Difference of Properties field when

HI Experts,
I would like to ask what is the purpose/ difference when you check/ uncheck Close properties range as well as choose between OR or AND, when generating Purchase Analysis by Items with properties.
Thanks.

Hi Don,
Select the logic Link between the selected properties. Select And to minimize the selection so the selected business partners are only those that contain all the selected properties in the properties window. Select Or to expand the selection so each business partner who has at least one of the selected properties will be included in the selection.
Arbaaz.

Similar Messages

Difference between the Field Group and Internal Table.

Hi all,
Can anybody tell me the difference between the Field group and Internal table and when they will used?
Thanks,
Sriram.

Hi
Internal Tables: They are used to store record type data in tabular form temporarily in ABAP programming. Or we can say, it stores multiple lines of records for temporary use in ABAP programming.
A field group is a user-defined grouping of characteristics and basic key figures from the EC-EIS or EC-BP field catalog.
Use
The field catalog contains the fields that are used in the aspects. As the number of fields grows, the field catalog becomes very large and unclear. To simplify maintenance of the aspects, you can group fields in a field group. You can group the fields as you wish, for example, by subject area or responsibility area. A field may be included in several field groups.
When maintaining the data structure of an aspect, you can select the field group that contains the relevant characteristics and basic key figures. This way you limit the number of fields offered.
Regards
Ashish

Condition type field when Define Pricing Procedure Determination

Hello Gurus,
there is a condition type field when Define Pricing Procedure Determination. what does it mean ?
Many thanks,
Frank Zhang

Here is are the details of various fields while configuring pricing procedure.
A. STEP
This indicates the number of step-in the procedure.
B. COUNTER
This is used to show a second ministep
C. CONDITION TYPE
This is the most important component in the pricing procedure. The rates are picked up from this element, on the basis of the properties described.
D. DESCRIPTION
This forms the description of the condition type.
E. FROM
This is used to define the progression of the calculation and range of subtotals
F. TO
This is used to define the progression of the calculation and range of subtotals
G. MANUAL
This function enables to allow the condition type to be entered manually also apart from automatic pickup.
H. MANDATORY
This function identifies the conditions that are mandatory in the pricing procedure. The sales price is a mandatory condition type.
I. STATISTICS
This can be used to represent the cost price of the material sold, generally used for study statistical impacts of price
J. PRINT
The activation of this function will enable the printing of the values and conditions to the document.
K. SUBTOTAL
A key is assigned from the drop down menu; this can be used by the system in other area like Sis for reporting purpose also
L. REQUIRMENT KEY
This function is used to assign a requirement to the condition type. This requirement can be used to exclude the system from accessing the condition type and trying to determine the value. This can be used to specify that the condition type should only be accessed if the customer has a low risk credit.
M. ALTERNATE CALCULATION TYPE
This function allows you use a formula as an alternative in finding the value of the condition type, instead of standard condition technique. this can be used to calculate complex tax structures.
N. ALTERNATE CONDITION BASE VALUE.
The alternative condition base value is a formula assigned to a condition type in order to promote an alternative base value for the calculation of a value.
O. ACCOUNTS KEY
The account keys form part of account determination. These keys are used here to define the posting of the revenue generated to respective account heads& to subsequent assignment to GL accounts.
PR00- ERL
K007/KA00- ERS.
KF00- ERFu2026u2026u2026u2026.& so On.
P. ACCRUAL KEY.
The accrual keys form part of account determination. These keys are used here to define the posting of the revenue generated to respective account heads& to subsequent assignment to GL accounts and payment to respective parties.
Kalpesh

How can I remove ASCII text from a field when I use it in a query

How can I remove ASCII text from a field when I use it in a query?
I am running a select statement on a table that appears to have ASCII text in some of the fields. If I use these fields in the where statement like the code below nothing returns:
SELECT FIELD1 FROM TABLE1 WHERE FIELD1 IS NULL
But the field looks empty if I do a straight select without the where clause. Additionally, one of the fields has text but appears to be padded out with ASCII text, which I need to strip out before I can use this field in a where or join statement. I have tried using a trim, ltrim, rtrim, to_char, nvl, decode and nothing works. When I use excel to run the same query it looks as if these ASCII fields are boxes.
I have asked our DBA team to see what they can do to prevent these from going into the table, but in the mean time I still need to run this report.
Do you have any suggestions?

Can you provide an example? I've been trying (for
example) "select translate(' test one', ascii(' '),
'X') from dual" with no luck.
Thank you.To replace space, you should query like this:
select translate(' test one', chr(32), 'X') from dual instead of select translate(' test one', ascii(' '), 'X') from dual Thanks,
Dharmesh Patel

How to give error message for the screen element text field when wrong i/p

How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar Shukla

Hi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla,

How to put Sales employee (Splcode) Mandatory Field, when adding A/R invoice

Hi,
Kindly solve, How to put Sales employee (Splcode) Mandatory Field, when adding A/R invoice.
Regards,
Rajeev.

