the following link for details of the performance differences between the two devices:
http://www.cisco.com/en/US/prod/collateral/modules/ps2706/ps11621/qa_c67-662207.html
Don't forget to rate all posts that are helpful. -
Cisco IPS SSM 10 Sensor can't update signature file from ASA 5510
Cisco ASA 5510 IPS Firewall with ASA-SSM-10 Module. I am trying to do a manual update of the signature file and get the following error:
Error: execUpgradeSoftware : couldn't connect to host
I have confirmed that I can ping the ftp server successfully from the ASA and the command I am trying to use from the configure terminal of the module is:
upgrade ftp://[email protected]//IPS-sig-S813-req-E4.pkg
I have also tried via http and it does not work as well. Any thoughts?to connect to ftp there should be username usually anonymous and password whitch can be any. check in ftp server
aip_ssm_card# copy ftp://192.168.15.12/JAF1308ARNJ_20131009032200919.lic license-key
User: anonymous
Password: *********
the username and/or the password are incorrect
aip_ssm_card# copy ftp://192.168.15.12/JAF1308ARNJ_20131009032200919.lic license-key
User: 123
Password: ***
File opening error
I made special user 123 on ftp server with password 123
aip_ssm_card# copy ftp://192.168.15.12/JAF1308ARNJ_20131009032200919.lic license-key
User: 123
Password: ***
aip_ssm_card#
and dont forget to rate post -
ASA 5510 in Transparent Mode-Guidelines.
Dear all,
I need to convert routed mode to transparent mode on my ASA-5510 with inbuilt IPS.
let me know which of the following features configured on my firewall will have issue if converted to transparent mode:
1. static routes.
2. object-groups.
3. ACLS.
4. URL-filter (Websense).
5. IPS . ( i doubt this )
6. have 3 data and 1 Mgmt interfaces.
7. syslog.
8. SNMP
I'm sure point 5 and 6 will have issues, need to confirm.
need to confirm this by EOD,
( 5 hours more).
thanks in advance.
Shukla.Does not participate in routing protocols but can still pass routing protocol traffic through it. You can define static routes for the traffic originated by the ASA.
in transparante mode the devices dehind and infront of the firewall will be in the same ip subnet as the firewall will be a L2 device!!
ACLs can be configured normally
syslog as well
obgect groups as well
Address translation is inherent when a firewall is configured for routed mode. Beginning with
ASA 8.0, address translation can be used in transparent mode as well
Does not participate in multicast. However, it allows passing the multicast traffic through it using the ACLs.
Does not support QoS.
Inspects Layer 2 and higher packet headers
as long as u can use
policy-map global_policy
then u can integrate with IPS if u mean AIP-ssm modul
transparent also known as a Layer 2 firewall or a stealth firewall, because its
interfaces have no IP addresses and cannot be detected or manipulated. Only a single
management address can be configured on the firewall
In transparent mode, a firewall can support only two interfaces-the inside and the outside. If
your firewall supports more than two interfaces from a physical and licensing standpoint, you
can assign the inside and outside to two interfaces arbitrarily. As soon as those interfaces are
configured, the firewall does not permit a third interface to be configured.
Some platforms also support a dedicated management interface, which can be used for all
firewall management traffic. However, the management interface cannot be involved in
accepting or inspecting user traffic
Configure a management address:
Firewall(config)# ip address ip_address subnet_mask
The firewall can support only a single IP address for management purposes. The address is
not bound to an interface, as in routed mode. Rather, it is assigned to the firewall itself,
accessible from either of the bridged interfaces.
The management address is used for all types of firewall management traffic, such as Telnet,
SSH, HTTP, SNMP, Syslog, TFTP, FTP, and so on.
A transparent firewall can also support multiple security contexts. In that case, interface IP
addresses must be configured from the respective context. The system execution space uses
the admin context interfaces and IP addresses for its management traffic
You do not have to configure a static route for the subnet directly connected to the firewall
interfaces. However, you should define one static route as a default route toward the outside
public network
i wish i covered all ur questions
good luck
if helpful Rate -
I have turned on the aaa command authorization without applying adequate privileges to the user. I can now login through that user but the ASA 5510 displays an error :ASA5510# show run
ERROR: % Invalid input detected at '^' marker.
ERROR: Command authorization failed .need your help to resolvr this issue
Posted by WebUser Mugisha VianneyCan I access both the FW and IPS through the dedicated management port via SSH and ASDM/IDM?
Sorta, you can ssh to the ASA and from there establish a backplane connection to the module.
