Difference in stock values after MR21 updation

Here the user has updated a material price using MR21 and after that he tried to execute the MB5L (stock balance MM-FI) to know the stock values in MM & FI records. However, the stock values in MM does not tally with FI values. There is a variance.
While executing MB5L, system has issued a message like this:
"Restriction on this field lead to incorrect results.
The display of selected material records shows the detailed data of the material, but comparing these values with the balance of the stock account may not provide the same result.
Execute the balance comparison at company code level using report RM07MMFI (MM/FI balance comparison)."
Which report the user should use for comparison ?

Hello,
MB5L must always be ran at Company code level. Once it is ran, you can get to the Plant/Material level balances by double-clicking the Material GL Account.

Similar Messages

Difference in stock value with same quantity

Dear Friends,
one of my user has a problem regarding difference in Stock value. when he had run the report MB52 up to 31/03/2011, and saved his value in temp file and now in current date he is using report MC.9 for same material up to 03/2011. now his problem is difference in stock value while stock quantity is same for particular material. and this thing is correct in all other material.
Are MB52 and MC.9 both reports give same data for same date like up to 31/03/2011 ? if yes then where would be the problem? why difference is coming and what should i need to check? please guide me, i am new in MM.
Thanks
Vijay Sharma

MC.9 is a statistic transaction which is using info structure information as basis, while MB52 basis is normal business data.
Updates for info structure have less priority, which means that it can happen that the update fails, but this does not effect the business transaction in general, and the transaction is not rolled back, which then leads to inconsistencies between both.
To solve this you would need to rebuild the information structure (which is only possible if no postings are made in this time of regeneration).

Difference between cash value after customs and before customs?

Hello experts.
Where can you percieved the diffrerence on the landed costs if you select the allocation by before/after customs?
Looking forward to your reply,
Kind regards

Hi Erickson,
In the landed cost you can allocate your customs cost. Customs cost allocation to items can be difference per item customs cost percentage (as defined in the master data) or based on total cost allocation (actual customs in the landed cost screen).
If your landed cost allocated to total value after custom, then that cost will be allocated based on item value after customs (item cost + customs).
Example:
1. Item A; Value 500; customs rate : 10%
2. Item B; Value 1500; customs rate: 15%
Total landed cost 2000
Landed Cost Allocation:
=> cash value before customs:
1. Item A
     => Customs = 10% * 500 = 50
     => Landed cost = (500/2000) * 2000 = 500
     => final cost Item A = (item cost + customs + landed cost) = 500 + 50 + 500 = 1050
2. Item B
     => Customs = 15% * 1500 = 225
     => Landed cost = (1500/2000) * 2000 = 1500
     => final cost Item A = (item cost + customs + landed cost) = 1500 + 225 + 1500 = 3225
=> cash value before customs:
1. Item A
     => Customs = 10% * 1000 = 100
     => Cash value after Customs = 500 + 100 = 600
     => Landed cost = (600/2275) * 2000 = 483.52
     => final cost Item A = (item cost + customs + landed cost) = 500 + 100 + 483.52 = 1033.52
2. Item B
     => Customs = 15% * 1500 = 225
     => Cash value after Customs = 1500 + 225 = 1725
     => Landed cost = (1725/2275) * 2000 = 1516.48
     => final cost Item A = (item cost + customs + landed cost) = 1500 + 225 + 1516.48 = 3241.48
=> If actual customs directly being input into landed cost screen, the would be no difference on the landed cost allocation since all customs allocated proportionally.
Cheers

Stock value related to sales return

Hi experts,
When sales return, the return goods captures the current stock value after PGI. What's the system logic for that? U know, the customer wants it to capture the stock value of the responding sales delivery date.
For e.g., the goods (10 ton) is sold in June when the stock value is $10/ton. In July, 2 ton is returned while the stock value is $15/ton. According to the standrad system configuration, the return goods bases on $15/ton to calculate (accounting document in material document after PGI). But the customer want to base on $10/ton to calculate as to keep some financial reports balance.
In case the difference of stock value occurs, is it the only way to adjust material cost via MR21 & the difference of stock by KEU5?

Hi Colleagues,
I am facing the same issue with my client.
Here, the project was implemented 5 years back and till now the processes in system were working fine. But, raised a concern on MAP of material during issues and returns.
Client is maintaining MAP for certain materials (includes some FG items also) in Material master data.
During goods issue MAP is captured at say 100/- But, if the stock is being returned into plant after 6 months or so.....then during goods returns, MAP is captured at current prices ..say 95/-.
Now the client want to return the stock at same price during original goods issue i.e at 100/- only. Even if goods return document captures the stock MAP at 100/- ...then where do difference (5/-) will be posted. As per logic difference will be posted to P/L account, but can we see this posting in accounting document of goods return material document?
I think it is not possible in standard process in system. To take up this activity with system modification, can we utilize userexits in MM module? If so, can anybody please tell...which include can we consider to do this.
Thanks & regards,
Praveen.

Changes in stock value of the material even after closing period

The client closes the accounts every month end. Say they close the books of accounts for the month of Jan07 on 31st Jan 2007. After closing the account they are running MC.9 to know the stock value of different plants for the previous month. i.e. for the month of Jan07. But every day when the client runs the MC.9 they found some differences in the stock price & quantity.
For better understanding, consider they close the period on 31st Jan. When they run the MC.9 on 2nd Feb it shows the value say 100$ and qty of 100. When we run the same report on 4th Feb the value got changed to say 98$ and qty remain same. Again when we run on 6th Feb the value is changed again to say 102$ and stock is 100.
We checked the MB51 with posting date & entered date. We could not find any back posting.
What could be the reason for the variation in the stock price & qty ? Any pointers will be highly appricated.

