Difference old and new transfer

I will find out the fifference between old and new transfer process.
On one hand I know the old works with update rules an inforsource and transfer rules. the new one has an transformation and a dtp.
also I know that there are update rules for direct writing and update rules for flexible writing.
direct is for hierarchies also and flexible is to change data before the target.
So my question:
I wrote that I need Update Rules when I want to write from master data while loading data into a charakter. I wonder is the name flexible update rule here used in the same way as transformation rule? or do i really have to use the old transfer 3.x?
At least the question: What is the real difference between direct or flexible update rules and a transformation?
Why can'T I load a history with a transformation and with flexible update rules? Why do I have to use direct update rules?
I would be very happy if you tell me that update rules and declaring rules in transformation means the same... but i think it is not like that..

In BI 7.0 we have DTP to load data. In transformation we have start routine, end routine and transfer routine.
You can go through these links:
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=32737032
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417800)ID0190221850DB00612828832805035416End?blog=/pub/wlg/6772

Similar Messages

  • Difference when using old and new PCA datasources

    Hello experts,
    We have implemented the new PCA datasources provided by business content version 3.3. We have built a new infocube (ZPCA_C01) as we were not concerned about the appropriate performance of these new datasources 0EC_PCA_3 and 0EC_PCA_4.
    After loading the new cube (ZPCA_C01) with the new datasources 0EC_PCA_3 and 4, we made a comparison to the content of the old cube 0PCA_C01, that was loaded with 0EC_PCA_1.
    For thesame period (2005.001-002) there is a difference between the contents of the cubes. When checking the results I found that this may be caused by the fact, that 0EC_PCA_4 does not populate "Total credit postings" and "Total debit postings" fields in the new cube, however, we have a couple of records in table GLPCA, where ACTIV = 'PRC4', and that have a corresponding record in GLPCT, where there is a figure in
    TSL02 field. It results in the fact that>
    - 0EC_PCA_1 extracts the figure from GLPCT for Posting Period 2,
    - 0EC_PCA_4 does not extract the same figure from GLPCA.
    Can you please help me with the above problem? Do you know how Credit and Debit figures get to BW from GLPCA, where ACTIV='PRC4'?
    Thanks,
    Csaba

    user10871298 wrote:
    Hi
    I am exeuting a trigger and while retrieving a date field from it using :OLD and :NEW variables, it leaves the timestamp part.
    for example,the actual value for start_date field in the table is '10/12/2005 7:04:25 PM', but when I use :NEW.start_date , it returns only '10/12/2005' .
    How to make it return the timestamp also?
    Thanks.How are you determining that it's missing the time component from it?
    If it's a DATE datatype then it will have both date and time components. If you take that and store it in a DATE datatype column then that too will store the date and time components. If you then go and view that data, it will have both date and time components unless you have your local settings (NLS settings etc) set so that dates are displayed without the time portion. That doesn't mean the data is not there, but that you are not displaying it when you query it.

  • T.code FF7A: how to see old and NEW open items?

    Hi All,
    I've filled the "Cash Managemeng Group" in the master data of a Customer.
    The report Cash Manag.& Forecast doesn't update its old open line Items.
    Only the documents successive to the insertion of the "Cash Managemeng Group" in the master data are updated in the report.
    Could anyone tell how to obtain all the items (old and new) in the report?
    Thanks
    Gandalf

    There are a couple options depending on the additional details of your situation....
    Within t-code FDFD, there is a button labeled Data Setup.  This button is intended for use when cash management (CM) is activated for an existing company code and CM needs to be updated with transactions created prior to the activation.  It deletes all data in cash management for the Co.Cd. and then builds the CM data for all GL, customer and vendor accounts.  There are also options to update CM for other areas (Sales, Procurement, Treasury, etc.)
    Also within t-code FDFD, there is a button labeled Correct Data.  This button can be used instead of the Data Setup button, if the CM data for a particular area needs to be corrected.  This function has the following options:  All GL accounts, All GL accounts with open items, All GL accounts w/o open items (non-open item managed accounts), All Customers/Vendors, All Customers, All Vendors.
    It's best to run these functions when transactions are not being created on the system.
    Regards,
    Shannon

  • Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

    Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

    You're not addressing Apple here. This is a user-to-user technical support forum. If you want to contact Apple, use the Contact Us link at the bottom right of every page for information on how to do so.
    Best of luck.

