Difference in qty- mm03-mmbe

Dear all,
For one material we are facing difference between mm03 n mmbe.
in mmbe it is 0 unrestricted, 900 in QI
while in mm03 , total qty is 2700
in mb5L also it is 2700..
so in mmbe qty is less, how is it possible?
if i see in MBEW table i can see 2700 kg, i.e. 900 kg for 3 batches..
please reply as soon as possible.
regards,
Edited by: sap hobby on Oct 17, 2008 11:11 AM

Material Master (MMR)
While entering into the MMR enter organization levels plant and valuation type then you will see the stock under the particular valuation type....
Hope it may helps........

Similar Messages

Difference between CO09 and MMBE Transactions

Hi All,
Please let me know difference between CO09 and MMBE Transactions.
FOr particular material and plant ,Quantity 1 is there as FGI in MMBE screen but it is not there in CO09 for same material in the same plant.
Regards
Nidhi

Dear Nidhi Srivastva
MMBE(Stock over view ) : By using this transaction code we can get the information pertinent to the particular material stock levels in the respective plant and storage locations.
With the help of the detailed display we will know wether the material is in transit mode ,restricted ,unrestricted and so on........
CO09(Avilability overview): With the help this we will know when the order was raised and the confirmed quantities.
Apart from that we know about the goods issues and goods recites of respective plant.
Please let me know if you have any further clarifications
Thanks&Regards
Raghu.k

GR/IR AMOUNT DIFFERENCE IN QTY

Hi gurus,
          This po qty 3.360 m3
                 distribution proportionally to acc assignment 3.359 m3
                 in po history tab it is displaying 3.360 m3
                 in IR its displaying 3.359 m3
can any one pls tell me why its displaying like this difference.
regards
sap mm

This is probably because of rounding. I assume that . is decimal point in the example you have mentioned.
If you use distribution by percentage, it may not be possible to exactly split the quantity unless your percentages are nice round figures like 10% or 50%. So there will be some rounding off if you have 27%, 31%, etc.
The usual practice is to use the a smaller unit of measure if more accuracy is needed. For example, in your case, you may have used 3360 dm3 instead of 3.360 m3 (I know it does not sound logical since people are not used to dm3) or 3360000 cm3. This will make the splitting easier, but the downside is - there will be some confusion for the users - particularly vendor, goods recipient, etc.
Lakshman

Difference between teansaction ME2M & MMBE

Dear Sir,
Pls explain me the difference between the transaction ME2M & MMBE
In detail
Regards
Ajay

Hi Ajay
MMBE - stock overveiw . This is the stock overview report for a material.
It give the details of the stock of the material on real time basis at client /company code/plant/storage location/batch /special stock level
ME2M - purchasing document for material -is the report for the Displaying Purchase orders by Material
Both the reports serve 2 different purposes ., one gives the overview of stock for the material and the other the purchase order for the material
Regards
Vikrant

Difference between MMBE and MM51

Good morning.
We discovered there is a difference in stock between MMBE and MB51, but were able to localize it to the offending movement type (they are plant transfers, movement type 303 and 305).
Are plant transfers the reason for the discrepancy? Or should we even compare the quantities of MMBE and MB51?
Regards
Moggie

Hi SAP FC. Thanks for your very prompt reply.
My understanding (and perhaps it is an incorrect one, I am a BASIS administrator and am only looking into the issue because a user reported this to me) is that the totalling of all material documents in MB51 should equal the stock currently shown in MMBE. However, as I stated, I found the transfer to plant movements shown in MB51 are not included in MMBE's count when I investigated the user's request. Subsequent comparisons using different plants and materials produced the same results. The transfer to plant movement types apparently are not totaled.
Before posting here, I was going to tell the user to
a) either filter out the transfer to movement types when using MB51
b) do not use MB51 for determining the stock total of a material in a plant (use MM03 or MMBE instead)
However, I wanted to be sure by posting in this forum and getting clarification
Regards
Moggie

Qty.difference in MB5S & MR11

Hi All,
We are facing one issue regrding above mentioned transactions.
For certain PO we found that system is showing the Qty.difference (GR Qty. is more than Invoiced Qty.) whereas in MR11 system throws the error that there is no qty. difference due to which we are unable to clear the GR/IR account postings.
Please make a note that the subsequent Debit is posted against the PO.
Please guide us to understand the root cause.
Regards,
Kiran
Edited by: Kiran Badgujar on May 12, 2008 4:54 PM

Hi Kiran,
It is quite hard to say without knowing what you have set as the input criteria.
But just check the field - Qty var. less than/equal to on the input screen of MR11.
I think the entry in this field might be the reason for the difference.
Regards,
Vivek

Function Module to get Reserved qty field in MMBE transaction

Hi Frds,
In my report i need to get a reserved qty from mmbe tcode.., tables or Function Module . Pls help me

Now i found these fm BAPI_MATERIAL_STOCK_REQ_LIST
working on it venkat
Resb is not showing proper qty..........
Issue has been solved myself..........so i m closing these thread.

