Difference in currency  between customer order and accounting document

Dear gurus,
While I am cretaing customer order SAP calculates currency from Exchange Rate="B" at OB08 screen. This situation results because of Currency type in customer master data. But in the accounting document SAP calculates currency from Exchange Rate="M" at OB08 screen. As a result; this is causes problems.
I want SAP to calculate currency which is  entered in customer master data. It might be M,B  etc.. According to the CUSTOMER.
How can I fix this issue?
Thnks regards,

Hi,
This is a complicated scenario.
There are 3 currencies involved in any transaction
Document currency (from customer master)
Condition type currency (from condition record)
Local currency (Currency of company code )
During account posting in FI, the document currency will be converted into local currency and posting in local currency will be made. Also there is a posting in document currency also. For the conversion between document currency and local currency, by default M is used. For other exchange rate types, it should be enabled by means of user exits in sales order or invoice. The exchange rate which is available in invoice for this conversion (doc currency to local currency) is copied to acctg documnent. It is not freshly calculated in accounting document.
Conversion from customer currency to document currency happens either through M or through the customer master exrate type.
Now you decide how you want to handle the scenario. Customer currency to document currency can be done as  per the customer master you maintain. But if you want to convert document currency to local currency (provided customer currency and doc currency are same), then only M will be used in standard.
If you are in a scenario where all the 3 currencies are different, then the way by which the system calculates the exchange rate is through an indirect triangulation process, which is little complex. In this case, it will use only one exchange rate type. Hence this scenario in your case will have problem. If you test all these scenarios, you will come to know.
We faced this problem an year ago and then finally realised that it is not possible to use two xng rate type in one SD cycle. This is because the exchange rate type is stored in VBAK, VBRK and so on and hence it is not possible to use two xnge rates or the rate maintained in customer master throughout the cycle. The sales transaction is controlled by Cust master and FI transactions are controlled by M

Similar Messages

  • Difference in currency rate between customer order and accounting document

    Dear gurus,
    While I am cretaing customer order SAP calculates currency from Exchange Rate="B" at OB08 screen. This situation results because of Currency type in customer master data. But in the accounting document SAP calculates currency from Exchange Rate="M" at OB08 screen. As a result; this is causes problems.
    I want SAP to calculate currency which is entered in customer master data. It might be M,B etc.. According to the CUSTOMER.
    How can I fix this issue?
    Thnks regards,

    Hi,
    In the copy routine from Sales Order to Billing, copy the exhcange rate from sales order.
    And then the billing will get the same exchange rate as in sales order and thus will also pass the same to the accounting.
    Regards,
    SDNer

  • Different currencies between customer order and invoice(OB08)

    Dear gurus,
    While  I am creating customer order (VA01) SAP calculates currency(EUR to TRY) from (OB08) the line which starts ExRt=B.
    But in the billing SAP calculates currency from (OB08)  the line which starts ExRt=M.
    As a result;  a deviation occurs..
    I want, SAP to calculates currency from ExRt=B in the invoice.
    What must I do to fiz this problem?
    Thanks in advance;

    Hello,
    VTFL.  Go to the item category and select the exchange rate type.
    Regards
    Waza

  • Link between inv. number and accounting document number

    Hi Frnds,
    When i receive  a partial receipt (of an invoice) from a customer, i am getting the link between invoice number and accounting document number from a table (BSEG), but when i am receiving the final settlement amount from the customer, i m not getting the link between the inv. no. and accounting document number. Can anyone tell me how can i get the same?

    Hello,
    Try to prepare query based on tables BSIK, BSAK and BSEG. (Transaction code SQVI)
    Regards,
    Ravi

  • Link between invoice number and accounting document number

    Hi Frnds,
    When i receive a partial receipt (of an invoice) from a customer, i am getting the link between invoice number and accounting document number from a table (BSEG), but when i am receiving the final settlement amount from the customer, i m not getting the link between the inv. no. and accounting document number. Can anyone tell me how can i get the same?

    hi
    try these tcodes
    FBL5N
    FB02
    regards

  • FM for linking deleted sales order and accounting document

    Hi there,
    I have this scenario:
    -I create a sales order and make a certain amount of downpayment.
    -At the save of the order, an accounting document is created in BSEG table with reference to this order (BSEG-VBEL2).
    -I delete the order that I created in step 1.
    -The accounting document still exists in BSEG.
    Question:
    A direct select on BSEG with vbel2, takes a very long time.
    Can anyone suggest a way to improve the performance, or does anyone know of a Fuction Module that I can use?
    Thanks,
    Deepti

    Hi,
    Con't you use alternative table, Example insted BSEG use BSID and create a index on VBEL2 to improve the performance..
    Regards,
    Srinivasa M

