Difference in Profit Center Payables report and Vendor Balance report
Hi Gurus,
After posting an invoice, i can see that invoice posted if i execute FBL1N or FBL3N but if i execute Profit Center Payables report, balances are not updated.
Is there any PC Push facility in SAP, which updates the balance of PC Payable report after executing this PC Push? Please let me know.
Thank You
Regards,
Dear,
Are you able to see the General Ledger View of that entry?
mukesh
Similar Messages
-
Difference between profit center in OKB9 and material master
Hello,
I have a small doubt over here in the profit center point of view.
We have created profit center 1200 and assigned the same in material master. Now while doing PO system threws error message like "Account 5005115 requires an assignment to a CO object Message no. KI235". To eliminate this error i have assigned Cost element(1001125) and Profit center(1200) in TC: OKB9, now system is able to post everything fine.
Here the issue " If i can change profit center in the material master say ex: 1201, system picks from the material master only then why assigned in the OKB9? while doing MIRO system updated in the 1201 profit center".
Could anybody update me why we need to assigned profit center in OKB9 and Material Master?
Thanks
anifiHi,
This is about co.code level field status and Transaction level field status. In OKB9 transaction profit center is maintained and it is getting picked up.
As per SAP if any transaction level field status is maintained it will overwrite the co.code level field status.
So, here when you are giving the input of Profit center in the material master itself it is overwritting the co. code level field of profit center. If nothing is given in material master, then by default OKB9 level profit center will be picked up.
Thanks,
Prithwiraj. -
Profit Center wise & customer and vendor ageing balance
HI,
If anyone has developed the profit center ageing report for customer & vendor open items, then plz provide me the logic used. I need the same to implement for my customer.
Standard reports ( FBL1N/FBL5N or new GL reports) are not solving my purpose
Thanks:
GauravPCA wise Customer Aging: - Development
I also developed the same report with following logic and It is working till now.
1. Copy the Standard customer aging report S_ALR_87012176 and pass the same documents into FAGLFLEXTA and get the Profit Center.
PCA wise Open Items: - Standard
1. GO to FAGLL03 Report
2. Give all customer reconciliation accounts in GL Account Field in selection (including Spl GL Recon Accounts)
3. and Execute report, call Customer Code, and Profit Center Field in Layout (in standard layout, Customer Code available, name is not viable).
4. Short PCA and Customer wise, we will get PCA wise Open Items.
use the same logic for Vendor also.
Please check and revert if you need more clarity.
Regards,
Ganesh Lokam -
Profit Center in Customer and Vendor Line item
Hello Guru
i have one doubt we have activated the new GL in one of client for profit center level. while posting through any of financial transaction particularly customer and vendor there is no filed for input parameters for profit center. while booking these kind of transaction system pick up the dummy profit center. even our field status group for gl master data and posting key made as optional PCA filed not displaying. client want it should be pick up automatically from line item and should be input parameters.
how to resolve this issue please let me know.
waiting for your reply
Thanks & Regards
Laxmi narayanHi,
You are saying that u have activated New G/L, but are u gone for document spliting also or not? if you have activated document spliting customer and vendor line items not at all required any profit center because it will petch the profit center from oppsite line item automatically for giving tallyed balance sheet at profit center leavel, so no question profit center required or going to dummy profit center because dummy profit center will be locked automatcially once u activate document spliting.
if you have not activated document spliting then customer and vendor line items may require profit center its depends on your field status settings, if you feel that it should not go to dummy profit center then maintain some profit center in 3keh & 3kei settings for customer and vendor reconcliation accounts, so that it will post to that profit center.
Thanks & Regards
T N R -
The client is looking for trial balance and GL balance reports in Spanish
hi sap techis
I am facing a typical issue.the client is looking for trial balance report and GL balance report in Spanish language.the problem is if i change the language key from English to Spanish the entire language will be changed to Spanish is there any way by which without changing the language key in chart of accounts, we can obtain the reports in Spanish language.please help in taking out reports in Spanish from F.01 in Spanish
Edited by: akausar on Apr 16, 2010 12:42 AMYou have to translate all your financial statement version nodes from English to Spanish to be able to see Spanish texts in F.01. To translate, execute T Code SE63 and choose Translation -> ABAP Objects -> Other Long Texts from the menu. Then expand 'FI FI Balance Sheet/P&L Statement' and double-click on 'FIBS FI Balance Sheet/P&L Statement '. Then change the source language to EN and target language to ES (they are greyed out but you will still be able to pick them from the drop-down menu). Now put the cursor on Object Name field and press F4. You will see the financial statements you have created in OB58. It is a cumbersome task, but you have to drilldown to each node of your FSV and double-click on it and in the following screen you will see the English text on top. In the bottom part of the screen you have to enter the Spanish text.
Once you are done with translation, execute program RS_LXE_RECORD_TORDER and then push your translations into a transport request. -
Profit Center population in the Vendor and Customer Line items
hello
our client is asking for getting profit center in the vendor and customer line items where in the view FBL5n and fbl1n we are not getting the profit center populated - in the new gl i understand that there is a standard report based on the gl account.
but our business is not satisfied with the report and expecting report at profit center level.
Can any one suggest any way of doing this.
regards,
VijayDear Vijay,
Let me provide you my view of solutioning for this. This is an enahcement that needs to be done
1. You can get the profit center from the given vendor and customer line item at the time of posting, using an enahcement you will be able to capture it.
2. Existing the profit center field is not populated in the BSIK,BSAK,BSID and BSAD tables
3. Hence, in the same enhancement once you capture the profit center , you can write the code that profit center is updated in these tables also.
4. This will help you to do the vendor line item wise selection in the FBL1N, FBL5N profit center wise.
Constraints of this solution:
The only constraint remains where in the for a given document if there are multiple profit center, then the system will do the splitting profit center wise for a vendor line item, which will not populate the profit center in those tables as there is only one field available in the bsid etc.. tables.
This basically would be the one the soltuion where in as seeen from the end user ther eis no change in the front end interface , the way they are doing always they can do.
You need to also take care the % of document splitting means cross profit center postings /cross document splitting charactericstics postings and the volume involved in this. so that you can suggest this to your client.
Regards,
Bharathi. -
Difference in Profit Center Document and CO-PA Document
Hi,
We are getting difference in Profit Center Document and CO-PA Document Cancelled Sales Invoice.
Sales Accounts GL:
Profit Center Document amount in Sales Accounts GL: 558095.04
CO-PA amount in Sales Accounts GL: 558095.15
In Sales Invoice, Exchange Rate is maintained as 7.75132
Invoice Amount is 72000 USD. So the Amount calculated should be 558095.04.
In Accounting Document the Amount posted as 558095.15 for the GL Sales Account.
But in Cancelled Sales Invoice, Amount posted is 558095.04 in GL Sales Account.
So Profit Center Document is picking the Amount 558095.04, but CO-PA document is picking wrong amount i.e from Sales Invoice and not from Cancelled Invoice.
Please help me to understand why Co-PA Document is fetching amount from Sales Invoice and not Cancelled Invoice.
Also why there is difference in Sales Order Invoice and Cancelled Sales Oder invoice Amount.
Regards,
Debashri DuttaHi
Yes you can transfer the planning data from COPA to ECPCA. You can do the configuration at
SPRO->Controlling->Profitability Analysys->Planning->Integrated Planning->Set up transfer of planning data to ECPCA/FIGL
Then you can use TCode KE1V to transfer the planning data.
Regards,
Suraj
Edited by: Suraj Ramamurthy on Nov 13, 2008 1:59 PM -
Plant and Profit center wise Turnover and gross profit for the Month for s
Hi
We need a report Plant and Profit center wise Turnover and
gross profit for the Month for selected month and GL's
We are using new GL. but our bi system old version.
SAP_BW -- 7 Patch:SAPKW70015
BI_CONT - 703 Patch:SAPKIBIIP7
Do you have any idea or experiences which data source and data target required to full fill this requirement?
Thanks
Ramana PHi
You need to check if you really the report Plant wise and if yes, then check if the Accounting Transactions are maintained at Plant Level in your source system i.e. in R3.
Ideally it should be Business area or Functional Area or Controlling area which are maintained in Accounting Transactions. You will also the relevant details for these Characterisitics + Profit Center in the NEW GL Accounting data sources.
Cheers
Umesh -
Customer and Vendor ageing report by ItemGroup@%@#$%@#$??
Hi All
How do we get Customer and Vendor ageing report by "ItemGroup"?
I know there is a standard report in Business One which gives you the ageing report by Business Partner Group. But I dont know whether it is possible to get by "ItemGroup". Please help me and excuse me for weird requirement..
ThanksHi Gordon,
that query is actually designed for getting the purchase reports with all the excise and other tax related information per line item in the marketing document. my requirement is something different than this where the client wants to see the ageing report by Itemgroup.