Hi Venkat,
Your previous posting talked about variation in stock value and now you are saying that there are changes in stock qty also. So the better option would be to check those material which has variation and compare them with other standard reports to get a solution. Export the list of material to an excel sheet and compare them with that of the other reports. This would help you to find the materials which has changes and you can narrow down to the root cause. Once you get the material then u can go by posting date and find the movements.
Hope this helps. Reward if u find it useful.
regards
Anand.C

Stock value is not getting updated in APO system From ECC automatically

Hi All,
Stock value is not getting updated in APO system From ECC automatically but if we do it manually from transaction CFM2 it will get updated.
for this we are using EXIT_SAPLCSTK_001.
I am using VL10A for delivery and VL06G for PGI
I have also checked integration model for material and stock.
Please help me out as it is very urgent.
Thanks,
Gaurav Mittal
Edited by: GAURAV MITTAL on Feb 6, 2008 6:09 PM

Hi,
for transferring the stock data from R/3 to APO automatically, you need to have the integration model for material and stock activated.
please check the same.
if this does not help, let me know in detail the steps which you are following..
Ram

Update Column value after current item is Approved and then publish major version using Sharepoint 2013 designer workflow

Hi,
We have a requirement to update a column value once the item has been approved.
Following settings have been made in the publishing articles list:
Require content approval for submitted items : yes
Create major and minor (draft) versions
Who should see draft items in this document library? :Only users who can edit items
Require documents to be checked out before they can be edited? : yes
I have createdatu a Sharepoint 2013 workflow to check if Approval sts of current item = 0 i.e. Approved , then check out and update the item and finally checkin the item. Everything works fine till this point except that the minor version of the item is
checked in. Due to this the updated columns are not published to others.
Also, I created a Sharepoint 2010 workflow to SET CONTENT APPROVAL = APPROVED and started this workflow from my list workflow above, but the item does not get checked-in and always shows "In Progress" status with comment "The item is currently
locked for editing. Waiting for item to be checked in or for the lock to be released.".
Please let me know where I am missing out so that once the item is approved, column value gets updated and current item is still in Approved status.
Thanks

Hi,
According to your post, my understanding is that you want to update Column value after current item is Approved and then publish major version using Sharepoint 2013 designer workflow.
You will get into this kind of Catch-22 situation trying to set the Content Approval Status in SharePoint Designer workflow:
- You must check out the document before you can change the Content Approval Status
- You can't change the Content Approval Status once the document in checked out
Since you set the Require documents to be checked out before they can be edited=Yes, you will need to check out the document when run the workflow on the item. But you cannot approve a document when it is checked
out. So the logic in workflow conflicts.
As a workaround, you can use the Start Another Workflow action to start the normal Approval workflow on the document. The built-in Approval workflow can work with a document that’s not checked out.
The designer approval workflow also can work with a document that’s not checked out.
You can create two workflow using SharePoint Designer 2013.
First, create a SharePoint 2010 platform workflow.
Then, create a SharePoint 2013 platform workflow.
Then when the SharePoint 2013 platform workflow start, it will start the SharePoint 2010 platform workflow to set content approval status, then the SharePoint 2013 platform workflow will update current item value.
More information:
SharePoint Designer Workflow Content Approval Issue
SharePoint 2010 Approval Workflow with Content Approval
Best Regards,
Linda Li
Linda Li
TechNet Community Support

An internal error has occurred: ?:0: attempt to index a nil value after installing LR5.5 update and trying to play or preview slideshow

An internal error has occurred: ?:0: attempt to index a nil value after installing LR5.5 update and trying to play or preview slideshow. Never had this problem before. I went to forums and see that this is a problem with previous versions and this only occurred after installing lastest update.

Jeannine,
If you follow the advice of the previous poster Julie Kmoch and then gradualy add presets back in one at a time you might be able to find the one that is causing the issue. I may be guessing, but I believe the issue has something to do with either an incompatible Preset setting (eg a older preset in newer version of LR) or a corrupt Preset.
Say you bought LR2 and imported a bunch of Presets from the internet, cuz 'Hey these effects are cool and I don't have to recreate the wheel', and then you upgraded to LR3 (not a clean install) and now one of the Presets that calls a certain slider setting or value that is different in LR3 doesn't work anymore. This might be why it throws the error, but again I am just speculating.
Location of LR Preset folder in Windows Vista/ Windows 7
C:/Users/<YourUserName>/AppData/Roaming/Adobe/Lightroom/Develop Presets
If you do not see the folder AppData, you may need to change the settings in Windows Explorer to 'Show Hidden Files and Folders'. To do that in Windows Vista/ Windows 7, open a Windows Explorer window, Click on Organize, then Foler and Search Options. Then click on the View tab and select the option button next to Show hidden files, folders and drives.
Hope this helps a bit,
Glenn

Since updating to Firefox 4, my MSN home page no longer displays hotmail emails or my stock informtion. I have to click on hotmail or stocks to open another window to see if I have email or updated stock values. Why is this happening?

I recently updated to Firefox 4. Now my Norton password protection does not work; My hotmail view on my MSN home page does not work; and my stock updates to not work. I have to click on "hotmail" to see if I have new e-mails and click on "stock quotes" to see updated stock values. Prior to the "upgrade", my new emails could be viewed on my MSN homepage as well as my stock prices. Does anyone know why this is occurring?

I was able to fix the issue here. Steps Taken: From the comand line I ran
dscl /Search read /Users/jdoe HomeDirectory
It returned # No such key: HomeDirectory
This was the big clue.... it should have returned
HomeDirectory: <home_dir><url>afp://files.hihllc.lan/Users/jdoe</url><path>/</path></home_dir>
I unbound the Mac from AD and ran the following command in terminal.
dscacheutil -flushcache
I then went into OS X sharing preferences and renamed the computer slightly, so it would create a new computer record in AD. I rebound the machine to AD making sure in Directory Utility Advanced, under User Experience that Force local home directory on start up disk was unchecked and Network protocol to be used was AFP.
I then ran
dscl /Search read /Users/jdoe HomeDirectory
and it returned
HomeDirectory: <home_dir><url>afp://files.hihllc.lan/Users/jdoe</url><path>/</path></home_dir>
I had the user reboot... which was necessary. When he logged in HomeSync fired up. He had quite a few conflicts, so I told him to select use files on this computer for all conflicts.
I checked the FileSyncAgent.logs and it was good.
Let me know if this fixes your issue.
Thanks,
Ray

