Difference in VAluated and Storage location Stock

Hi SAP Gurus,
I'm facing following problem during viewing Stock on Posting Date (MB5B)
For a perticular material, perticular plant, particular period
When I view storage location /Batch Stock (storage location not specified): Lesser Stock is shown
When I view Valuated Stock stock shown is more.
What may be the problem
Regards

Dear Ranjan,
I am using T.code MC.9 and MC.1
when i am executing the MC.9 for all materials
some of the materials with ZERO stock i mean valuated stock is ZERO but its showing value of the Valuated stock. same case with MC.1 also which is storage location wise
for a ZERO qty in storage location its showing valuated stock,
i have raised an issue to SAP they are working on it , we have open our PRD system to check SAP people.
Regards
venu gopal

Similar Messages

Sales order stock and storage location stock on past date with value

Hi everyone.
I m looking for a report which can give sales order stock with value as it is shown in mb5b and storage location stock with value as in mc.5 is there any report which can give the combination of both the things on past date with values.

can you tell me what shall be the fields and table for special stock on past date with value and sloc stock on past date with value

Stock report in BW (valuated stock and Storage Location level)

Dear All,
            Regards.We got an situation here,
Case 1: R3 (MB5B) (Both "Storage loc" and "Valuated stock" shows the same Stock Qty)
1).The BW Stock Report shows values the Correct Values for "Receipt Qty" and "Issue Qty" with the Correct "Quantity total Stock" aswell.
Case 2 :   R3 (MB5B) (Stock is different between "Storage Loc" and "Valuated Stock")
1).The BW Stock Report shows the "Quantity Total Stock according to VALUATED STOCK Level(MB5B),but the "Receipt Qty" and "Issue Qty" according to STORAGE LOCATION Level(MB5B) .
We followed the "How to Handle Inventory "Doc with the proper sequence of Loading of Infosources and Compression.The data is sitting fine at the cube level.
It would be great if someone can throw some Light on this issue,on how the Query shows a COMBO of both Valuated stock and Storage Location stock....Held up with this issue for quite sometime..Had a look at the   Oss Note (589024)...........
Manythanks
Arun

HI,
In Inventory we have two quantity fields given to satisfy the requirement.
Valuated stock Qty - 0VALSTCKQTY
Storage Location qty - 0TOTALSTCK
You can make use of them based on your requirement. Hope this helps for you.
Thanks,
Arun

Date Wise and Storage Location Wise Stock Qty & Value Report......

Hi Experts,
We want a report Date Wise(As on 31.03.2008) and Storage Location Wise Quantity & Value Report for only Finish Materials. Is there any report ?
From Mb5b we canot get storage location wise report as we get only plant level qty and value.
Pl. guide us.
Regards,
Yusuf

Hi Yusuf,
Try the Tcode: MC.9 there enter the site and article and executeYou will get details of the article
stock, value. if you double click the article you will get the details of storage location.
Hope it will be help for you
Regards
GK

Regarding how enable plant stock and storage location view

hi all:
   Could you please tell me how enable plant stock and storage location view for MM01?
   couldn't be better if there are detailed steps .
   Thank you very much!

Hi,
The views depend to material type. So you need update in the material type attributes.
SPRO - Logistic General - Material Master - Basic Settings - Material Types - Define Attributes of Material Types
Double click on the material type and update the views in 'User Departments'.
Thanks.

Storage location stock with value on a particular date

i m in search of a report or logic which can fetch stock as in mb5b on a particular date. mb5b shows sloc stock but without value and show valuated stock without sloc. can anyone help me out to find such report or give some logic or table from where it can fetch sloc stock with value.
Edited by: Husain Husain on Jan 28, 2010 4:00 PM

Hi,
All the stock related reports like MC.1,MC.5,MCBA etc will give you stock for a particular months range. he only report giving stock on a date is MB5B .However in this report you will not get the storage location stock value.
Now try the report in T Code J3RFLVMOBVED which will serve your purpose .Here in the material parameter tab give your storage location and the date range in the main tab Posting date range and than execute.
Dhruba

