Difference in workschedule text between T508A and display in IT0007

Hi,
I have made a change in text description for a workschedule in T508A and then transport my change into Test system. But I have now no correspondance between the value in T508A and the value displayed in IT0007 with F4 or when WS selected.
I have tryied to transport again my entry but this is not solving the problem.
Does anyone already have this issue ?
Thanks a lot,
KR
Greg

Hi Gregory,
Please review this thread, your solution is there.
Re: work Schedule rule Text
why don't you debug it?
you can break-point RE508S routines.
MODULE GET_RTEXT INPUT.
PERFORM RE508S USING P0007-SCHKZ.
ENDMODULE.
alternativlely this is the abap select sentence:
CHECK T508S-SPRSL NE SY-LANGU
     OR T508S-ZEITY NE T503-ZEITY
     OR T508S-MOFID NE T001P-MOFID
     OR T508S-MOSID NE T001P-MOSID
     OR T508S-SCHKZ NE T508S_SCHKZ.
SELECT SINGLE * FROM T508S WHERE SPRSL EQ SY-LANGU
                             AND   ZEITY EQ T503-ZEITY
                             AND   MOFID EQ T001P-MOFID
                             AND   MOSID EQ T001P-MOSID
                             AND   SCHKZ EQ T508S_SCHKZ.
CHECK SY-SUBRC NE 0.
CLEAR T508S.
You probably have corresponding entry with no text (if sy-subrc is 0) or no corresponding entries (if sy-subrc has other value than 0).
Good luck.
Cheers.

Similar Messages

Difference in the Balance between FS10N and Customer Balances in Local Curr

Hi,
When i am trying to match the Balances between FS10N and Customer Balances in Local Currency for the Period 8, we are getting the difference, The reconcilliaton Account was changed on 30.08.2010.
Please help Us in tracing the differences between FS10N and Customer Balances in Local Currency.
What could be the possible reasons for the differences..
Thanks

Hi Varshani,
Please use the program/report SAPF070 to compare or reconcile your AR with GL balances. You can use SAPF071 to correct any inconsistencies. Provided below documentation for these programs.
SAPF070 - Compare Documents and Account Transaction Figures
Description
This program compares debit and credit transaction figures in customer, vendor, and G/L accounts with the debit and credit totals from documents posted in the corresponding posting period (accounting reconciliation). The sales totals are also compared for customer and vendor accounts. There is no separate comparison for special G/L transactions.
A comparison for G/L accounts can be made in company code currency and in parallel currencies (such as group currency). A comparison for customer and vendor accounts can only be made in company code currency.
After the program has finished, a message is issued to the user that started the program. This message summarizes the results of the reconciliation.
Output
The program compares the totals of an account on a periodic basis. If the debit and credit total differs between account and documents, the account is printed with the debit and credit totals and the difference.
Differences in G/L accounts are shown per transaction currency. The first line shows the amount in local currency, the second line shows the amounts in transaction currency.
If a document which falls within the selection range is posted during the program run, the program is terminated since a reliable result can no longer be delivered.
SAPF071 - Adjust Balances after Comparing Documents/Transaction Figures
Description
If a financial accounting comparative analysis (SAPF190) or a comparison of documents and transaction figures (SAPF070) shows that there are differences between documents and transaction figures, you can use this program to make an adjustment. The documents form the basis for this adjustment. The program adjusts the (redundant) transaction figures, which are only totals of amounts from documents.
Requirements
All of the following listed requirements must be fulfilled:
1. A financial accounting comparative analysis (SAPF190) or a comparison of documents and transaction figures (SAPF070) must be made, and differences must be found between documents and transaction figures.
2. There must not be any inconsistent documents found. These are listed in both SAPF070 and SAPF190 as well as in this program.
3. There cannot be any problems in the other modules. Caution: You have to check this yourself. Financial Accounting may be correct but the other modules may not be, and this will adversely affect the program run.
4. You can only make the adjustment in the ledgers which are compared by program SAPF070. This is ledger 00 or a user-defined ledger for all parallel local currencies except the group currency. (The program displays these ledgers). You have to adjust any additional ledgers as well as average balance ledgers yourself.
5. No documents during the period in which you are adjusting transaction figures can be archived. Caution: You must ensure that these documents are not archived by establishing appropriate organizational rules and procedures.
Only use this program after consulting with SAP or after checking the prerequisites thoroughly.
You should adjust all differences together for a single company code. By setting the program parameters you can limit the adjustment to G/L currency types or to balances in subledgers.
It is advisable to execute a test run first, which will list any differences that are found.
Further notes - Authorizations
Repair program authorization group (F_005)
Company code authorization (F_BKPF_BUK)
Thanks
Venkata Ganesh Perumalla
Edited by: Venkata Ganesh Perumalla on Sep 28, 2010 1:30 PM

Safari 4 won't render all text between pre and /pre tags

I am unable to read text between <pre> and </pre> tags in Safari 4.0.3 for Snow Leopard. The problem started when I upgraded to Snow Leopard, but I'm afraid I might have corrupted something when I ran a piece of nastiness called Leopard Cache Cleaner that also corrupted some other preferences. I tried deleting .com.safari.plist to no avail. Anyone heard of this problem or have a solution?