Update an attribute's Min. & Max. Attribute value after opening date

Hi
We have created an attribute 'projected price' on a bid invitation. The minimum and maximum attribute values will only be known after all bids have been submitted. So we need to populate the minimum and maximum attribute values after the opening date before running the evaluation report. Any assistance on how we could do this will be appreciatted.
Regards

I've managed to solve this by doing the following.
1) Get the items on the Bid Invitation
CALL FUNCTION 'BBP_PROCDOC_GETDETAIL'
EXPORTING
 I_GUID = ip_guid
 I_OBJECT_TYPE = 'BUS2200'
IMPORTING
 E_HEADER = ls_header
 ET_ATTACH = lt_attach
 ET_CONDITIONS = lt_conditions
 ET_DYN_ATTR = lt_dyn_attr
TABLES
 E_ITEM = rt_items.
2) Get all the weightings for these items.
CALL FUNCTION 'BBP_PDWGT_GETDETAIL'
 EXPORTING
 i_p_guid = ip_guid
 i_p_kind = 'B'
 i_object_type = 'BUS2200001'
 tables
 e_weight = rt_weights.
3) Then updated the specific attributes values.
DATA: lt_x_weight TYPE bbpt_pds_weight_ic,
 ls_weight TYPE bbp_pds_weight_ic,
 lt_y_weight TYPE bbpt_pds_weight_ic.
CLEAR ls_weight.
SELECT SINGLE * INTO CORRESPONDING FIELDS OF ls_weight
 FROM bbp_pdwgt WHERE guid = ip_guid.
IF sy-subrc NE 0.
 EXIT.
ENDIF.
APPEND ls_weight TO lt_y_weight.
ls_weight-value_amount1 = ip_min.
ls_weight-value_amount2 = ip_max.
ls_weight-kz = 'U'.
APPEND ls_weight TO lt_x_weight.
CALL FUNCTION 'BBP_PDWGT_DB_UPDATE'
 TABLES
 i_x_weight = lt_x_weight
 i_y_weight = lt_y_weight.
IF sy-subrc EQ 0.
 COMMIT WORK.
ENDIF.
Regards

After ICS update, stock email not syncing for exchange 2010 activesync.

After ICS update, stock email not syncing for exchange 2010 activesync.
My corporate email which was flawlessly working before ICS update. Even though I tried re-creating a new account, it hangs "waiting for sync"
Has any patch been released or explicit instructions have been provided ?
First sync:
5/3/2012 7:47 PM
Last successful sync:
Not Available
Folders synced:
0
Device name:
Not Available
Device model:
MT11i
Phone number:
Not Available
Mobile network:
Not Available
Device type:
Android
Device ID:
xxxxxxxxxxxxxxxxxxx
Device IMEI:
Not Available
Device OS:
Android 4.0.3
Device language:
Not Available
User agent:
Android/4.0.3-EAS-1.3
Access state:
Access Granted
Access set by:
Global Permissions
Policy applied:
Active Sync Policy - Partially applied
Policy updated:
5/5/2012 8:11 AM
ActiveSync version:
14.1
Also at http://talk.sonymobile.com/message/184221
Whyr is this defect "assumed answered" ? I went though all the posts and didnt find any solution?

Hopefully my reply to this can help.
http://talk.sonymobile.com/message/190149#190149
And please try to keep same problem in same thread.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Open Sales Order values not getting updated after run RVKRED77 & RVKRED88

Hiiii,
In Production Server. We run the reports RVKRED77 & RVKRED88. Credit info structure and and Open Sales Order values not getting updated. In FD32, Status - Sales value it showing '0". At the time of creating Sales Order Dynamic Credit check not happening coz of Tables S066 not updating. Please provide me Solution.
Best Regards,
Sridhar . P

Dear Heagal,
I followed your suggestions and implemented in the Development and moved the changes in to Quality Server. I tested it thoroughly by creating New Customer and maintained Credit Limit. I come to know that Problem is in all Servers. I made 3 changes.
1. In Pricing Procedure Sub Total A it was not maintained against Net value. I placed it.
2. Removed Credit groups for Delivery Type.
3. In OVA8 i maintained Max. Doc Value :99,999,999.00 before it was with 1.00
I checked the OMO1 Settings it was Asynchronous. As SAP Notes Suggesting to use Synchronous but here it's a client setting. So, It's Can't possible to change. Changes will affect other Company Codes.
Tested both in DVP and QTY Dynamic Credit Check is working Perfectly and Status in FD33 Sales Value field getting update.
If i move these changes in to Production, Will i need to run the reports again or not? How it will affect on Old Cusomer Billing and Credit Limit data. For few of the Customers the Credit Limit data it was exceeded. Please provide me advice. The issue need to be Solved immediately.
Best Regards,
Sridhar

Custom Report for the Stock and Stock value for a specific date

Hi SAP Gurus,
Is there any SAP standard t-code or any logic to get the transcations (additions (for example: Purchases) and subtractions (Sales) to the inventory) for a particular materials in a plant and with Total Stock and also Total Stock value when that particular transaction happened?
Our system is R/3 4.7
I looked at the MB5B, MBCE, MBCA, MC44, MB51 and some other standard T-codes but could not find the total stock value at the time of Transaction happened.
The history tables MBEWH and MARDH are updated after the month end closing procedures, right, which means I will have the inventory value changing every month if material has Price "S".
Thank you,
-Harter

Hi Harter,
Unfortunately, you cannot see in a single tcode the value of stock and stock quantity on a specific date. As you yourself have pointed out, we only have to make use of the history table MBEWH, MARDH for the month wise stock quantity and value. Along with that you should also make use of the table MBEW to take teh stock quantity and value. So the total value of stock on a particular date will be
Stock qnty = MBEWH value until the previous month (for teh specific valuation class, period etc) + MBEW value for the present date.
But this will nto work out if you want to find out teh stock quantity and stock value on a past date basis. For past data, only m onthwise data is available. For this anyway you can refer to MC.1 and so on reports.