Since ageing is based on the invoice due date it looks difficult to bifurcate the each individual line item, its group, its line total and their due date. means we should add all the open invoices' line items to be grouped with its total based on the due date. any other way to solve this?
thanks -
Profit Center Not coming in Vendor Line Item in MIRO
Hi Experts,
We are facing one problem when we are posting miro in one plant profit center is coming in vendor line item in miro. But when we are posting miro with the same material code but with different plant same company code. But in miro vendor line item profit center is not coming.
What mistakes we have done in spro.
Kindly help me out.
Regards
GRHi
Normally vendor line item will not carry profit center, hence I think this is populated through some enhancements.
Hence you may need to analyze with the help of an Abaper.
Regards -
What is the difference in Interactive reports and Drill down reports?
What is the difference in Interactive reports and Drill down reports? Are they same?
Hi FRD ,
Both are same .
as far as i know there is no difference .
bye . -
Difference between Interactive report and ALV Interactive report.
What is the difference between Interactive report and ALV Interactive report.
i think there is no much difference the same Interactive report Events and functionality we will implement with ALV.
Experts guide me.Hi,
ALV interactive report gives many advantages than interactive report like sorting, summing and getting graphics.
An interactive report generally basic list displayed. User double clicks on any valid line or user selects a line and presses as button on the tool bar. Then the corresponding event is triggered
refer
http://www.sapgenie.com/abap/drill_down_reports.htm
You can find a interactive ALV report here
http://www.sap-img.com/abap/an-interactive-alv-report.htm
also refer
Below threads consist of number of interactive ALV codes:
interactive ALV code
ALV-INTERACTIVE.
Interactive ALV
Regards -
Tax Report and Tax Reconcilation Report
Can anyone tell me what is the difference between Tax Report and Tax Reconcilation Report?
What is Tax Reconcilation Report supposed to do?From the Help Files this is what I have
Tax Report
In this report, you can display documents and manual journal entries that include tax amounts, sorted by tax code.
The tax report includes the following documents:
A/R and A/P invoices and credit memos
Stock transfer documents The stock transfer transactions are displayed only in order to report the transactions in the report due to the fact that the tax percentage is 0.
Manual journal entries
Incoming payments and payments to vendors that are not based on invoices
Incoming payments and payment to vendors that include cash discounts
Tax Reconciliation Report
This report enables you to track the taxes amounts that were posted in sales and purchasing documents and in manual transactions.
The report displays the G/L accounts involved in these transactions and calculates the tax amounts that should have been paid, based on the tax codes defined for each transaction.
The report covers the following transactions:
A/P and A/R invoices
A/P and A/R credit memos
Manual journal entries
A/P and A/R down payment invoices
Incoming and outgoing payments -
Profit Center wise G/L Account balance Display
Hi,
I m unable to find Standard Report Profit Center wise G/L Account balance Display (for ref.: FS10N)...
when i m creating it's Z report, facing some problems like period showing 16 instead of 9 and other's...
please let me know what can i do...
thanks...HI!
Profit Center wise G/L Account balance Display
Tcode:S_PL0_86000030 - G/L Account Balances (New)
regards,
Rup -
This report for Vendor Balance Reconcillation.......
Hi Seniors,
Please help me with this issue........i have to develope a New report Vendor balance Reconcillation ......Using the Standard report S_ALR_87012082 vendor balances in local currency.....it should be same like this Standard report but this Report is not Designed to give Line Items Because it has Picked up the Data only from few tables like LFA1 LFB1 LFC3.....which give Direct Balances in these tables......But i have Developed a report to Some Extent....But Finding it Difficult in Adding a Special GL Date which is Reflecting in the LFC3 Table....I have to Keep a Check Box Special GL balances in the Selection-Screen when when ever i select Special GL Balances indicator ....Date from LFC3
should be Selected and Addred to the Final in the Internal Table....I have Written a program .......Based on GSBER And LIFNR SUBTOTALS.....I have to Add this New check box in this Slection-Screen.....this report should be same like this Standard Report....S_ALR_87012082...the Program for this Report is RFKSLD00...please tel me the logic or help me with the Modification my below Report.....If i am not clear please reply me back...
waiting for your replys...
Thank you...
*& Report ZVENDOR_BALANCES
REPORT ZMM_PO_CHECKLIST.
TYPE-POOLS : SLIS.
DATA: it_fcat TYPE slis_t_fieldcat_alv,
wa_fcat LIKE LINE OF it_fcat,
lt_top_of_page TYPE slis_t_listheader,
ls_layout TYPE slis_layout_alv,
gt_events TYPE slis_t_event.
TYPES : BEGIN OF TY_BSEG,
LIFNR TYPE BSEG-LIFNR,
BUKRS TYPE BSEG-BUKRS,
BELNR TYPE BSEG-BELNR,
GJAHR TYPE BSEG-GJAHR,
SHKZG TYPE BSEG-SHKZG,
GSBER TYPE BSEG-GSBER,
DMBTR TYPE BSEG-DMBTR,
WRBTR TYPE BSEG-WRBTR,
SGTXT TYPE BSEG-SGTXT,
buzei TYPE bseg-buzei,
buzid TYPE bseg-buzid,
augdt TYPE bseg-augdt,
augcp TYPE bseg-augcp,
augbl TYPE bseg-augbl,
bschl TYPE bseg-bschl,
koart TYPE bseg-koart,
umskz TYPE bseg-umskz,
zuonr TYPE bseg-zuonr,
saknr TYPE bseg-saknr,
hkont TYPE bseg-hkont,
END OF TY_BSEG,
BEGIN OF TY_LFA1,
LIFNR TYPE LFA1-LIFNR,
LAND1 TYPE LFA1-LAND1,
NAME1 TYPE LFA1-NAME1,
END OF TY_LFA1,
BEGIN OF TY_LFC1,
LIFNR TYPE LFC1-LIFNR,
BUKRS TYPE LFC1-BUKRS,
GJAHR TYPE LFC1-GJAHR,
UMSAV TYPE LFC1-UMSAV,
END OF TY_LFC1,
BEGIN OF TY_BKPF,
BUKRS TYPE BKPF-BUKRS,
