Difference in DNL (Customizing) objects in CRM 7.0 and CRM 5.0

Hi,
I wanted to know if any new DNL's (customizing objects) have been introduced in the CRM 7.0 version in comparison to CRM 5.0. and if yes then which ones are critical with respect to data integrity and smooth functioning of the system.
Regards
Kshitij Garg

Hi Kshitij,
I dont think there is any new customizing object for CRM7.0 other than from CRM5.0. One have to follow the same procedure to download the customizing objects.
Please find the list of customizing objects for CRM7.0 in the following link:
http://help.sap.com/saphelp_crm70/helpdata/EN/1d/09d1e713d711d6999e00508b6b8a93/frameset.htm
Hope this helps!
Regards,
Chethan

Similar Messages

Performance issue in Webi rep when using custom object from SAP BW univ

Hi All,
I had to design a report that runs for the previous day and hence we had created a custom object which ranks the dates and then a pre-defined filter which picks the date with highest rank.
the definition for the rank variable(in universe) is as follows:
<expression>Rank([0CALDAY].Currentmember, Order([0CALDAY].Currentmember.Level.Members ,Rank([0CALDAY].Currentmember,[0CALDAY].Currentmember.Level.Members), BDESC))</expression>
Now to the issue I am currently facing,
The report works fine when we ran it on a test environment ie :with small amount of data.
Our production environment has millions of rows of data and when I run the report with filter it just hangs.I think this is because it tries to rank all the dates(to find the max date) and thus resulting in a huge performance issue.
Can someone suggest how this performance issue can be overcome?
I work on BO XI3.1 with SAP BW.
Thanks and Regards,
Smitha.

Hi,
Using a variable on the BW side is not feasible since we want to use the same BW query for a few other reports as well.
Could you please explain what you mean by 'use LAG function'.How can it be used in this scenario?
Thanks and Regards,
Smitha Mohan.

Report on activities linked to custom object

Hi,
Is there a way show on a report each activity linked to a custom object record? e.g.
Custom Object name 1 , Activity 1 subject
Custom Object name 1 , Activity 2 subject
Custom Object name 1 , Activity 3 subject
When i use the Custom Object 1 reporting area i add the custom object "name" feild to my report then add "Activity Subject". Each custom object record can have many activity records, however when I run my report it says "No Results" despite there being data set up?
I tried a similar report but instead of showing activities i tried accounts, of which there are a number linked to a single custom object record. When i ran the report it showed a single row for each custom object record, almost as though it was a one to one realtionship between custom object and account, rather than a one to many?
Any thoughts on what might be going wrong? or how i can report on activities per custom object record?
Thanks

Using CO and account subject area, it should be possible to show M:M associations between CO and Account.
But for CO and activity, reporting on M:1 association alone is possible using CO subject areas.

Import records to custom object 2

Hi expert,
Are we able to import records to the custom objects?
For some reason, the import record type does not have custom object 2 for selction. Is it a system bug?
Thanks, Sab.

Sab, make sure you have access to custom object 2 in your role and access profiles.

Custom Object assistance ....

Here's the situation:
I am using the Account Object, Custom Object 01 and then Custom Object 03 as the intersection between the Account and Custom Object 01. This seems to be working fine, however, there is something which I think is odd happening. When viewing the account which has a related object exposed for Custom Object 3 (the intersection table), if I select remove, it removed the record, however the relationship still exists under custom object 3. I would have expected the entire relationship (the record in the intersection component) to be fully removed.
Am I doing something wrong or does this seem to be a flaw in the system ? Any thoughts ????

What I'm trying to do is setup a many-to-many relationship between accounts and 'systems' (custom object). I have used a custom object to define all the 'systems' available. Then I am using another custom object to link the account and system together with additional custom fields to hold various pieces of information which applies to the relationship between the two. Doing this I can see the information from either the account or 'system' side.
Are you saying I should not use Custom Object 3 since it is meant to function independently? I could use one of the custom 4-15 objects, but then the problem arises of not being able to WS or Import into them !! Maybe it's a catch-22!

LES Customizing objects missing

Folks,
I believe it has been posted before but whatever search I do, I cant find it.
We're on ECC 6.0 (upgrades done from 4.0b to 4.7 to 6.0). Customizing objects for TRM, Cross docking and some more are missing. Any suggestions to retrieve them?
thanks,
MZ

Cross docking in WM

Delta Replication for Customizing object from ECC- CRM

I need help on delta replication activate for customizing objects from ECC to CRM. I finished with initial load with product replication and everything worked weel. The problem is that product hierarchy continuely changing in ECC everyday, so the delta for the products error out due to incorrect product heirarchy in CRM becuase the delta is not working for DNL_CUST_PROD0, and DNL_CUST_PROD1. Please show me how to activate the delta for those DNL. What business transaction do I need for those so the delta will work for them too? Rewards points if helpful

I think you need to do Request downlaod for the Product Hirearchy when ever there is new one created in ECC.You can do request downlaod by creating the object using R3AR2. Exeute the object though R3AR4 and monitor the status using R3AR3.