Problem with Stock Value Report

Hi Experts,
We use MB5B report to see the opening and closing value of stock for the given period.
Here i am facing one problem that even i am running the report for the same period ( already closed periods) ans same inputs the system gives me some different valus every time i am running .
I observed that difference between the opening and closing values for every output is constant.
What could be the reason that system gives such different values when i run MB5B . No backposting is done.
Regards, B

Thanks for replying,
i have mentioned the
company code, Plants ,
Selection date,
in stock type valuated stock,
in settings selection
Totals only - Non Hierarchy Display Layout
Only Matls Handled in Batches ( But Batches w/o stock segment is not checked)
It is giving me changed values after every 10-15 minutes.
Regards,
BB

[SOLVED] RT2870 drops connection after pacman update

Since last pacman upgrade my USB wireless works for just a few seconds while used; while watching transfer speed I see at first full speed and then going slower and slower and in a few secs totally stopped, without being disconnected. I have to reboot to get it working again (worked sometimes by ip link set wlan 0 down & up)
No difference using Wicd or networkmanager.
I have never had any issues earlier even since Kernel 3.0.
Linksys router with standard WPA2 configuration, other computers in house connecting without problems.
lsusb:
D-Link System DWA-140 RangeBooster N Adapter(rev.B1) [Ralink RT2870]
uname -r
3.2.8-1-ARCH
I've tried blacklisting all the kernel rt2800usb modules which supposedly have taken over specific Realtek drivers according to wiki
https://wiki.archlinux.org/index.php/Wi … and_rt2870
with no effect.
Tried killing wpa_supplicant (only found one instance though) as suggested on some blogpost but no effect.
Tried the proprietary rt2870sta driver as suggested in Wiki
https://wiki.archlinux.org/index.php/Rt2870
-got a working link on ra0 but it wouldn't connect to WiFi (kept asking for password).
More debug info:
lsmod | grep rt > lsmod.txt
exportfs 3695 1 nfsd
rt2800usb 14400 0
rt2x00usb 9076 1 rt2800usb
rt2800lib 40260 1 rt2800usb
rt2x00lib 35183 3 rt2800lib,rt2x00usb,rt2800usb
crc_ccitt 1363 1 rt2800lib
mac80211 228527 3 rt2x00lib,rt2800lib,rt2x00usb
cfg80211 172260 2 mac80211,rt2x00lib
iTCO_vendor_support 1961 1 iTCO_wdt
usbcore 146241 7 ehci_hcd,uhci_hcd,usbhid,rt2x00usb,rt2800usb,usblp
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Feb 27 21:51:46 CET 2012
[ 0.000000] Command line: root=/dev/disk/by-uuid/ce706691-4517-477c-a42d-417ab8ffef38 loglevel=3 ro quiet resume=/dev/disk/by-uuid/5a94d96e-0fdd-425a-91c5-6fe96da349f0 nomodeset
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff70000 (usable)
[ 0.000000] BIOS-e820: 00000000cff70000 - 00000000cff7e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff7e000 - 00000000cffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer P5Q SE/P5Q SE, BIOS 0502 08/20/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 120000000 mask FF0000000 write-back
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcff70 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff70000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff70000 page 4k
[ 0.000000] kernel direct mapping tables up to cff70000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ cff6a000-cff70000
[ 0.000000] RAMDISK: 37d76000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fb2c0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cff70100 0005C (v01 A_M_I_ OEMXSDT 08000820 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff70290 000F4 (v03 A_M_I_ OEMFACP 08000820 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cff70440 0907C (v01 A0985 A0985001 00000001 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000cff7e000 00040
[ 0.000000] ACPI: APIC 00000000cff70390 0006C (v01 A_M_I_ OEMAPIC 08000820 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff70400 0003C (v01 A_M_I_ OEMMCFG 08000820 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cff7e040 00081 (v01 A_M_I_ AMI_OEM 08000820 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cff794c0 00038 (v01 A_M_I_ OEMHPET 08000820 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000cff79500 000B0 (v01 A_M_I_ OEMOSFR 08000820 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cff7e5d0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000012fffb000 - 000000012fffffff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cff70
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048319
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 831408 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 193536 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff70000 - 00000000cff7e000
[ 0.000000] PM: Registered nosave memory: 00000000cff7e000 - 00000000cffd0000
[ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s82176 r8192 d24320 u524288
[ 0.000000] pcpu-alloc: s82176 r8192 d24320 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028858
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/disk/by-uuid/ce706691-4517-477c-a42d-417ab8ffef38 loglevel=3 ro quiet resume=/dev/disk/by-uuid/5a94d96e-0fdd-425a-91c5-6fe96da349f0 nomodeset
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4047500k/4980736k available (4488k kernel code, 787460k absent, 145776k reserved, 4409k data, 736k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2997.032 MHz processor.
[ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 5996.81 BogoMIPS (lpj=9990106)
[ 0.003340] pid_max: default: 32768 minimum: 301
[ 0.003361] Security Framework initialized
[ 0.003367] AppArmor: AppArmor disabled by boot time parameter
[ 0.006673] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008366] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009152] Mount-cache hash table entries: 256
[ 0.009284] Initializing cgroup subsys cpuacct
[ 0.009289] Initializing cgroup subsys memory
[ 0.009297] Initializing cgroup subsys devices
[ 0.009298] Initializing cgroup subsys freezer
[ 0.009300] Initializing cgroup subsys net_cls
[ 0.009302] Initializing cgroup subsys blkio
[ 0.009332] CPU: Physical Processor ID: 0
[ 0.009333] CPU: Processor Core ID: 0
[ 0.009335] mce: CPU supports 6 MCE banks
[ 0.009342] CPU0: Thermal monitoring enabled (TM2)
[ 0.009346] using mwait in idle threads.
[ 0.010343] ACPI: Core revision 20110623
[ 0.013339] ftrace: allocating 17394 entries in 69 pages
[ 0.017049] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.050789] CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06
[ 0.053330] APIC calibration not consistent with PM-Timer: 97ms instead of 100ms
[ 0.053330] APIC delta adjusted to PM-Timer: 2081243 (2020688)
[ 0.053330] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.053330] ... version: 2
[ 0.053330] ... bit width: 40
[ 0.053330] ... generic registers: 2
[ 0.053330] ... value mask: 000000ffffffffff
[ 0.053330] ... max period: 000000007fffffff
[ 0.053330] ... fixed-purpose events: 3
[ 0.053330] ... event mask: 0000000700000003
[ 0.070123] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.096675] Booting Node 0, Processors #1
[ 0.096678] smpboot cpu 1: start_ip = 9a000
[ 0.193349] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.199992] Brought up 2 CPUs
[ 0.199995] Total of 2 processors activated (11992.51 BogoMIPS).
[ 0.202833] devtmpfs: initialized
[ 0.203768] PM: Registering ACPI NVS region at cff7e000 (335872 bytes)
[ 0.203929] print_constraints: dummy:
[ 0.203965] NET: Registered protocol family 16
[ 0.204054] ACPI: bus type pci registered
[ 0.204105] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.204107] PCI: not using MMCONFIG
[ 0.204109] PCI: Using configuration type 1 for base access
[ 0.204490] bio: create slab <bio-0> at 0
[ 0.204490] ACPI: Added _OSI(Module Device)
[ 0.204490] ACPI: Added _OSI(Processor Device)
[ 0.204490] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.204490] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.204490] ACPI: EC: Look up EC in DSDT