MB5B Movment type and storage location is reset

When I run the report MB5B with radio button "valuated Stock" active for a specific Plant and Movement Type, I get a Message "Movement Type is reset" and then the entered Movement Type disappears from the selection criteria.
However the report does not give me this message when the radio button "Storage Location/ Batch Stock" is active.
Also, When I run the report MB5B with radio button "valuated Stock" active for a specific Plant and Storage Location, I get a Message "Storage Location is reset" and then the entered Storage Location disappears from the selection criteria.
However the report does not give me this message when the radio button "Storage Location/ Batch Stock" is active.
Please tell me why does this happen when the radio button "valuated Stock" is active ?

Dear All,
I am facing the problem as said in the thread.
My two queries are as follows:
Query 1: In MB5B report When we select the valuated stock option ,We are unable to use movement type , storage location in the selection criteria nad getting the below messages.
M7284 - Storage location is reset.
M7298 - Movement type is reset .
Query 2 :In MB5B report total receipts and total issues is showing incorrect values.
Here say for example I prepared the grn, cancelled the grn and again made the grn. Here total receipts is considering in such a way that all the grn quantities are considered. and cancelled documents are considered as issues.
ie have received material = 100 Nos 01-12-2009
cancelled grn:100 Nos
Redo grn:100 Nos
Done transfer posting 415 Q = 10 nOS = 02-12-2009
Issued = 10 nos = 02-12-2009
In mB5B 01-12-2009 to 02-12-2009
We are getting Opening stock= 0 which is correct
Total receipts = 100(GRN IST TIME)+100(GR SECOND TIME) +10(TRANSFER POSTING)=210
Total issues = 100(CANCEL GRN)10(TRANSFER POSTING)10(GOODS ISSUE) =120
Closing stock = 90(CORRECT)
Here actual recipt: should be 100
actual issue should be 10
Here though the closing stock is correct , 415 transfer posting is considered as issue and receipt.Becoz of this total issues quantity report is going wrong.
Please give your valuable suggestions to the above two problems seperately.
Regards,

Storage location stocks

hi
Can anyone please help me with this? I am new to MM.
I created a raw material. Unrestricted-use of stock shows :0.
Storage location stock for current period shows all 0s. Where can i enter the stock values for this material.
Thanks
Madhu

Hello Madhu,
Stock value is calculated based on the material price and total stock quantity. In your case you just created Material Master record, so it will not show up the stock value unless you put some the stock in your valuation area (Plant).
There are two ways to get this stock value.
1. Manually upload the inital stock using MB1C / MIGO using mvt type 561, give the external value in local currency (On Qty tab) else price will be taken from material master record.
2. Receive the material with or without purchase order (mvt type 101/501).
1. Create purchase order (ME21N)
2. Crete Goods Receipt (MIGO)
After any of the above option, the stock value will showup in the material master record.
Hope this will help.
Regards
Arif Mansuri
Reward if answer is helpful.

During MRP run unwanted plant and storage location include and exclude

Hi There,
During MRP run how to include and exclude the unwanted plant and storage location pls let me know the required configuration settings.
Thanks in advance.

HI,
To control whether a particular storage location will be included or excluded from the MRP run. (MD02/MD41).
To exclude it from MRP run :-
OMIR - Define storage location MRP per plant
Put the MRP ind. as.         1 - storage location stock excluded for MRP
To include it from MRP run:-
OMIR - Define storage location MRP per plant
Put the MRP ind. as.      space - storage location stock also planned at plant level and save it
Next go to transaction MM01 - tick only view MRP 2
Key in Plant and Storage Location
Look at the Storage Location MRP section
change the SLoc MRP indicator to space and save it
MMD1 - Create MRP Profile - MRP profile is a useful entry aid and makes it easier to manage MRP data.
You define which fields are filled with values when MRP data is entered in the material master record, which of these values can be overwritten and which not.   You use the information stored in a profile is standard information that is needed again and again in similar constellations when material master records are maintained.
Regards
KK

Material transfers between plants and storage locations report

Hello experts.
I´m looking for some help.
Actually i am looking for a report that show information about material transfers between plants and storage locations. Is there any report that shows the source of the material (plant, storage location) and also shows the target (plant, storage location).
Thanks for your help.