How to enable Custom Objects in offine edition of CRM On Demand

Hi,
We need to enable Custom Objects in the offline edition of CRM On Demand so that Sales Reps can capture the additional information while they are in the field. I wanted to know how do we enable the Custom Objetcs in the offline edition.
Any pointers would be of big help.
Thanks,
Prashant

Hi, Offline edition doesnt support custom objects or any other object that is not available as part of the default offline solution. Hope it helps
-- Venky CRMIT

Bdoc Error: PRODUCT_SRV while download Customizing Objects from ECC to CRM

Hello,
we have tried to download Customizing Objects from ERP to CRM we getting Bdoc error PRODUCT_SRV
Please any help us in replicating customizing objects ECC6.0 to CRM7.0 Ehp1.
Bdoc Type:PRODUCT_SRV
Thanks,
adi

Adi,
Where do you get the erorr? If you're downloding PRODUCT_SRV, then this is not a customizing object. Please check for related inbound and outbound queues in CRM and ECC for errors. Please also check SMW01 and see if you have any BDoc's in error. Give us the full error text of any errors found.
If you get the problem with customzing objects, please let us the object name(s). Is it just one object or all customizing object?
Best regards,
Brian.

Delta load of customizing objects from R3 to CRM

I need to set up a delta load for customizing objects for ex: DNL_CUST_BNKA from R3 to CRM. Is there any documentation on this subject? Please advise. Thanks.

This is what I got from SAP
Bank Details information is a customizing object, and is not designed
for frequent changes, because there's no delta download for customizing
objects. If you create new Bank/change detail or delete an old one,
you have to perform initial load manually for DNL_CUST_BNKA again.
You can also do a request download of the replication object
'DNL_CUST_BNKA'to get some bank data added later on.
(Transaction \R3AR2 ).
You will need to do a request download of bank data from time to time
whenever you change the bank details. This is currently how it can be
done in SAP Standard.
If you change regularly bank master data:
The data has to be in sync between R/3 and CRM. If you make changes
often to the bank master data, you might consider scheduling a regular
job. See below for steps.
1. Transaction R3AS
2. Load Object = DNL_CUST_BNKA
Source Site = your R/3 system
Destination Site = your CRM system
3. Menu Goto > Variants > Save Variant
4. Enter a Variant Name and Description
5. Start Transaction SM36 to define a background job
6. Select the Job Wizard button:
In step Defining a Job Step, select ABAP program step
In step Define an ABAP Program Job Step, enter ABAP program name
SMOF_DOWNLOAD and the variant you created in step 4
7. Click on Job Wizard and follow the steps, choose ABAP Program
SMOF_DOWNLOAD and the variant you created in step 4
8. Select start time Immediately
9. Press Complete to finish
10.Choose Job Selection (SM37)
11.Enter the Job Name -> should have status finished
Schedule the job (SM36 > start condition) according to how often you
change your bank

SDIMA for Customizing Objects

Hi All,
We are on SAP CRM 5.0 with ECC 6.0.
We noticed customizing/configuration (entries missing in CRM) differences and want to address these inconsistencies between ECC & CRM environments using SDIMA. Coluld any one help on us how to proceed on this?
Kindly provide step by step procedure if we want to check all the customizing objects between ECC --> CRM.
Appreciate your valuble support.
Thanks,
Rahul.

Dear Rahul,
please see note 531217 Data Integrity Manager (DIMa) for help regarding an how to use transaction SDIMA.
regards, Gerhard

Sales order with reference to a custom object

Hi all experts, I have a question.
I want to create a sales order with reference to a complete custom object created in the CRM system. The custom object has a unique number assigned to it. How can I use the reference of this custom object in my sales order?
In other words, can I use a field in the sales order which will be storing this custom object number? If yes, which field can be used? If no, how else can this be achieved? Thanks in advance.