[ 0.206720] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.211061] ACPI: SSDT 00000000cff7e0d0 00277 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.211260] ACPI: Dynamic OEM Table Load:
[ 0.211262] ACPI: SSDT (null) 00277 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.211420] ACPI: SSDT 00000000cff7e350 00277 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 0.211621] ACPI: Dynamic OEM Table Load:
[ 0.211623] ACPI: SSDT (null) 00277 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 0.211740] ACPI: Interpreter enabled
[ 0.211743] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.211758] ACPI: Using IOAPIC for interrupt routing
[ 0.211772] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.212438] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.246853] ACPI: No dock devices found.
[ 0.246855] HEST: Table not found.
[ 0.246858] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.246900] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.246996] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.246998] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.247000] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.247001] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.247003] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xffffffff]
[ 0.247012] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
[ 0.247043] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
[ 0.247071] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.247074] pci 0000:00:01.0: PME# disabled
[ 0.247103] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[ 0.247137] pci 0000:00:1a.0: reg 20: [io 0xc800-0xc81f]
[ 0.247179] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
[ 0.247213] pci 0000:00:1a.1: reg 20: [io 0xc880-0xc89f]
[ 0.247254] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[ 0.247288] pci 0000:00:1a.2: reg 20: [io 0xcc00-0xcc1f]
[ 0.247336] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[ 0.247354] pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff]
[ 0.247428] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.247432] pci 0000:00:1a.7: PME# disabled
[ 0.247451] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
[ 0.247463] pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
[ 0.247516] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.247519] pci 0000:00:1b.0: PME# disabled
[ 0.247535] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[ 0.247589] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.247592] pci 0000:00:1c.0: PME# disabled
[ 0.247614] pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
[ 0.247669] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.247672] pci 0000:00:1c.5: PME# disabled
[ 0.247690] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[ 0.247724] pci 0000:00:1d.0: reg 20: [io 0xc080-0xc09f]
[ 0.247766] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[ 0.247800] pci 0000:00:1d.1: reg 20: [io 0xc400-0xc41f]
[ 0.247841] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[ 0.247875] pci 0000:00:1d.2: reg 20: [io 0xc480-0xc49f]
[ 0.247924] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[ 0.247941] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff]
[ 0.248016] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.248019] pci 0000:00:1d.7: PME# disabled
[ 0.248035] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.248084] pci 0000:00:1f.0: [8086:3a18] type 0 class 0x000601
[ 0.248181] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
[ 0.248193] pci 0000:00:1f.2: reg 10: [io 0xb000-0xb007]
[ 0.248199] pci 0000:00:1f.2: reg 14: [io 0xac00-0xac03]
[ 0.248205] pci 0000:00:1f.2: reg 18: [io 0xa880-0xa887]
[ 0.248212] pci 0000:00:1f.2: reg 1c: [io 0xa800-0xa803]
[ 0.248218] pci 0000:00:1f.2: reg 20: [io 0xa480-0xa48f]
[ 0.248224] pci 0000:00:1f.2: reg 24: [io 0xa400-0xa40f]
[ 0.248262] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[ 0.248274] pci 0000:00:1f.3: reg 10: [mem 0xf9fff400-0xf9fff4ff 64bit]
[ 0.248290] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.248317] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
[ 0.248328] pci 0000:00:1f.5: reg 10: [io 0xc000-0xc007]
[ 0.248335] pci 0000:00:1f.5: reg 14: [io 0xbc00-0xbc03]
[ 0.248341] pci 0000:00:1f.5: reg 18: [io 0xb880-0xb887]
[ 0.248347] pci 0000:00:1f.5: reg 1c: [io 0xb800-0xb803]
[ 0.248353] pci 0000:00:1f.5: reg 20: [io 0xb480-0xb48f]
[ 0.248359] pci 0000:00:1f.5: reg 24: [io 0xb400-0xb40f]
[ 0.248418] pci 0000:01:00.0: [10de:05e2] type 0 class 0x000300
[ 0.248426] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.248434] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.248443] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
[ 0.248449] pci 0000:01:00.0: reg 24: [io 0xdc00-0xdc7f]
[ 0.248455] pci 0000:01:00.0: reg 30: [mem 0xfea80000-0xfeafffff pref]
[ 0.248497] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.248499] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.248502] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.248505] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.248536] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.248543] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.248590] pci 0000:02:00.0: [1969:1026] type 0 class 0x000200
[ 0.248610] pci 0000:02:00.0: reg 10: [mem 0xfebc0000-0xfebfffff 64bit]
[ 0.248621] pci 0000:02:00.0: reg 18: [io 0xec00-0xec7f]
[ 0.248706] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.248710] pci 0000:02:00.0: PME# disabled
[ 0.248728] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.248736] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.248739] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.248742] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.248794] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.248801] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.248803] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.248805] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.248807] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.248809] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
[ 0.248822] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.248885] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.248906] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.248953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.248985] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.249003] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.249005] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.249007] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.254308] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.254341] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.254373] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.254405] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.254437] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.254469] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.254501] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.254533] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.254589] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.254589] vgaarb: loaded
[ 0.254589] vgaarb: bridge control possible 0000:01:00.0
[ 0.254589] PCI: Using ACPI for IRQ routing
[ 0.259493] PCI: pci_cache_line_size set to 64 bytes
[ 0.259546] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.259547] reserve RAM buffer: 00000000cff70000 - 00000000cfffffff
[ 0.259624] NetLabel: Initializing
[ 0.259626] NetLabel: domain hash size = 128
[ 0.259627] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.259637] NetLabel: unlabeled traffic allowed by default
[ 0.259649] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.259653] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.259656] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.270027] Switching to clocksource hpet
[ 0.274998] pnp: PnP ACPI init
