Difference in the appearance of HTML vs. Standard reports generated with the Report Generation VIs?
When I generate a "Standard Report" (to a printer or PDF) with the attached code, the output looks like this:
If I instead use the same code to generate an HTML report, the output looks like this:
Can anyone explain why the HTML output has had the extra spaces stripped out of it?
Is there anything I can do to prevent it from happening?
VI is attached (LV v11.0.1f2) but this is what it looks like...
Attachments:
Print Test.vi 47 KB
SteveBale wrote:
If you look at your html source the spaces are there. The problem is the way html is rendered it removes the spaces. You will either need to add in <pre> </pre> tags to tell the browser to include those spaces, or insert the string which the browser interprets as a single space.
Regards,
Steve
OK, thanks. I guess I'll end up living with it the way that it is because
using either method seems to also have the side effect of causing the output to become double-spaced and
the only reasonable place to implement the change (so that it did not also impact the "standard report" output) would be within the report generation VIs and I'd rather not be modifying them.
Similar Messages
-
Upgraded to os7 and done my updates on the apps as they appear.. Any function to do with the iBook store is not working or visible. The purchase at the end of a sample book doesn't work either. Anyone have a solution?
Upgraded to os7 and done my updates on the apps as they appear.. Any function to do with the iBook store is not working or visible. The purchase at the end of a sample book doesn't work either. Anyone have a solution?
-
When I send or receive e-mails, the icon showing that there is an attachment with the e-mail may or may not appear. I have contacted Apple and they do not have a solution for this issue. This is a huge problem for me.
No, the senders are in most case sending from corporate servers which are almost certainly not Mac based. Also, remember this happens when I send or receive. So if I send something with an attachment, the attachment will go through, but the sent box will not show the paper clip icon so that I can distinguish the emails sent with attachments versus the emails sent without attachments. I receive the attachments as well, but again the paper clip icon does not show up so that I can distinguish the emails that I have received that contain attachments. Recipients of my e-mails have complianed that when they receive an attachment from me they do not see the paper clip icon which alerts them to the fact that the email contains an attachment.
-
I updated my mini, but some of my apps are no longer available. One of them I purchased from the Apple store. They are grayed out with the word "waiting" underneath the app. Any suggestions?
If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
How to Solve the Problem of An iPad App Download Stuck on “Waiting”
http://ipadacademy.com/2012/06/how-to-solve-the-problem-of-an-ipad-app-download- stuck-on-waiting
How To Get Rid Of Your iPad App Download Frozen Problem
http://www.sidelineapple.com/how-to-get-rid-of-your-ipad-app-download-frozen-pro blem-and-not-lose-years-of-your-life-video/
Another thing to try - Turn the iPad Off & then back ON.
If that doesn't work:
• Log out of your iTunes store account. Go to Settings > Store > Sign Out Then press the Home button.
• Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
• After restart, the Waiting should be gone.
Cheers, Tom -
Just tried to update my iPad 2 to the current iOS, and I got an error that said the update wouldn't install. The iPad is stuck in a funny mode with the apple and spinning wheel showing. I can't power it down or restart it. What next? Thanks.
Try a hard reset: hold the power and home buttons simultaneously until the Apple logo appears.
-
Question to the forum My question really has to do with the replace stuff
Question to the forum
My question really has to do with the replace stuff from imovie 09
Ok when I pick up the stuff from the event library and pull up to the top it does not replace at play head or end or start
It mainly erases everything that is on there b4 so
So I am not sure
I actually also wanted to know what is the difference of just dragging to the end or end
And all these replacing options like replace at start end or replace alone for that matter ….Hello again. Just to let you know I have solved the problem. Backed up my new phone. Then wiped all settings and everything off it to start again. When it relaunches it gives you the option to download from Icloud and you can pick from which back-up date you want to download it from. Picked the one from the day before it got trashed and HEY PRESTO, we have all the pictures and videos back!!! Iphone 0 - 1 Voodooboy78
I'm sure people will look at this and be like duhhhhhh but to me it is a VICTORY over technology!!! Peace -
My start up disk Macintosh HD is full on my McAir OSX 10.9.4 memory 4GB. I need to clear the disk so that I can update it with the new software IOS 10.9.5 requiring 2.05GB. Need guidance on how to clear space.
For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal. -
My office is setting up a new gateway server. I can connect to the old one just fine, but the new one is not allowing me to connect. I can connect from my Windows VM, but not my Mac Client.
This is the log:
2014-Nov-26 16:09:10] RDP (0): Final rdp configuration used: gatewayhostname:s:gat1.gibbscam.com
screen mode id:i:0
use multimon:i:0
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
audiomode:i:2
username:s:Gibbs\JeremyS
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
bookmarktype:i:3
use redirection server name:i:0
[2014-Nov-26 16:09:10] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 16:09:10] RDP (0): lo0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 16:09:10] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): gif0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): stf0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en1 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6) addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): fw0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en2 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): p2p0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): bridge0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): utun0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6) addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6) addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 16:09:10] RDP (0): correlation id: d8afdeb7-ce3a-ceff-a6e8-51a5d5b40000
[2014-Nov-26 16:09:10] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
PC, and then try again.
