Difference in UDF's in SAP XI 3.0 and PI 7.0 onwards

Hi Maters,
Can any one tell me what are the exact differences in XI 3.0 and PI 7.0 and the Difference in UDF's in SAP XI 3.0 and PI 7.0 onwards as I have still didnt got a chance to work on PI server.
Thanks in advance
Regards
AB

i have worked with both XI 3.0 and PI 7.0...
but i haven't found any diffrence in UDF's...
Actually there are diffrences mainly in SP's...
XI 3.0
1. J2Se adapter engine was replaced with J2EE Adapter Engine.
2. BPM was available from XI 3.0
3. Part of Netweaver 2004
PI 7.0
1.XI renames as Process Integration
2. Part of Netweaver 2004s.
3. Has all features of XI 3.0 and every SP of Pi 7.0 has a corresponding release for XI 3.0.
4. Runs on WAS 7.0 and has same features as XI 3,0
check these threads for more info..
Re: what is the difference in XI 3.0, PI 7.0, PI 7.1
differnce between SAP-XI and SAP PI
regards
biplab

Similar Messages

How to find the difference in BI Content between SAP ERP 4.7 and ECC 6.0

We are looking at upgrading our SAP system from 4.71 to ECC 6.0, and I have been tasked with determining what new data may become available in our BW system after the upgrade. I was wondering if there was a site that would tell me what new datasources/infoproviders are made available after an upgrade to ECC 6.0.
I do not need to see the list of all Business Content in ECC 6.0, just what has changed.
Also, the type of upgrade we are looking at performing is a "Technical Upgrade", which presumably just upgrades the SAP back end without affecting the front end. Can someone confirm that the new BW content will then be available after a technical upgrade?
Thanks
Michael
PS - our BW system has been on version 2004s for two years now.
Edited by: Michael Frank on Feb 3, 2010 3:07 PM

Hi,
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
-Vikram

What is the difference between SAP NW PI7.1 and PI7.1 EHP1

We have a customer using SAP PI7.1 EHP1. The application to be deployed
isdeveloped on SAP Netweaver PI 7.1 SP06.
We need to know if application developed and transported from PI7.1 is
compatible with EHP1?
Below are the Components used by the application .
1) SSL communication using SOAP adapter
2) Java mapping , Graphical mapping , XSLT mapping
3) Customised EJB modules
4) Adapter framework
5) ALE layer for IDoc communication from ERP to PI
6) RFC lookups to PI system and ERP system.
Questions
1)Will PI EHP1 be able to communicate with PI7.1 using SOAP adapter ?
2) What is the difference between SAP NW PI7.1 and PI7.1 EHP1 ?
Regards,
Sneha

Hi,
EHP Pi7.1 new
IPv6 Support in SAP Systems (new)
Async/Sync and Sync/Async Bridge in the JMS Adapter (New)
High Availability (New) Locate the document in its SAP Library structure
Use
A new concept is available for setting up a high availability environment for SAP NetWeaver Process Integration (PI). To do this, you need SAP Web Dispatcher for load balancing, and you must reconfigure your HTTP, RFC, and RMI connections so that they can be used for load balancing. You must also make various configuration steps in other components of your PI environment.
[Level 4: Document: XML to Text Conversion Module (New)] XML to Text Conversion Module (New)
Message Packaging (New)
Monitoring Milestones (New) Locate the document in its SAP Library structure
Use
You can use the new scenario variant Monitoring Milestones of the Business Process Management scenario to define a monitoring process that can monitor events from different applications. A monitoring process can subscribe to events from SAP or non-SAP systems.
check given Link
http://help.sap.com/saphelp_nwpi711/helpdata/en/61/8c3842bb58f83ae10000000a1550b0/frameset.htm
Regards,
Amit

Difference in SAP R/3 Financials and MY SAP ERP Financials

Hi ALL,
Can any one tell me the difference in SAP R/3 Financial and MY SAP ERP Financial
Thank and Regards
Kedar