Animesh,
You have two options: Use the external reference number field on the Sales order if it is not be being used, however if you capture the customer's PO number you are probably aleady using that field. Otherwise I would do what you said and create a new Z-field via the EEWB and store your external reference number there.
If the custom object number was 10 digits alpha numeric, you could possibly create a custom partner function, but I really don't recommend it. The z-field will give you better performance for reporting, and future processing. I would put the z-field field in the CUSTOMER_H segment of the document.
Take care,
Stephen

How to download Delivering Plant of R/3 Customer Master in CRM BP

Hi,
We have successfully downloaded the Plants from ECC to CRM using the object DNL_PLANT which has successfully created BP's for PLants in CRM with BP Role=Plant and have updated the mapping in table CRMM_LOCMAP.
Now I want that the Delivering Plant mantained in ECC Customer Master Data (XD02 -> Sales Area Data -> Shipping Tab -> Delivering Plant Field) to be updated in the CRM Business Partners as BP Relationship.
The BP(Customer BP) should be updated as a BP Relationship "ZPLANT - Has Plant" with BP(BP of the Plant in CRM). This is not happening.
Can you please tell me the Steps to be performed in both CRM and ECC side to bring the ECC Delivering PLant as Relationship in CRM ?
Is the Delivering Plant change in ECC Customer Master Data does not gets captured in the BUPA_MAIN BDoc ?
When we change the Delivering Plant in ECC Customer Master Data, a BUPA_MAIN Bdoc gets triggered but when we look into the Bdoc we can not find the changed information of the Delivering Plant. I am not usre if this behaviour is right or not.
There is an OSS Note - 493947 which is quite old and talks about creating a Customer each for all the Plants in ECC and creating a Partner Function for Plant in the Customer Master Data. I am not sure if this process is still to be followed Or SAP has given some stadard settings to bring ECC Delivering Plant mantained in Customer Master to CRM.

To my knowledge oss note 493947 is still relevant
Edited by: Anders Brock-Faber on Apr 6, 2009 1:06 PM

How can i add an custom attribute and assign it to an existing custom object class in sun ds

I need to add an attribute to sun ds schema and assign it to an existing custom object class.
I know how to add an attribute but how can i add the attribute to an existing custom object class.
Please help.
Thanks

The objectclasses attribute is multi-valued, so you can add several values to it as long as they are unique.
For instance, I think you can add several declaration of the same objectclass as below (note the difference is the number of spaces in the value) howewer, from a schema perspective, only 1 will be taken into account:
objectclasses: ( 2.5.6.6 NAME 'person' DESC 'Standard LDAP objectclass' SUP top MUST ( sn $ cn ) MAY ( description $ seeAlso $ telephoneNumber $ userPassword $ CustomAttr) X-ORIGIN 'RFC 2256' )
objectclasses: ( 2.5.6.6 NAME 'person' DESC 'Standard LDAP objectclass' SUP top MUST ( sn $ cn ) MAY ( description $ seeAlso $ telephoneNumber $ userPassword $ CustomAttr) X-ORIGIN 'RFC 2256 ' )
That's the reason why it is safe to delete previous value if you want to update an existing objectclass. No problem to add a new objectclass (new oid and new name) to the schema.
-Sylvain

Data import/update on Custom Objects

Hi,
We are using the Custom Object1 for capturing site data within an opportunity. Since the custom object does not have capability to check for duplicates, the users have now entered data into this object which have lot of duplicates and also the data quality and integrity is lost. I am trying to see if there is an option to export this data and reimport them back after cleansing the data.
I then realised while importing custom objects, the only available option is to use external id.All the site that have been entered by the users do not have any external unique id. Also there is no option to do a mass delete records within the custom object1.
I understand that the only option to cleanse and reimport them back into ondemand is using web services. I want to use web services as last option.
Is there any other option to reimport them back into ondemand using the import utility after cleansing the data.
I would like to know what is the best practice while using custom objects. Is it advisable to populate a default value in the external unique id for custom objects while creating new records. If i had populated some value in the external unique ids while creating those records, i would have had the option to update the existing records. Now i don't even that option.
I am looking for some suggestions for this issue.
Thanks
Swami

Bobb,
I exported the data and mapped the row id to the external unique id. Like i said before, the external id is blank in crm ondemand when it is created. We did not have any default value specified for the external unique id.
When i tried to import with overwrite option, it does not find a match.
I get the following error message as i expected.
Row Id: AEMA-EYGFE     No matching record has been found. The import process will ignore this record.
Row Id: AEMA-F8CPC     No matching record has been found. The import process will ignore this record.
Row Id: AEMA-12CLIA     No matching record has been found. The import process will ignore this record.
Unless i do a web service update of External Unique ID in crm ondemand, the import option will not work.
Thanks
Swami

Difference in DNL (Customizing) objects in CRM 7.0 and CRM 5.0

Similar Messages

Maybe you are looking for