  • Please help me to merge two places.sqlite to get my old and New history at the same time, every time i rename my two places.sqlite to see my old and new history

    every time i rename my new places.sqlite to see my old history and come back rename old places.sqlite to see my new history, i tired and i found No Way to merge two places.sqlite :( but it's must be found this way for The PPL to see their old and new history :(
    Thank You all in Advance

    You can't merge history otherwise then using Sync to store the history and bookmarks of one places.sqlite on the Sync server and then disconnect.<br />
    Copy the second places.sqlite file to your Firefox profile folder with Firefox closed.
    Then setup Sync once again using that account and merge the content on the Sync server with your computer.
    * Merge this device's data with my Sync data

  • I accidently created a new apple account on my new phone, How do I merge my old and new accounts

    I had an old account but had lost access to the email. In frustration I created a new account to use with iTunes on windows. Now history repeats itself and I've a new iPhone 4 that I want to load with data from both old and new accounts. Do I need to just go to the Genius bar next time I'm in town or is there some way to log into each account, back up the data and merge to the new account?

    Actually not trying to merge the accounts, but back up the DATA i have stored in those accounts. Once I've pulled the many songs I purchased under the old account I'll burn them to something and delete the old account... and I think I've just answered my own question.
    i.e. Don't try to merge anything, just salvage music and other data (contacts, notes)

  • How to fetch  old  and  new value  from of a   field(non-key)  from LOGDATA

    Hello SDNers,
    i  m fecthing LOgdata  from  dbtlog table[in  our  case  the  log  is  not  getting  Updated  in CDHDR  and CDPOS table]
    i  m  using  the  same  logic  as  it  is  used  in  RSVTPROT
    but  the  problem  is
    "  IT  is  fetching  OLD  and  NEW VALUE  after  Update from same  field LOGDATA  of  dbtlog  table BUT  when i  used  same  logic  it  is  FEtching  only  OLD  VALUEs,
    CAN  U  GUYS  PLS  TELL  ME  HOW TO FECTH  OLD  VALUE  and  NEW  VALUE  of a PArticular  field(non-key field, fecthing  key  field  is  not an  issue) From LOGDATA  field  of DBTLOG.
    thx  a  lot  in advance
    Regards
    Kuldeep

    Hi,
    May be this link is useful to you.
    a®

  • Error : Old and new exceptions cannot be used at the same time.

    HI ALL,
    i build a new exception class with message class and i want to replace the
    old exception that i had in the method ,what i did is delete the exception from the method
    signature and add the exception class .
    the problem is that when i try to activate the method i get error :
    Old and new exceptions cannot be used at the same time.
    CALL FUNCTION 'CALCULATE_HASH_FOR_CHAR'
          EXPORTING
            alg            = 'MD5'
            data           = iv_iss
          IMPORTING
            hash           = lv_issu
          EXCEPTIONS
            unknown_alg    = 1
            param_error    = 2
            internal_error = 3
            OTHERS         = 4.
        IF sy-subrc <> 0.
          RAISE EXCEPTION TYPE cx_user_mng EXPORTING
          textid = cx_user_mng=>wrong_isrs.
        ENDIF.
    I want to use the new exception class ,
    how can i avoid this error ?
    Best Regards
    Edited by: Joy Stpr on Jul 22, 2009 2:56 PM
    Edited by: Joy Stpr on Jul 22, 2009 3:16 PM

    Hi Joy,
    Check this link.
    [Old and New Exceptions Cannot be used at same time|Urgent problem, give me a hand;
    Old and new exceptions cannot be used the same time, what does this mean???
    Regards,
    Lakshman.

  • HT5548 I upgraded one of my programs and now the old and new both appear on launch pad, and I can't delete the old one.  Is there a way I can do that?

    I upgraded one of my programs and now the icons for both old and new appear on the launch pad.  I don't need or want the old version to display, as it's been imported into the new one.  I can't seem to figure out how to edit it off the launch pad.

