Difference in Hierarchy node data

hi experts,
i have an issue related to the data display in a query. I had executed a query which displays the data on the basis of Hierarchy of Cost center. in total of Hierarchy ie, the at the root node of the hier. the data is coming 3000k against a GL Account where as when i expend that node there is only one cost center exists that has some different figure against the same GL account 5000K.
Next day the figures were rectified by itsellf
the query is developed on MP & it includes the cube of actual data in which data is extracted on hourly basis. also cube has aggregates.
i wonder why this is happening?? can anyone advice the suggestion??
do i need to work on aggregates also? is it possible that aggregates become corrupt?? if so, then how can they be rectified??
thanks in advance
Neha

Hi Neha.
Some thoughts:
Maybe for the hierarchy you are suppressing the "nodesnotconnected", which is the residual node where all the costcenters that are not explicitly assigned to the hierarchy are placed. In this case, I think the total on the hierarchy root will also include the postings from the nodesnotconnected, but because you are suppressing it you cannot see the "missing" 2000 anywhere.
So, let's assume that the 2000 where posted to a costcenter that for some reason is not assigned to the hierarchy. The next day, someone realised that it was posted to the wrong costcenter, reverses the posting and puts the 2000 on the correct costcenter, which is in fact assigned to the hierarchy. Now you load the data, and voila, the numbers match.
Something like this maybe?
Regards
Jacob

Similar Messages

Difference between hierarchy node and single value

Hi experts,
Can anyone explain me the difference between hierarchy node and single value?
This is my problem:
I have a query that uses a characteristic (0ORGUNIT) with a hierarchy and I execute it without any problem but when I try to set a fliter on this characteristic and I try to find a single value, for example 101, it doesn't appear in the single value list, instead it appears in the hierarchy nodes list in the selection window.
I think I'm confused about both terms because I thought a hierarchy node was always the one who has one or more values as its lower levels like this:
A. 10
    A1. 100
    A2. 101
    A3. 102
         A3.1. 1021
B. 11
I this case I thought , for example, 101 was a single value but not a hierarchy node so I must find it in the single values list in the selection window, however, 102 can be both and must appear in both lists, is it true?
Thanks in advanced

In BW, hierarchy node with more information compare to the single value. for example, it always carries its father node information, which it belongs to. and some time information if it is time-dependent.
So, when you using hierarchy node, it means at least 2 information: value and "position" (who is its father node)
That's the reason why you see the hierarchy tree when choosing the node.
If you want to expand the hierarchy to the certain level, you can setting in the property. Another choice is restrict in the query designer.

How to filter hierarchy node in BEX query designer

Dear experts
We are working on FI balance sheet with hierarchy infoobject 0GLACCEXT. Example of our balance sheet is as follow:
Parent Node A = 20
     Sub-parent Node A1 = 10
         Leaf A11 = 5
             Leaf A12 = 5
Parent Node B = 20
     Sub-parent Node B1 = 10
               Leaf B11 = 5
               Leaf B12 = 5
We require only:
    Sub-parent Node A1 = 10
    Leaf B12 = 5
So I filter those out in BEX restriction; however, after we examine the report in tcode RSRT, "Sub-parent Node A1" is not shown in BEX Report, and the result is as follow：
Parent Node B = 5
     Sub-parent Node B1 = 5
             Leaf B12 = 5
Are there solutions for us to show merely A1 and B12 ?

Hi Chu
Try the following steps.
Initial Output
In this example I will restrict the query for only displaying Node 8603 and leaf 9000
Proceed to restrict the Characteristic. Please be aware of the difference between hierarchy nodes and leaf characteristic values. Also set the Hierarchy display properties to expand up to level 1.
Execute the query again:
Please be aware that users will still be able to expand node 8603 and see the lower level nodes/leaf. In order to restrict users from doing this set up users authorizations.
Regards,
Carlos

Hierarchy node Variable: F4 Help - Not showing Master data values

Hi,
We're having some problems trying to display the F4 help of a hierarchy node selection variable, to show the master data values so that it would look more complete for the users during report execution.
In the RSD1 setting for the info object, under 'Business Explorer' tab, the 'Query Execution Filter Val. Selectn' is set to 'Only Posted Values for Navigation'.
I thot that we could overwrite this setting at the Query Designer level, but it does not seem to work.
Even tho in the Query Designer, we have already specified the 'Filter Value Selection During Query Execution' to 'Values in Master Data Table', it does not seem to display the master data values.
There is no difference in the F4 values being displayed for the hier node variable, before and after the change in Query Designer.
Could anyone share some tips on other possible solutions to get a hier node selection variable's F4 help to show the master data values, without changing the RSD1 setting at the info object level please ?
Thanks in advance for your help.
Regards,
Femmie.