BELNR TYPE BKPF-BELNR,
GJAHR TYPE BKPF-GJAHR,
BLart type bkpf-blart,
BUDAT TYPE BKPF-BUDAT,
bldat TYPE bkpf-bldat,
monat TYPE bkpf-monat,
usnam TYPE bkpf-usnam,
xblnr TYPE bkpf-xblnr,
END OF TY_BKPF,
BEGIN OF it_bsak,
bukrs TYPE bsak-bukrs,
lifnr TYPE bsak-lifnr,
umskz TYPE bsak-umskz,
augdt TYPE bsak-augdt,
augbl TYPE bsak-augbl,
zuonr TYPE bsak-zuonr,
gjahr TYPE bsak-gjahr,
belnr TYPE bsak-belnr,
buzei TYPE bsak-buzei,
budat TYPE bsak-budat,
bldat TYPE bsak-bldat,
xblnr TYPE bsak-xblnr,
blart TYPE bsak-blart,
monat TYPE bsak-monat,
bschl TYPE bsak-bschl,
shkzg TYPE bsak-shkzg,
gsber TYPE bsak-gsber,
dmbtr TYPE bsak-dmbtr,
wrbtr TYPE bsak-wrbtr,
sgtxt TYPE bsak-sgtxt,
saknr TYPE bsak-saknr,
hkont TYPE bsak-hkont,
END OF it_bsak,
BEGIN OF it_skat,
spras TYPE skat-spras,
saknr TYPE skat-saknr,
txt20 TYPE skat-txt20,
txt50 TYPE skat-txt50,
END OF it_skat,
BEGIN OF TY_ITAB,
GSBER TYPE BSEG-GSBER,
LIFNR TYPE BSEG-LIFNR,
BUKRS TYPE BSEG-BUKRS,
BELNR TYPE BSEG-BELNR,
GJAHR TYPE BSEG-GJAHR,
SHKZG TYPE BSEG-SHKZG,
GSBER TYPE BSEG-GSBER,
DMBTR TYPE BSEG-DMBTR,
WRBTR TYPE BSEG-WRBTR,
SGTXT TYPE BSEG-SGTXT,
buzei TYPE bseg-buzei,
buzid TYPE bseg-buzid,
augdt TYPE bseg-augdt,
augcp TYPE bseg-augcp,
augbl TYPE bseg-augbl,
bschl TYPE bseg-bschl,
koart TYPE bseg-koart,
umskz TYPE bseg-umskz,
zuonr TYPE bseg-zuonr,
saknr TYPE bseg-saknr,
hkont TYPE bseg-hkont,
LIFNR TYPE LFA1-LIFNR,
LAND1 TYPE LFA1-LAND1,
NAME1 TYPE LFA1-NAME1,
DMBTR_H TYPE BSEG-WRBTR,
DMBTR_S TYPE BSEG-WRBTR,
DH TYPE BSEG-WRBTR,
DS TYPE BSEG-WRBTR,
HS TYPE BSEG-WRBTR,
BAL TYPE BSEG-WRBTR,
FLAG TYPE C,
LIFNR TYPE LFC1-LIFNR,
BUKRS TYPE LFC1-BUKRS,
GJAHR TYPE LFC1-GJAHR,
UMSAV TYPE LFC1-UMSAV,
UM(15) TYPE P DECIMALS 2,
BUKRS TYPE BKPF-BUKRS,
BELNR TYPE BKPF-BELNR,
GJAHR TYPE BKPF-GJAHR,
BLart type bkpf-blart,
BUDAT TYPE BKPF-BUDAT,
bldat TYPE bkpf-bldat,
monat TYPE bkpf-monat,
usnam TYPE bkpf-usnam,
xblnr TYPE bkpf-xblnr,
spras TYPE skat-spras,
saknr TYPE skat-saknr,
txt20 TYPE skat-txt20,
txt50 TYPE skat-txt50,
LINE_COLOR(4) TYPE C,
LINE_CTR(4) TYPE C,
END OF TY_ITAB,
BEGIN OF TY_TEMP,
LIFNR TYPE BSEG-LIFNR,
GSBER TYPE BSEG-GSBER,
BUKRS TYPE BSEG-BUKRS,
BELNR TYPE BSEG-BELNR,
GJAHR TYPE BSEG-GJAHR,
SHKZG TYPE BSEG-SHKZG,
GSBER TYPE BSEG-GSBER,
DMBTR TYPE BSEG-DMBTR,
WRBTR TYPE BSEG-WRBTR,
SGTXT TYPE BSEG-SGTXT,
buzei TYPE bseg-buzei,
buzid TYPE bseg-buzid,
augdt TYPE bseg-augdt,
augcp TYPE bseg-augcp,
augbl TYPE bseg-augbl,
bschl TYPE bseg-bschl,
koart TYPE bseg-koart,
umskz TYPE bseg-umskz,
zuonr TYPE bseg-zuonr,
saknr TYPE bseg-saknr,
hkont TYPE bseg-hkont,
LIFNR TYPE LFA1-LIFNR,
LAND1 TYPE LFA1-LAND1,
NAME1 TYPE LFA1-NAME1,
LIFNR TYPE LFC1-LIFNR,
BUKRS TYPE LFC1-BUKRS,
GJAHR TYPE LFC1-GJAHR,
UMSAV TYPE LFC1-UMSAV,
DMBTR_H TYPE BSEG-WRBTR,
DMBTR_S TYPE BSEG-WRBTR,
HS TYPE BSEG-WRBTR,
BAL TYPE BSEG-WRBTR,
FLAG TYPE C,
FLAG TYPE C,
BUKRS TYPE BKPF-BUKRS,
BELNR TYPE BKPF-BELNR,
GJAHR TYPE BKPF-GJAHR,
BLart type bkpf-blart,
BUDAT TYPE BKPF-BUDAT,
bldat TYPE bkpf-bldat,
monat TYPE bkpf-monat,
usnam TYPE bkpf-usnam,
xblnr TYPE bkpf-xblnr,
bukrs TYPE bsak-bukrs,
lifnr TYPE bsak-lifnr,
umskz TYPE bsak-umskz,
augdt TYPE bsak-augdt,
augbl TYPE bsak-augbl,
zuonr TYPE bsak-zuonr,
gjahr TYPE bsak-gjahr,
belnr TYPE bsak-belnr,
buzei TYPE bsak-buzei,
budat TYPE bsak-budat,
bldat TYPE bsak-bldat,
xblnr TYPE bsak-xblnr,
blart TYPE bsak-blart,
monat TYPE bsak-monat,
bschl TYPE bsak-bschl,
shkzg TYPE bsak-shkzg,
gsber TYPE bsak-gsber,
dmbtr TYPE bsak-dmbtr,
wrbtr TYPE bsak-wrbtr,
sgtxt TYPE bsak-sgtxt,
saknr TYPE bsak-saknr,
hkont TYPE bsak-hkont,
spras TYPE skat-spras,
saknr TYPE skat-saknr,
txt20 TYPE skat-txt20,
txt50 TYPE skat-txt50,
LINE_COLOR(4) TYPE C,
LINE_CTR(4) TYPE C,
END OF TY_TEMP.
DATA : IT_BSEG TYPE STANDARD TABLE OF TY_BSEG WITH HEADER LINE,
IT_LFA1 TYPE STANDARD TABLE OF TY_LFA1 WITH HEADER LINE,
IT_LFC1 TYPE STANDARD TABLE OF TY_LFC1 WITH HEADER LINE,
IT_BKPF TYPE STANDARD TABLE OF TY_BKPF WITH HEADER LINE,
IT_BSIK TYPE STANDARD TABLE OF TY_BSIK WITH HEADER LINE,
IT_BSAK TYPE STANDARD TABLE OF TY_BSAK WITH HEADER LINE,
IT_BSIP TYPE STANDARD TABLE OF TY_BSIP WITH HEADER LINE,
IT_SKAT TYPE STANDARD TABLE OF IT_SKAT WITH HEADER LINE,
IT_ITAB TYPE STANDARD TABLE OF TY_ITAB WITH HEADER LINE,
IT_TEMP TYPE STANDARD TABLE OF TY_TEMP WITH HEADER LINE.
TABLES : BSEG, LFA1, LFC1, BKPF ,SKAT.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE T001.
SELECT-OPTIONS: Vendor FOR BSEG-LIFNR OBLIGATORY.
PARAMETERS : CoCd LIKE BSEG-BUKRS OBLIGATORY.
PARAMETERS : Fiscal LIKE BSEG-GJAHR OBLIGATORY.
SELECT-OPTIONS : Period FOR BKPF-MONAT .
*SELECT-OPTIONS : b_monate for rfsdo-allgbmon "Berichtsperioden
no-extension,
*SELECT-OPTIONS: SO_LIFNR FOR BSEG-LIFNR.
SO_BELNR FOR BSEG-BELNR.
SELECTION-SCREEN END OF BLOCK B1.
PERFORM DATA_RETRIVE.
*PERFORM SUB_MOVE_DATA.
**PERFORM SUB_FETCH_EXTRA_DATA.
**PERFORM SUB_MOVE_EXTRA_DATA.
PERFORM SUB_CALC.
PERFORM SUB_FIELDCAT.
PERFORM SUB_DISPLAY.
*& Form DATA_RETRIVE
text
--> p1 text
<-- p2 text
form DATA_RETRIVE .
SELECT LIFNR BUKRS BELNR GJAHR SHKZG GSBER DMBTR WRBTR SGTXT BUZEI
BUZID AUGDT AUGCP AUGBL BSCHL KOART UMSKZ ZUONR SAKNR HKONT
FROM BSEG INTO TABLE IT_BSEG
WHERE LIFNR IN vendor AND BUKRS = CoCd AND GJAHR = Fiscal.
IF NOT IT_BSEG[] IS INITIAL.
SELECT LIFNR LAND1 NAME1
FROM LFA1 INTO TABLE IT_LFA1 FOR ALL ENTRIES IN IT_BSEG
WHERE LIFNR = IT_BSEG-LIFNR.
ENDIF.
IF NOT IT_BSEG[] IS INITIAL.
SELECT LIFNR BUKRS GJAHR UMSAV
FROM LFC1 INTO TABLE IT_LFC1 FOR ALL ENTRIES IN IT_BSEG
WHERE LIFNR = IT_BSEG-LIFNR AND BUKRS = IT_BSEG-BUKRS AND GJAHR = IT_BSEG-GJAHR.
ENDIF.
IF NOT IT_BSEG[] IS INITIAL.
SELECT BUKRS BELNR GJAHR BLART BUDAT BLDAT MONAT USNAM XBLNR
FROM BKPF INTO TABLE IT_BKPF FOR ALL ENTRIES IN IT_BSEG
WHERE MONAT IN Period AND BUKRS = IT_BSEG-BUKRS AND GJAHR = IT_BSEG-GJAHR AND BELNR = IT_BSEG-BELNR.
ENDIF.
LOOP AT IT_BSEG.
IT_ITAB-LIFNR = IT_BSEG-LIFNR.
IT_ITAB-BUKRS = IT_BSEG-BUKRS.
IT_ITAB-BELNR = IT_BSEG-BELNR.
IT_ITAB-GJAHR = IT_BSEG-GJAHR.
IT_ITAB-SHKZG = IT_BSEG-SHKZG.
