Difference in PL/SQL between 8i and 9i

Hi
Where can I find the exact differences in PL/SQL alone between 8i and 9i from developers point of view.
I appreciate your help
Thanks

Well, you would find it at the most obvious place - The Oracle documentation, where else?
http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96624/whatsnew.htm#967650

Similar Messages

Difference in the Balance between FS10N and Customer Balances in Local Curr

Hi,
When i am trying to match the Balances between FS10N and Customer Balances in Local Currency for the Period 8, we are getting the difference, The reconcilliaton Account was changed on 30.08.2010.
Please help Us in tracing the differences between FS10N and Customer Balances in Local Currency.
What could be the possible reasons for the differences..
Thanks

Hi Varshani,
Please use the program/report SAPF070 to compare or reconcile your AR with GL balances. You can use SAPF071 to correct any inconsistencies. Provided below documentation for these programs.
SAPF070 - Compare Documents and Account Transaction Figures
Description
This program compares debit and credit transaction figures in customer, vendor, and G/L accounts with the debit and credit totals from documents posted in the corresponding posting period (accounting reconciliation). The sales totals are also compared for customer and vendor accounts. There is no separate comparison for special G/L transactions.
A comparison for G/L accounts can be made in company code currency and in parallel currencies (such as group currency). A comparison for customer and vendor accounts can only be made in company code currency.
After the program has finished, a message is issued to the user that started the program. This message summarizes the results of the reconciliation.
Output
The program compares the totals of an account on a periodic basis. If the debit and credit total differs between account and documents, the account is printed with the debit and credit totals and the difference.
Differences in G/L accounts are shown per transaction currency. The first line shows the amount in local currency, the second line shows the amounts in transaction currency.
If a document which falls within the selection range is posted during the program run, the program is terminated since a reliable result can no longer be delivered.
SAPF071 - Adjust Balances after Comparing Documents/Transaction Figures
Description
If a financial accounting comparative analysis (SAPF190) or a comparison of documents and transaction figures (SAPF070) shows that there are differences between documents and transaction figures, you can use this program to make an adjustment. The documents form the basis for this adjustment. The program adjusts the (redundant) transaction figures, which are only totals of amounts from documents.
Requirements
All of the following listed requirements must be fulfilled:
1. A financial accounting comparative analysis (SAPF190) or a comparison of documents and transaction figures (SAPF070) must be made, and differences must be found between documents and transaction figures.
2. There must not be any inconsistent documents found. These are listed in both SAPF070 and SAPF190 as well as in this program.
3. There cannot be any problems in the other modules. Caution: You have to check this yourself. Financial Accounting may be correct but the other modules may not be, and this will adversely affect the program run.
4. You can only make the adjustment in the ledgers which are compared by program SAPF070. This is ledger 00 or a user-defined ledger for all parallel local currencies except the group currency. (The program displays these ledgers). You have to adjust any additional ledgers as well as average balance ledgers yourself.
5. No documents during the period in which you are adjusting transaction figures can be archived. Caution: You must ensure that these documents are not archived by establishing appropriate organizational rules and procedures.
Only use this program after consulting with SAP or after checking the prerequisites thoroughly.
You should adjust all differences together for a single company code. By setting the program parameters you can limit the adjustment to G/L currency types or to balances in subledgers.
It is advisable to execute a test run first, which will list any differences that are found.
Further notes - Authorizations
Repair program authorization group (F_005)
Company code authorization (F_BKPF_BUK)
Thanks
Venkata Ganesh Perumalla
Edited by: Venkata Ganesh Perumalla on Sep 28, 2010 1:30 PM

Differences in sort order between iTunes and iPod

Can someone explain how the sort order of artists / albums works? It seems that it is different between iTunes and the iPod. In iTunes (7.3.1) I can enter data in the fields for Artist, Album Artist, Sort Artist and Sort Album Artist. When I get the tracks to appear in the order I want in iTunes, it doesn’t seem to transfer across to my iPod. I know there are some differences in how the sort order works in both, but how is it different?
John.
Dell 5150 Windows XP

ou must have an older iPod.
I believe the new sort order only works on the new iPods (Nano and Video)