My SAP ERP provides additional analytics such as financial analytics, workforce analytics and operations analytics. We get employee life cycle management and employee relationship management and there's a financial supply chain component.
The NetWeaver piece gives you portal capabilities and better integration capabilities for integrating applications with applications from other vendors.
Check out the solution overview in this link.
http://download.sap.com/download.epd?context=34A481C8164156DEF6E507D82889F9F5D8D8F5BC953285A76585EA32C01E3F8A402BF4874B54DC389CD1EB0DCC5C469451499E974252ABDD
Reg,
Arun

What is the difference b/w the sap r/3 platform and netweaver?

what is the difference b/w the sap r/3 platform and NetWeaver.
do both go hand in hand .......
i am relatively new to ESA....
if one want to manage databases will he use sap/3 or NetWeaver...
is NetWeaver is additional functionality incorporated in r/3 to mange it strategies......

Hi,
Check out this forum posting. I think it covers the question - it has been asked a couple of times.
netweaver vs mysap
Cheers,
Mike.

Difference Between SAP ECC 6.0 and SAP Solution

Dear Experts,
   We are in the process of implementing a new SAP Structure.
    We are taking a hosted model from vendor which is called SBH (Subscription Based Hosting) of SAP Solution
So my question to all experts is that, what is the exact difference between SAP ECC 6.0 and SAP Solution SBH model.
   If any comparison chart, it would be helfull.
Do reply asap.
Thanks in advance,
Nilesh Jain

Hi Nilesh,
Looking at the image below, you will find out that ECC6 is under SAP ERP, and SAP ERP is under SAP Solution:
SAP solution is of a bigger element and ECC 6 is a component of it.
Regards,
Rod

Differences between SAP 4.7, SAP ECC 5.0 and ECC 6.0

Hello SAP Gurus,
Could someone please let me explain, what are the main differences between SAP 4.7, SAP ECC 5.0 and ECC 6.0.
Thanks
Sha

Hi,
Check in this link
http://erp.fmpmedia.com/Default.aspx?alias=erp.fmpmedia.com/english

Difference between sap xi 3.0 and sap pi 7.0

hi guys,
what is the difference between SAP XI 3.0 and SAP PI 7.0,and R/3 4.7 and ECC 6.0
regards,
subba reddy

Hi Subba reddy,
Check this link for PI differencess
https://wiki.sdn.sap.com/wiki/display/XI/PI%207.1%20Components%20and%20its%20features%20over%20XI%202.0,XI%203.0,PI%207.0
Regards
Ramesh

What is the major differences between SAP CRM 4.0 and SAP CRM 5.0?

Dear all,
Please let me know the major differences between CRM 4.0 and CRM 5.0 versions?
Your suggestions will be highly appreciated.
Thank you
Raghu ram

Hi Raghu,
In order to find out the differences between SAP CRM 4.0 and SAP CRM 5.0, you will find no better documentation than the release notes availalble at the following link:
[https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000429833&_SCENARIO=01100035870000000202&]
There are several functional improvements, and lot of new functionalites and also better integaration points with SAP ECC. Some of the new features like Visit Planning, Warrenty Claims, Enhanced and easy configurable/ customizable IC Webclient, New concept of Marketing Organization in Org Model. For further information, go through the release notes.
regards
Srikantan

Difference between SAP BI 7.0 and SAP Business objects

Dear All,
I would like to know what is the difference between SAP BI 7.0 and SAP Business objects.What Advantage will we have if we implement sap business objects rather then SAP BI 7.0.WOur management wants to implement