Hi,
Could you please share the steps you have taken to fix the problem?
We do have a similar problem and for some reason the newly added hierarchy node for 0Profit_ctr is not showing up in the variable selection screen F4 (input selection for query execution). However we can see this node when we display that hierarchy in RSA1. I did try applying the changes recommened by Jerome but unfortunately it didn't work.
Any help on this would be greatly appreciated.
Thanks,
Krish

DSO or ODS "Insert New Hierarchy Nodes" under Data Fields

When you insert info objects under the Data Fields in DSO right mouse click on the Data Fields icon and you will find Insert New Hierarchy Nodes . I created a hierarchy node with infoobjects associating with it which will be visible under the Filters Folder in BEx Query designer as a seperate folder. I can add them to the infoobjects from this folder into the query. I did not know how to apply this functionality in Queries and what it really does. My guess was you can create dynamic hierarchy using characteristic infoobjects from transactional data.Any ideas or links to documentation. This option was available from 7.X in DSO's and i think even in 3.x ODS.

Hi,
May help you:----
http://help.sap.com/saphelp_nw70/helpdata/en/4a/e71f39488fee0ce10000000a114084/content.htm
You could feel the flexibility of using this hierarchial display in the Query. Try to create any Query on this DSO.
Regards,
Suman

Data slice inconsistency problem with hierarchy nodes

Hi Experts,
We want to lock planning tables from function. We create the appropriate data slices but there are problems with (material group) hierarchy nodes.
If I give the node as input variable to the function it causes inconsistency in the data slice. If I choose and add this node to the lock in modeler, the problem is the same.
We are using the following variables to create a data slice:
0VERSION
0VTYTYPE
0COMP_CODE
ZGRMAT (developed material group)
Z_YEARCR (developed yera created)
The problem also exist if I set an another type of node e.g. destination country (0RECIPCNTRY) instead of material group.
For me, the problem seems to be generic.
Do you have any idea?
Many thanks in advance
Peter

There is a note related to this proble:
Note 1070608 - Lowflag field is not valid
The implementation of this note resolves the problem.
Peter

Hierarchy node variable - successor node data not displayed

Hello,
I have a query with a hierarchy in the rows section. This hierarchy is restricted by a hierarchy node variable with the following settings: variable type hierarchy node; customer exit; single value; mandatory; not ready for input; cannot be changed in query navigation.
The customer exit correctly supplies the node. However, only data for THIS node is displayed in the query results. And data for successor/underlying nodes is NOT displayed.
I tried several things, including:
- rightclick Rows > Display as a Hierarchy
- customer exit variable: multiple values instead of single value; optional instead of mandatory
In the Hierarchy Attributes for the hierarchy, nothing is checkmarked, except for Root/Totals Item Appears Above and Drilldown start level = 00. The hierarchy and its nodes are valid from 01.07.2005 to 31.12.9999.
I have a feeling in what area the solution can be found, but I have no clue what to do further on with it. As a test I replaced the customer exit variable with a user entry variable. If I then execute the query, I can select either the node or the value (both with the same technical value!). If I select the node, I get all data, including data for successor nodes. If I select the value, I only get the data for the node, not the underlying successor nodes. For some reason, the customer exit variable behaves like the latter and not like the first. I do not know how to solve this.
I would greatly appreciate if you could help me out of this issue here.
Kind regards,
Frank

Hi,
no, it doesn't. It just returns the data for the node and not for the underlying nodes.
Frank

Master Data load does not extract Hierarchy nodes in BPC Dimension ACCOUNT

Hi Experts,
I am performing master data load through standard DM package with Filter selection as:
1. Chart of Accounts
2. Hieararchy selection has 4 hierarchy names
3. Selected Import Text nodes
4. Selected Set Filters by Attribute OR Hierarchies
I have run this DM package for a set of data and selections a week ago and it worked fine.
However when i run it now, it is giving issues,
It extracts any new GL maintained in the BI system however it does not extract any hierarchy nodes at all! (Have tested this by deleting the hierarchy nodes and tried to run the master data load)
I am running the DM package in Update and have selection as External.
Any sugestions for checks / has anyone encountered this issue earlier?
Regards,
Shweta Salpe