Difference in event handling between Java and Java API

could anyone list the differences between Java and java-API in event handling??
thanks,
cheers,
Hiru

the event handling mechanisms in java language
features and API (java Application Programming
Features)features .no library can work without a
language and no language has event handling built in.
I am trying to compare and contrast the event
handling mechanisms in the language and library
combinations such as java/ java API.
all contributions are welcome!
thanks
cheersSorry, I'm still not getting it. I know what Java is, and I know what I think of when I hear API. (Application Programming Interface.) The API is the aggregation of all the classes and methods you can call in Java. If we agree on that, then the event handling mechanisms in Java and its API are one and the same.
So what do you want to know?
%

Difference in text rendering between PDF and Mars?

I was doing some testing with Mars and stumbled upon what
seemed like suboptimal text rendering. Because it was quite subtle
and I wanted to make sure there was an actual difference, I did a
little comparison between PDF and Mars rendering.
See this image. Can
you see a difference?
I'm still not sure whether there is an actual difference, but
I still somehow got the impression that the upper example (PDF) is
a little more polished then the lower one (Mars). Are different
rendering paths actually used? Will it remain that way?
My SVG for Mars was very simple:
<text font-size="10pt" x="20" y="20" fill="rgb(0,0,0)"
font-family="F0">aex</text>
The PDF was produced with MS Office 2007 and Microsofts Save
as PDF plugin (also at 10pts). The font is Gentium.

The difference *IS* subtle, but you're right -- there does
appear to be a perceptible difference between the two samples.
Without making an in-depth study, it's hard to say whether we
can do anything about this. Even though they're both opened in
Acrobat, the rendering path for a Mars document is *VERY* different
from the path for a PDF document, and many of the events along the
chain are out of the control of those of us writing the Mars
plugin. There are some text-quality issues that I'd like to take
care of in time for our next release, however; perhaps I'll be able
to address this particular issue at the same time.

Differences in "storage used" between iPad and iTunes

I have an iPad Mini 2 and there a differences between the stated "storage used" between the iPad and iTunes.
Looking in the general settings "Storage" it states I have used 113GB and available is 413MB.
Looking on iTunes, when the iPad is connected, it states I have 67.20GB free.
Which is correct and what causes the problem?
How is it fixed if it is because the iPad has a fault?
Many thanks.

It is now a couple of weeks and noticed the discrepancy occurring again. I did not want to go through the above process again because it took about 4 hours to get my iPad up, running again and normal.
Again, there was a difference in memory by about 20GB.
This time it tried something different.
1) Went into General settings on iPad and managed memory. From here I removed all films and TV episodes. Now Video memory was zero.
2) Switched off WiFi. When I opened the Video app, I noticed a pile of films and TV episodes showing, even though they had the cloud icon. They could even be watched. I deleted these films/episodes.
3) Viewed the iPad memory using iTunes on laptop and compared to iPad general settings usage (video memory negligible). Both numbers pretty much spot on.
My musings - I can only assume that the iPad does not properly delete films/episodes that I had previously watched. It is evidently holding on to the video, even though I had deleted them and they were not showing in general settings. Though it is a hassle, I at least now how to find where the "lost" memory is and how to reclaim it.

Difference in WS performance between Search and Retrieve operations?

All,
We are currently working on a new repository and planning to use MDM webservices on top of that repository for searching and retrieving the data.
Now I'm curious about the difference in performance between the Search and the Retrieve operations and also within the Retrieve operation, between the different identification methods (internal ID, auto ID, remote key, unique field and display field).
Because in the webservices guide is stated that the identification methods are listed in order of best performance, but what are these performance differences between these methods (e.g. a retrieve on internal ID is x times faster than a retrieve on remote key which on his turn is x times faster than a retrieve on display fields which on his turn is x times faster than a search operation on same display field).
Of course the performance depends on lot of other things as well, but I just want to get a feeling on the performance related to eachother (keeping all other variables that can influence the performance the same!)!
I hope that any of you has experiences with all possibilities and can share performance measurements between the different operations related to eachother. Thanks in advance.
Regards,
Marcel Herber