IT_ITAB-GSBER = IT_BSEG-GSBER.
IT_ITAB-DMBTR = IT_BSEG-DMBTR.
IT_ITAB-WRBTR = IT_BSEG-WRBTR.
IT_ITAB-SGTXT = IT_BSEG-SGTXT.
IT_ITAB-BUZEI = IT_BSEG-BUZEI.
IT_ITAB-BUZID = IT_BSEG-BUZID.
IT_ITAB-AUGDT = IT_BSEG-AUGDT.
IT_ITAB-AUGCP = IT_BSEG-AUGCP.
IT_ITAB-AUGBL = IT_BSEG-AUGBL.
IT_ITAB-BSCHL = IT_BSEG-BSCHL.
IT_ITAB-KOART = IT_BSEG-KOART.
IT_ITAB-UMSKZ = IT_BSEG-UMSKZ.
IT_ITAB-ZUONR = IT_BSEG-ZUONR.
IT_ITAB-SAKNR = IT_BSEG-SAKNR.
IT_ITAB-HKONT = IT_BSEG-HKONT.
READ TABLE IT_LFA1 WITH KEY LIFNR = IT_ITAB-LIFNR.
IF SY-SUBRC = 0.
IT_ITAB-LAND1 = IT_LFA1-LAND1.
IT_ITAB-NAME1 = IT_LFA1-NAME1.
ENDIF.
READ TABLE IT_LFC1 WITH KEY LIFNR = IT_ITAB-LIFNR
BUKRS = IT_ITAB-BUKRS
GJAHR = IT_ITAB-GJAHR
BINARY SEARCH.
IF SY-SUBRC = 0.
IT_ITAB-UMSAV = IT_LFC1-UMSAV.
ENDIF.
READ TABLE IT_BKPF WITH KEY BUKRS = IT_ITAB-BUKRS
BELNR = IT_ITAB-BELNR
GJAHR = IT_ITAB-GJAHR.
IF SY-SUBRC = 0.
IT_ITAB-BLART = IT_BKPF-BLART.
IT_ITAB-BUDAT = IT_BKPF-BUDAT.
IT_ITAB-BLDAT = IT_BKPF-BLDAT.
IT_ITAB-MONAT = IT_BKPF-MONAT.
IT_ITAB-USNAM = IT_BKPF-USNAM.
IT_ITAB-XBLNR = IT_BKPF-XBLNR.
ENDIF.
APPEND IT_ITAB.
CLEAR IT_ITAB.
ENDLOOP.
endform. " DATA_RETRIVE
*& Form SUB_CALC
text
--> p1 text
<-- p2 text
form SUB_CALC .
*SORT IT_ITAB BY LIFNR GSBER GJAHR.
*LOOP AT IT_ITAB.
*IF IT_ITAB-SHKZG = 'S'.
IT_ITAB-DMBTR = IT_ITAB-DMBTR * ( -1 ).
*ENDIF.
*CLEAR IT_ITAB-DMBTR_S.
*MODIFY IT_ITAB.
*ENDLOOP.
*LOOP AT IT_ITAB.
*IT_ITAB-BAL = IT_ITAB-UMSAV + IT_ITAB-DMBTR.
*MODIFY IT_ITAB.
*CLEAR IT_ITAB.
*ENDLOOP.
*LOOP AT IT_ITAB.
IF IT_ITAB-SHKZG = 'S'.
IT_ITAB-DMBTR = IT_ITAB-DMBTR * ( -1 ).
ENDIF.
MODIFY IT_ITAB.
*ENDLOOP.
LOOP AT IT_ITAB.
IF IT_ITAB-SHKZG = 'S'.
IT_ITAB-DMBTR_S = IT_ITAB-DMBTR .
ELSE.
IF IT_ITAB-SHKZG = 'H'.
IT_ITAB-DMBTR_H = IT_ITAB-DMBTR.
ENDIF.
ENDIF.
IT_ITAB-DMBTR = ''.
MODIFY IT_ITAB INDEX SY-TABIX TRANSPORTING DMBTR_H DMBTR_S DMBTR.
"VAR.
CLEAR IT_ITAB.
ENDLOOP.
*MOVE CORRESPONDING IT_LFC1-UMSAV = IT_ITAB-UMSAV.
SORT IT_ITAB BY LIFNR GSBER.
LOOP AT IT_ITAB.
IT_ITAB-DMBTR_H = IT_ITAB-DMBTR_H.
IT_ITAB-DMBTR_S = IT_ITAB-DMBTR_S.
IT_ITAB-DH = IT_ITAB-DMBTR_H.
IT_ITAB-DS = IT_ITAB-DMBTR_S.
IT_ITAB-FLAG = 'X'.
IT_ITAB-CTR = 'X'.
IT_ITAB-HS = IT_ITAB-DMBTR_H - IT_ITAB-DMBTR_S.
IT_ITAB-BAL = IT_ITAB-UMSAV + IT_ITAB-HS.
MODIFY IT_ITAB INDEX SY-TABIX TRANSPORTING DMBTR_H DMBTR_S HS
FLAG BAL.
CLEAR IT_ITAB.
ENDLOOP.
*LOOP AT IT_ITAB.
**IF IT_ITAB-MONAT = ''.
DELETE IT_ITAB[] WHERE MONAT = ''.
*MODIFY IT_ITAB.
*ENDLOOP.
LOOP AT IT_ITAB.
AT END OF GSBER.
SUM.
IT_ITAB-DMBTR_H = IT_ITAB-DMBTR_H.
IT_ITAB-DMBTR_S = IT_ITAB-DMBTR_S.
IT_ITAB-DH = IT_ITAB-DMBTR_H.
IT_ITAB-DS = IT_ITAB-DMBTR_S.
IT_ITAB-FLAG = 'X'.
IT_ITAB-CTR = 'X'.
IT_ITAB-DMBTR_H = IT_ITAB-DMBTR_H.
IT_ITAB-DMBTR_S = IT_ITAB-DMBTR_S.
IT_ITAB-HS = IT_ITAB-DMBTR_S - IT_ITAB-DMBTR_H.
IT_ITAB-BAL = IT_ITAB-UMSAV - IT_ITAB-HS.
MODIFY IT_ITAB INDEX SY-TABIX TRANSPORTING DMBTR_H DMBTR_S HS
FLAG BAL.
ENDAT.
CLEAR IT_ITAB.
ENDLOOP.
LOOP AT IT_ITAB.
AT END OF GSBER.
SUM.
IT_ITAB-DMBTR_H = IT_ITAB-DMBTR_H.
IT_ITAB-DMBTR_S = IT_ITAB-DMBTR_S.
IT_ITAB-DH = IT_ITAB-DMBTR_H.
IT_ITAB-DS = IT_ITAB-DMBTR_S.
IT_ITAB-FLAG = 'X'.
IT_ITAB-CTR = 'X'.
IT_ITAB-DMBTR_H = IT_ITAB-DMBTR_H.
IT_ITAB-DMBTR_S = IT_ITAB-DMBTR_S.
IT_ITAB-BAL = IT_ITAB-UMSAV + ( IT_ITAB-DMBTR_H - IT_ITAB-DMBTR_S ).
MODIFY IT_ITAB INDEX SY-TABIX TRANSPORTING DMBTR_H DMBTR_S DH DS
FLAG BAL.
ENDAT.
CLEAR IT_ITAB.
ENDLOOP.
DELETE IT_ITAB[] WHERE FLAG <> 'X'.
SORT IT_ITAB BY LIFNR GSBER.
LOOP AT IT_ITAB.
MOVE-CORRESPONDING IT_ITAB TO IT_TEMP.
APPEND IT_TEMP.
ENDLOOP.
REFRESH IT_ITAB.
SORT IT_TEMP BY LIFNR GSBER.
LOOP AT IT_TEMP.
MOVE-CORRESPONDING IT_TEMP TO IT_ITAB.
APPEND IT_ITAB.
CLEAR IT_ITAB.
AT END OF LIFNR.
SUM.
IT_TEMP-FLAG = ''.
MODIFY IT_TEMP INDEX SY-TABIX TRANSPORTING DMBTR_H DMBTR_S FLAG.
MOVE-CORRESPONDING IT_ITEMP TO IT_ITAB.
IT_ITAB-LIFNR = ''.
IT_ITAB-NAME1 = ''.
IT_ITAB-BELNR = ''.
IT_ITAB-BUKRS = ''.
IT_ITAB-GJAHR = ''.
IT_ITAB-GSBER = ''.
IT_ITAB-UMSAV = '0000'.
IT_ITAB-DMBTR_H = IT_TEMP-DMBTR_H.
IT_ITAB-DMBTR_S = IT_TEMP-DMBTR_S.
