Difference in closind balance and opening balance of GL account

Hi,
There is a difference in Closing balance and opening balance of GL account, which is an realisation account, is there any way to find out the reason of the difference.
Previous year balance was transfered to this year by T f.16.
Please support.

HI Vikas,
If it is not too late..check the SAP note # 176067.
Atleast, it might help some one else working on a similar issue.
Hope this helps.
-Pradeep

Similar Messages

  • Mismatch between Closing Balance and Opening balance in FAGLB03

    Hi Guys,
    There is a mismatch for GL account balance between the closing ( 2008 ) and opening balance ( 2009 )
    in the transaction FAGLB03.
    However for the same GL account, the closing balance for year 2008 and opening balance for year 2009 are matching.
    Please suggest why there is a discrepancy.
    Thanks
    Srikanth.

    Hi
    but my question is how is the system showing some amount in the Balance carry forward row.Though the amount is not matching it is showing some amount.
    Where did it pick this amount from?
    Thanks,
    Srikanth.

  • Closing Balance and Opening Balance is difference

    Dear Expret,
    we have post some new Opening entries in last year (In current year) FB01. Document showing post in last year. Problem mentioned belows:-
    1. Without carry-forward the GL Balance in next year. How can it show the next year opening balance.
    2. Only New entry show in next year (Rs. 50000/=). Both entries showing in retained earing accounts also.
    S. No.   GL No.                     Amount
    1.         1000001                  100000/= (Old Enrty)
    2.         1000001                    50000/= (New Entry)
    Please guide me for solve this problem
    (CSB)

    Hi,
    Somes after year end for audit / management adjustment entries postings done with previous year.
    Execute N no of times Balance carry forward T.Code: FAGLGVTR  until you get your closing balances & opening balances are the same. it is not harm to execute again & again.
    up to 4.7EE for balance transfer you can use T.Code:F.16 from ECC 5 / 6 use tcode for balance transfer FAGLGVTR
    Regards,
    Viswa
    Edited by: viswanatha s on Nov 4, 2011 12:54 PM

  • Opening Balance and closing Balance - Crystal Report

    Hi,
    We have a report with account number, date , opening balance , closing balance and transaction amount. we had grouped the report by account. User will run the report with set of date range and we need to find the minimum date to find the opening balance and maximum date to find the closing balance and display them in the account group header for each account.
    WhilePrintingRecords;
    NumberVar CBal;
    If  {Command.VALUEDATE}= Maximum({Command.VALUEDATE}) then
        CBal= {Command.CLOSINGBALANCE};
    +CBal;
    It is showing the closing balance and opening balance in the account group footer. but we could not able to show in the account group header.
    Regards,
    Sreeni

    The easiest way to do this is NOT use variables.
    Sort the data in date order ascending.
    Then simple place the date field in Group header, details and footer.
    Header will now show first date and Footer last date.
    Ian

  • Opening Balances and Closing Balance of customer

    Hi,
    Does SAP provide any standard customer account statement for Opening Balances and Closing Balance for specific date range have given in selection screen?
    The statement also contains reference number, order, and Delivery number.
    Note: FBL5N Transaction code will not sufficient for the requirement, so looking for any other transaction code / report provided by SAP already for it.
    Thanks in advance,
    Shwetha

    Hi,
    There are several standard reports which could be easily accessed through the menu (Accounts Receivable - Information systems). If none of these reports does not suit your requirement, you have to develop your own.
    Regards,
    Eli

  • Opening Balance and closing balance

    Dear All,
                 Can i create a calculated field for ledger opening balance and closing balance. we are using  epicor. I dont know the exact table which captures opening balance and closing balance, where as i got credit balances and debit balances for the segments, i could not find opening and closing balances in this table. table name is GLjrntdtl . Any ideas on this subject please.
    Thanks & Regards,
    Akram

    hi Akram,
    this is a question that you may wish to ask at the epicor forums
    -jamie

  • RG1 register opening balance and closing balance updation

    Hi All,
    We are using the RG1 register recently i.e. after the Functional Upgrade (ECC 6.0). While executing J2I6 RG1 Excel report, opening balance and closing balance is not appearing in the report even though we have done the J1I5 extraction.
    Is it mandatory to update the J_2IRG1BAL table with zero stock as and when the new material codes are created.
    Regards,
    Praveen

    HI
    Yes it is mandatory to update the table J_2IRG1BAL with material form and opening stock etc. for all the new materials
    EXGRP: Excise group of the material
    DATUM: Date from which you want RG1 report i.e. 01.01.2004
    MATNR: Material
    FORM:  P for packed, L for loose. note that the same material cannot be maintained as both packed and loose.
    WERKS: Leave it blank
    Maintain all relevant opening balance fields. These fields start with OP
    Note 951955 - CIN: General clarifications for RG1 goods*
    check the above note
    regards
    Prashanth

  • REGARDING OPENING BALANCE AND CLOSING BALANCE

    Hi, All
    After executing the TCode - FBL3N, we get the details list. There we also need to display the OPENING BALANCE AND CLOSING BALANCE according to G/L Account and Company Code.