Hi,
Did you implment Webservices in your site.
We are also having a similar scenarion where we have to serach a Records in MDM from SAP PI based on the certain criteria. I am concerned about the SAP MDM performance , since we are having heavy amount data being loaded every 30 minutes.
Please let me know the performace aspects of using Webservices.
Thanks
Ganesh Kotti

Difference of JDK version between sharing and non-sharing

Hi,
Here, I got two version of JDK 1.6 as below:
Java HotSpot(TM) Client VM (build 1.6.0_01-b06, mixed mode)
Java HotSpot(TM) Client VM (build 1.6.0_01-b06, mixed mode, sharing)
What's the difference between them? Where can I download the non-sharing one?(actually, the non-sharing version now I got, is somebody gave me, he can't remember where he got it)
I know the sharing version can speed up the loading process, but the problem I met has nothing concerning about this.
My application is to read data from some xml files, and to import them into database. But the performance of using these two version of JDK is so different. Using the non-sharing version could be pretty much 10 times faster than the sharing one. Even if I turn off the switch of sharing by using -Xshare:off, I still couldn't get help.
Someone cool guy can help me here? Thanks!

I don't personally have much experience relinking across platforms. (We use Windows servers although I use Mac locally.) But, here's what info I can provide:
File paths in InDesign can be specified in 2 ways. One is platform-specific paths, and the second is URI notation. The URI notation is the same cross-platform, but even so, I imagine the volume names are different as well. Specifying the URIs in an InDesign file would prove to be challenging as well, although you can easily specify it in an IDML file.
Another avenue to explore would be to specify relative paths. By default InDesign writes absolute paths, but relative paths are supported. If I'm not mistaken, that's what the InDesign package functionality does.
Your best bet will probably be to run a script when the document loads on the machine for the first time and loop through all the links and change the paths to the correct location.
HTH,
Harbs

Difference in control panel between 6500 and 6500 e709n series

Hello,
Although I still have a non-solved problem in this topic (printing from IE8 x64), I already have another one.
It seems that there are three 'printers' installed in control panel. One is called HP Officejet 6500 E709n Series fax, which I understand is the fax. However, the other two seem very similar to me. Hp Officejet 6500 and HP Officejet 6500 E709n Series. I would like to know the difference between those two, especially because I rarely have to switch between those two, when one of them does not work.
Which one is the best to set as default, and why won't I just delete the other one?
Thanks,
Michael B

Print from both to test them. Delete one (if only one works, delete the other one).
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How much difference will I notice between 2011 and 2013 MBA, fully upgraded?

I'm considering upgrading. I have a 2011 13 inch MBA, fully upgraded. So:
* 256 GB SSD
* 4 GB RAM
* 1.8 Ghz core i7
I'd get the 2013 13 inch with 512 GB, 8 GB ram and 1.7 GHz i7. I don't need the battery life, I'd be upgrading because I've noticed a few choke points on my current machine:
* Sometimes tabs will lag when opening (despite very fast internet)
* Fan is loud
* Computer runs hot in summer months
* Occasional system lag or lag on specific programs like Pages when I have large files open
* General slowness that happens sometimes.
Will any or all of those issues be reduced with the increase in RAM or other system wide increases?

It's hard to say just how much improvement it will make on the examples you gave, because there is no indicator of how much resources are being consumed by open and running apps.
Will you notice a difference... Probably. A HUGE difference, likely not, unless the memory resources are a limiting factor already on you machine.
I have a 2010, a 2011, and a 2012 MacBook Air. The difference between the 2010 and the 2013's speed is only slightly evident on 75% of my usage. The other 25%, the diffrence is more pronouced (when doing long duration tasks like video and photo editing).
You may want to upgrade this time around, especially with your memory possibly being a factor. I however, am sitting out this one cycle. (unless I fall of the wagon)