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 16:09:15] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Nov-26 16:09:15] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 16:09:15] RDP (0): lo0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 16:09:15] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): gif0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): stf0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en1 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6) addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): fw0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en2 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): p2p0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): bridge0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): utun0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6) addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6) addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 16:09:15] RDP (0): correlation id: 3d81bcf6-8d0e-fba8-b75e-bd2a247c0000
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
[2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
[2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 305
User Message : HTTPEndpointException: 4, The non-proxy http connection failed to connect with the message: 404 Not
Found
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 16:09:16] RDP (0): ------ END ACTIVE CONNECTION ------
And here's a log for server that I can connect to:
[2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used: gatewayhostname:s:gato.gibbscam.com
screen mode id:i:0
use multimon:i:1
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
audiomode:i:2
username:s:Gibbs\JeremyS
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
bookmarktype:i:3
use redirection server name:i:0
[2014-Nov-26 15:52:20] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 15:52:20] RDP (0): lo0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 15:52:20] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): gif0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): stf0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en1 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6) addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 15:52:20] RDP (0): fw0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en2 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): p2p0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): bridge0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): utun0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6) addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6) addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 15:52:20] RDP (0): correlation id: 3bea4411-4b23-c197-9b52-63f948a10000
[2014-Nov-26 15:52:20] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 15:52:25] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
PC, and then try again.
[2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 15:52:25] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Nov-26 15:52:25] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 15:52:25] RDP (0): lo0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 15:52:25] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): gif0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): stf0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en1 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6) addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 15:52:25] RDP (0): fw0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en2 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): p2p0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): bridge0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): utun0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6) addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6) addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 15:52:26] RDP (0): correlation id: 509122b5-d9b1-60f0-a0ac-b75a8dc20000
[2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
[2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
[2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
[2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolConnectingRDP(3)
[2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolInactive(4)
[2014-Nov-26 15:52:28] RDP (0): Server supports RAIL
[2014-Nov-26 15:52:28] RDP (0): Protocol state changed to: ProtocolActive(5)
[2014-Nov-26 15:52:29] RDP (0): Server hides cursor
[2014-Nov-26 15:52:31] RDP (0): Server shows cursor
[2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 15:52:35] RDP (0): ------ END ACTIVE CONNECTION ------
Any suggestions on what I can ask my IT department to change on the server so I can connect would be greatly appreciated.Hi Jeremy,
Thank you for posting in Windows Server Forum.
From the error and other description it seems that there is some misconfiguration with setup. You need to provide the FQDN name of the server as might server name is not resolving its name properly and so facing issue. As seems from below details:
[2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used:gatewayhostname:s:gato.gibbscam.com
screen mode id:i:0
use multimon:i:1
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
Configuration used and full address name both appears different so please verify configuration accordingly.
Please check the DNS record, check certificate whether it match FQDN name of the server with certificate name, also try to check to connect with IP address and see what result you can find.
You can follow below guide to configure RD Gateway and after that verify the result.
1. Deploying Remote Desktop Gateway RDS 2012
2. How To Work with RD Gateway in Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support -
HT201301 how about the Chinese language doc. Able to use with the My Lyric Book program?
how about the Chinese language doc. Able to use with the My Lyric Book program?
I'm not sure where you see that the links I gave suggested that. The iPhoto link (quoted below) in step 4 suggests dragging the library to the new location. You can do that in Finder by dragging the library to the external disk in the Finder sidebar. If you don't have a sidebar in Finder, go to the Finder View menu and click Show Sidebar. If the external disk isn't visible in the sidebar, go to the Finder Preferences, click Sidebar at the top of the Preferences window, and put a checkmark in front of External disks in the Devices section.
You can move your entire iPhoto library to a different computer, a hard disk, or another location on your computer.
Important: Before you move your iPhoto library, it’s a good idea to back it up to a DVD or external hard disk.
Move your iPhoto library
If you’ve created multiple photo libraries, be sure to move only the library currently displayed when iPhoto is open. To move a different library, you first need to switch to it.
Quit iPhoto.
In the Finder, choose your home folder (it’s usually named after you).
Open the Pictures folder (in the home folder) to locate the iPhoto Library file.
Drag the iPhoto Library file to a new location on your computer.
Open iPhoto.
In the window that appears, select the library you want, and then click Choose. -
iTunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved? What information is available besides the "learn more" option that does not deal with the problem?
Many people have the same problem. However, there is little or nothing readily available to users. This problem has existed for two or more years. Does anyone have anything to offer about this disturbing problem?Thanks for the suggestion kcell. I've tried both versions
9.0.115 and 9.0.124 and both fail with the policy permission error.
I also tried with and without your crossdomain.xml file but
with the same result. It looks like this file is intended for URL
policy, instead of socket policy. Recently Adobe separated the two.
When I run with the files installed on my dev PC, it does
work, which makes sense because the flash player isn't loaded from
an unknown domain.