I found the solution - it turns out that Safari's "fixed width" font was supposed to be Courier, but for some reason Courier wasn't loading properly. Setting another Fixed width font fixed the problem.

Safari 4 won't accurately render all text between pre and /pre tags

I am unable to read text between <pre> and </pre> tags in Safari 4.0.3 for Snow Leopard. I will only get some of the text but not all. The problem started when I upgraded to Snow Leopard, but I'm afraid I might have corrupted something when I ran a piece of nastiness called Leopard Cache Cleaner that also corrupted some other preferences. Has anyone heard of this odd problem, or have a fix for it? I tried deleting com.apple.safari,plist to no avail.

I found the solution - it turns out that Safari's "fixed width" font was supposed to be Courier, but for some reason Courier wasn't loading properly. Setting another Fixed width font fixed the problem.

RH 10 is suddenly flickering between pagination and displaying

I am trying to work on a topic, but RH 10 is "flickering"... the lower right hand corner status (at the very bottom of the PM pane) is flickering between "Pagination" and "Displaying". The font and font size is flickering, and the Paragraph and Character Styles pod list is flickering from "Normal" thru the list and then back to "Normal" in a split second. I cannot work in the topic...This seems to be happening no matter what topics I'm in... as well as if I create a new topic.
I did some PM organization of images and topics... and it was fine until then. I have made all the updates I can find, restarted my system, uninstalled and reinstalled RH and reapplied the updates.
What the heck is going on? HELP!

Hi there
I'd be shocked (and very skeptical) if someone were to pop in and say something like: It happened because you had... (insert reason here).
The thing is, there are a multitude of things that could be done to a project to cause this or that kind of a result. So all we can do is really guess at things.
So having said that, here's some food for thought.
When you work with RoboHelp, lots and lots of files are involved that track different aspects of the project. The main project database exists as a "ProjectName.XPJ" file. And another database exists as a "ProjectName.CPD" file. I do believe I've noticed that RoboHelp will sort of "flicker" as it attempts to ensure these two files are in sync. Sometimes we find that the .CPD becomes corrupt and will need to be deleted. When we delete it, as RoboHelp opens the project with the missing CPD, it sees the CPD is missing and sets about baking up a fresh one. And that process can cause the flickering as the database is rebuilt. How long it may take and you would see this would vary depending on the complexity of your project.
Not sure if it helps or not, but perhaps it explains why you are seeing what you are seeing.
Cheers... Rick

Two days before my iphone 5 battery was expand and display screen came out and now there has some gap between frame and display.so how it will happen and i already got before months.now i need to backup all the data to icloud before through out.

two days before my iphone 5 battery was expand and display screen came out and now there has some gap between frame and display.so how it will happen and i already got before months.now i need to backup all the data to icloud before through out.
https://www.dropbox.com/home/iphone
https://www.dropbox.com/home/iphonehttps://www.dropbox.com/home/iphone

Make an appointment at the genius bar of your local Apple Store. The phone has a 1 year warranty. If it's no longer under warranty, a replacement is $269.

Difference in WS performance between Search and Retrieve operations?

All,
We are currently working on a new repository and planning to use MDM webservices on top of that repository for searching and retrieving the data.
Now I'm curious about the difference in performance between the Search and the Retrieve operations and also within the Retrieve operation, between the different identification methods (internal ID, auto ID, remote key, unique field and display field).
Because in the webservices guide is stated that the identification methods are listed in order of best performance, but what are these performance differences between these methods (e.g. a retrieve on internal ID is x times faster than a retrieve on remote key which on his turn is x times faster than a retrieve on display fields which on his turn is x times faster than a search operation on same display field).
Of course the performance depends on lot of other things as well, but I just want to get a feeling on the performance related to eachother (keeping all other variables that can influence the performance the same!)!
I hope that any of you has experiences with all possibilities and can share performance measurements between the different operations related to eachother. Thanks in advance.
Regards,
Marcel Herber

