Difference in LOCL print preview for same script in two different systems
Hi All,
When I am testing a dunning letter ( Custom sapscript) in my testing system the LOCL print preview is correct...When I am testing it in my development system by taking print preview from LOCL it is not printing a uline and some line item headers...
There is one text element for printing line item header.
U1....ULINE(73)
T0 &vline& ....&T_MATNR&..
T3 &vline&
UL &ULINE(73)
IN Development sytame in print preview every thing is perfect except the above portion the first uline and vline are not getting printed and as a result next vline and uline are dispalyed a bit above .. I am unable to understand why one uline is not printed but the othe one is printed as we are using HELVE12 in both cases and above all why in test system this problem is not occuring..
I checked and am 100% sure there is no difference between the layout versions in the two sapscripts...Also checked most of the SPAD configs in two systems and found them same..
Can you give me any idead about the reason for the diffrence in print preview as in both cases it will consider the printer installed on the local desktop....
Just we use citrix metaframe to log in SAP but that should not be the reason as thne problem would be in both system..
Please help me out...
Thanks and Regards
Sweta
Hi ,
I already mentioned that I am selcting LOCL ( Device type Sapwin) in both cases so in both cases it is considering the printer installed on the local system...
Can anyone tell me specific spad config or anything else which I need to compare in both systems..
Similar Messages
-
Output from same script on two different platforms produce different outputs.
I'm running a command prompt script on two different platforms (Windows 7 desktop and a Microsoft Server 2008 R2 Enterprise platform) and the output the script produces is different on each platform.
Specifically; the script is
For /f "tokens=2-4 delims=/ " %%a in ('date /t') do (set mydate=%%c-%%a-%%b)
For /f "tokens=1-2 delims=/:" %%a in ('time /t') do (set mytime=%%a%%b)
echo %mydate%>> log.txt
echo %mytime%>> log.txt
and the output from the Windows 7 desktop is:
2014-07-31
0249 PM
While the output from the 2008 server is:
ECHO is on.
0249 PMHi Dave,
There's some very good learning resources here:
http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx
Also, there's a script repository full of examples you can learn from and tweak to meet your needs here:
http://gallery.technet.microsoft.com/scriptcenter
As an additional suggestion, I'd highly recommend upgrading PowerShell on Win7 and WS2008R2 to v4. v2 was okay, but v4 makes life much easier (make sure you read the system requirements first though, there's still a few incompatibilities):
http://www.microsoft.com/en-us/download/details.aspx?id=40855
Don't retire TechNet! -
(Don't give up yet - 12,950+ strong and growing) -
Can we generate two invoice for same product in two different currency
dear all gurus,
actually we are in export sales
so we are generating export invoice.
my client is asking for another invoice in INR too this is called comercila invoice
with this i ve to generate the ARE form
so how to do this three things
1.export invoice in foreign currency
2.commercial invoice in INR
3.ARE form with referance to this export sales
with regards
subratHi Subrat,
I really dont know how this scenario can be handled.
2invoices for the same order is not allowed legally also. So if the user is asking for it, may be first they need to discuss this with their legal department.
If they say ok, then you may think of only an output, where you can change the values with a standard exchange etc. But having 2invoices in the system of different currencies for a single sales order will lead to lot of problems in reporting.
Can somebody throw some light on this, on how to enable this without any problems. -
Query : Send same data to two different systems
Hi,
We are getting data from BI to PI through proxy. And using soap adapter we are sending the data to non sap system.
Now my query is : I want to send the data which came from BI to PI to two non sap (Prod and Quality) systems. How can we do that? Waiting for your help me on this.Hi,
You have to add 2 receivers in receiver determination (one for quality & one for prod).
After that, create 2 interface determinations separately one for each, also 2 receiver agreement & 2 receiver channels.
-Supriya. -
Convert OTF along with Print preview in SAP Script
Hello All,
I was getting a print Preview for the sap script, now with the new requirement, I had to capture otf data too in OPEN_FORM. so I have added "TDGETOTF = X", and that gives me otf data which I am converting it to PDF. now the problem is I am not getting preview anymore. my requirement is to have both, Preview and otf data. I have tired serching in forums and also used a function module SSFCOMP_PDF_PREVIEW, but no luck. what am I missing here. Please suggest.
Thanks-
TDPAGESLCT
TDCOPIES 1
TDDEST LOCL
TDPRINTER
TDPREVIEW X
TDNOPREV
TDNOPRINT
TDNEWID X
TDDATASET SAP11
TDSUFFIX1 LOCL
TDSUFFIX2 1000
TDIMMED
TDDELETE
TDLIFETIME 7
TDSCHEDULE
TDSENDDATE 00000000
TDSENDTIME 000000
TDTELELAND
TDTELENUM
TDTITLE
TDTEST
TDPROGRAM
TDSCRNPOS 000000000000000
TDCOVER D
TDCOVTITLE
TDRECEIVER ABCDEFGH
TDDIVISION
TDAUTORITY
TDARMOD
TDIEXIT
TDGETOTF X
TDFAXUSER
TDRDIDEV
TDNOARMCH
TDFINAL
RQPOSNAME
BCS_REQST
BCS_STATUSMaybe you can call the form twice - once with tdgetotf = 'X', the second time with it blank.