[ 0.275013] ACPI: bus type pnp registered
[ 0.275071] pnp 00:00: [bus 00-ff]
[ 0.275073] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.275074] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.275076] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.275078] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.275079] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.275081] pnp 00:00: [mem 0xd0000000-0xffffffff window]
[ 0.275124] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.275131] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.275167] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.275170] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.275193] pnp 00:02: [dma 4]
[ 0.275194] pnp 00:02: [io 0x0000-0x000f]
[ 0.275196] pnp 00:02: [io 0x0081-0x0083]
[ 0.275197] pnp 00:02: [io 0x0087]
[ 0.275198] pnp 00:02: [io 0x0089-0x008b]
[ 0.275202] pnp 00:02: [io 0x008f]
[ 0.275203] pnp 00:02: [io 0x00c0-0x00df]
[ 0.275225] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.275234] pnp 00:03: [io 0x0070-0x0071]
[ 0.275243] pnp 00:03: [irq 8]
[ 0.275263] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.275269] pnp 00:04: [io 0x0061]
[ 0.275290] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.275296] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.275300] pnp 00:05: [irq 13]
[ 0.275322] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.275431] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.275433] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.275435] pnp 00:06: [io 0x0290-0x029f]
[ 0.275467] system 00:06: [io 0x0290-0x029f] has been reserved
[ 0.275470] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.275531] pnp 00:07: [io 0x0010-0x001f]
[ 0.275533] pnp 00:07: [io 0x0022-0x003f]
[ 0.275534] pnp 00:07: [io 0x0044-0x004d]
[ 0.275536] pnp 00:07: [io 0x0050-0x005f]
[ 0.275537] pnp 00:07: [io 0x0062-0x0063]
[ 0.275538] pnp 00:07: [io 0x0065-0x006f]
[ 0.275540] pnp 00:07: [io 0x0072-0x007f]
[ 0.275541] pnp 00:07: [io 0x0080]
[ 0.275542] pnp 00:07: [io 0x0084-0x0086]
[ 0.275543] pnp 00:07: [io 0x0088]
[ 0.275545] pnp 00:07: [io 0x008c-0x008e]
[ 0.275546] pnp 00:07: [io 0x0090-0x009f]
[ 0.275547] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.275549] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.275550] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.275551] pnp 00:07: [io 0x0800-0x087f]
[ 0.275553] pnp 00:07: [io 0x0400-0x03ff disabled]
[ 0.275554] pnp 00:07: [io 0x0500-0x057f]
[ 0.275556] pnp 00:07: [mem 0xfed08000-0xfed08fff]
[ 0.275557] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[ 0.275558] pnp 00:07: [mem 0xfed20000-0xfed3ffff]
[ 0.275560] pnp 00:07: [mem 0xfed50000-0xfed8ffff]
[ 0.275610] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.275612] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.275614] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.275616] system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.275618] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.275620] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.275622] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.275625] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.275666] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.275690] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.275722] pnp 00:09: [mem 0xffb00000-0xffbfffff]
[ 0.275724] pnp 00:09: [mem 0xfff00000-0xffffffff]
[ 0.275745] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.275772] pnp 00:0a: [mem 0xffc00000-0xffefffff]
[ 0.275807] system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.275809] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.275845] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
[ 0.275847] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
[ 0.275848] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.275850] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.275885] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.275887] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.275889] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.275908] pnp 00:0c: [io 0x0060]
[ 0.275909] pnp 00:0c: [io 0x0064]
[ 0.275915] pnp 00:0c: [irq 1]
[ 0.275945] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.276048] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[ 0.276083] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.276086] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.276183] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[ 0.276185] pnp 00:0e: [mem 0x000c0000-0x000cffff]
[ 0.276187] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[ 0.276188] pnp 00:0e: [mem 0x00100000-0xcfffffff]
[ 0.276190] pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.276230] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.276232] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.276234] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.276236] system 00:0e: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.276238] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.276322] pnp: PnP ACPI: found 15 devices
[ 0.276323] ACPI: ACPI bus type pnp unregistered
[ 0.282821] PCI: max bus depth: 1 pci_try_num: 2
[ 0.282845] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.282848] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0200000-0xf05fffff]
[ 0.282851] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.282853] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.282855] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.282857] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.282860] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.282863] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.282865] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.282869] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf05fffff]
[ 0.282872] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.282877] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.282879] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.282882] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.282885] pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.282890] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.282906] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.282909] pci 0000:00:01.0: setting latency timer to 64
[ 0.282913] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.282919] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.282922] pci 0000:00:1c.0: setting latency timer to 64
[ 0.282926] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.282929] pci 0000:00:1c.5: setting latency timer to 64
[ 0.282934] pci 0000:00:1e.0: setting latency timer to 64
[ 0.282937] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.282938] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.282940] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.282942] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.282943] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
[ 0.282945] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.282947] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff]
[ 0.282949] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.282950] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.282952] pci_bus 0000:03: resource 1 [mem 0xf0200000-0xf05fffff]
[ 0.282954] pci_bus 0000:03: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.282956] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.282957] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.282959] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.282961] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.282962] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.282964] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.282966] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.282967] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xffffffff]
[ 0.282994] NET: Registered protocol family 2
