Difference in libclntsh.a of /lib and /lib32

I have Oracle 9i installed on AIX5.2.
I compile some .pc files using pro*c linking with libclntsh.a of ORACLE_HOME/lib
Later I comile, assemble, link and create a single executable with linkages to libclntsh.a of /lib32
I am coming across a few problems while executing the executable as
0509-130 Symbol resolution failed for ./libclntsh.a(shr.o) because:
0509-136 Symbol pw_post (number 260) is not exported from
dependent module /unix.
0509-136 Symbol pw_wait (number 261) is not exported from
dependent module /unix.
0509-136 Symbol pw_config (number 262) is not exported from
dependent module /unix.
0509-136 Symbol aix_ora_pw_version3_required (number 263) is not exported from
dependent module /unix.
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
I want to know, whether there is any difference between the libclntsh.a file of ORACLE_HOME/lib and ORACLE_HOMe/lib32
Regards
Jayashree Nair
P.S. :Already have a post with the error messages as shown above, However there being no response, went ahead and did some R&D, and found this descrepency.

Hi,
Looks like something to do with Post/Wait kernel extension, run rootpre.sh.
I had the same issue and it got resolved when I have run rootpre.sh on AIX 5.3.
thanks
srinivas

Similar Messages

[SOLVED] lib32-libgpg-error and lib32-libgcrypt no longer working

The Dell 1320c printer requires a workaround of using it with a FujiXerox DocuPrint C525a driver, which only exists for 32bit systems. In order to get it running, you need to manually copy the files to the proper locations. With the new upgrade on both of those packages (lib32-libgpg-error and lib32-libgcrypt) the filter file /usr/lib/cups/filters/FXM_PF no longer runs, and complains about "wrong ELFCLASS64", which I take it to mean it's not recognizing/finding the lib32 packages. I've since downgraded and added the packages to the IgnorePkg array in pacman.conf, but I wanted to point it out to anyone who may have the same issue, or in case it was an error with the generation of the packages. Or is there simply a dependency that hasn't yet been updated?
*EDIT* Thanks to Wonder for fixing it (or letting us know it was fixed)!
Last edited by lswest (2010-06-02 20:14:43)

Kirurgs wrote:Exactly the same error with Lotus Notes. Dowgrading package solves the problem.
New packages are couple of bytes in size, which is waaaay smaller than previous versions.
Smart thinking, I didn't think to check the size of the packages. Same thing here, lib32-libgcrypt is 4Kb vs 240Kb (working package), and lib32-libgpg-error is 4Kb vs 8Kb (working package). For the lib32-libgpg-error it might be due to the new compression format, but I doubt that. I doubt very much that .xz compression can result in a change of 1/60th the original size for lib32-libgcrypt.
Last edited by lswest (2010-06-02 15:30:55)

Problems with libclntsh.so.10.1 and PHP/Apache HTTPD

Hello,
I've been wrestling with the install of Instant Client/OCI8 with PHP 5.0.4 and Apache HTTPD 2.0.52 on RHEL4 ES. Most recently I've followed the instructions detailed here: http://www.oracle.com/technology/pub/notes/technote_php_instant.html
Apache is installed from the RHN rpm.
PHP was successfully compiled with the following parameters:
./configure with-mysql with-ssl with-ldap with-apxs2 with-dom with-oci8-instant-client=/usr/local/oracle/instantclient_10_2 --enable-sigchild
I've also attempted to get OCI8 working using the full Administration Client from CD. In either case, I can compile/install PHP just fine. I've indexed the Instant Client directory with ldconfig, and the user that runs HTTPD has read/execute permissions on libclntsh.so.10.1 and on all the directories above it. Nonetheless, when I start Apache, I invariably run into the following error:
# /etc/init.d/httpd start
Starting httpd: Syntax error on line 190 of /etc/httpd/conf/httpd.conf:
Cannot load /usr/lib/httpd/modules/libphp5.so into server: libclntsh.so.10.1: failed to map segment from shared object: Permission denied [FAILED]
Thanks in advance for any insight,
Patrick
Message was edited by:
dog.breath

I have a similar problem:
Syntax error on line 202 of /etc/httpd/conf/httpd.conf:
Cannot load /usr/lib/httpd/modules/libphp5.so into server: libclntsh.so.10.1: cannot open shared object file: No such file or directory
Using the following succesfull configuraion
PHP Version => 5.0.4
System => Linux 2.6.9-1.667smp #1 SMP Tue Nov 2 14:59:52 EST 2004 i686
Build Date => Aug 26 2005 11:23:17
Configure Command => './configure' '--enable-force-cgi-redirect' '--enable-ftp' '--with-dbase' '--with-regex=system' '--with-gd' '--with-bz2' '--with-config-file-path=/etc/httpd/conf/httpd.conf' '--with-zlib' '--with-oci8=/home/oracle/product/10.1.0/Db_1' '--enable-sigchild' '--with-dom-xslt=/usr/lib/libxslt.so.1.1.11' '--with-png' '--with-apxs2'
Server API => Command Line Interface
Virtual Directory Support => disabled
Configuration File (php.ini) Path => /etc/httpd/conf/httpd.conf
Everything is visible to all users the LD Library path is set even in the httpd.conf file.
Clear PHP works from within the command line, now I want to get it working via Apache2.
If anybody has a clue I would be most obliged.
Also disabling SELinux did not do the trick.