I did get one step closer. If a crossdomain.xml in the server
root exists and the socketpolicy file is loaded from the app folder
then the first two warnings disappear. The logs now show:
OK: Root-level SWF loaded:
https://192.168.2.5/trunk/myapp.swf
OK: Policy file accepted: https://192.168.2.5/crossdomain.xml
OK: Policy file accepted:
https://192.168.2.5/trunk/socketpolicy.xml
Warning: Timeout on xmlsocket://192.168.2.5:843 (at 3
seconds) while waiting for socket policy file. This should not
cause any problems, but see
http://www.adobe.com/go/strict_policy_files
for an explanation.
Warning: [strict] Ignoring policy file with incorrect syntax:
xmlsocket://192.168.2.5:993
Error: Request for resource at xmlsocket://192.168.2.5:993 by
requestor from https://192.168.2.5/trunk/myapp.swf is denied due to
lack of policy file permissions.
Which basically says, everything is okay, but you stay out
anyway.
PS: I found the XML schema files here:
http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security_02.html
and the socket policy schema:
http://www.adobe.com/xml/schemas/PolicyFileSocket.xsd.
UPDATE: When serving up the policy file on port 843 using the
example perl script then the socket connection seems to be accepted
and the connect succeeds. After that flex hangs trying to logon to
the IMAP server. -
SD reports we generated with the the help of ABAPers
What are the SD reports we generated with the the help of ABAPers? How can we modify existing reports?
Hi Gopala.,
Customer uses standard SAP reports if he wants additional reports apart from the functionality provided we functional people give the specifiction to the technical peole ABAPERS reagrding the report we needed and the tables and fields of the particular repot,With the help of that ABAPERS develop Query reports or they create reports
Some reports we also can generate using LIS
REWARD if helpfull
Thanks & Regards
Narayana
Message was edited by:
manam narayana -
I want to upgrade my old airport express to the new express. Can I just switch out the old for the new or must I delete the old network first and start from scratch with the new express?
It is not necessary to delete your old wireless networks first, but doing so may eliminate confusion. If you wish to do that, open System Preferences > Network, and select Wi-Fi from the left column. Click the Advanced... button, then select your old wireless networks and delete them with the "–" (minus) button. Make sure the "Remember networks this computer has joined" remains checked.
OK then Apply.
This prevents your Mac from searching for your previous network which will no longer exist.
A new Express creates an open wireless network that you must select before you can configure it. It appears in your Wi-Fi menu like this:
Select it. AirPort Utility will load and walk you through its configuration.
Edit: If you are really using OS X 10.5.1 as shown in your profile, the above screenshot is not applicable. Instead, select the network called "Apple network nnnnnn" and then launch AirPort Utility. -
My Ipod classic has started to play mono only through the headphones. I have tried different headphones with the same outcome. Is the device repairable or better to upgrade?
Hey Grimeymouse,
Thank you for contributing to the Apple Support Communities.
It sounds like your iPod classic is only playing sound in mono when using multiple headphones.
Since you've likely isolated this behavior to the iPod by trying multiple headphones, see this advice from the "The headphones don't work" section of the iPod troubleshooting basics and service FAQ:
If the issue appears to be with the iPod, try resetting it. If that doesn't work, then restore iPod with the latest iPod software using iTunes 7 or later.
All the best,
Jeremy -
Apple TV is blinking and requesting to connect cable with itunes, why? I do not have the USB cable since it doesn't come with the Apple TV .
Hello folks
I had the same problem today: Apple TV is blinking light and requesting to connect cable with Itunes (Itunes Logo appears)
I solved the problem according Alley_Cat mentioned and described in link bellow:
In my case, I restored factoring setting using a Micro USB Cable connected in Itunes
Follow the steps carefully described in link bellow
Good luck.
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US -
I'm picking up all of the data script related to the sending / receipt of an e-mail along with the e-mail itself and can't find a way of not showing the text. Obviusly only a command but can't find it! Help!
Shift-Command-H is the key-combo to switch 'Long Header'/'Standard Header' .
Long way: Top Menu -> View -> E-Mail
Stefan
Maybe you are looking for
-
How can I change the arrangement of clips in an event?
Hello all, I would like to have the window of clips for my events to be oldest to newest and not newest first. I see where I can arrange the selection of Event either by newest first or last, but I see nowhere that I can do this for clips in an ev
-
Acrobat replaces NTFS permissions of Temp folder
OS: Windows 7 Pro x64 SP1 Acrobat Pro v11.0.1 I have set location of my Temp folder to another drive F:. This folder is pointed by both %TEMP% and %TMP% environment variables. My user (ex. "SomeDomain\SomeUser") belongs to Adminstrators group and set
-
Saving hotspots in JPG files...
I am using PBWorks as a Wiki generator which has a limited graphics editor. What it can do however is import JPG files. So, using Photoshop (I have version CS3) I thought I could take a JPG photo, add hotspots to it and then save it as a JPG before
-
How do you erase an app that wont wiggle.?
Down loaded app and it appeas to be jammed--- Cant erase it
-
Hi there After experiencing the many issues with with the 2008 release I was looking forward to SP1, however there seems to be just as many issues...... Within an hour of using SP1 the application has crashed 3 times and I've found at least 4 bugs.