Follow this step..
1. In SQL Server, go to the SAP B1 Database you're using.
2. then on the Object Explorer , go to Database Folder, explode the SAP DB->Programmability->Stored Procedures->SBO_SP_TransactionNotification * the only Stored Procedure that is allowed to be edited. Just right click and modify
3. Try to paste this -> and click F5
If
@object_type ='13' and @transaction_type in ('A','U')
Begin
If EXISTS
select DocEntry from ONIV
Where DocEntry = @list_of_cols_val_tab_del
and SlpCode<>'-1'
Begin
set @error_message = 'Please select the Sales Employee'
set @error = 1
END
END
Regards
Kennedy

HT1386 I can no longer see anything in the "Manually Added Songs" field when managing music on my iPhone4.

I can no longer see anything in the "Manually Added Songs" field when managing music on my iPhone4. why?

If you are using iTunes Match, your songs are long gone.
iTunes Match is now a streaming service, with no regards to letting you download individual files.
Otherwise, I'm sorry for wasting your time.

What is required in the HOST and QUEUE field when ...

Hi
When setting up my printer, i fill the options identical to what follows:
PRINTER: SAMSUNG HOME
DRIVER:    GENERAL
BEARER: LPR <-----------------------------( NOT SURE IF IT IS THE CORRECT OPTION TO SELECT )
The following fields appear once LPR is selected:
ACCES POINT : HOME
HOST:              WHAT COMES HERE?
USER:              SKY00BER
QUEUE:            WHAT COMES HERE?
ORIENTATION: PORTRAIT
PAPER SIZE: A4
if it helps, my printer is SAMSUNG CLX-3175FW. It is Wifi Enable and is connected to my HOME acces point.
please do correct me if there has to be changes to the BEARER or anything else.
i could really use some help.
thanks in advanced.

sky00ber wrote:
Hi,
What is required in the HOST and QUEUE field when setting a WIFI printer?
When setting up my printer, i fill the options identical to what follows:
PRINTER: SAMSUNG HOME
DRIVER:    GENERAL
BEARER: LPR <-----------------------------( NOT SURE IF IT IS THE CORRECT OPTION TO SELECT )
The following fields appear once LPR is selected:
ACCES POINT : HOME
HOST:              WHAT COMES HERE?
USER:              SKY00BER
QUEUE:            WHAT COMES HERE?
ORIENTATION: PORTRAIT
PAPER SIZE: A4
if it helps, my printer is SAMSUNG CLX-3175FW. It is Wifi Enable and is connected to my HOME acces point.
please do correct me if there has to be changes to the BEARER or anything else.
HELP URGENTLY NEEDED!
I'm not sure but I give it a try.Turn your security(WPA/WEP) and Firewall temporarely off. HOST is the IP address of the printer. QUEUE can be YES or a specific amount of prints, like 1,2,3......
If I look at the manual of your printer I see that you can find the IP and MAC addresses in the Network Configuration Report.I don't know what the USER is doing there because if there is a user then there must be a password.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

How update area field when geometry is updated

hi all,
plz can someone help me to find solution or give me a way to solve my problem
i would like to create procedure to recalculate the area of geom and insert it the value in the specified field when the geom is updated.
I try 2 methods but no one works, the error appears if i update the geometry of parcel
------------------------------------------PL/SQL------------------------------------
----------------------------------------Oracle 9i---------------------------------------
CREATE OR REPLACE TRIGGER "GIS"."TRG_PARCEL" BEFORE
INSERT
OR UPDATE ON "PARCEL" FOR EACH ROW DECLARE
BEGIN
IF INSERTING THEN
select SDO_GEOM.sdo_area(geom,0.05) into :new.fld_AREA
from parcel where id_parcel = (select max(id_parcel) from PARCEL) ;
ELSIF UPDATING THEN
-----------------1st case to try ------------------------------
UPDATE PARCEL a
SET fld_AREA = (select SDO_GEOM.sdo_area(a.geom,0.05)
from parcel a where NOT SDO_GEOM.RELATE(a.geom,'EQUAL',val_new,0.005) = 'EQUAL' )
WHERE NOT SDO_GEOM.RELATE(a.geom,'EQUAL',val_new,0.005) = 'EQUAL';
-----------------2nd case to try ------------------------------
SELECT SDO_GEOM.SDO_AREA(c.geom, m.diminfo)
into :new.fld_AREA
FROM PARCEL c, user_sdo_geom_metadata m
WHERE m.table_name = 'PARCEL' AND m.column_name = 'GEOM'
AND old.geom <> :new.geom ;
end if;
end;
thnx for all
Geomaticien TN