Clash between nvidia-utils and lib32-nvidia-utils

I'm getting a clash between nvidia-utils and lib32-nvidia-utils when upgrading. The error is:
/usr/lib/libnvcuvid.so exists in both 'nvidia-utils' and 'lib32-nvidia-utils'
/usr/lib/libnvcuvid.so.1 exists in both 'nvidia-utils' and 'lib32-nvidia-utils'
/usr/lib/libnvcuvid.so.260.19.29 exists in both 'nvidia-utils' and 'lib32-nvidia-utils'
Anyone else getting this problem?

No, I've been upgrading daily. I've experienced this sort of error before, but the clash has always been with existing files (usually after not upgrading for a while), not between two packages. Uninstalling, -Syu and reinstall didn't work, I still get the error. I had a look at the .pkg.tar.gz, and it really does contain those files, so it looks like a packaging error.

Difference between cleared items,open items and all postings (FI).

Hi experts,
Can anybody tell me the difference between cleared items,open items and all postings for an account.
While running corresponding bapis and transaction FAGLL03 (for GL) or FBL1N (for accounts payable) i found that in some cases all postings is less than cleared items or open items for a time period. How could it happen.According to my knowledge all postings should contain cleared items and open items.
Please correct me..
Thanks and Regards
Arjun

Hi Arjun,
For every Billing Documnet created(VBRK/VBRP-VBELN) there will be an accounting document created in BSID/BSAD tables.
OPEN ITEMS means the Billed/Invoice Amounts that are pending from Customers, i.e which we have to receive from Customers.
CLOSED ITEMS means the AMOUNTS received from that customer.
OPEN ITEMS : fetch data from BSID table Only
CLOSED ITEMS : fetch data from BSAD only.
ALL POSTINGS : fetch data from both BSID and BSAD.
Hope this will help.
Regards,
Nitin.

The Difference between iphone Unlock T-Mobile and iphone Unlock Free-Sim

As mentiond in the title my questions are:-
- What is the Difference between iphone Unlock T-Mobile and iphone Unlock Free-Sim?!
- Did they both work Internationally?!
- For the Unlock T-Mobile should i use their sim or i can use any sim directly?!
Thanks

Unlocked means unlocked and you can use any sim card and keep changing them and the phone will never lock if it is unlocked.
Sim free, means that the phone is sold at full price without a sim card, but the phone will lock to the first sim card that you put in it. A sim free phone will work internationally, but you will have to use a roaming plan with your phone company because the phone will be locked, so you CANNOT change it to a local sim card.
If you have an unlocked phone, you can use it internationally by inserting a local sim card and the phone should then work and you won't have to pay increased roaming charges as you would with a locked phone.
If you buy a T-Mobile phone that is unlocked, DO NOT activate it with their sim card or the phone will lock to T-Mobile and you will have to approach them to get it unlocked. Use it with another sim card straight away and it will remain unlocked.

The Difference between Extending a Wireless network and WDS?

I have an Extreme (n) and an Express (n).
I want to make sure the signal is strong upstairs and share a printer (connected to the express) and use AirTunes. I also may add an external drive to the Extreme.
What's the difference between Extending a Wireless Network and using WDS? Will there be a speed difference?
Message was edited by: J. Christopher Edwards

I think you don't get it
If I have another draft N router that operates at 2.4G and I have only n devices I can still use WDS and it will connect using draft n in the 2.4G band.
If one g device connects to the network will go in mixed mode.
The AEBS will still report 130 Mbps for your n clients and 54 for your g clients.
If the other router is g only obviously you can't connect between the two router at n mode but still the AEBS will be in mixed mode and not in g. The Extreme will still report 130 Mbps for the connected n clients.
I can tell you that because I have actually implemented it am not taking off the documentation.
The same device if I try to use the "extend n network" does not even see the AEBS but will happily keep the n in the WDS mode and though the bandwidth is halved it is still more than g.
In any case enough for this!