IT_ITAB-BAL = IT_TEMP-DMBTR_H - IT_TEMP-DMBTR_S.
IT_ITAB-FLAG = 'Y'.
IT_ItAB-CTR = IT_TEMO-CTR.
APPEND IT_ITAB.
ENDAT.
IF IT_ITAB-FLAG = 'Y'.
it_itab-line_color = 'C600'.
MODIFY IT_ITAB.
ENDIF.
CLEAR IT_TEMP.
ENDLOOP.
LOOP AT IT_ITAB WHERE FLAG = 'Y'.
it_itab-line_color = 'C602'.
MODIFY IT_ITAB INDEX SY-TABIX.
CLEAR IT_ITAB.
ENDLOOP.
loop at it_itab WHERE FLAG = ''.
it_itab-line_color = 'C103'.
IT_ITAB-LINE_CTR = 'C103'.
MODIFY IT_ITAB INDEX SY-TABIX.
CLEAR IT_ITAB.
ENDLOOP.
PERFORM SUB_CALC_1.
endform. " SUB_CALC
*& Form SUB_FIELDCAT
text
--> p1 text
<-- p2 text
FORM SUB_FIELDCAT .
WA_FCAT-FIELDNAME = 'LIFNR'.
WA_FCAT-TABNAME = 'IT_ITAB'.
WA_FCAT-SELTEXT_M = 'Vendor No'. "'VENDOR NAME'.
APPEND WA_FCAT TO IT_FCAT.
CLEAR WA_FCAT.
WA_FCAT-FIELDNAME = 'NAME1'.
WA_FCAT-TABNAME = 'IT_ITAB'.
WA_FCAT-SELTEXT_M = 'Vendor Name'. "'VENDOR NAME'.
APPEND WA_FCAT TO IT_FCAT.
CLEAR WA_FCAT.
WA_FCAT-FIELDNAME = 'BELNR'.
WA_FCAT-TABNAME = 'IT_ITAB'.
WA_FCAT-SELTEXT_M = 'SAP Document No'. "'DOC NUMBER'.
APPEND WA_FCAT TO IT_FCAT.
CLEAR WA_FCAT.
WA_FCAT-FIELDNAME = 'BLDAT'.
WA_FCAT-TABNAME = 'IT_ITAB'.
WA_FCAT-SELTEXT_M = 'Doc Date'. "'FISCAL YEAR'.
APPEND WA_FCAT TO IT_FCAT.
CLEAR wa_fcat.
WA_FCAT-FIELDNAME = 'GSBER'.
WA_FCAT-TABNAME = 'IT_ITAB'.
WA_FCAT-SELTEXT_M = 'BusA'. "'BUSINESS AREA'.
APPEND WA_FCAT TO IT_FCAT.
CLEAR WA_FCAT.
WA_FCAT-FIELDNAME = 'UMSAV'.
WA_FCAT-TABNAME = 'IT_ITAB'.
WA_FCAT-SELTEXT_M = 'Balance Carry Forward'. "'BAL CARRIED FORWARD'.
APPEND WA_FCAT TO IT_FCAT.
CLEAR WA_FCAT.
WA_FCAT-FIELDNAME = 'FLAG'.
WA_FCAT-TABNAME = 'IT_ITAB'.
WA_FCAT-SELTEXT_M = 'FLAG'. "'DOC NUMBER'.
APPEND WA_FCAT TO IT_FCAT.
CLEAR WA_FCAT.
WA_FCAT-FIELDNAME = 'SHKZG'.
WA_FCAT-TABNAME = 'IT_ITAB'.
WA_FCAT-SELTEXT_M = 'SHKZG'. "'DOC NUMBER'.
APPEND WA_FCAT TO IT_FCAT.
CLEAR WA_FCAT.
WA_FCAT-FIELDNAME = 'DMBTR_S'.
WA_FCAT-TABNAME = 'IT_ITAB'.
WA_FCAT-SELTEXT_M = 'Credit'. "'DOC NUMBER'.
APPEND WA_FCAT TO IT_FCAT.
CLEAR WA_FCAT.
WA_FCAT-FIELDNAME = 'DMBTR_H'.
WA_FCAT-TABNAME = 'IT_ITAB'.
WA_FCAT-SELTEXT_M = 'Debit'. "'DOC NUMBER'.
APPEND WA_FCAT TO IT_FCAT.
CLEAR WA_FCAT.
WA_FCAT-FIELDNAME = 'MONAT'.
WA_FCAT-TABNAME = 'IT_ITAB'.
WA_FCAT-SELTEXT_M = 'PERIOD'.
APPEND WA_FCAT TO IT_FCAT.
CLEAR WA_FCAT.
WA_FCAT-FIELDNAME = 'DH'.
WA_FCAT-TABNAME = 'IT_ITAB'.
WA_FCAT-SELTEXT_M = 'DH'. "'DOC NUMBER'.
APPEND WA_FCAT TO IT_FCAT.
CLEAR WA_FCAT.
WA_FCAT-FIELDNAME = 'DS'.
WA_FCAT-TABNAME = 'IT_ITAB'.
WA_FCAT-SELTEXT_M = 'DS'. "'DOC NUMBER'.
APPEND WA_FCAT TO IT_FCAT.
CLEAR WA_FCAT.
WA_FCAT-FIELDNAME = 'BAL'.
WA_FCAT-TABNAME = 'IT_ITAB'.
WA_FCAT-SELTEXT_M = 'Accumlated Bal'.
APPEND WA_FCAT TO IT_FCAT.
CLEAR WA_FCAT.
WA_FCAT-FIELDNAME = 'SGTXT'.
WA_FCAT-TABNAME = 'IT_ITAB'.
WA_FCAT-SELTEXT_M = 'Text'. "'DOC NUMBER'.
APPEND WA_FCAT TO IT_FCAT.
CLEAR WA_FCAT.
ls_layout-info_fieldname = 'LINE_COLOR'.
ENDFORM. " SUB_FIELDCAT
*& Form SUB_DISPLAY
text
--> p1 text
<-- p2 text
FORM SUB_DISPLAY .
IF NOT IT_ITAB[] IS INITIAL.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'SY-REPID'
IT_FIELDCAT = IT_FCAT
I_SAVE = 'A'
is_layout = ls_layout
TABLES
T_OUTTAB = IT_ITAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. " SUB_DISPLAY
*& Form SUB_CALC_1
text
--> p1 text
<-- p2 text
FORM SUB_CALC_1 .
LOOP AT IT_ITAB WHERE FLAG = 'Y'.
it_itab-line_color = 'C603'.
MODIFY IT_ITAB INDEX SY-TABIX.
CLEAR IT_ITAB.
ENDLOOP.
ENDFORM. " SUB_CALC_1This is the Report which i am trying to do....please help me with this Report....
*& Report ZVENDOR_RECONCILLATION
REPORT ZVENDOR_RECONCILLATION.
*ALV
TYPE-POOLS: SLIS.
*TYPE-POOLS icon.
DATA: It_SORT TYPE SLIS_T_SORTINFO_ALV ."WITH HEADER LINE.
DATA: TOP TYPE slis_t_listheader,
END TYPE slis_t_listheader,
EVENTS TYPE slis_t_event.
DATA : NAME1 LIKE T001W-NAME1,
WERKS LIKE T001W-WERKS .
DATA : T_KEY TYPE SLIS_KEYINFO_ALV.
DATA : FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
LAYOUT TYPE SLIS_LAYOUT_ALV OCCURS 1 WITH HEADER LINE ,
LCAT TYPE SLIS_FIELDCAT_ALV.
TABLES : BSAK , BSIK , LFC1 , LFC3 , LFA1.
*INTERNAL TABLE
DATA: BEGIN OF sd_bsak,
bukrs TYPE bsak-bukrs,
lifnr TYPE bsak-lifnr,
umsks TYPE bsak-umsks,
umskz TYPE bsak-umskz,
augdt TYPE bsak-augdt,
augbl TYPE bsak-augbl,
zuonr TYPE bsak-zuonr,
gjahr TYPE bsak-gjahr,
belnr TYPE bsak-belnr,
buzei TYPE bsak-buzei,
budat TYPE bsak-budat,
bldat TYPE bsak-bldat,
xblnr TYPE bsak-xblnr,
blart TYPE bsak-blart,
monat TYPE bsak-monat,
bschl TYPE bsak-bschl,
zumsk TYPE bsak-zumsk,
shkzg TYPE bsak-shkzg,
gsber TYPE bsak-gsber,
dmbtr TYPE bsak-dmbtr,
wrbtr TYPE bsak-wrbtr,
sgtxt TYPE bsak-sgtxt,
saknr TYPE bsak-saknr,
hkont TYPE bsak-hkont,
END OF sd_bsak.
