Difference in closing balance of last year and opening balance of next year

hi all,
when i see the cumulative balances of bank g/l in T.code-FS10N for the last year and see the balance carried forward in this year , i have found a small amount of difference of Rs.300. I have checked the line item balances and it is showing the balances of last year only. Can anybody please tell me the reason of such difference . Is it a normal feature?
Thanks-
SAMRAT

Hi,
Please check the last year balance, if that is ok.
Please carry forward the balance once again, then check.
FAGLGVTR for new GL
Note: There may be possibility that after doing the balance carry forward, user may done any back dated posting.
Thanks and Regards
Binoj M D

Similar Messages

  • Difference in closind balance and opening balance of GL account

    Hi,
    There is a difference in Closing balance and opening balance of GL account, which is an realisation account, is there any way to find out the reason of the difference.
    Previous year balance was transfered to this year by T f.16.
    Please support.

    HI Vikas,
    If it is not too late..check the SAP note # 176067.
    Atleast, it might help some one else working on a similar issue.
    Hope this helps.
    -Pradeep

  • Mismatch between Closing Balance and Opening balance in FAGLB03

    Hi Guys,
    There is a mismatch for GL account balance between the closing ( 2008 ) and opening balance ( 2009 )
    in the transaction FAGLB03.
    However for the same GL account, the closing balance for year 2008 and opening balance for year 2009 are matching.
    Please suggest why there is a discrepancy.
    Thanks
    Srikanth.

    Hi
    but my question is how is the system showing some amount in the Balance carry forward row.Though the amount is not matching it is showing some amount.
    Where did it pick this amount from?
    Thanks,
    Srikanth.

  • Carried forward balance through f.07 and ledger balance are not tallying

    Hi experts,
    When I try to execute F.07 last month (fiscal year April-March), carried forward balance and closing balance as per ledger are not matching for Customers. Could you suggest  the possible reasons?
    Thanks

    Hello,
    Maybe the mentioned SAP note is helpful for you.
    I have had a similar quesition.
    Reasons for variances at year end balance and opening balance at sub ledger account (customer, vendor)?
    all the best
    Erwin

  • I've been taking screen shots for years and opening them from my desktiop. Suddenly, today, I've lost the ability to open them. I can right click on the picture and do "quicklook", but that's it. They just won't open.   Similary, if I scan an image and sa

    I've been taking screen shots for years and opening them from my desktiop. Suddenly, today, I've lost the ability to open them. I can right click on the picture and do "quicklook", but that's it. They just won't open.
    Similary, if I scan an image and save it as a PDF file in pictures, I'm suddenly not able to open it either!
    Why?

    Move the com.apple.screencapture.plist file out of /username/Library/Preferences/ to the Desktop, log out and back in, and try again.
    BTW, use the default 10 point setting for text. Your choice just wastes screen space.

  • How to restrict the last record and not moving to next reocrd

    1) how to restrict the last record and not moving to next reocrd.
    2) Also for the F6 key(for new record).

    When you are on the last record, next-record will create a new one, so that my question is do you want to forbid new record creation.
    Francois

  • Checking balances with asset register and Trial balance

    Hi ,
    Need to develop a report for checking balance with asset register  and Trial balance. Now asset balances and TB is not matching. We need report at Plant level. pls suggest
    Regards

    Hi,
    In the most reports you can select current book value (you first have to select ALL SELSECTIONS)
    These values are the same as on FI on your G/L accounts

  • GL balances differences between Year end closing and opening balances

    Hi friends,
    One GL account balances showing differences between year end closing & year opening balances.
    Example: 2006 closing balance is  250000 $
                   2007 opening balance is 150000 $
    difference is 100000 $ . why should coming like this. already completed balances carryforward (F.16) in 2006 & 2007 year. 
    any programe for this solution ?
    One more point is  just 2 days back i posted 2 entries for 2006 year equal to 100000 $ . after this entries shall we need go for F.16 (carry forwarded balances).
    please do the needful. It is very urgant issue.
    Raj

    HI,
    There shouldn't be any more postings to a GL Account once Balance carry forward has been executed.
    If postings have been made then you should execute the Balance carry forward again, otherwise you will see difference in opening and closing GL balance (as mentioned by you).
    Regards

  • Closing Balance and Opening Balance is difference

    Dear Expret,
    we have post some new Opening entries in last year (In current year) FB01. Document showing post in last year. Problem mentioned belows:-
    1. Without carry-forward the GL Balance in next year. How can it show the next year opening balance.
    2. Only New entry show in next year (Rs. 50000/=). Both entries showing in retained earing accounts also.
    S. No.   GL No.                     Amount
    1.         1000001                  100000/= (Old Enrty)
    2.         1000001                    50000/= (New Entry)
    Please guide me for solve this problem
    (CSB)

    Hi,
    Somes after year end for audit / management adjustment entries postings done with previous year.
    Execute N no of times Balance carry forward T.Code: FAGLGVTR  until you get your closing balances & opening balances are the same. it is not harm to execute again & again.
    up to 4.7EE for balance transfer you can use T.Code:F.16 from ECC 5 / 6 use tcode for balance transfer FAGLGVTR
    Regards,
    Viswa
    Edited by: viswanatha s on Nov 4, 2011 12:54 PM