Difference between SY-SUBRC EQ 0 and SY-SUBRC EQ ' 0 '

Dear All,
I am not from abap background.
I have a simple question.
what is the difference between sy-subrc eq 0 and sy-subrc eq '0'
How does it impact a statement like this for example
SELECT /BIC/ZAGENT /BIC/ZBATCH_MO /BIC/ZDOC_NUM /BIC/ZCUSTOMER
           /BIC/ZSTORE /BIC/ZLINE_NUM /BIC/ZMATERIAL /BIC/ZBARCODE
      FROM /BIC/AZO_AMVN100
      INTO CORRESPONDING FIELDS OF TABLE it_aquisition
      WHERE /BIC/ZAGENT EQ SOURCE_FIELDS-/BIC/ZAGENT
      AND /BIC/ZDOC_NUM EQ SOURCE_FIELDS-/BIC/ZDOC_NUM
      AND /BIC/ZOCFLAG = '1'.
    if sy-subrc EQ '0'.
      SELECT SINGLE /BIC/ZDOC_NUM FROM /BIC/AZO_PMVN300
        INTO v_docnum
        WHERE /BIC/ZDOC_NUM EQ SOURCE_FIELDS-/BIC/ZDOC_NUM
        AND /BIC/ZAGENT EQ SOURCE_FIELDS-/BIC/ZAGENT
kindly help me with this.
Pleae do a little more research before posting questions here...even if you are new to ABAP.
Edited by: kishan P on Aug 24, 2010 10:00 AM

Hi,
Please refer [Wiki post|http://wiki.sdn.sap.com/wiki/display/ABAP/Sy-Subrc].
hope it help you,
regards,

Getting Big Headache, What is difference between Flash Lite 3.1 and Flash Player 7

Hello, I am asking questions about the two similar yet different programs for Pocket PC version only:
1) Which came first, Flash Lite 3.1 or Flash Player 7?
2) If I have both in my Pocket PC, will there be product incompatibility?
3) What is the difference between Flash Lite 3.1 and Flash Player 7.
4) I have a Flash Lite 3.1 but uninstall information says "Flash Lite 3.1 for Opera Mobile", did you releaase this? Is this an illegal copy? A developer's copy?
*I don't know exactly where I got it, but I got it from the HTC developer's forum: XDA-developers.com
*I also use Opera mobile, a web browser for Pocket PC's.
5) What is difference between Flash Lite 3.1 and Flash Lite 3.1 for Opera? Is the only difference is that Flash Lite Supports everything flash related, while Flash Lite Opera supports only flash in opera?
Hi, I don't expect all answers, but I hope someone or someone from adobe support can clear some things up for me.

The program under my "remove programs" list is specifically called "Adobe Flash Lite for Opera". The XDA forums people said along time ago that it was Flash Lite, and kept calling it Flash Lite, and not Flash Player 7.
Now what about this:
http://www.adobe.com/products/flashlite/version/
The table shows the differences between FP 7 SDK, FL 2.1, and FL 3.1. And it's quite obvious that FL 3.1 has way more features than Flash Player 7. What does SDK mean? And why are you telling me FP 7 has more features?
With this information, can you or anyone else provide any more details and clarification?

What's the difference between a not-initialed object and a null object

hi guys, i wanna know the difference between a not-initialed object and a null object.
for eg.
Car c1;
Car c2 = null;after the 2 lines , 2 Car obj-referance have been created, but no Car obj.
1.so c2 is not refering to any object, so where do we put the null?in the heap?
2.as no c2 is not refering to any object, what's the difference between c2 and c1?
3.and where we store the difference-information?in the heap?

For local variables you can't have "Car c1;" the compiler will complain.That's not true. It will only complain if you try to use it without initializing it.
You can have (never used, so compiler doesn't care):
public void doSomething()
   Car c1;
   System.out.println("Hello");
}or you can have (definitely initialized, so doesn't have to be initialized where declared):
public void doSomething(boolean goldClubMember)
   Car c1;
   if (goldClubMember)
       c1 = new Car("Lexus");
   else
       c1 = new Car("Kia");
   System.out.println("You can rent a " + c1.getMake());
}

What is the difference between SAP NW PI7.1 and PI7.1 EHP1

We have a customer using SAP PI7.1 EHP1. The application to be deployed
isdeveloped on SAP Netweaver PI 7.1 SP06.
We need to know if application developed and transported from PI7.1 is
compatible with EHP1?
Below are the Components used by the application .
1) SSL communication using SOAP adapter
2) Java mapping , Graphical mapping , XSLT mapping
3) Customised EJB modules
4) Adapter framework
5) ALE layer for IDoc communication from ERP to PI
6) RFC lookups to PI system and ERP system.
Questions
1)Will PI EHP1 be able to communicate with PI7.1 using SOAP adapter ?
2) What is the difference between SAP NW PI7.1 and PI7.1 EHP1 ?
Regards,
Sneha