[ 0.283102] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.283911] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.286830] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.287221] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.287223] TCP reno registered
[ 0.287231] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.287261] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.287380] NET: Registered protocol family 1
[ 0.287533] pci 0000:01:00.0: Boot video device
[ 0.287538] PCI: CLS 32 bytes, default 64
[ 0.287587] Unpacking initramfs...
[ 0.316854] Freeing initrd memory: 2536k freed
[ 0.317344] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.317346] Placing 64MB software IO TLB between ffff8800cbf6a000 - ffff8800cff6a000
[ 0.317348] software IO TLB at phys 0xcbf6a000 - 0xcff6a000
[ 0.317656] audit: initializing netlink socket (disabled)
[ 0.317668] type=2000 audit(1331070636.316:1): initialized
[ 0.329229] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.351410] VFS: Disk quotas dquot_6.5.2
[ 0.351460] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.351537] msgmni has been set to 7910
[ 0.351674] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.351694] io scheduler noop registered
[ 0.351696] io scheduler deadline registered
[ 0.351723] io scheduler cfq registered (default)
[ 0.351807] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.351832] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.351871] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.351899] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.351947] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.351975] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[ 0.352104] intel_idle: MWAIT substates: 0x22220
[ 0.352105] intel_idle: does not run on family 6 model 23
[ 0.352132] ERST: Table is not found!
[ 0.352133] GHES: HEST is not enabled!
[ 0.352190] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.423563] Linux agpgart interface v0.103
[ 0.423624] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.423626] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.424352] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.424437] mousedev: PS/2 mouse device common for all mice
[ 0.424487] rtc_cmos 00:03: RTC can wake from S4
[ 0.424570] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.424591] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.424600] cpuidle: using governor ladder
[ 0.424601] cpuidle: using governor menu
[ 0.424761] TCP cubic registered
[ 0.424857] NET: Registered protocol family 10
[ 0.425184] NET: Registered protocol family 17
[ 0.425187] Registering the dns_resolver key type
[ 0.425287] PM: Checking hibernation image partition /dev/disk/by-uuid/5a94d96e-0fdd-425a-91c5-6fe96da349f0
[ 0.442444] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.442457] PM: Hibernation image not present or could not be loaded.
[ 0.442463] registered taskstats version 1
[ 0.453068] rtc_cmos 00:03: setting system clock to 2012-03-06 21:50:37 UTC (1331070637)
[ 0.453104] Initializing network drop monitor service
[ 0.454145] Freeing unused kernel memory: 736k freed
[ 0.454268] Write protecting the kernel read-only data: 8192k
[ 0.458421] Freeing unused kernel memory: 1636k freed
[ 0.460355] Freeing unused kernel memory: 660k freed
[ 0.465585] udevd[37]: starting version 181
[ 0.489348] usbcore: registered new interface driver usbfs
[ 0.489369] usbcore: registered new interface driver hub
[ 0.490707] usbcore: registered new device driver usb
[ 0.492744] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.492777] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.492811] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.492815] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.492852] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.492879] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.497714] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.497902] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.497918] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
[ 0.500931] SCSI subsystem initialized
[ 0.504356] libata version 3.00 loaded.
[ 0.510015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.510276] hub 1-0:1.0: USB hub found
[ 0.510280] hub 1-0:1.0: 6 ports detected
[ 0.510367] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.510390] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.510393] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.510401] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.510423] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.514289] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.514303] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
[ 0.526698] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.526921] hub 2-0:1.0: USB hub found
[ 0.526924] hub 2-0:1.0: 6 ports detected
[ 0.527005] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.527010] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.527013] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.527021] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.527047] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800
[ 0.527239] hub 3-0:1.0: USB hub found
[ 0.527243] hub 3-0:1.0: 2 ports detected
[ 0.527303] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.527308] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.527310] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.527316] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.527341] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880
[ 0.527491] hub 4-0:1.0: USB hub found
[ 0.527494] hub 4-0:1.0: 2 ports detected
[ 0.527547] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.527552] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.527554] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.527560] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.527579] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000cc00
[ 0.527671] hub 5-0:1.0: USB hub found
[ 0.527673] hub 5-0:1.0: 2 ports detected
[ 0.527725] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.527729] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.527731] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.527737] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.527755] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c080
[ 0.527850] hub 6-0:1.0: USB hub found
[ 0.527853] hub 6-0:1.0: 2 ports detected
[ 0.527912] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.527916] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.527918] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.527925] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.527950] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400
[ 0.528041] hub 7-0:1.0: USB hub found
[ 0.528044] hub 7-0:1.0: 2 ports detected
[ 0.528095] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.528099] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.528102] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.528107] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.528126] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480
[ 0.528217] hub 8-0:1.0: USB hub found
[ 0.528220] hub 8-0:1.0: 2 ports detected
[ 0.528277] ata_piix 0000:00:1f.2: version 2.13
[ 0.528284] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.528288] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.528322] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.528959] scsi0 : ata_piix
[ 0.529039] scsi1 : ata_piix
[ 0.529777] ata1: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[ 0.529781] ata2: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[ 0.529808] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.529812] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.529848] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.530605] scsi2 : ata_piix
[ 0.531122] scsi3 : ata_piix
[ 0.531716] ata3: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 19
[ 0.531719] ata4: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 19