-
how do i fix my printer when it won't show the print preview for web pages? it worked for a while and now it doesn't. printer is an hp officejet 7310 all-in-one.
I would suspect this is a hardware issue. The rollers are probably having issues picking up the relatively smooth thick media. You might have better results be cleaning the paper pickup rollers with a damp paper towel. Also make sure the paper is snugly loaded and the paper guides have been correctly positioned.
Regards,
Bob Headrick, MS MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
I am unable to see print preview for my sales orders in VA03.
Hi All,
I am unable to see print preview for my sales orders in VA03.
When ever i am selecting an order and from
menu-> sales document-> issue output to
it is raising information message on my status bar no output
has been selected for printing.
How can i view may print preview for sales order other
than from va02/vao3.
Can we view preview of a sales order if there is no output type is mapped to
form. if yes can please give me the steps.
Thanking in advance.
Best Regards,
TRS GUPTAHi,
Go to NACE transaction , from there choose the V1 application,now click on Output types. now see the Output types for print related.
Now use them for your preview.
you need to provide Output type to view the preview
May be you are missing some configuration(in your case Order type may be Z* so it requires Some Config ).
Regards
vijay -
How to find print preview for purchase order like what we find in va03
hi guru's
how to find print preview for purchase order like what we find in va03
let me share ur information
thank uHi
You can see the Print Preview/printout etc using the Transaction ME9F for Purchase Order
Execute the ME9F tcode and execute you will get lot of PO's select any Po and press display message
you will see the print preview
Similarly for RFQ output use the Tcode ME9A
for Contrat use ME9K
for GR output use MB90
Reward points for useful Answers
Regards
Anji -
Hi,
I have an issue with viewing print preview for PO output.
In Messages,output type has been defined.
I am trying to display print preview of the PO outpit by clicking on the print preview button.
Instead of displaying the print preview on my screen,the printout is directly fired in the printer.Please note I am trying to display just the print preview and not printing the PO.
This happens even when I have not set 'Print immediately' indicator in Communication setting and have defined 'Send with application own transaction'.
Your input on this would be of great help,
Regards,
BikramHi,
Triggering print or Preview option is dependent on driver program assigned to output type in OMTB. It will be customized program. You need to do modification in your customized program. -
How to know print program for SAP Script
Hi friends,
how to know print program for SAP Script form name ?Hi ,
You can use the following code changes in the layout & see..
You have to create a program Z_BC460_EX4_HF for that..
/:PERFORM GET_NAME IN PROGRAM Z_BC460_EX4_HF
/: USING &CUST&
/: CHANGING &NAME&
/:ENDPERFORM.
Dear &NAME&
The ABAP routine could be defined as follows:
IMPORTANT: The structure itcsy must be used for the parameters.
REPORT Z_HENRIKF_SCRIPT_FORM .
tables scustom.
form get_name tables in_tab structure itcsy
out_tab structure itcsy.
read table in_tab index 1.
select single * from scustom
where id = in_tab-value.
if sy-subrc = 0.
read table out_tab index 1.
move scustom-name to out_tab-value.
modify out_tab index sy-tabix.
else.
read table out_tab index 1.
move 'No name' to out_tab-value.
modify out_tab index sy-tabix.
endif.
You could also fill the ouput parameter table this way
READ TABLE out_par WITH KEY 'NAME1'.
out_par-value = l_name1.
MODIFY out_par INDEX sy-tabix.
endform. -
How to configure print preview for a customised RFQ document type.
Hi All,
I can see RFQ print preview for a standard RFQ type AN .But while I want to see RFQ print preview in customised RFQ type ,I am not able to see .Kindly let me know where I have to maintain it in customisation.
Regards
Abhijit DasHi,
Confirm the following settings;
SPRO > MM > Purchasing > Messages > Output Control > Message Types > Define Message Types for Request for Quotation > Fine-Tuned Control: Request for Quotation > Here maintain the Customized RFQ Output Type with Operation "1" i.e. New
And then maintain the Customized RFQ Output Type in the RFQ Procedure "RMBEA1"
And then maintain the condition record in MN01 for the Customized RFQ Output Type and then check it in ME41. -
Where can i see the final print preview for a rfq document./ ??
Hello,
where can i see the final print preview for a rfq document./ ??check the output type of that RFQ.
and check in ME9a.