Hi,
EHP Pi7.1 new
IPv6 Support in SAP Systems (new)
Async/Sync and Sync/Async Bridge in the JMS Adapter (New)
High Availability (New) Locate the document in its SAP Library structure
Use
A new concept is available for setting up a high availability environment for SAP NetWeaver Process Integration (PI). To do this, you need SAP Web Dispatcher for load balancing, and you must reconfigure your HTTP, RFC, and RMI connections so that they can be used for load balancing. You must also make various configuration steps in other components of your PI environment.
[Level 4: Document: XML to Text Conversion Module (New)] XML to Text Conversion Module (New)
Message Packaging (New)
Monitoring Milestones (New) Locate the document in its SAP Library structure
Use
You can use the new scenario variant Monitoring Milestones of the Business Process Management scenario to define a monitoring process that can monitor events from different applications. A monitoring process can subscribe to events from SAP or non-SAP systems.
check given Link
http://help.sap.com/saphelp_nwpi711/helpdata/en/61/8c3842bb58f83ae10000000a1550b0/frameset.htm
Regards,
Amit

What is the difference between component(Y, Pb, Pr) and component(R,G,B)?

[I previously posted this question in another thread as hadn't realised how to post new question]
Q. What is the difference between component (Y, Pb, Pr) and component (R,G,B) ?
I’d previously thought I was reasonably savvy on all things HD, but when I turned my thoughts to looking into getting a mac mini to run part of my home cinema I realise I have some confusions around the above.
Here’s what I think I know:-
The mac mini has a DVI output of the type which can output both digital and analogue, and so via physical adapters it could be used to connect to displays that take HDMI or VGA style RGB leads.
I know on the market I can get a DVI to Component cable lead which would therefore lead me to assume it could drive my HD plasma with component input (Y,Pb,Pr), as I currently drive the HD TV via component cable with a SKY HD box (720p and 1080i), an xbox 360 (720p) and a progressive scan DVD player (480p), all through a Denon AV-amp.
The problem is, I’ve heard somewhere that the DVI to component is R,G,B only and that it is not Y, Pb, Pr which is making me wonder it a) this will work and b) if I really understand component video afterall.
I notice the Apple TV outputs Y,Pb,Pr but colours them red, green and blue, so am even more confused….
Hopefully someone can help educate me on this !

Thanks for this.
My Plasma is a Panasonic 42" Viera March 2005 model. No HDMI, No VGA.
It can process signals up to 720p and 1080i via the component (an interestingly it makes a huge difference over SD even though the native panel is 480..!?!)
Am I right in thinking that the iPod component cable will also be R,G,B and therefor might be a suitable trial? Ie. if the TV accepts the input from the iPod then it should work for the mini?
Only other thing of note is I'm doing all this via my Denon 1707 AV amp which does have the facility of upscaling, but I imagine it needs to stick to one format?
Thanks.

Difference between F.35 Receivables amount and FBL5N report open items

Hi All,
There is an amount difference between f.35 receivables amount and fbl5n open items amount, I have observed that there are some changes to credit master like risk category and credit representative group, so I thought if we run f.28 it will be right but still difference exits.
If anybody has come across similar issue or if you have any idea on this on how to analyze, please let me know.
Regards,
RK.

Hi ,
Please check the time horizon in credit check used. then compare it with FBL5n.
May be there will be difference in comparison period.
Program RFDKLI20 or F.28 is to run when there is changes in Assignment from company code, entry in customer master data, entry in sales area data, user exit., currency of credit control area , Assignment of customers to credit accounts.
And
Program RVKRED09.--> only the risk class was changed it is sufficient to run
Regards
Atul

Difference between sales order schedule line and item level data

Hi All,
Could you please let me know what is the difference between sales order schedule line and item level data?
Thanks,
Ramya

Hi Ramya,
Sales order schedule line contains del date, order qty, rounded qty, confirmed qty, delivery qty, schedule line category, purchase requisition etc., ie It contains the full details of sales order data with respect to the scheduled line of delivery. The total quantity of a sales order item can be subdivided into schedule lines that contain the various subsets with the corresponding delivering dates.
Sales order Item level data contains details of the item in the sales order like material code, net price, net value, UoM, PO details, reason for rejection if any, material group,billing date, plant etc., ie this
contains the full details of item irrespective of scheduled line.
Regards,
R. Senthil Mareeswaran.

What is the difference between Safari 5.1.7 and 5.1.10? I can not log on to my website, so that their customer service has said that they are using Safari 5.1.7, and I use 5.1.10 (which I have installed on my computer, Mac)

what is the difference between Safari 5.1.7 and 5.1.10?
I can not log on to my website, so that their customer service has said that they are using Safari 5.1.7, and I use 5.1.10 (which I have installed on my computer, Mac)

Might be the security fixes > Safari 5.1.10 for Snow Leopard

Difference in libclntsh.a of /lib and /lib32

Similar Messages

Maybe you are looking for