544 Movement ,Qty & value is not getting updated in MC.9

Dear friends,
MC.9 & MB5b report is showing difference in Qty & Value.In my analysis i came to know that 544 movement is not getting updated in MC.9. I also Checked the Statistically relev. key as 2 and Consumption posting G in OMJJ.
I require the info about MC.9 configuration or any info related to this.

Hi,
Please refer SAP note 581240 for this.
For these stocks you have three valuation types for selection:
' ' = no inventory valuation
'A' valuation = without reference to sales document ('make-to-stock
inventory')
'M' = separate valuation with reference to the sales and distribution
document/project
ONLY stock/stock movements with special stock valuation 'A'
(make-to-stock inventory) are updated in Inventory Controlling.
Thus, if you find a document which is not updated in the info structures
of Inventory Controlling (S031-S039) and you require this, check the
corresponding documents in the materials management tables. You can find
the special stock indicator and indicator of the valuation of the
special stock, for example, in document segment table MSEG in the
following fields:
MSEG-SOBKZ = Special Stock Indicator
MSEG-KZBWS = Indicator: Special Stock Valuation
Only A type (make to stock ) are updated in the info structures.
Hoping this helps.
Regards,
Rajesh.

Delivery cannot be created (only 0 qty of material available )

Hello All,
I have created a sales order for material A on plant B for one qty. The delivery date is 29.12.10 but the system has confirmed the schedule line with a delivery date of 3.1.11. The material availibilty date is 28.12.10.
But when I create the delivery, the system gives message, "Delivery cannot be created (only 0 qty of material available )".
I have checked MMBE and CO09 , there is a stock of qty 2 for material A for plant B. Also there is no other sales order consuming the stock in CO09 for material A in plant B.
The schedule line catergory is CN(not relevant for MRP) in sales order and that is why I cannot see sales order requirement in Md04/Co09. But in any case since the stock is available, the system confirmed the schedule line for 3.1.11 in sales order as said above.
While creating delivery, we are giving a delivery date of 28.12.10 (equal to material availibity date ). I have not checked the availibilty check group but even if checking group= no check, still I think ,the system will confirm schedule line since stock is available and it has confirmed stock in sales order as said above
But still we cannot create delivery and receives the error, "Delivery cannot be created (only 0 qty of material available )"
Pls help.
regds
Pamela

Hi Pamela,
It seems that material A is not available in plant B on 28.12.2010 even if the stock is shown as 2 qty in MMBE
Please go to MMBE place the cursor on storage location and the check the Warehouse stock for that material.
It may be that material qty 2 which is currently shown in stock overview is lying in interim storage type 916 against some goods movement (601) issued against some other sales order.
Also check whether negative stock are allowed in that storage type. In your case , I think they are not allowed.
I hope this helps
Br,
Tushar

Reduction in Qty. in Exhisting PO for Third Party Orders

Hi,
Lets take up this example first, Consider a TPO with belwo details.
Sale Order - Third Party
Item 1 / Qty - 500 / Item Cat - TAS / Del. Date1
Corresponding PR to this
Purchase Order
Item 1 / Qty - 500 / Item Cat - TAS / Del. Date1 / Vendor 1
After Placing the Order to Vendor 1 , he comes back and says he can deliver only 250 qty on Del. Date1. & remaining 250 he cannot deliver on the same date.
And i create different new PO for the difference in qty. that is 250 to Vendor 2. who can deliver the same goods on Date1 as in the SO.
Now if i want to update the exhisting PO which is placed on Vendor 1 by reducing the qty to 250. i am getting an error message stating " PO QTY. IS LESS THAN SO QTY".
My question is
1. Why cant we reduce the Qty. at PO ?
2. If we can do that , How ?
Thanks in Advance !!