    Hi
    For opening balance, please use transaction F.01.
    Then go to special evaluations and choose balance sheet type 4 (opening balance)
    Kind regards
    JeVe

  • Opening balance and closing balance on Receivables Customer Statement repor

    I need an opening balance and closing balance of the customer statement in one report. Currently I developed a custom Customer statement report in report builder 6i. I developed a custom procedure to retrieve the previous statement balance. I’m able to successfully retrieve ending balance statement with sysdate but if I go back to previous date or previous statement date then I’m not getting the right ending balance of the report.
    Even the seeded api arp_customer_aging provides the ending balance for sysdate but not for previous dates because this api always looks back to amount due remaining column(ar_payment_schedules_all).
    Did any one ever develop a custom logic to get previous balance and ending balance on one single customer statement?

    Hi,
    I am working on the same logic. My program loads opening and closing balance and a list of items everyday. The GL_balances table gives you current balance but if you want the previous balance, you have to use : "gl_daily_balances" table and provide accounting_date for which you want the balance.
    Hope this Helps!
    Yogini

  • What is the exact use of 'Day Balance' and 'Period Balance'??

    Hi All,
    Can any body give me a detail and exact description about 'Day Balance' and 'Period Balance' fields used under 'Base Emtitlement' subtree option of V_T559L.
    Thanks,
    Swapnil
    PS : Points will be rewarded for helpful answers...!

    1. First one has to understand that R3 is OLTP system purely used for transactin processing while BW is used for OLAP ie reporting purpose only. At a table level if we do not have  a redundant second table the R3 system will be over loaded when the OLTP & the OLAP systems access the same table for their respective purposes. So we have to take data from the document table with a time lag and put into the statistical tables so that BW will get the data as and when required.
    2. This question is related to 1 and the above answers both.
    3. V3 is a generic process and is used for data extraction from the R3 transaction tables and can be used for any system as such.
    4. Both the processes are independent of each other and there is no relationship.
    Hope this helps
    Cheers
    Viva
    Assign points if this helps.

  • After buying a new Macbook pro and opening an iTunes Match account most of my music is grayed out on my Mac and iPhone. I have not turned on iTunes match on my iPad and all my music is fine.  How do I get my music back????

    After buying a new Macbook pro and opening an iTunes Match account most of my music is grayed out on my Mac and iPhone. I have not turned on iTunes match on my iPad and all my music is fine.  How do I get my music back????

    The most efficacious way to get your music and other personal data onto your new Mac is to restore it from the backup you made of your old computer. Once that is done you can re-enable iTM on the new Mac and your iPhone.

  • If I take my bank card details off my itunes account and opened a new itunes account what would happen to the old account?

    If I take my bank card details off my itunes account and opened a new itunes account what would happen to the old account?

    you're more likely to get quick and accurate answers to an iTunes question in the iTunes forum, this is the GarageBand forum

  • If I take my bank card details off my itunes account and open a new itunes account what will happen to the old account?

    If I take my bank card details off my itunes account and open a new itunes account what will happen to the old account?

    you're more likely to get quick and accurate answers to an iTunes question in the iTunes forum, this is the GarageBand forum

  • GL balances differences between Year end closing and opening balances

    Hi friends,
    One GL account balances showing differences between year end closing & year opening balances.
    Example: 2006 closing balance is  250000 $
                   2007 opening balance is 150000 $
    difference is 100000 $ . why should coming like this. already completed balances carryforward (F.16) in 2006 & 2007 year. 
    any programe for this solution ?
    One more point is  just 2 days back i posted 2 entries for 2006 year equal to 100000 $ . after this entries shall we need go for F.16 (carry forwarded balances).
    please do the needful. It is very urgant issue.
    Raj

    HI,
    There shouldn't be any more postings to a GL Account once Balance carry forward has been executed.
    If postings have been made then you should execute the Balance carry forward again, otherwise you will see difference in opening and closing GL balance (as mentioned by you).
    Regards

  • Difference in closing balance of last year and opening balance of next year

    hi all,
    when i see the cumulative balances of bank g/l in T.code-FS10N for the last year and see the balance carried forward in this year , i have found a small amount of difference of Rs.300. I have checked the line item balances and it is showing the balances of last year only. Can anybody please tell me the reason of such difference . Is it a normal feature?
    Thanks-
    SAMRAT

    Hi,
    Please check the last year balance, if that is ok.
    Please carry forward the balance once again, then check.
    FAGLGVTR for new GL
    Note: There may be possibility that after doing the balance carry forward, user may done any back dated posting.
    Thanks and Regards
    Binoj M D

Maybe you are looking for

  • Can I create a network where the Time Capsule gets its internet connection from my iMac?

    Hi, I've recently bought a Time Capsulebut I'm having some problems with it on my university network. It is an Eduroam network, so each computer has to authenticate before it can get an Internet connection – I can't use the Time Capsule normally as i

  • Do I need to uninstall Adobe CS while running Adobe CC?

    Is there a conflict between CS and CC on my system?

  • Banking query- SAP B1

    hiii experts            i am presenting a scenario here plaz guide me sequence in sap b1 "A customer has paid 10000 rs as a payment on account to the company, and  after a transanction with the customer company has raised an invoice for 15000 now the

  • Background work process

    How to increase the background work processes on BW SYSTEM Thanks your help in advance Msr

  • Premiere CS4, problems after exporting

    So I just finished exporting/rendering the clip I made. And I have a slight problem with it's output, which happens to be darker than the original wherever I had slowed down the speed of parts in the clips. So now everything that is the same speed as