  • DIfference in closing and Opening Balance in Cash journal

    Dear ALL
    in facing problem in cash journal
    in my cash journal closing  balance showing Rs.2,10,200:00  04/12/2006
    where as opening balance is showing Rs.2,10,100:00 on 05/12/2006
    what could be the problem ?
    can any one  Explain
    Regards,
    choudary

    Please refer SAP note no.377853

  • Year End Openning Balance

    Hi experts,
    I have a small doubt regarding OB
    Year 010407 to 310308
    I have entered trialbalance as openning balance of 310308 with date 310308
    when i run the trial balance report for year 010408 to 310309
    OB column is empty. i also selected the option 'OB From Start of Fiscal Year'
    I think the previous year balance has to be cary forward to nxt fiscal year as OB.
    am i missing something, please advice
    Thanks in Advance,
    Sandeep

    Hi,
    Thanks for the reply,
    I have closed the period too by year end closing procedure, the diff of rev  & Exp is transfer to the new year.
    My issue is, doesn't it required to show the OB of Assets, liabilities & equity balance in new fiscal year OB column when i run the report.
    Regards,
    Sandeep

  • Difference in Trial Balance & Legder report because Zeero opening balance appearing in Trial balance for some accounts

    Hi Experts,
    When I am generating System trial balance report, it shows null in opening balance column for some of accounts while ledger for respective accounts are showing correct figure of opening balance.
    And because of this my trial balance showing wrong figures
    Also, I have checked it through query report, it showing same opening balance figure as ledger report.
    (Attachment for trial Bal, Ledger & Query reports for one of the account are attached here)
    I have checked all selection criteria in Trial balance report, but nothing is working.
    Please suggest me any solution for for above issue.
    regards,
    Raviraj

    Hi Raviraj
    Can you confirm In Trail Balance Opening balance for the Period is OB Starts from Company Activity.
    With Regards
    Balaji Sampath

  • Get date between 1st of current year and 31st Dec of current year

    Hello:
    I have a query where there is a check on date that has to be between 1 jan curr year and 31 dec curr year. How can I have that since the year component will be changing from year to year?

    use the year component of sysdate?
    ME_XE?select to_char(sysdate, 'YYYY') from dual;
    TO_CHAR(SYSD
    2007
    1 row selected.
    Elapsed: 00:00:00.12
    ME_XE?select to_date('01-jan-'||to_char(sysdate, 'YYYY'), 'DD-MON-YYYY') from dual;
    TO_DATE('01-JAN-'||TO_CHAR
    01-JAN-2007 12 00:00
    1 row selected.
    Elapsed: 00:00:00.18

  • GL Line items and Opening balance extraction

    Hi
    I would like to extract BSEG line item details into BI, and this I can achieve using the extractor 0FI_GL_4 (we are still using the old GL ledger). We need to have the WBS and Profit Center fields for this extractor, and this availble in the BSEG
    However, as we know this extractor does not bring in the opening balances.
    We need to have opening balances as well and this can be achieved using the extractor 0FI_GL_6. But this does not have the fields WBS and Profit Center. Can this totals extracor be enhanced to include these two fields or would this become a very big challenge? If it can be done what tables can be used to do the join.
    Thanks

    Hi Bal
    Check the link below if it answers your query.
    FI_GL Line items-Opening Balance
    Regards
    Anindya

  • Java and SAP in the next years ?

    Hello,
    Is it a good thing to begin to develop around SAP in Java currently ?
    It has been said that it will not be supported if i'm not mistake.
    Thanks,
    Smoltok

    Hi
    Java is a Platform independent technology so that it can be used by all the system, ERP like SAP need to communicate with
    different type of system and nedd to handle huge set of data. For this Java is a power full language hence Java is used in SAP. J2ee has a huge number of Design patters wich will help to solve the archeture problem easily.
    SAP netweaver is mostly build on Java engine only. So the combination of SAP and Java will be success for next Years
    but People say ABAP  is going to replace JAVA in SAP, But as of its quite impossibel because ABAP is mainly ment for Data processing.
    Regards
    Noel

Maybe you are looking for

  • Arrays or Variable

    Hi, I’m trying to get a pass rating from my database, this information is not in the database but it’s calculated from information in the database. I have 1500 user enrolled in my training and each individual is in pps_principals.name What I want is

  • HT5097 How do I find my files after a TC restore using Migration Assistant?

    How do I find my TC backup? My difficulties started with my MacBook Pro going totally dead.  Took it to the Apple Store, where they identified a problem with the RAM.  They fixed it, and also reinstalled Lion, but without my applications - Pages, iPh

  • Calcualtion of Material cost  for custom  program

    Hello all For a particular cost estimate we need to calacualte only the material cost in that particular material and thi swe required for all the material i had checked all the costing related table but not able to do tha kindly help anil

  • ITunes stops running when trying to play movies

    I have several movies loaded into iTunes but when I try to view them on my TV using Apple TV iTunes stops running and wants to close down. I have played movies before without any issues but this has only happened in the last few days. Does any one ha

  • Problem in sum a field through select command

    Dear Sir(s), I want to sum kbetr (no. of packing) for same knumv(invoice no.) in table konv. e.g. invoice no.           no. of packing (knumv)                   (kbetr) 001                         2 001                         3 002