Hello,
You may try the following:
CREATE OR REPLACE TRIGGER "GIS"."TRG_PARCEL" BEFORE
INSERT OR UPDATE ON "PARCEL" FOR EACH ROW DECLARE
BEGIN
:NEW.fld_AREA := SDO_GEOM.sdo_area(:NEW.GEOM,0.05);
END;
Thanks,
Ying
Edited by: user704655 on Jul 22, 2009 11:37 AM

Formatting of text fields when exporting from InDesign to Acrobat Pro

How does one preserve the formatting of a text field when exporting from InDesign CS6 to Acrobat Pro? It loses both the font and the alignment formatting in the PDF.

Use a font that allows embedding/ check the font embedding settings in the PDF output settings.
Mylenium

How do I change default settings in the author field when I edit or insert a comment in a PDF?

How do I change default settings in the author field when I edit or insert a comment in a PDF?

Generally it gets this info from the Identity in the preferences. Unfortunately, I know of no way to change the Login Name that shows up in the comments. I need to look at newer versions of Acrobat on other machines, this is AA8.

How to set old content for a field when cancel?

Hallo,
i have a jdialog form where i can change the content of a field.
when i close the form with cancel i will bring the old content back.
how can i do that?
thanks in advance. any help is appreciated.

Huh? Just don't update the content when the dialog is dismissed by pressing 'Cancel'.
To get better help sooner, post a SSCCE that clearly demonstrates your problem.
db

Set the default field value to transaction code field, when calling from WD

Hi all,
Can we pass the value in a input field of a standard transaction calling from WD application. Suppose we are calling a transaction VA03 in an external window, then how will be pass the value in the VBAK_VBELN screen field.
Is there any way to pass the value to this transaction field. I have also tried out to set the parameter ID 'AUN' for VA03 transaction VBELN field. But it did not work for me.
Is there any way to set the default field value to transaction code field, when calling from WD?
Please suggest, if anyone have any idea.
Thanks
Sanket

Hi,
I am using the below code to open a standard transaction. It will help you to explain my point more easily.
DATA: url TYPE string,
          host TYPE string,
          port TYPE string.
*Call below method to get host and port
cl_http_server=>if_http_server~get_location(
     IMPORTING host = host
            port = port ).
*create URL
CONCATENATE 'http'
'://' host ':' port
'/sap/bc/gui/sap/its/webgui/?sap-client=&~transaction=' 'VA03'
   INTO url.
*get the window manager as we are opening t code in external window.
DATA lo_window_manager TYPE REF TO if_wd_window_manager.
DATA lo_api_component TYPE REF TO if_wd_component.
DATA lo_window TYPE REF TO if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
call the url which we created above
lo_window_manager->create_external_window(
EXPORTING
url = url
RECEIVING
window = lo_window ).
lo_window->open( ).
Note*
One more query I want to add to this thread, that is there any possibility to call a custom transaction as well?

How to set the value that appears in the 'Reply To' field when sending Mail.

I send my mail from one email address (i.e. server) but I want replies to go to a different email address (i.e. server). Apple Mail facilitates this but only when I remember to type the email address into the 'Reply To' field when I compose the message. The email address that I want people to reply to is always the same. Is there anyway to make this appear as tyhe default in the 'Reply To' field when I create a new message?

Please go to this link and you will find out:
https://www.macupdate.com/app/mac/27025/secrets
This is very usefull to set hidden parameters

How to validate the field when i am populating the data cursor to block

Hi,
I am populating data cursor to multi record block.
Block contain 5 items. I am populating data cursor to block for 4 items. User will enter one item value that is quantity field.
If user enter negative values and decimal points in quantity filed i need to display message to user item level.
Please do the needful how to do it.

902434 wrote:
Hi,
I am populating data cursor to multi record block.
Block contain 5 items. I am populating data cursor to block for 4 items. User will enter one item value that is quantity field.
If user enter negative values and decimal points in quantity filed i need to display message to user item level.
Please do the needful how to do it.If you want to validate at entry level then use When-Validate-Item trigger and check the input and show message. Like
If :quentity <0 then
message('do not enter negative value');
message('do not enter negative value');
raise form_trigger_failure;
end if;Why u open same thread again ? not closing one.. check this one
</a>
How to validate the field when i am populating the data cursor to block
Hopes this helps
If someone's response is helpful or correct, please mark it accordingly.

Difference of Properties field when

Similar Messages

Maybe you are looking for