Hi Guyz,
Thanks.
I found that the issue was with the transformation file where i was maintaining the RATETYPE.
When i removed the mapping of RATETYPE this works fine. (Pulls the nodes of hierarchies)
however now i do not have Ratetype populated in the system.
my rate type mapping is:
RATETYPE=*IF(ID(1:1)=*STR(C) then *STR(TOSKIP);ID(1:1)=*STR(H) then *STR(TOSKIP);ID)
and in conversion file i have TOSKIP *skip
I have to skip the ratetypes for the hierarchy nodes and my hierarchy nodes start with C and H.
So now that i have removed the mapping for RATETYPE can anyone suggest me a correct way to achieve this? (Note the above mapping formula was skipping all of the hierarchy nodes starting with C and H)
Regards,
Shweta Salpe

Select key date of time-dependent hierarchy before select a hierarchy node

Hello experts!
I have a Web Application which has a selection on 0ORGUNIT (organizational unit). The selection is on hierarchy nodes and the hierarchy is time-dependent.
Because of the time-dependency I have to give a key date for the hierarchy. But I want to select the key date at runtime/execution of the query and additionally I want to select the hierarchy node and other selection criterias.
Maybe there is a solution to get all this in one pop-up or maybe in two or another solution how I can implement this requirement.
Thanks for help!
Peter

Hey!
You don't have to use the same presentation-hierarchy like the selection-hierarchy is which you use for the variable. While presentation-hierarchy always has a key-date, the selection-hierarchy has none. So you see all values for selection but just this which are valid for the presentation-hierarchy are selected. And there is a warning which you can supress over RSRT.
This solution works for our problem, maybe not for yours, don't know.
Best regards,
Peter

No applicable data : when selecting hierarchy node on 0GLACCEXT

Hi,
I using the ZCUBE (Copy of virtual cube 0FIGL_V10).
I have data for the 0GLACCEXT hierarchy (standard hierarchy tech name: INT, and also for custom hierarchies)
From the moment we use a selection in the rows on a node within the hierarchy of the financial statement item : 0GLACCEXT, the result is No applicable data.
We are using the standard calculated key figure Balance sheet Value.
If i use the hierarchy (for INT) as a whole, we get data. If i restrict with hierarchy nodes for INT, then 'No Applicable Data'.
for the other custom hierarchies, i'm getting same result, i.e. 'No Applicable Data'.
Can somebody help with this issue.
Thanks,
V

Hi
Find out whethere data exists actually for the nade by executing the data for all the hierarchy nodes and find out whether data is coming when you execute for some other nodes
Regards
N Ganesh

Issue with hierarchy node variable and multiple SAP hierarchies

Hello experts,
We are currently facing an issue when using two SAP hierarchies in Web Intelligence and one of them is restricted with a hierarchy node variable.
The systems we use are a SAP BI 7.01 (SPS 05) and a Business Objects Enterprise XI R3.1 SP2 (fix pack 2.3). I want also to point out that the fix pack 2.3 has been applied to all BOE related components: the SAP integration Kit, client tools, and enterprise (server and client).
The universe used in our scenario is based on a BEX Query with two hierarchies (non-time dependent hierarchies, intervals allowed) loaded on their corresponding characteristics. One of these characteristics is restricted with a hierarchy node variable (manual input, optional, ready for input, multiple single values allowed).
Prerequisites for replicating the problem:
1) When building the web intelligence query select several levels from both hierarchies (they have seven levels each) and the only amount of the InfoCube that the BEX query (that was used to create our universe) relies on.
2) In the hierarchy node variable prompt select a hierarchy node entry (not an actual InfoObject value that exists as transactional data in the InfoCube )
By executing the query built above, all characteristics are returned null (no value) and the key figure with value u201C0u201D. No error messages, no partial results warnings. Now if we go back to u201CEdit queryu201D and select levels of only one of any of the two hierarchies the query runs normally (by selecting the exact same value for the hierarchy node variable prompt).
Any ideas on the matter?
Regards,
Giorgos

Hi,
Have you ever got a solution for this problem?
I have a similar one.
Thanks,
regards, Heike

How to view the key mapping when viewing Hierarchy in Data Manager

Hi! I previously posted a question on doing value mapping using the hierarchy code rather than the name. I have got that working now using concept of remote key. When I first loaded the hierarchy with remote key and check in Data Manager, I can see the hierarchy structure with the key mappings. However, when I subsequently went back to the hierarchy to have a second look, the keys are gone. Does anyone know how I can view hierarchy in Data Manager with the key mappings?
Cheers!
SF

Hi,
Go to Record mode, and open Hierarchy table. Now to select click on any hierarchy node record and then right click and select "Edit Key Mappings". This will show you existing keys as well as allow you to manually modify keys. You can only Check Remote keys on hierarchy in Record mode and in Hierarchy Mode "Edit Key Mappings" option will be disabled.
Please revert if you face any issue.
Regards,
Shiv