DATA: BEGIN OF sd_bsik,
bukrs TYPE bsik-bukrs,
lifnr TYPE bsik-lifnr,
umsks TYPE bsik-umsks,
umskz TYPE bsik-umskz,
augdt TYPE bsik-augdt,
augbl TYPE bsik-augbl,
zuonr TYPE bsik-zuonr,
gjahr TYPE bsik-gjahr,
belnr TYPE bsik-belnr,
buzei TYPE bsik-buzei,
budat TYPE bsik-budat,
bldat TYPE bsik-bldat,
xblnr TYPE bsik-xblnr,
blart TYPE bsik-blart,
monat TYPE bsik-monat,
bschl TYPE bsik-bschl,
zumsk TYPE bsik-zumsk,
shkzg TYPE bsik-shkzg,
gsber TYPE bsik-gsber,
dmbtr TYPE bsik-dmbtr,
wrbtr TYPE bsik-wrbtr,
sgtxt TYPE bsik-sgtxt,
saknr TYPE bsik-saknr,
hkont TYPE bsik-hkont,
zlsch TYPE bsik-zlsch,
END OF sd_bsik.
DATA: BEGIN OF it_lfa1,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
END OF it_lfa1.
DATA: BEGIN OF sd_lfc1,
lifnr TYPE lfc1-lifnr,
bukrs TYPE lfc1-bukrs,
gjahr TYPE lfc1-gjahr,
erdat TYPE lfc1-erdat,
usnam TYPE lfc1-usnam,
umsav TYPE lfc1-umsav,
END OF sd_lfc1.
DATA: BEGIN OF sd_lfc3,
lifnr TYPE lfc3-lifnr,
bukrs TYPE lfc3-bukrs,
gjahr TYPE lfc3-gjahr,
shbkz TYPE lfc3-shbkz,
saldv TYPE lfc3-saldv,
solll TYPE lfc3-solll,
habnl TYPE lfc3-habnl,
END OF sd_lfc3.
*FINAL INTERNAL TABLE DECLARATION
DATA: BEGIN OF IT_FINAL,
gsber TYPE bsak-gsber,
bukrs TYPE bsak-bukrs,
lifnr TYPE bsak-lifnr,
umsks TYPE bsak-umsks,
umskz TYPE bsak-umskz,
augdt TYPE bsak-augdt,
augbl TYPE bsak-augbl,
zuonr TYPE bsak-zuonr,
gjahr TYPE bsak-gjahr,
belnr TYPE bsak-belnr,
buzei TYPE bsak-buzei,
budat TYPE bsak-budat,
bldat TYPE bsak-bldat,
xblnr TYPE bsak-xblnr,
blart TYPE bsak-blart,
monat TYPE bsak-monat,
bschl TYPE bsak-bschl,
zumsk TYPE bsak-zumsk,
shkzg TYPE bsak-shkzg,
gsber TYPE bsak-gsber,
dmbtr TYPE bsak-dmbtr,
wrbtr TYPE bsak-wrbtr,
sgtxt TYPE bsak-sgtxt,
saknr TYPE bsak-saknr,
hkont TYPE bsak-hkont,
DMBTR_S TYPE BSAK-DMBTR,
DMBTR_H TYPE BSAK-DMBTR,
DS TYPE P DECIMALS 2,
DH TYPE P DECIMALS 2,
SUB TYPE P DECIMALS 2,
ADD TYPE P DECIMALS 2,
BAL TYPE P DECIMALS 2,
lifnr TYPE bsik-lifnr,
umsks TYPE bsik-umsks,
umskz TYPE bsik-umskz,
augdt TYPE bsik-augdt,
augbl TYPE bsik-augbl,
zuonr TYPE bsik-zuonr,
gjahr TYPE bsik-gjahr,
belnr TYPE bsik-belnr,
buzei TYPE bsik-buzei,
budat TYPE bsik-budat,
bldat TYPE bsik-bldat,
xblnr TYPE bsik-xblnr,
blart TYPE bsik-blart,
monat TYPE bsik-monat,
bschl TYPE bsik-bschl,
zumsk TYPE bsik-zumsk,
shkzg TYPE bsik-shkzg,
gsber TYPE bsik-gsber,
dmbtr TYPE bsik-dmbtr,
wrbtr TYPE bsik-wrbtr,
sgtxt TYPE bsik-sgtxt,
saknr TYPE bsik-saknr,
hkont TYPE bsik-hkont,
zlsch TYPE bsik-zlsch,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
lifnr TYPE lfc1-lifnr,
bukrs TYPE lfc1-bukrs,
gjahr TYPE lfc1-gjahr,
erdat TYPE lfc1-erdat,
usnam TYPE lfc1-usnam,
umsav TYPE lfc1-umsav,
lifnr TYPE lfc3-lifnr,
bukrs TYPE lfc3-bukrs,
gjahr TYPE lfc3-gjahr,
shbkz TYPE lfc3-shbkz,
saldv TYPE lfc3-saldv,
solll TYPE lfc3-solll,
habnl TYPE lfc3-habnl,
END OF IT_FINAL.
DATA: BEGIN OF SD_FINAL,
lifnr TYPE bsak-lifnr,
bukrs TYPE bsak-bukrs,
lifnr TYPE bsak-lifnr,
umsks TYPE bsak-umsks,
umskz TYPE bsak-umskz,
augdt TYPE bsak-augdt,
augbl TYPE bsak-augbl,
zuonr TYPE bsak-zuonr,
gjahr TYPE bsak-gjahr,
belnr TYPE bsak-belnr,
buzei TYPE bsak-buzei,
budat TYPE bsak-budat,
bldat TYPE bsak-bldat,
xblnr TYPE bsak-xblnr,
blart TYPE bsak-blart,
monat TYPE bsak-monat,
bschl TYPE bsak-bschl,
zumsk TYPE bsak-zumsk,
shkzg TYPE bsak-shkzg,
gsber TYPE bsak-gsber,
dmbtr TYPE bsak-dmbtr,
wrbtr TYPE bsak-wrbtr,
sgtxt TYPE bsak-sgtxt,
saknr TYPE bsak-saknr,
hkont TYPE bsak-hkont,
bukrs TYPE bsik-bukrs,
lifnr TYPE bsik-lifnr,
umsks TYPE bsik-umsks,
umskz TYPE bsik-umskz,
augdt TYPE bsik-augdt,
augbl TYPE bsik-augbl,
zuonr TYPE bsik-zuonr,
gjahr TYPE bsik-gjahr,
belnr TYPE bsik-belnr,
buzei TYPE bsik-buzei,
budat TYPE bsik-budat,
bldat TYPE bsik-bldat,
xblnr TYPE bsik-xblnr,
blart TYPE bsik-blart,
monat TYPE bsik-monat,
bschl TYPE bsik-bschl,
zumsk TYPE bsik-zumsk,
shkzg TYPE bsik-shkzg,
gsber TYPE bsik-gsber,
dmbtr TYPE bsik-dmbtr,
wrbtr TYPE bsik-wrbtr,
sgtxt TYPE bsik-sgtxt,
saknr TYPE bsik-saknr,
hkont TYPE bsik-hkont,
zlsch TYPE bsik-zlsch,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
lifnr TYPE lfc1-lifnr,
bukrs TYPE lfc1-bukrs,
gjahr TYPE lfc1-gjahr,
erdat TYPE lfc1-erdat,
usnam TYPE lfc1-usnam,
umsav TYPE lfc1-umsav,
lifnr TYPE lfc3-lifnr,
bukrs TYPE lfc3-bukrs,
gjahr TYPE lfc3-gjahr,
shbkz TYPE lfc3-shbkz,
saldv TYPE lfc3-saldv,
solll TYPE lfc3-solll,
habnl TYPE lfc3-habnl,
line_color(4) TYPE c,
END OF SD_FINAL.
DATA IT_STD_BSAK LIKE TABLE OF SD_BSAK WITH HEADER LINE.
DATA IT_STD_BSIK LIKE TABLE OF SD_BSIK WITH HEADER LINE.
DATA IT_STD_LFA1 LIKE TABLE OF IT_LFA1 WITH HEADER LINE.
DATA IT_STD_LFC1 LIKE TABLE OF SD_LFC1 WITH HEADER LINE.
DATA IT_STD_LFC3 LIKE TABLE OF SD_LFC3 WITH HEADER LINE.
DATA IT_STD_FINAL LIKE TABLE OF IT_FINAL WITH HEADER LINE.
DATA IT_FINAL_DISPLAY LIKE TABLE OF SD_FINAL WITH HEADER LINE.
*SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK HEADER WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSAK-BUKRS OBLIGATORY,
P_GJAHR LIKE BSAK-GJAHR OBLIGATORY.
P_EBELN LIKE EKPO-EBELN .