Regards
Prabhu -
Same script against two applications, two diff results
Hi All,
One calculation script against XXX application it is not giving expected,not giving any result, but I created another application “Testapp” and run the same calc script against “Testapp” application it is giving the expected result. Both applications are same members, properties everything. I didn’t understand the issue. Any ideas please.
Regards,
Sravan Kumar.Hi Sandeep,
1. Are the setting in cfg files same for both the applications.
Both applications are in same server and using the smae cfg file.
2. When you had run the calc script, was system consuming same amount of resources i.e processor , RAM ..etc. for both application at two different times. Check ,any parallel execution happening with 1st application's calc script.
System OS is Linux, I dont have much idea of linux like how to see the RAM ,processing etc. Is there any way to find.
3. Finally, you can check for server end, anything happened when you ran 1st application's calc script, by referring to OS logs.
No idea of Linux server log files.
If you provide the detailed information is appriciated.
Hi Glenn,
I'll ask the silly question. Do you have sut updatecalc off on in both scripts? If not, it's possible intelligent calculationis turned oon. In the first cube, the values would be calculated and would not be affected by your calc. In the second new db, they would not have been
I have used the updatecalc off option also. But no result for first application and result for second application.
Regards,
Sravan Kumar. -
Running same backup script on two different Databases
Hello All,
I am running same backup script on two different Databases.
But output is different.
Please give me your feedback.
1) Database 1:
OS: AIX
DB: 10.1.0.4.0
Script:
export ORACLE_SID=sid1
cd $ORACLE_HOME/bin
./rman nocatalog << EOF
connect target
ALLOCATE CHANNEL FOR MAINTENANCE DEVICE TYPE disk;
configure controlfile autobackup on;
backup as compressed backupset database plus archivelog delete input;
delete noprompt obsolete;
exit
EOF
6 Files created:
-rw-r----- 1 oracle dba 4140032 Jun 19 00:00 uvhlvjs8_1_1
-rw-r----- 1 oracle dba 38029824 Jun 19 00:00 backup_uuhlvjs8_1_1
-rw-r----- 1 oracle dba 781287424 Jun 19 00:20 v1hlvjsk_1_1
-rw-r----- 1 oracle dba 578027520 Jun 19 00:23 backup_v0hlvjsk_1_1
-rw-r----- 1 oracle dba 1222656 Jun 19 00:23 backup_v2hlvl7r_1_1
-rw-r----- 1 oracle dba 4259840 Jun 19 00:23 c-1052429639-20060619-00
-rw-r----- 1 oracle dba 4177920 Jun 19 00:23 SNAPCF_ATHENA.F
2. Databse 2:
OS: Linux (SLES 8)
DB: 10.1.0.5.0
Log Archive Filename Format: %t_%s_%r.dbf
2 files created:
1_17804_535674251.dbf 1_17837_535674251.dbf SID_2chlmrrl_1_1.1
1_17805_535674251.dbf 1_17838_535674251.dbf SID_2dhlms8c_1_1.1
I am also getting dbf file every one hour as below:
1_17868_535674251.dbf
DNwaiting for reply
-
Use two indicators for the same variable in two different VIs
hello, I want to use two indicators for the same variable in two different VIs running at the same time
should I use global variables?? I want to avoid because I have lot of variables and it would takes too much memory,I tried with this code but the value of the second indicator is not updated
I tried to use the queue and it works but the problem is as i said previously that i have many variables shoud I use a queue for each one??
what should I do?
thank you in advance
cordialy
Attachments:
projet.zip 13 KBCrisSTine01 wrote:
hello, I want to use two indicators for the same variable in two different VIs running at the same time
I'm a huge fan of User Events to send updates to GUIs from who knows where.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Maybe you are looking for
-
When I start Firefox and if I close and then reopen it the address bar is fine. But when I go the a new address, the menu bar overlays the address bar. Also a small number of pages, such as this one are overlayed with some garbage which is other part
-
Is my Mac Book Pro Mountain Lion Compatible, Is my Mac book Pro Mountain Lion Compatible
I have just found out, that my iMac is not compatible. I am very annoyed at this latest developmnet, and I am seriously considering moving back to Pc's. In the meantime I would at elast like to find out if my Mac Book Pro is. the details are: MacBook
-
Skype Causing USB Headset to Code 45
For whatever reason, the prolonged use of Skype for a voice call will cause my headset in the device manager to code 45, or disconnect from my computer without actually being disconnected. Pressing CAPS/NUM/SCROLL lock, or running dxdiag causes the s
-
i bought osx lion for download but I cannot find where it is on the app store. i currently have 10.5.8 so I dont know if that has something to do with it.
-
ASKB - Periodic Asset Postings
Hello dear all, When i launch the transaction ASKB in test modefor month 10, i obtain the following error: - Account 'Revaluation of acquisition and production costs of assets' could not be found for area 88 - for company CC01. Enter this account in