[ 0.833346] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 0.860625] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.871253] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.133351] usb 2-5: new high-speed USB device number 4 using ehci_hcd
[ 1.320013] Refined TSC clocksource calibration: 2996.999 MHz.
[ 1.320019] Switching to clocksource tsc
[ 1.326723] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.326735] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.326848] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.326858] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.334172] ata1.00: ATA-7: WDC WD740ADFD-00NLR1, 20.07P20, max UDMA/133
[ 1.334175] ata1.00: 145226112 sectors, multi 16: LBA48 NCQ (not used)
[ 1.347438] ata1.00: configured for UDMA/133
[ 1.347545] scsi 0:0:0:0: Direct-Access ATA WDC WD740ADFD-00 20.0 PQ: 0 ANSI: 5
[ 1.356883] ata2.00: ATA-7: SAMSUNG HD321KJ, CP100-05, max UDMA7
[ 1.356887] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.371850] ata2.01: HPA detected: current 1465147055, native 1465149168
[ 1.371855] ata2.01: ATA-8: WDC WD7500AACS-00ZJB0, 01.01B01, max UDMA/133
[ 1.371858] ata2.01: 1465147055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.376886] ata2.00: configured for UDMA/133
[ 1.390777] ata2.01: configured for UDMA/133
[ 1.390856] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5
[ 1.390990] scsi 1:0:1:0: Direct-Access ATA WDC WD7500AACS-0 01.0 PQ: 0 ANSI: 5
[ 1.393373] sd 0:0:0:0: [sda] 145226112 512-byte logical blocks: (74.3 GB/69.2 GiB)
[ 1.393409] sd 0:0:0:0: [sda] Write Protect is off
[ 1.393411] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.393427] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.393753] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.393840] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.393843] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.393860] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.394066] sd 1:0:1:0: [sdc] 1465147055 512-byte logical blocks: (750 GB/698 GiB)
[ 1.404247] sdb: sdb2
[ 1.404286] sd 1:0:1:0: [sdc] Write Protect is off
[ 1.404290] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.404316] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.410206] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.410713] sdc: sdc1
[ 1.412675] sd 1:0:1:0: [sdc] Attached SCSI disk
[ 1.414632] sda: sda1 sda2 sda3
[ 1.414890] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.483346] usb 7-1: new low-speed USB device number 2 using uhci_hcd
[ 1.675206] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input1
[ 1.675328] generic-usb 0003:046D:C01E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1/input0
[ 1.675340] usbcore: registered new interface driver usbhid
[ 1.675341] usbhid: USB HID core driver
[ 1.847718] PM: Starting manual resume from disk
[ 1.847720] PM: Hibernation image partition 8:2 present
[ 1.847721] PM: Looking for hibernation image.
[ 1.847851] PM: Image not found (code -22)
[ 1.847854] PM: Hibernation image not present or could not be loaded.
[ 1.887347] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.955372] udevd[142]: starting version 181
[ 3.102653] FS-Cache: Loaded
[ 3.138386] RPC: Registered named UNIX socket transport module.
[ 3.138388] RPC: Registered udp transport module.
[ 3.138390] RPC: Registered tcp transport module.
[ 3.138391] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.206448] FS-Cache: Netfs 'nfs' registered for caching
[ 3.340426] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 3.340433] ACPI: Power Button [PWRB]
[ 3.340480] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.340483] ACPI: Power Button [PWRF]
[ 3.367741] iTCO_vendor_support: vendor-support=0
[ 3.368037] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.368042] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f]
[ 3.368043] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.420207] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.420218] ATL1E 0000:02:00.0: setting latency timer to 64
[ 3.460984] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 3.646986] nvidia: module license 'NVIDIA' taints kernel.
[ 3.646990] Disabling lock debugging due to kernel taint
[ 3.658130] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 3.658258] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0860)
[ 3.658557] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.808444] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.808451] nvidia 0000:01:00.0: setting latency timer to 64
[ 3.808456] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 3.808546] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.20 Mon Feb 6 21:07:30 PST 2012
[ 3.922194] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.922239] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 3.922258] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 3.964505] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 4.187852] cfg80211: Calling CRDA to update world regulatory domain
[ 4.420014] usb 2-1: reset high-speed USB device number 2 using ehci_hcd
[ 4.487427] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10B6
[ 4.487464] usbcore: registered new interface driver usblp
[ 4.597153] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.597522] Registered led device: rt2800usb-phy0::radio
[ 4.597538] Registered led device: rt2800usb-phy0::assoc
[ 4.597553] Registered led device: rt2800usb-phy0::quality
[ 4.597572] usbcore: registered new interface driver rt2800usb
[ 4.896528] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 4.931213] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 4.962285] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.004187] Adding 8279036k swap on /dev/sda2. Priority:-1 extents:1 across:8279036k
[ 5.887306] Installing knfsd (copyright (C) 1996 [email protected]).
[ 36.076486] ATL1E 0000:02:00.0: irq 44 for MSI/MSI-X
[ 36.077062] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 50.139089] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 53.445833] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 53.490782] ATL1E 0000:02:00.0: irq 44 for MSI/MSI-X
[ 53.491333] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 53.732458] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 57.151881] wlan0: authenticate with c0:c1:c0:36:e7:5d (try 1)
[ 57.153391] wlan0: authenticated
[ 57.170628] wlan0: associate with c0:c1:c0:36:e7:5d (try 1)
[ 57.174138] wlan0: RX AssocResp from c0:c1:c0:36:e7:5d (capab=0x411 status=0 aid=1)
[ 57.174142] wlan0: associated
[ 57.197936] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 57.264846] Intel AES-NI instructions are not detected.
[ 67.456668] wlan0: no IPv6 routers present
[ 306.299972] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
[ 306.300485] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 310.963856] wlan0: deauthenticating from c0:c1:c0:36:e7:5d by local choice (reason=3)
[ 311.091991] cfg80211: Calling CRDA to update world regulatory domain
[ 311.342430] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 313.239060] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 314.375684] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 314.545703] ATL1E 0000:02:00.0: irq 44 for MSI/MSI-X
[ 314.545818] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
[ 314.581962] ATL1E 0000:02:00.0: irq 44 for MSI/MSI-X
[ 314.582102] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
[ 314.582703] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 314.583112] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 325.469976] eth0: no IPv6 routers present
Last edited by dabbi2000 (2012-03-07 22:57:16)

certainly didn't expect this... turned off power saving
iwconfig wlan0 power off
and all is well again. Surely doesn't explain why it started after kernel update. But it works...

Difference in stock values after MR21 updation

Similar Messages

Maybe you are looking for