*PARAMETER: PA_RPT AS CHECKBOX DEFAULT 'X'.
SELECT-OPTIONS: S_LIFNR FOR BSAK-LIFNR.
SELECT-OPTIONS: S_MONAT FOR BSAK-MONAT.
SELECTION-SCREEN END OF BLOCK HEADER.
START-OF-SELECTION.
SET PF-STATUS 'STATUS'.
PERFORM DATA_RETRIVAL.
PERFORM FIELD.
PERFORM SORT USING IT_SORT.
PERFORM EVENTS USING EVENTS.
PERFORM EVENTS_1 USING EVENTS.
PERFORM HEADER USING TOP.
PERFORM LAYOUT.
PERFORM DISPLAY.
END-OF-PAGE.
*& Form DATA_RETRIVAL
text
--> p1 text
<-- p2 text
FORM DATA_RETRIVAL .
SELECT BUKRS LIFNR UMSKS UMSKZ AUGDT AUGBL ZUONR GJAHR BELNR BUZEI BUDAT BLDAT XBLNR BLART
MONAT BSCHL ZUMSK SHKZG GSBER DMBTR WRBTR SGTXT SAKNR HKONT
FROM BSAK INTO TABLE IT_STD_BSAK
WHERE BUKRS = P_BUKRS
AND GJAHR = P_GJAHR AND ZUMSK = ''
AND LIFNR IN S_LIFNR
AND MONAT IN S_MONAT.
IF NOT IT_STD_BSAK[] IS INITIAL.
SELECT BUKRS LIFNR UMSKS UMSKZ AUGDT AUGBL ZUONR GJAHR BELNR BUZEI BUDAT BLDAT XBLNR
BLART MONAT BSCHL ZUMSK SHKZG GSBER DMBTR WRBTR SGTXT SAKNR HKONT ZLSCH
FROM BSIK INTO TABLE IT_STD_BSIK FOR ALL ENTRIES IN IT_STD_BSAK
WHERE BUKRS = IT_STD_BSAK-BUKRS AND LIFNR = IT_STD_BSAK-LIFNR AND GJAHR = IT_STD_BSAK-GJAHR AND ZUMSK = ''.
ENDIF.
IF NOT IT_STD_BSAK[] IS INITIAL.
SELECT LIFNR NAME1
FROM LFA1 INTO TABLE IT_STD_LFA1 FOR ALL ENTRIES IN IT_STD_BSAK
WHERE LIFNR = IT_STD_BSAK-LIFNR.
ENDIF.
IF NOT IT_STD_BSAK[] IS INITIAL.
SELECT LIFNR BUKRS GJAHR ERDAT USNAM UMSAV
FROM LFC1 INTO TABLE IT_STD_LFC1 FOR ALL ENTRIES IN IT_STD_BSAK
WHERE LIFNR = IT_STD_BSAK-LIFNR AND BUKRS = IT_STD_BSAK-BUKRS AND GJAHR = IT_STD_BSAK-GJAHR.
ENDIF.
IF NOT IT_STD_BSAK[] IS INITIAL.
SELECT LIFNR BUKRS GJAHR SHBKZ SALDV SOLLL HABNL
FROM LFC3 INTO TABLE IT_STD_LFC3 FOR ALL ENTRIES IN IT_STD_BSAK
WHERE LIFNR = IT_STD_BSAK-LIFNR AND BUKRS = IT_STD_BSAK-BUKRS AND GJAHR = IT_STD_BSAK-GJAHR.
ENDIF.
LOOP AT IT_STD_BSAK.
IT_STD_FINAL-BUKRS = IT_STD_BSAK-BUKRS.
IT_STD_FINAL-LIFNR = IT_STD_BSAK-LIFNR.
IT_STD_FINAL-UMSKS = IT_STD_BSAK-UMSKS.
IT_STD_FINAL-UMSKZ = IT_STD_BSAK-UMSKZ.
IT_STD_FINAL-AUGDT = IT_STD_BSAK-AUGDT.
IT_STD_FINAL-AUGBL = IT_STD_BSAK-AUGBL.
IT_STD_FINAL-ZUONR = IT_STD_BSAK-ZUONR.
IT_STD_FINAL-GJAHR = IT_STD_BSAK-GJAHR.
IT_STD_FINAL-BELNR = IT_STD_BSAK-BELNR.
IT_STD_FINAL-BUZEI = IT_STD_BSAK-BUZEI.
IT_STD_FINAL-BUDAT = IT_STD_BSAK-BUDAT.
IT_STD_FINAL-BLDAT = IT_STD_BSAK-BLDAT.
IT_STD_FINAL-XBLNR = IT_STD_BSAK-XBLNR.
IT_STD_FINAL-BLART = IT_STD_BSAK-BLART.
IT_STD_FINAL-MONAT = IT_STD_BSAK-MONAT.
IT_STD_FINAL-BSCHL = IT_STD_BSAK-BSCHL.
IT_STD_FINAL-ZUMSK = IT_STD_BSAK-ZUMSK.
IT_STD_FINAL-SHKZG = IT_STD_BSAK-SHKZG.
IT_STD_FINAL-GSBER = IT_STD_BSAK-GSBER.
IT_STD_FINAL-DMBTR = IT_STD_BSAK-DMBTR.
IT_STD_FINAL-WRBTR = IT_STD_BSAK-WRBTR.
IT_STD_FINAL-SGTXT = IT_STD_BSAK-SGTXT.
IT_STD_FINAL-SAKNR = IT_STD_BSAK-SAKNR.
IT_STD_FINAL-HKONT = IT_STD_BSAK-HKONT.
READ TABLE IT_STD_LFA1 WITH KEY LIFNR = IT_STD_FINAL-LIFNR.
IF SY-SUBRC = 0.
IT_STD_FINAL-NAME1 = IT_STD_LFA1-NAME1.
ENDIF.
READ TABLE IT_STD_LFC1 WITH KEY LIFNR = IT_STD_FINAL-LIFNR
BUKRS = IT_STD_FINAL-BUKRS
GJAHR = IT_STD_FINAL-GJAHR.
IF SY-SUBRC = 0.
IT_STD_FINAL-ERDAT = IT_STD_LFC1-ERDAT.
IT_STD_FINAL-USNAM = IT_STD_LFC1-USNAM.
IT_STD_FINAL-UMSAV = IT_STD_LFC1-UMSAV.
ENDIF.
*READ TABLE IT_STD_LFC3 WITH KEY LIFNR = IT_STD_FINAL-LIFNR
BUKRS = IT_STD_FINAL-BUKRS
GJAHR = IT_STD_FINAL-GJAHR.
IF SY-SUBRC = 0.
IT_STD_FINAL-SHBKZ = IT_STD_LFC3-SHBKZ.
IT_STD_FINAL-SALDV = IT_STD_LFC3-SALDV.
IT_STD_FINAL-SOLLL = IT_STD_LFC3-SOLLL.
IT_STD_FINAL-HABNL = IT_STD_LFC3-HABNL.
ENDIF.
APPEND IT_STD_FINAL.
CLEAR IT_STD_FINAL.
ENDLOOP.
LOOP AT IT_STD_BSIK.
IF SY-SUBRC = 0.
IT_STD_FINAL-BUKRS = IT_STD_BSIK-BUKRS.
IT_STD_FINAL-LIFNR = IT_STD_BSIK-LIFNR.
IT_STD_FINAL-UMSKS = IT_STD_BSIK-UMSKS.
IT_STD_FINAL-UMSKZ = IT_STD_BSIK-UMSKZ.
IT_STD_FINAL-AUGDT = IT_STD_BSIK-AUGDT.
IT_STD_FINAL-AUGBL = IT_STD_BSIK-AUGBL.
IT_STD_FINAL-ZUONR = IT_STD_BSIK-ZUONR.
IT_STD_FINAL-GJAHR = IT_STD_BSIK-GJAHR.
IT_STD_FINAL-BELNR = IT_STD_BSIK-BELNR.
IT_STD_FINAL-BUZEI = IT_STD_BSIK-BUZEI.
IT_STD_FINAL-BUDAT = IT_STD_BSIK-BUDAT.
IT_STD_FINAL-BLDAT = IT_STD_BSIK-BLDAT.
IT_STD_FINAL-XBLNR = IT_STD_BSIK-XBLNR.
IT_STD_FINAL-BLART = IT_STD_BSIK-BLART.
IT_STD_FINAL-MONAT = IT_STD_BSIK-MONAT.
IT_STD_FINAL-BSCHL = IT_STD_BSIK-BSCHL.
IT_STD_FINAL-ZUMSK = IT_STD_BSIK-ZUMSK.
IT_STD_FINAL-SHKZG = IT_STD_BSIK-SHKZG.
IT_STD_FINAL-GSBER = IT_STD_BSIK-GSBER.