  • Link between Customer Purchase Order and Accounting Document Number

    Hello all,
    is there a table in SAP that contains the purchase order number of the customer and the Accounting Document Number (belnr)?
    thanks in advance
    Anne

    Do this:
    SELECT awtyp awkey
      FROM bkpf
      INTO CORRESPONDING FIELDS OF bkpf
      WHERE bukrs = bsis-bukrs
        AND belnr = bsis-belnr
        AND gjahr = bsis-gjahr.
    ENDSELECT.
    This should give you SD billing document information.
    Rob

  • The reference field between purchase order and account assignment tables

    i need to reterieve the account assignemnt category (G_L_ACCT) which is in the table bbp_pdacc for an the purchase order item, i am not able to find the reference field. I am working on the SRM system.
    promise to reward points
    regards,
    anitha

    Well, the account assignment category in SRM table BBP_PDACC is ACC_CAT. If this isn't what you are looking for, could you please elaborate your requirements?
    Rob

  • Link between billing document and accounting document number

    Hi Frnds,
    When i receive a partial receipt (of an invoice) from a customer using f-28, i am getting the link between invoice number and accounting document number from a table (BSEG), but when i am receiving the final settlement amount from the customer, i m not getting the link between the inv. no. and accounting document number. Can anyone tell me how can i get the same?
    I have tried table BSAD and BSID.

    Hi,
    I will give you two options.
    1)Goto FBL5n.Enter your customer number and company code.Select All items.
    Execute.
    Search for your billing document number using CTRL+F.Select that line.Click on display.
    Here you will find the reference number and clearing document number also.
    2)Goto VF02.
    Enter your billing document number.Enter.
    Press Shift+F4 or the path is:goto-->Accounting document.
    You will get the accounting document number here.
    3)Goto FB03.Key in the document number.Enter.
    Regards,
    Krishna.

  • Difference between Sales Order and Stock Transfer Order(STO)

    Hi Gurus,
    What exactly is a diference between Sales Order and STO?
    Thanks and Regards
    Rohit

    Hi,
    Sales Order Stock
    Sales Order Stock are stock with Special Stock type E. It can fall into the usual stock categories such as unrestricted, blocked etc. but "belongs" to a sales order.  For example, you create a sales order for a part and assign a sales item category that generates an individual requisition, the requirement has an account assignment linking it to the sales order schedule line, you convert that requisition to a Purchase Order.
    When you receive the Purchase Order, the stock is placed in sales order stock. It will show against the sales order/sales order line. It can only be delivered against that sales order line. Any availability check etc for that material on any other sales order will not take it into account as it is not available except to the sales order line the stock is assigned to.
    Stock Transfer Order
    the cross company Stock Transport Orders can be done by:
    - Configure using transaction OMGN
    - Depending upon the sending and receiving plants, maintain sales organization and customer data in customizing.
    - Maintain the supplying plant as a vendor and attach the plant to the vendor in the Vendor Master.
    - Material type has to be HALB or HAWA.
    - Ensure that the company with sales Organization has a plant to take care of stocking.
    - The PO used is NB and not Stock Transfer PO.
       Configure SD for inter-company billing to enable picking up the pricing procedure for billing.
    - Carry Out delivery through process delivery due list and billing through process billing due list.
    Otherwise, You need  to configure your Stock Transport Order settings for your Cross-Company:
    Business Transaction to work.
    1. Customer No. for the Goods Receiving Plant - OMGN
    2. Availability Check- Checking Rule (if necessary) - OMGN
    3. Assign a Delivery Type for the Delivering Plant - OMGN (for Stock Transport Orders, NLCC)
    4. PO type (which i belive you have done) - OMGN
    5. Assign Vendor No. to the Supplying Plant (done) - VK02
    6. Assign Customer No. to the Purchasing Plant for the Inter-Compnay Invoice (but you need to assign this to the Sales Organization pre-assigned to the Purchasing Plant),
    IMG-SD-Billing-InterCompany Billing-Define Internal Customer No. by Sales Org
    ***and by the way for the Invoice to work between Cross-Compnay Plants, you need also to have a Sales Org for the Supplying Plant and a Pricing Determination Procedure.
    REgards,
    vineela

  • "difference between sales order and scheduling agreement "

    hi, 
    i want to know difference between sales order and scheduling agreement and where use scheduling agreement & where sales order ?
    please help
    amit

    Hi Amit,
    Its not hard to find this info at help.sap.com
    Sales Order
    Definition: Request from a customer to a company to deliver a defined quantity of products or provide a service at a certain time. The sales area that accepts the inquiry is responsible for completing the agreement.
    Scheduling Agreements
    Purpose
    A customer scheduling agreement is an outline agreement with the customer containing delivery quantities and dates. These are then entered as schedule lines in a delivery schedule. You can either create schedule lines when you create the scheduling agreement or you can create them later.
    You fulfill a scheduling agreement by creating the deliveries in the schedule as they become due. You process deliveries for a scheduling agreement in exactly the same way as you process a normal delivery. After you have carried out the delivery, the system updates the Delivered quantity field in the scheduling agreement item with the delivery quantity. The following graphic shows the document flow for scheduling agreements.
    Integration
    You would use this component if you had outline agreements with the customer that contained future delivery quantities of materials that would be sent at certain times within a fixed time period.
    If you work with scheduling agreements for the component supplier industry you also need to choose the "Electronic Data Interchange" (EDI) component.