Hi,
Did you implment Webservices in your site.
We are also having a similar scenarion where we have to serach a Records in MDM from SAP PI based on the certain criteria. I am concerned about the SAP MDM performance , since we are having heavy amount data being loaded every 30 minutes.
Please let me know the performace aspects of using Webservices.
Thanks
Ganesh Kotti

Difference jb/w text symblosin script and standard text in scripts

hi to all
can u pols explain about the
difference b/w text symblos in script and standard text in scripts

hi
Default paragraph Paragraph set to * in standard text maintenance
If no form has been assigned to a text, the system automatically assigns the form SYSTEM, which contains minimal definitions for text formatting. There are two ways of formatting texts using forms: Use the standard text maintenance to enter and print the text.
Any kind of text can be included in a form. If no object is specified, then TEXT will be used (standard texts).

Text Symbols
Text symbols acquire their values as a result of explicit assignment. To interactively assign text symbols, in the text editor choose Include  Symbols  Text. This method is available for all text symbols belonging to a text module as well as those of the associated form. Values defined in this way are lost when the transaction is left. If you want to print the text module again, then you must enter the symbol values again. The purpose of the DEFINE command is to provide a means of making this value assignment a permanent part of the text, so that the values are available again when the text module is called again. This command can also be used to re-assign a new value to a text symbol half-way through the text. Syntax: /: DEFINE &symbol_name& = 'value'
/: DEFINE &subject& = 'Your letter of 7/3/95' The value assigned can have a maximal length of 60 characters. It may itself contain other symbols. A symbol contained within the value assigned to another symbol is not replaced with its own value at the point at which the DEFINE command is executed. Rather, this replacement is made when the symbol defined in the DEFINE command is called in the text.
/: DEFINE &symbol1& = 'mail' /: DEFINE &symbol2& = 'SAP&symbol1&' /: DEFINE &symbol1& = 'script' &symbol2& -> SAPscript If, however, the DEFINE command is written using the ':=' character rather than the '=' character, then any symbol contained within the value being assigned is replaced immediately with its current value. The assignment to the target symbol is made only after all symbols in the value string are replaced with their values. The total length of the value string may not exceed 80 characters. The target symbol must be a text symbol, as before.
/: DEFINE &symbol1& = 'mail' /: DEFINE &symbol2& := 'SAP&symbol1&' /: DEFINE &symbol1& = 'script' &symbol2& -> SAPmail
Inserting Text Symbols
Procedure
Inserting a Text Symbol
1. Choose Insert → Symbols → Text.
2. Place the cursor on the desired text symbol.
3. Choose Choose.
4. The system inserts the text symbol.
Editing the Value of a Text Symbol
1. Choose Insert → Symbols → Text.
2. Choose Edit value bearbeiten. The dialog window Value definition for symbol <text symbol> appears.
3. Enter the appropriate value definition.
4. Choose Continue. In the dialog window Text symbols the specified value appears after the name of the text symbol.
5. Choose Continue.
Deleting all Text Symbol Values
1. Choose Insert → Symbols → Text.
2. Choose Delete all values. The system deletes all defined values.
3. Choose Continue.
Using Formatting Options for Text Symbols
1. Choose Insert → Symbols → Text.
2. Choose Options. The dialog window Formatting options for <text symbol> appears.
3. Fill in the fields.
4. Choose Continue.
5. Choose Continue. The system executes the selected formatting option.
regards
ravish
plz reward points if helpful

Differences in sort order between iTunes and iPod

Can someone explain how the sort order of artists / albums works? It seems that it is different between iTunes and the iPod. In iTunes (7.3.1) I can enter data in the fields for Artist, Album Artist, Sort Artist and Sort Album Artist. When I get the tracks to appear in the order I want in iTunes, it doesn’t seem to transfer across to my iPod. I know there are some differences in how the sort order works in both, but how is it different?
John.
Dell 5150 Windows XP

ou must have an older iPod.
I believe the new sort order only works on the new iPods (Nano and Video)

Difference in PL/SQL between 8i and 9i

Hi
Where can I find the exact differences in PL/SQL alone between 8i and 9i from developers point of view.
I appreciate your help
Thanks

Well, you would find it at the most obvious place - The Oracle documentation, where else?
http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96624/whatsnew.htm#967650