Difference in string comparisons between varchar and nvarchar

These statements were executed on SQL Server 2008 R2 Enterprise. Collation is the default SQL_Latin1_General_CP1_CI_AS.
Any ideas why the difference in behavior?
DECLARE @StringWithCharZero VARCHAR(100), @StringWithoutCharZero VARCHAR(100);
SELECT @StringWithCharZero = CHAR(0) + 'TEST', @StringWithoutCharZero = 'TEST';
IF @StringWithCharZero = @StringWithoutCharZero
BEGIN
PRINT 'VARCHAR EQUAL';
select ASCII(LEFT(@StringWithCharZero, 1)), ASCII(LEFT(@StringWithoutCharZero, 1));
END
ELSE
BEGIN
PRINT 'VARCHAR NOT EQUAL';
select ASCII(LEFT(@StringWithCharZero, 1)), ASCII(LEFT(@StringWithoutCharZero, 1));
END;
GO
DECLARE @StringWithCharZero NVARCHAR(100), @StringWithoutCharZero NVARCHAR(100);
SELECT @StringWithCharZero = NCHAR(0) + N'TEST', @StringWithoutCharZero = N'TEST';
IF @StringWithCharZero = @StringWithoutCharZero
BEGIN
PRINT 'NVARCHAR EQUAL';
select UNICODE(LEFT(@StringWithCharZero, 1)), UNICODE(LEFT(@StringWithoutCharZero, 1));
END
ELSE
BEGIN
PRINT 'NVARCHAR NOT EQUAL';
select UNICODE(LEFT(@StringWithCharZero, 1)), UNICODE(LEFT(@StringWithoutCharZero, 1));
END;
GO

Hello,
I got the followng result after run the query on SQL Server 2008R2 SP2 Enterprise edition:
SQL Server specific version: Microsoft SQL Server 2008 R2 (SP2) - 10.50.4260.0 (X64) Jul 11 2012 15:47:13 Copyright (c) Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack
1) (Hypervisor)
Please install the latest Service Pack for SQL Server 2008R2, we can get it from the link below:
How to obtain the latest service pack for SQL Server 2008 R2:
http://support.microsoft.com/kb/2527041
Regards,
Elvis Long
TechNet Community Support

Big difference in RAW converter between Aperture and Nikon Capture NX

hi
here's a quick photo for comparing (hosted on my site since it's huge):
http://www.raffaz.net/stuff/nx_aperture.png (4.4mb uncompressed PNG file)
I'm quite disappointed by some aspects of Aperture's RAW handling... or at least, by comparing it to Capture NX.
by looking at the picture, you can instantly see that NX raw photo is much sharper, and it is nearly perfect (apart from the not-perfect photo itself).
by looking at Aperture's shot, you can see that it's blurry, with moirè and noise-like problems..
the screenshots are 100% crops from the latest versions of the applications, using flat settings as you can see (just import, deselect everything the app will do), the camera is a Nikon D70, the lens is a 18-70 f3.5 and the file is a .NEF (nikon raw). settings for the photo are ISO200, f8, 1/15, 50mm on tripod.
I admit I'm very surprised by this difference. I'm using the trial of NX (just wanted to test it since it's brand new) and when I noticed all these differences I was shocked. I'm not saying that NX is better than Aperture, I think that Aperture is still unbeaten in a lot of fields, but could someone please explain me this huge difference in quality?
if needed, I can provide more screenshots with other photos