Hi,
Strategies for better reports, queries, Web reporting, formatting, dashboards, cockpits, planning, and performance management
advantages of BO
Crystal Reports XI is the latest version of the report writer from Business Objects. Local reports guru David McAmis takes the new version for a spin.
Most developers might know Crystal Reports from versions included in Studio, Visual Studio.NET, and other popular developer IDEu2019s such as BEA Workshop, C# Builder, Delphi 2005, JBuilder, WebSphere.
In this latest installment both report and application developers have something to be excited about as there are a host of new features for report design and integration. Hereu2019s a run-down of what you can expect in this release.
What's New in Xcelsius version 4.5
Xcelsius now provides the following new components:
Candlestick and OHLC Chart components
The open-high-low-close and candlestick charts are primarily used to display stock data. Each marker corresponds to the four values, which are represented as lines attached to the marker on the OHLC chart and as colors on the candlestick chart. Open displays the opening price of the stock. High displays the highest price the stock achieved on that day. Low displays the lowest price the of the stock on that day. Close displays the closing price of the stock.
For more advantages go through the below link
http://www.crimson-consulting.com/marketing/experience/knowledge/white_papers/cognos_tco.pdf
For BI go throug hthe below link
http://www.elegantjbi.com/Why-Business-Intelligence-better/business-intelligence-advantage.htm
Regards,
Marasa.

Difference between SAP-CRM 2007 UI and previous version UI.

hi,
anyone knows the differences difference between SAP-CRM 2007 UI and previous version UI.
anykind of links or files are helpful.
regards.
raman.

Hi,
actually quite a late response and I think all the rather technically focuses comments have already been given, incl. the link to a really good slide deck, that explains all the technical architecture details on what exactly we did.
From an end user perspective some other statements on what we did:
(1) From an information architecture and visualization perspective we acted based on feedback from our customers in the last years, which led to some restructuring of the screen, e.g. moving the navigation bar from the top area of the screen (horizontal) to the left hand side --> sounds simple but users tend to have problem seeing thing at the top of the screen. We also decided to arrange the information for e.g. an account or an opportunity not in a tab oriented format. Again usability tests in CRM had shown that users often find it hard to see and understand that tabs contain additional information. We now show the details in assignment blocks below the header information in a scrollable format. Vertical scrolling is a behavior of a screen that most users know from their internet experience. Those are just two exampels of what we did in this area
(2) We also have put a large focus on well known web behaviors, like drag & drop and personalization in general, knowing that on the one hand side, no matter what standard UI we deliver, users tend to adapt it exactly based on their needs and wishes. So you will find really easy to understand personalization options everywhere in the new CRM Web Client UI. To achieve this we used lots of web 2.0 techologies that enable especially these easy interactive capabilitites.
(3) Finally, and this relates directly to the arguments mentioned in (2) we focused as well on really easy UI configuration. Again, in every customer project user interface changes are made, to adapt the SAP default to the customers needs. here we invested a lot to make the 60-80% most common UI changes done in projects as easy as possible, that even non-technical people can generally do it (like Power users).
Hope this clarifies some arguments what from the users point of view has been done and what the advantages are.
When you follow the same link as mentioned by Nadine above, you can also find a presentation UI Concept, which explains all the details rather from a users perspective.
Best regards and enjoy the new UI ..and every feedback is very much welcome, only with your feedback we can improve the solution even more.
Ingo

Set User Authentication at Particular UDF or Standard SAP Field?

Hi Experts,
I learn that we can set authorization at UDT by using Additional Authorization Creator.
Is there any method we can set authorization at particular UDF or Standard SAP Field?
For example: my customer just want to make one field in Business Partner to be "READ-ONLY" for certain users, is it possible to be done?
Thanks.
Regards,
Lay Chin

hi
yes if u want to make any additional authorizations in sap related documents or udo you can use additional authorization creator
u would have to check in the test database like the authorization u wana create if it is feasible through inbuilt additional authorization creator or not.
Regards,
Manish