Hi Sridhar ,
Refer Table EKKN for PO and SO Linkage.
Table EBKN for PR and SO Linkage.
Regards
Ramesh Ch

Correcting stock difference

Stock transfer is between two plants via two step process. There is a difference in the MB5t & MMBE report, after the stock transfer being done. Is there any program to clear the differences between these two reports?

if you did two step sto, then stock issued from supplying plant through PGI, then at supplying plant stock is immediately the same will reflected at MMBE. but it is not received by receving plant. so the stock is still in TRANSIT. this refects at MB5t.
MMBE - stock overview MMBE did not show stok in transit
MB5T --stock in transit

DIFFERENCE BETWEEN TWO INTERNAL TABLES,THESE TABLES HAVE SAME FILEDS

TYPES: BEGIN OF
TY_AS_UP,
WERKS LIKE
                  MARC-WERKS,
MATNR LIKE
                   MARC-MATNR,
LGORT LIKE
                  MARD-LGORT,
LABST(13) TYPE C,
(MARD-LABST)
END OF TY_AS_UP.
TABLES:
1) FLAT FILE DATA.:
DATA: WA_FILEDATA
             TYPE TY_AS_UP,
I_FILEDATA TYPE STANDARD TABLE OF TY_AS_UP INITIAL SIZE 0.
2) SAP DATA (SELECT QUREY)
DATA: WA_SAPDATA
              TYPE TY_AS_UP,
I_SAPDATA TYPE STANDARD TABLE OF TY_AS_UP INITIAL SIZE 0.
NOTE:
I brought data to above table(2) from two internal tables I_MARC and I_MARD .
My requirement is to display difference between tables 1) and 2) based on quantity field(MARD-LABST)..
report layout:
      top-of-page
plant diff qty distri.qty   sap
01       -20       30        50
        end-of-page
          page no 1.
Kindly help me,it is urgent

hi micky,
     thanks for your solution.
another problem:
I could not understand below
requirement, could you please
explain me.
8)     Format the report based on the display options specified in the selection screen.
a)     Display option EQUAL IN QTY show report lines where the difference is between the distributor file quantity and the SAP quantity is 0.
b)     Display option DIFFERENCE IN QTY show report lines where the difference between the distributor file quantity and the SAP quantity is not 0.
c)     If both options are selected, show report lines where the difference is both 0 and not 0.
d)     Display SKUs in the distributors file not found in SAP as Missing SKUs
regards,
saritha.

Trigger cycle count when zero qty is picked

I need help with the following issue.
Currently when the user confirms a TO with LM05 and selects confirm with differences (and enters zero qty picked) the system cancels the TO but no additional steps are taken to ensure that the cycle count team knows of the inventory variance ..
How can we trigger a cycle count in this instance when we are confirming with differences and Qty picked is 0.
Can someone please outline the steps needed in config.

Ah, I see you dont even have a problem with cycle count, you just do not know how to enter the scrap quantity during the daily work.
It depends, as everything in SAP, on the process were the scrap material appears.
If it appears as a by-product in while you produce something, then the quantity is created with movement type 532
But if you create this scrap if a worker damages soemthig, then you issue the damaged material with 201 to a cost center, and then you do a 202 movement to create stock at a scrap material master.

Error in GR when delivery qty PO quantity

Hello!
we create NB type POs for inter company transactions. If the PO qty is 10 and we actually deliver 11 (goods issue = 11), we are unable to do the GI against the delivery with the error message that the PU quantity exceeds by 1 unit.
I have checked the vendor master for the supplying plant but unable to find any setting that would enable us to do the Goods receipt in the receiving plant for the actual qty shipped i.e. 11 units. Can someone tell me where this setting is so we don't et this error and can receive the goods against the delivery w/o modifying the PO? We don't want to receive against the PO because that causes imbalance in the quantity and the remaining would remain in MB5T.
Many thanks.

Hi,
This error is due to the fact that the GI qty and the PO qty differance.When you try the delivery at VL10G, or VL10B sytem creates the delivery for the PO qty.and when you try to change the pick qty and do the PGI this error will come.Please check the qty at MMBE for the supplying plant.I do not know why the GI should be more if the PO qty 10.
If you post transactions other than the PO qty delivery completion issues will exists so that the indicator can not be taken.
How ever you post 10qty GI and let the receiving plant receive 11 and change the PO qty to11 and do a delivery for the excess and PGI it.
Regards,

Batch determination- availability qty

Hi Gurus, i am doing batch determination in process orders. in "batch determination co: batches" pop-up, batch no and available qty is shown which is less than the unrestricted qty in MMBE transaction. is there any way to see how system calculated this available qty in batch determination? is there any tcode or table to see those figures. Plaese suggest.

Hi KK,
Please see below and advise.

Difference in qty- mm03-mmbe

Similar Messages

Maybe you are looking for