hi
here's a quick photo for comparing (hosted on my site
since it's huge):
http://www.raffaz.net/stuff/nx_aperture.png (4.4mb
uncompressed PNG file)
I'm quite disappointed by some aspects of Aperture's
RAW handling... or at least, by comparing it to
Capture NX.
by looking at the picture, you can instantly see that
NX raw photo is much sharper, and it is nearly
perfect (apart from the not-perfect photo itself).
by looking at Aperture's shot, you can see that it's
blurry, with moirè and noise-like problems..
the screenshots are 100% crops from the latest
versions of the applications, using flat settings as
you can see (just import, deselect everything the app
will do), the camera is a Nikon D70, the lens is a
18-70 f3.5 and the file is a .NEF (nikon raw).
settings for the photo are ISO200, f8, 1/15, 50mm on
tripod.
I admit I'm very surprised by this difference. I'm
using the trial of NX (just wanted to test it since
it's brand new) and when I noticed all these
differences I was shocked. I'm not saying that NX is
better than Aperture, I think that Aperture is still
unbeaten in a lot of fields, but could someone please
explain me this huge difference in quality?
if needed, I can provide more screenshots with other
photos
I dont like Capture NX one bit, its just as slow and sluggish as the previous version. The reason why pics often look better in Capture is becuase Nikon wrote it, after all the NEF format is theres.
To be honest Capture NX cannot be compared to Aperure there not in the same league, and you can pick up Aperture for the Same price as Capture NX on ebay brand new i would alwasy go for aperture far better value for money IMHO.

Difference in Resource management between PPM and MRS

We have SAP CRM opportunities, PS Projects (no networks), No Plant Maint, No CS, Resources around 600, multi skill set tracking, global resource management pool, CATS timesheet.
is it necessary to install MRS for resource management or is PPM RM functionality sufficient?

Hi Salim,
within PPM Resource Management you can staff resources to roles of the project and assign these to tasks. You can have a staffing directly within the project or there is a cross-project view in the Resource Management role of PPM. In PPM there are different scenarios who is allowed to staff (e.g. project lead, resource manager, extended process using candidate manager).
The demand on the role level can be defined either as a block without distribution (e.g. 40 days between 01.01.2013 and 31.12.2013) or distributed on monthly or weekly level (e.g. 2 days in Jan, 2 days in Feb).
Since MRS is a dedicated Resource Management tool there are additional functions in MRS.
It depends on your process if you require these in your scenario or nor. These addtional features e.g. include amongst other
- Graphical Visualization of the resource demands and staffings (see screenshot below)
- planning down to a daily level
- more flexible definition of multiple responsible resource managers
- optimized for handling of huge number of resources/requests
So as I wrote earlier it will probably not be possible to say what you should use without knowing the detail requirements.
Regards, Andrea

Difference in selection tools between CS3 and CS4?

I have not used CS4 or 5. I read there are big differences from CS3 to CS4 with regards to making selections.
How much different are the following tools in CS4 over CS3?
- marquees
- laso tools
- magic wand
- quick mask
Thanks.

The tools you mention have not changed noticeably.
There are additional tools and refinements in later versions.

Difference in workschedule text between T508A and display in IT0007

Hi,
I have made a change in text description for a workschedule in T508A and then transport my change into Test system. But I have now no correspondance between the value in T508A and the value displayed in IT0007 with F4 or when WS selected.
I have tryied to transport again my entry but this is not solving the problem.
Does anyone already have this issue ?
Thanks a lot,
KR
Greg

Hi Gregory,
Please review this thread, your solution is there.
Re: work Schedule rule Text
why don't you debug it?
you can break-point RE508S routines.
MODULE GET_RTEXT INPUT.
PERFORM RE508S USING P0007-SCHKZ.
ENDMODULE.
alternativlely this is the abap select sentence:
CHECK T508S-SPRSL NE SY-LANGU
     OR T508S-ZEITY NE T503-ZEITY
     OR T508S-MOFID NE T001P-MOFID
     OR T508S-MOSID NE T001P-MOSID
     OR T508S-SCHKZ NE T508S_SCHKZ.
SELECT SINGLE * FROM T508S WHERE SPRSL EQ SY-LANGU
                             AND   ZEITY EQ T503-ZEITY
                             AND   MOFID EQ T001P-MOFID
                             AND   MOSID EQ T001P-MOSID
                             AND   SCHKZ EQ T508S_SCHKZ.
CHECK SY-SUBRC NE 0.
CLEAR T508S.
You probably have corresponding entry with no text (if sy-subrc is 0) or no corresponding entries (if sy-subrc has other value than 0).
Good luck.
Cheers.

Difference in PL/SQL between 8i and 9i

Similar Messages

Maybe you are looking for