Lack of texts in hierarchy nodes and leafs for 0ORGUNIT

Hello experts!
We have the BCT hierarchy 0ORGUNIT in BW exporting his time-dependent structure from R/3. Now, for some leafes and some nodes above the leaf we have no texts just see the key.
Has someone an idea what the problem could be? In R/3 we have the text and in master data of 0ORGUNIT we also have the text within the right time period...
Thanks for help!
Best reagards,
Peter

I'm not sure I understand what you are suggesting. Here is the data we have:
Hierarchy             Key Figure
- CC 0001 (node)      30.56
CC 0001 (leaf)          6.45
- CC 0002 (node)       24.11
       CC 0002 (leaf)     6.45
       CC 0003 (leaf)     5.72
       CC 0004 (leaf)     7.47
       CC 0005 (leaf)     4.47
We want the value 6.45 to show up next to the CC 0002 hierarchy node, since that is the value for that cc. And we want the 6.45 to show up against the cc 0001 node rather than adding everything beneath it. What you suggested below - is that a display option in the query, or where do I do it?
Thanks.

Hierarchy Node Intial load from R/3 to CRM 5.2

Hi
I have this problem when download form R/3 4.6c to CRM 5.2 hierarchy node.
Can you help me?
It's very important because we are blocked.
Thanks
Best regards.
we downloaded the following customer hierarchy:
0002189004
- 0002199004
- 0002190509
- 0002010050
using the object DNL_BUPA_KNVH.
In this way the table CRM_KNVH_TEMP has been filled correctly with all
the structure.
We executed the BPH_DNL transaction selecting only the hierarchy type
D,
and the sales org D468, distr chann 01 , divsion 99.
After saving the hierarchy we created all the hierarchy structure in
CRM but there are not any customers linked to the related hierachy node.In particular we found the followng situation:
table BUT_HIER_NODE, filled with all the hierarchy node
table BUT_HIER_NODE_D fille with all the descrption of the hiarachy
node in english language
table BUT_HIER_STRUCT filled with the structure and the link between
node
tables BUT_HIER_TREE,. BUT_HIER_TREE_d filled with all our hiearcy type
table BUT_HIER_NODE_BP empty
also:
the method "assign_bp_to_node" is only executed in the the private
method
"change_record" but it is commented in the method "create record" and
also
"build_crm_tree".
In conclusion the method "start_initial_down_load2 (executed int the
function CRM_BUHI_INITIAL_DOWNLOAD) call the method 2build_crm_tree2,
but this method never execute "assign_bp_to_node".

I have found a propoer articulation of my problem in SAP note 429423. It goes as follows:
<i>"No entry exists in one of the queues, but the status in R3AM1 remains 'Running':
In this case, probably no reply is sent to the CRM Server after the data selection in the source system.If this is the case for an adapter object but not for others, contact the respective application component which can analyze why the source system does not send a reply and correct it.
If this system response occurs for all adapter objects, create a message for component CRM-MW-ADP."</i>
However, I am unable to act on the above. Kindly suggest what exactly needs to be done as suggested in the note.

Search Help for Hierarchy Node in SAP BW 7.3

Hi Experts,
We were previously using SAP BW 7.1 system and we had a table which used to be maintained through SM30 which has a customed search help on one of the fields for a hierarchy object. And it was working perfectly.
However, one of our systems have just been migrated into 7.3 version and the above functionality is no longer working.
This is what is happening now:
- User selects a hierarchy and after selection nothing is being displayed on field on the table.
We have tried to debug this customed search help in both environments to distinguish what is wrong. We have noted that a standard function module (RRSV_IOBJ_VALUE_OUTPUT) is not behaving similarly. In 7.1 system, the C_T_DATA table is being filled whereby in the 7.3 system, it is empty.
Do you think this is the issue?
Please do advise and propose what can be done to make it work. Or any idea on how to create a new search help for a hierarchy node in 7.3?
Thanks in advance.

hi,
one more thing i will like to add here is in BW 7.3 you get a new security admin feature that allows you to make mass changes to authorizations instead of one-by-one. This can be done by cut-and-paste in a worklist, hierarchy nodes, and you can also add users to multiple analysis authorizations.
The u2018newu2019 authorizations has both the data value and hierarchy restrictions. You can still build using the u201CRSECADMINu201D transaction
Also make sure that all objects are in the TLIBG library and they will be 'shielded' during the upgrade.
regards
laksh

Difference in Hierarchy node data

Similar Messages

Maybe you are looking for