  • Difference between customer exits and user exits

    difference between customer exits and user exits

    Hi,
    USER EXITS->
    1. Introduction:
    User exits (Function module exits) are exits developed by SAP.
    The exit is implementerd as a call to a functionmodule.
    The code for the function module is writeen by the developer.
    You are not writing the code directly in the function module,
    but in the include that is implemented in the function module.
    The naming standard of function modules for functionmodule exits is:
    EXIT_<program name><3 digit suffix>
    The call to a functionmodule exit is implemented as:
    CALL CUSTOMER.-FUNCTION <3 digit suffix>
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    CUSTOMER EXITS-> t-code CMOD.
    As of Release 4.6A SAP provides a new enhancement technique, the Business Add-Ins.
    Among others, this enhancement technique has the advantage of
    being based on a multi-level system landscape (SAP, country versions, IS solutions, partner,
    customer, and so on)
    instead of a two-level landscape (SAP, customer) as with the customer exits.
    You can create definitions and implementations of business add-ins at any level of the system landscape.
    To unify enhancements of the SAP Standard you can migrate customer exits to business add-ins.
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
    In order to find out the user exits for any tcode,
    1. get the developement class of the tcode from SE93.
    2. Now goto transaction SMOD and press F4,
    3. give in the Deve class in the dev class and Press ENTER
    this will show u the exits for any tcode.
    or execute this report
    http://www.erpgenie.com/sap/abap/code/abap26.htm
    which gives the list of exits for a tcode
    http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
    For information on Exits, check these links
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    Regards
    Kiran Sure

  • Difference between customizing request and workbench request?

    Hi ,
    What is the difference between customizing request and workbench request?
    please reply.........

    HI,
    <b>Workbench Requests</b>
    When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
    Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
    Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
    <b>Customizing requests</b>
    Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
    Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
    Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
    pl reward if it helps.
    Thanks
    Sadhu Kishore

  • What's the difference between "Full Name" and "Account Name"

    Just re-install a new OS X Lion. On the "Create Your Computer Account" screen, what's the difference between "Full Name" and "Account Name"?

    Your computer name by default would be "John David Appleseed's Macbook Pro"
    But you can always change that in System Preferences->Sharing
    And yes, the first account you set up will be an administrator.

  • What is the exact difference between Purchse order and purchase requisition

    Hi all,
    What is the exact difference between Purchse order and purchase requisition.
    Thx

    Hi,
    <b>Purchase Requisition</b>-> Staff in an orgn places Pur requisition for want of some goods/products - ME51
    Related Table EBAN
    Request for Quotation(RFQ)-> The Purchase dept in the orgn calls/requests for the quotation for the products against which PR was raised. - ME41
    Vendor Evaluation->After receving the RFQ's, after comparison a Vendor is finalised based on the terms and conditions.
    <b>Purchase Order(PO)</b>-> Pur order was issued to that vendor asking him to supply the goods/products -ME21N
    Tables:EKKO,EKPO
    Goods Receipt Note(GRN)->Vendor supplies the material/Products to the orgn-
    MB01
    Goods Issue (GI) -> People receives their respective itesm for which they have placed the Requisitions
    Vendor, Material ,Qty are mandatory for PO.
    Regards,
    Padmam.

Maybe you are looking for

  • Is there any way to open a map to the location specified in a calendar event?

    Besides opening the event, copying the location, and pasting it into google\bing\etc mapping tools I do not see this rather common functionality available in Lightning. Ideally, right clicking on the event in the calendar (without opening the event)

  • Pushing Loader.content into DisplayObject Freezes Animation

    I am working on a slideshow app which involves a bunch of images with mask effects cycling one after the other. I created a buffer to preload images in the background while the animation plays. I am using Tweener for all my tweens, and this has nothi

  • Extending Seeded iProc Page - Options

    Hi, I need to add extra information to a table on a seeded iProc page. I have successfully added extra columns by substituting the VO and adding columns however there isn't going to be enough space width-wise to accommodate all the fields I need to a

  • Multibridge Pro to Mac Pro

    is possible connect a Multibridge Pro to Mac Pro?

  • Error message when syncing with iPhone

    Since upgrading my OS this week, I've consistently got an error message when syncing playlists with my phone. See below: Can anybody help? Most of these tracks are purchased through iTunes