Store Hindi Text in SQLServer and Display in JSP

I've list of users for which I'm preparing objects of User class in which the user name is stored in hindi text.
In the servlet which is storing the values in the database, the code is
User = new User();
user.setName(java.net.URLEncoder.encode(request.getParameter("userName"), "UTF-8"));I've submitted *कैसे हो* It is stored in the database in the following format
*%C3%A0%C2%A4%C2%95%C3%A0%C2%A5%C2%88%C3%A0%C2%A4%C2%B8%C3%A0%C2%A5%C2%87+%C3%A0%C2%A4%C2%B9%C3%A0%C2%A5%C2%8B*
When I get the data from the database and create user object and then stored it in a vector and put it in session.
In the JSP,
user.getName()is displaying
*%C3%A0%C2%A4%C2%95%C3%A0%C2%A5%C2%88%C3%A0%C2%A4%C2%B8%C3%A0%C2%A5%C2%87+%C3%A0%C2%A4%C2%B9%C3%A0%C2%A5%C2%8B*
and
java.net.URLDecoder.decode(user.getName(), "UTF-8")is displaying
à¤à¥à¤¸à¥ à¤¹à¥
I tried using
request.setCharacterEncoding("UTF-8");in the servlet and
<%@page pageEncoding="UTF-8" contentType="text/html; charset=UTF-8" %>in the JSP.
Any suggessions?

hi ravi...
i had also did the same one but not in Hindi it is in Chinese language.before inserting the data into database we need convert hexadecimal code to your hindi string and you store that hex decimal value into database.
when you retrive data from database again u convert this string to general integer format and display it.
observe the below code..
public String settingValue(String call) {
 System.out.println("String Value in setting::\n" + call);
 String chineseName = "";
 StringTokenizer unicodeArray = new StringTokenizer(call, "\\\\u");
 while (unicodeArray.hasMoreTokens()) {
 String s = (String) unicodeArray.nextToken();
 System.out.println("\nValue In setting Value::" + s);
 chineseName += unicodeTochineseCharacter(s);
 return chineseName;
public static String unicodeTochineseCharacter(String unicode) {
 String output = "";
 try {
 System.out.println("\nValue In U2C::" + unicode);
 char i = ' ';
 i = (char) Integer.parseInt(unicode.trim(), 16);
 output = String.valueOf(i);
 System.out.println(" before returning..." + output);
 } catch (Exception e) {
 System.out.println("Exception In Unicode to Chinese::\n" + e);
 return output;
 }let me know weather you need any other details...

Difference in event handling between Java and Java API

could anyone list the differences between Java and java-API in event handling??
thanks,
cheers,
Hiru

the event handling mechanisms in java language
features and API (java Application Programming
Features)features .no library can work without a
language and no language has event handling built in.
I am trying to compare and contrast the event
handling mechanisms in the language and library
combinations such as java/ java API.
all contributions are welcome!
thanks
cheersSorry, I'm still not getting it. I know what Java is, and I know what I think of when I hear API. (Application Programming Interface.) The API is the aggregation of all the classes and methods you can call in Java. If we agree on that, then the event handling mechanisms in Java and its API are one and the same.
So what do you want to know?
%

Add text item data and display the output in another text item

Hi! All,
I have four text item. like HA,DA,basic_salary and total_sal.I want to add the data entered in the text item in HA,DA,basic_salary and display in total_sal text item.How can I do this.Please help in this matter.
Thanks,
Abha

1.Select the text item TOTAL_SAL
2.Open property palette
3.Under Calculation node
Set calculation mode as Formula
Set Formula as nvl(:ha,0)+nvl(:da,0)+nvl(:basic_salary,0)

Maximum distance between workstation and display?

Help, I need to know what is the maximum distance you can have between your computer and your 30" cinema display. I would like to keep all of the functionality like USB and Firewire ports. Unfortunately, I cannot find this info anywhere on Apple's website.

Sure, I would bet that solution would work. What is the limit though? Here is the deal, my boss wants to put keyboard, mouse, tablet and display in a nice room. He also wants the computer to be in another room about 40 feet away. Can I successfully span that distance? I want to keep all of the functionality like USB and Firewire ports on the Cinema Display. Can I do this? Is there a distance limit that I can tell him?

Select Date between range and display

Hello - i need some ideas to the following:
I need to create a form to submit some information, with the
date that form was submitted, to a database using php.
Once the form is submitted i need to retrieve multiple rows
from the database based on a selected date range, and display the
information
Question one - any ideas on the flow that i need
question two - how do you think that i best record the date -
given that i need to select a range later.
question three - how do I select mutiple rows give a range of
dates
Thanks

Hello - i need some ideas to the following:
I need to create a form to submit some information, with the
date that form was submitted, to a database using php.
Once the form is submitted i need to retrieve multiple rows
from the database based on a selected date range, and display the
information
Question one - any ideas on the flow that i need
question two - how do you think that i best record the date -
given that i need to select a range later.
question three - how do I select mutiple rows give a range of
dates
Thanks

Difference in workschedule text between T508A and display in IT0007

Similar Messages

Maybe you are looking for