Can I assign the management port an external IP address and to establish a L2L VPN tunnel for remote management and tunnel syslog and IPS logs through it?
Would I be able to route Syslog and IPS event through the Management port to a remote event collector?
Yes, but you can't do the IPS part though.
The IPS is an independant unit and will use its own management interface to send logs, the only way you can do this is to log into the ASA, then into the IPS and get the logs you are looking for.
http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/fwmode.html#wp1198794
http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/fwmode.html#wp1214750
Cabling clarification: internal switch connected to the ASA's management interface and to the IPS' management interface.
This is ok, if you want the units to communicate make sure they are part of the same vlan. -
Unable to see interface on ASA 5510 Firewall
Hi All,
I am unable to see 4th interface on my firewall i.e fastether0/3 on my firewall ASA 5510.
Below is the output.
ciscoasa# sh int ip br
Interface IP-Address OK? Method Status Protocol
Ethernet0/0 x.x.x.x YES CONFIG up up
Ethernet0/1 x.x.x.x YES CONFIG up up
Ethernet0/2 unassigned YES unset administratively down down
Internal-Control0/0 127.0.1.1 YES unset up up
Internal-Data0/0 unassigned YES unset up up
Management0/0 192.168.1.1 YES CONFIG up up
Please suggest what could be the reason.
Regards
PankajHi Ramraj,
Even i have the base license for my ASA 5510 which is showing all the 4 interfaces in sh ver. I don't think so license would be an issue. There should be some IOS code bug that needs to be upgraded. If this goes for an OS upgrade it should get resolved.
Its not showing up in sh ver . As Karsten said he might be running on old IOS version.
fy-a# sh ver
Cisco Adaptive Security Appliance Software Version 8.4(4)1
Device Manager Version 6.4(5)
Compiled on Thu 14-Jun-12 11:20 by builders
System image file is "disk0:/asa844-1-k8.bin"
Config file at boot was "startup-config"
fy-a up 1 day 1 hour
Hardware: ASA5510, 1024 MB RAM, CPU Pentium 4 Celeron 1600 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW016 @ 0xfff00000, 2048KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.06
Number of accelerators: 1
0: Ext: Ethernet0/0 : address is 2c54.2d0c.8f1a, irq 9
1: Ext: Ethernet0/1 : address is 2c54.2d0c.8f1b, irq 9
2: Ext: Ethernet0/2 : address is 2c54.2d0c.8f1c, irq 9
3: Ext: Ethernet0/3 : address is 2c54.2d0c.8f1d, irq 9
4: Ext: Management0/0 : address is 2c54.2d0c.8f1e, irq 11
5: Int: Not used : irq 11
6: Int: Not used : irq 5
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 50 perpetual
Inside Hosts : Unlimited perpetual
Failover : Disabled perpetual
VPN-DES : Enabled perpetual
VPN-3DES-AES : Enabled perpetual
Security Contexts : 0 perpetual
GTP/GPRS : Disabled perpetual
AnyConnect Premium Peers : 2 perpetual
AnyConnect Essentials : Disabled perpetual
Other VPN Peers : 250 perpetual
Total VPN Peers : 250 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual
This platform has a Base license.
Serial Number: JMX1AXXXXX
Running Permanent Activation Key: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Configuration register is 0x1
Configuration has not been modified since last system restart.
fy-a#
Ramraj please do correct me if am wrong.
Please do rate if the given information helps.
By
Karthik
Maybe you are looking for
-
DVD SP will not recognize my disc.
Just recently DVD SP stopped recognizing the discs in my DVD Drive. Whenever I send a DVD to burn the software tells me that I need to insert "acceptable DVD recordable media" then when I open the drive and insert a new disc it does nothing. It was w
-
Conky config question - running in multiple columns?
Is it possible to display conky's output in rows rather than in columns? Example: I want to more or less cut my config in 1/2 and have the temps+ everything under them appear to the right of the CPU usage bit. # Swap Usage:$color $swapperc%${color li
-
Acrobat binding edge - duplex or otherwise?
I'm not a regular user of Acrobat Pro, though v.6 (on my machine) and v.9 (on a colleague's) are available to me. So when I was trying to print a longish (100+ pages) document double-sided, with a binding edge, I assumed that my inability to find th
-
I don't know what to do - I don't have any sound coming from my internal speakers, and with headphones there is still no sound coming out. When I go into system preferences under sound, there is nothing there - it says 'no output devices'. What shoul
-
Hello, Could someone please help me understand how to access table cells (in report)? I have a report with a table populated from a channel. It shows, in one column, a list of names (which come from a channel). I have another channel with a list o