Hi,
Though you may not get report for the same , but you can narrow down the check by using the table MSEG or MB51 using the moment types like 311 643 (sd delivery moments )which are for stock transfers .
or if you want storage location stock many reports are available like MMBE, or MB53 etc.
Regards

Plant and Storage Location determination at Item level during Copy control

Hello Freinds,
We are experiencing issues within Sales Order creation when the line item is referencing a contract. The plant and storage location is being determined from the contract - this should not be done, we have an enhancement in place for sales order plant/storage location determination which is how these values should be determined.
Kindly suggest, if it can be achieved through configuration setting at Copy control level, to avoid the Plant and Storage location determination from Contract in to Sales Order.
Thanks,
Anup Bansal

Hello
You can mention the additional logic of redetermining Plant and storage location whenever copied from contract.
In a sale order, i think you are maintaining a enhancement in prog MV45AFZB & user exit userexit_source_determination.
YOu can maintain the coding at same place.
thank you
Anirudh

SHIPPING POINT AND STORAGE LOCATION DETERMINATION IN DELIVERY

i made configuration setting for shipping point and storage location determination during delivery process. still system is not proposing this data during delivery.
due to this reason lot of time is consuming during delivery creation.
plz suggest the complete configuration flow for this determination.

Dear Ram,
Can you please specify the configuration that you have made? And which storage location determination rule are you using for your Delivery Type?
Regards,
Amitabha

Mandatory the Material Quantity and Storage Location Field in Order

Hi Expert,
Please advise. how can i set the Maintenance order,
If Material field is Filled
Then Mandatory the Quantity Field and Storage Location Field.
Thank You
Best Regards

Hello,
Please Use Below User Exits to get your Functionality
IWO10009 --->PM Order Check for 'Save' Event
CNEX0026--->general inspection of material
Regards,
Rakesh

How to get automatic plant and shipping point and storage location

hi,
sap gurus,
how to get automatic plant and shipping point and storage location automatically into the sales order
i have done all the config settings for that
but its not appearing automatically.
regards,
balaji.t

Hi
Balaji...
U can get the plant in sales order, by doing the default the same in customer master or in material master. In customer master -- sales are data--shipping tab delivering plant there u can assign and get the same in order for that customer. it is better to do in customer master rather than in material master.
Shipping point is getting determine in sales order and u can not make it default like plant. Shipping point is determine in the basis of Shipping condition of customer ( ship to party)+ loading group of material + Deliverying plant there u have to assing the shipping point and it will flow in the sales order. Tcode OVL2
For S loc u have to enter manually in the sales order u can not get it automatically.
Hope this will help you.
Thx.

Default Plant and storage location for components in MFBF

Hi,
I have 2 plants 1000-procurement plant and 2000- production plant. I am using special procurement key 70( Withdrawal from alternative plant from 1000 to 2000) for components in Plant 2000. The requirements for the components are transferred from 2000 plant to 1000 plant. The 1000 plant run MRP for the dependent requirements and procure the materials and transferred to the production storage location in Plant 2000.The raw materials are purchased in plant 1000 and transferred to Plant 2000 production storage location based on the manual reservations created with movement type 301. This is fine.
But when I do backflush in MFBF the plant and storage location for the components issue are displayed as plant 1000 which is the procurement plant and the production storage location in plant 2000-production plant location. In the BOM the production storage location is production storage location of plant 2000. Since we use the special procurement key system defaults the plant as 1000(procurement plant) insteadd of 2000(production plant). can we make this plant default to the production plant 2000 as default in the MFBF goods issue screen.
thanks and regards
Murugesan

Hi MURUGESAN !
      Can you give me some information more in Special Procument Configure in plant 2000 like:
          - Procurement type (maybe F)
          - Special procurement (Maybe U)
          - Plant (Maybe 1000).
          - Issuing plant (maybe 2000)
       We will check together.
       Regards,
      Tony

Difference in VAluated and Storage location Stock

Similar Messages

Maybe you are looking for