Difference between SAP R/3 , ECC and MySAP

Hi,
I would like to know the difference between SAP R/3 ,ECC and MySAP. Please let me know the difference , the links earlier found were not getting into my brains.
To my understanding the SAP R/3 4.5b,4.6c - earlier versions contains the basic modules like Logistics(MM,SD) and PP (core functional modules), on technical point the little function modules were obsolete in these version.
4.7 (included the Web application server,for web based and integrating with XI,Enterprise core ,Enterprise Extensions ) + core functional modules +.HR + FI/CO+ SCM (MM,WM,PP) + PLM
ECC (Enterprise Core Component) - ?
MySAP - ?
Correct me and also your answer will help me understand better.
Regards
Shawn

ECC 6.0 means it is an latest version of SAP ERP package (ERP Central components). it will support for netweaver and BW.
Chk this links for more details.
ECC 6.0 clarification
Replacement for CONVERT_DATE_INPUT in ECC 6.0
Upgrade from sap 4.7 to ECC 6.0
Upgradation to ERP 6.0 '2005'
Differences between 4.6C and 4.7 EE
To know the functionality changes you can refer:
http://solutionbrowser.erp.sap.fmpmedia.com/
http://www.sap.com/solutions/business-suite/erp/pdf/BWP_ERP2006_Upgrade.pdf
http://service.sap.com/releasenotes
http://service.sap.com/upgrade
Rewards if useful.

Difference between SAP Learning Solution & Training and Event Manag

Hi All,
Can anyone tell me the Difference between SAP Learning Solution & Training and Event Manag.
Which approach would be recommended for the Training and Event Management implementation..
Pls let me know the pro's and con's of both the approaches.
Regards
Vijay

Hi Vijay,
Training and Event Management (now called <b>Training Management (TEM)</b>, sometimes referred to as PE in SAP documentation). Employees/Learners were able to book courses and view their training history via Employee Self-Service, and supported the full suite of classroom training administration functions.
SAPs current learning software is SAPs Learning Solution (LSO). Companies still can use TEM to administer classroom-only training or they can choose to leverage LSO functionality to deliver classroom training as well as Web-based training, virtual classrooms, blended learning, and collaboration to their employees.
Training Management (TEM) serves as the foundation of SAPs Learning Solution (LSO). However, LSO includes much new functionality such as administering and delivering Web-based training, virtual classrooms, curricula, and online tests. The entire LSO consists of SAP Authoring Environment, Content Management System (CMS), Learning Management System (LMS), Learning Portal, Content Player, Offline Player, Business Intelligence (BI), and the Collaboration functionality.
Regards,
Dev

The difference SAP BusinessObjects BI Suite and SAP BusinessObjects EDGE BI Suite

Hi all,
Would you please explain what is the difference of SAP BusinessObjects BI Suite and SAP BusinessObjects EDGE BI Suite..?

Key difference:
Edge BI Suite does not allow you to do clustering of nodes, but the BI Suite does. This flexibility is restricted in Edge - so it's a single server setup.
Both SAP BusinessObjects Edge BI and SAP BusinessObjects Enterprise share the same underlying platform and tools. The difference is that Edge BI is designed and priced for mid-sized organizations, and is therefore licensed differently.
SAP BusinessObjects Edge BI is licensed for both named-user licenses and concurrent access licenses (CAL). While named-user licenses are appropriate for users who are active in the system throughout most of the day, the concurrent access license provides an economical way to support casual system users. A single CAL license will typically support 5-10 users, depending on the type of usage they require.
While Enterprise (BI Suite) can be implemented for unlimited users across multiple servers and includes clustering and failover capabilities, Edge BI is restricted to a single server and a user count more appropriate for mid-sized organizations.
You can always upgrade to SAP BI Suite if requirement grows and easily migrate all of your BI content including users, groups, reports, dashboards and universes.
The decision now depends on your investment and the allocated budget. I hope this helps.

Difference in UDF's in SAP XI 3.0 and PI 7.0 onwards

Similar Messages

Maybe you are looking for