IT_STD_FINAL-DMBTR = IT_STD_BSIK-DMBTR.
IT_STD_FINAL-WRBTR = IT_STD_BSIK-WRBTR.
IT_STD_FINAL-SGTXT = IT_STD_BSIK-SGTXT.
IT_STD_FINAL-SAKNR = IT_STD_BSIK-SAKNR.
IT_STD_FINAL-HKONT = IT_STD_BSIK-HKONT.
IT_STD_FINAL-ZLSCH = IT_STD_BSIK-ZLSCH.
ENDIF.
APPEND IT_STD_FINAL.
CLEAR IT_STD_FINAL.
ENDLOOP.
LOOP AT IT_STD_LFC3.
IF SY-SUBRC = 0.
IT_STD_FINAL-SHBKZ = IT_STD_LFC3-SHBKZ.
IT_STD_FINAL-SALDV = IT_STD_LFC3-SALDV.
IT_STD_FINAL-SOLLL = IT_STD_LFC3-SOLLL.
IT_STD_FINAL-HABNL = IT_STD_LFC3-HABNL.
ENDIF.
APPEND IT_STD_FINAL.
CLEAR IT_STD_FINAL.
ENDLOOP.
LOOP AT IT_STD_FINAL.
IF IT_STD_FINAL-SHKZG = 'S'.
IT_STD_FINAL-DMBTR_S = IT_STD_FINAL-DMBTR.
ELSE.
IF IT_STD_FINAL-SHKZG = 'H'.
IT_STD_FINAL-DMBTR_H = IT_STD_FINAL-DMBTR.
ENDIF.
ENDIF.
IT_STD_FINAL-DMBTR = ''.
MODIFY IT_STD_FINAL INDEX SY-TABIX TRANSPORTING DMBTR_H DMBTR_S DMBTR.
"VAR.
CLEAR IT_STD_FINAL.
ENDLOOP.
LOOP AT IT_STD_LFC3.
*AT NEW LIFNR.
IF SY-SUBRC = 0.
IT_STD_FINAL-LIFNR = IT_STD_LFC3-LIFNR.
IT_STD_FINAL-BUKRS = IT_STD_LFC3-BUKRS.
IT_STD_FINAL-GJAHR = IT_STD_LFC3-GJAHR.
IT_STD_FINAL-SHBKZ = IT_STD_LFC3-SHBKZ.
IT_STD_FINAL-UMSAV = IT_STD_LFC3-SALDV.
IT_STD_FINAL-DMBTR_S = IT_STD_LFC3-SOLLL.
IT_STD_FINAL-DMBTR_H = IT_STD_LFC3-HABNL.
ENDIF.
*ENDAT.
APPEND IT_STD_FINAL.
CLEAR IT_STD_FINAL.
ENDLOOP.
LOOP AT IT_STD_FINAL.
IT_STD_FINAL-DS = IT_STD_FINAL-DMBTR_S.
IT_STD_FINAL-DH = IT_STD_FINAL-DMBTR_H.
IT_STD_FINAL-SUB = ( IT_STD_FINAL-DS ) - ( IT_STD_FINAL-DH ).
IT_STD_FINAL-ADD = ( IT_STD_FINAL-UMSAV ) + ( IT_STD_FINAL-SUB ).
MODIFY IT_STD_FINAL.
ENDLOOP.
ENDFORM. " DATA_RETRIVAL
*& Form FIELD
text
--> p1 text
<-- p2 text
form FIELD .
LCAT-FIELDNAME = 'LIFNR'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Vendor No'.
*LCAT-REF_TABNAME = 'EKKO'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'NAME1'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Vendor Name'.
*LCAT-REF_TABNAME = 'EKKO'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'GJAHR'. "MATERIAL GROUP
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Fiscal Year'.
*LCAT-REF_TABNAME = 'LFA1'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'GSBER'. "MATERIAL GROUP
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'BussArea'.
*LCAT-REF_TABNAME = 'LFA1'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'SHBKZ'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'S G/L'.
LCAT-REF_TABNAME = 'LFC3'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'UMSAV'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Bal Carry Forward'.
*LCAT-REF_TABNAME = 'EKKO'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'DMBTR_S'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Debit Balanace'.
*LCAT-REF_TABNAME = 'EKKO'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'DMBTR_H'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Credit Balance'.
*LCAT-REF_TABNAME = 'EKKO'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'ADD'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Accumulated Balance'.
*LCAT-REF_TABNAME = 'EKKO'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LOOP AT FIELDCAT INTO LCAT WHERE FIELDNAME = 'DMBTR_S'.
LCAT-DO_SUM = 'X'.
MODIFY FIELDCAT FROM LCAT." TRANSPORTING DO_SUM.
ENDLOOP.
LOOP AT FIELDCAT INTO LCAT WHERE FIELDNAME = 'DMBTR_H'.
LCAT-DO_SUM = 'X'.
MODIFY FIELDCAT FROM LCAT." TRANSPORTING DO_SUM.
ENDLOOP.
LOOP AT FIELDCAT INTO LCAT WHERE FIELDNAME = 'ADD'.
LCAT-DO_SUM = 'X'.
MODIFY FIELDCAT FROM LCAT." TRANSPORTING DO_SUM.
ENDLOOP.
endform. " FIELD
*& Form DISPLAY
text
--> p1 text
<-- p2 text
form DISPLAY .
CLEAR: IT_STD_BSAK,IT_STD_BSIK, IT_STD_LFA1 , IT_STD_LFC1, IT_STD_LFC3.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'STATUS '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = IT_SORT
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = IT_CHARG
t_outtab = IT_STD_FINAL
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "DISPLAY
*& Form EVENTS
text
--> p1 text
<-- p2 text
form EVENTS USING P_EVENTS TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
ls_event-name = 'TOP_OF_PAGE'.
ls_event-form = 'TOP_OF_PAGE'.
APPEND ls_event TO P_EVENTS.
endform. " EVENTS
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = TOP.
ENDFORM. "TOP_OF_PAGE
**& Form SORT
text
-->P_IT_SORT text
form SORT using p_sort TYPE SLIS_T_SORTINFO_ALV.
DATA : LT_SORT TYPE slis_sortinfo_alv.
LT_SORT-fieldname = 'LIFNR'.
LT_SORT-tabname = 'IT_STD_FINAL'.
LT_SORT-up = 'X'.
LT_SORT-SUBTOT = 'X'.
APPEND LT_SORT TO P_SORT.
CLEAR LT_SORT.
LT_SORT-fieldname = 'GSBER'.
LT_SORT-tabname = 'IT_STD_FINAL'.
LT_SORT-up = 'X'.
LT_SORT-SUBTOT = 'X'.
APPEND LT_SORT TO P_SORT.
CLEAR LT_SORT.
LT_SORT-fieldname = 'UMSAV'.
LT_SORT-tabname = 'IT_LFC3'.
LT_SORT-up = 'X'.
LT_SORT-SUBTOT = 'X'.
APPEND LT_SORT TO P_SORT.
CLEAR LT_SORT.
endform. " SORT
*& Form LAYOUT
text
--> p1 text
<-- p2 text
form LAYOUT .
LAYOUT-ZEBRA = 'X'.
LAYOUT-INFO_FIELDNAME = 'LINE_COLOR'.
LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
APPEND LAYOUT." TO LAYOUT.
endform. " LAYOUT
*& Form EVENTS_1
text
-->P_EVENTS text
FORM EVENTS_1 USING P_EVENTS TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
WRITE: SY-UNAME.
ls_event-name = 'END_OF_PAGE'.
ls_event-form = 'END_OF_PAGE'.
APPEND ls_event TO P_EVENTS.
ENDFORM. " EVENTS_1
waiting for ur reply...
Maybe you are looking for
-
Document table and paragraph with POI
Hi wrotten the following program in order to read paragraph and tables in a word document: * To change this template, choose Tools | Templates * and open the template in the editor. package prezziarioreader; import org.apache.poi.hwpf.HWPFDocument; i
-
IWeb page on Safari with Reader
I have a iWeb site, and I have problem with Safari "Reader" I need to know, How I can able/disable this "reader" directly in iWeb. This program "Reader" bypass my page protection and create me problem with banner, counter, and other feature. See my s
-
Anyone know how to get harman kardon soundsticks II to work on new iMac Mavericks
Anyone know how to get harman kardon soundsticks II to work on new iMac Mavericks??
-
Callmanager Hardware mismatch error
Dear All We have Cisco Call manager version 7.1, with one publisher and 2 subscribers, we get this error from the reporting of publisher "Gathers data from the Unified CM database to provide a summary of all versions of component installed on each s
-
Number of packages in a repository
Hi, Is there a way to query the number of packages in a given repository by means of pacman. Or yaourt, perhaps.