    Hi there,
    More then likely, the old version was installed independently from the App Store. The article below goes over the process for removing these application.
    OS X Lion: Install, update, and uninstall apps
    http://support.apple.com/kb/ph4524
    To uninstall other apps, drag the app to the Trash (the Trash is located at the end of the Dock), and then choose Finder > Empty Trash.If you change your mind, before emptying the Trash, select the app in the Trash, and then choose File > Put Back.Warning: When you empty the Trash, the app is permanently removed from your computer. If you have any files that you created with the app, you may not be able to open them.
    Hope that helps,
    Griff W.

  • My airmac no longer finds cameras.  Will find iphone, but no longer photos either. My Canon Power Shots, old and new, are as good as rocks.

    Recently my MacBook Air  does not list devices that are cameras.  It used to, but does not now.  I have recently a) used MacKeeper, b) deleted movies, photos (thousands of those spawning ones) for space, c) installed ios 7 on my iphone, d) bought a Canon Power Shot SX 170is. 
    Image Capture, Image Browser EX, iphoto--nothing gets photos...nothing sees photos residing on my Canon PowerShots (old and new) or my iphone.  Macbook Air can not find cameras.
    Help.  All cameras are rocks now.

    MacKeeper is considered Malwear and has destroyed many iPhoto libraries - read the user tip on it - https://discussions.apple.com/community/ilife/iphoto?view=documents - my best guess is that your problem was caused by MacKeeper - I suggest you remove it according to the instructions in that user tip
    to  test depress the option key and launch iphoto - create a new library and see if it works correctly with your cameras - post back with the results
    LN

  • How can I find my email in Apple Mail from before my company switched hosting providers?  People with Outlook have all of their old and new emails.  My old emails have vanished from Apple Mail.

    How can I find my email in Apple Mail from before my company switched hosting providers?  People with Outlook in my company have all of their old and new emails.  My old emails have vanished from my Apple Mailbox on my macbook and other Apple devices.  I do not have my mail backed up in time machine recently nor did I export my emailbox recently.  Any ideas?

    Try looking in your User folder.
    Either hold down the option key while using the Finder “Go To Folder” command and select your user Library in your home folder or use the Finder “Go To Folder” command and enter ~/Library/Mail/V2
    If you prefer to make your User library permanently visible, use the Terminal command found below.
    Show User Library
    You might want to bookmark the command. I have to use it again after every update. I have also been informed that if you drag the user library to Finder it will remain visible.

  • My phone has been changed under warranty by the apple store in germany. ı need a change document to register the phone in my country again. ımeı numbers of old and new must be in the document.you can send an mail in pdf format as soon as possible please.

    my phone has been changed under warranty by the apple store in germany.
    ı need a change document to register the phone in my country again.
    ımeı numbers of old and new must be in the document.you can send an mail in pdf format
    as soon as possible please.
    your's respectfully.
    new phone serial no:DQ******TC0
    old phone serial no:DN*******T9Y
    Product:
    iPhone 4S
    Serial Number:
    DN*******T9Y
    Service Requested:
    December 3, 2012
    Status:
    Repair Complete
    <Edited by Host>

    No we cannot send it to you because we are users just like you and Apple does not monitor these forums.
    But you can find the IMEI numbers yourself. Read the ENTIRE article:
    http://support.apple.com/kb/HT4061

  • How to get the old and new statuses of CAD indicator (DRAW-CADKZ) while changing the status of document (DRAW-DOKST)?

    I want to delete the originals of document while changing the status of document based on CAD indicator status. For this I have implemented BADI DOCUMENT_STATUS01 and the method AFTER_CHANGE_STATUS. From this, the BADI is triggering whenever I am changing the document status and I can able to delete the originals. But here my requirement is to check the CAD indicator status to delete those originals. I.e. whenever the document status will change first time the CAD indicator status will also change. Based on that old and new status of CAD indicator I have to do delete operation.
    If anybody has an idea about SAP documents please help me
    Thank you,
    Regards,
    Ramesh

    First the document is exists in SAP in FR status. But when the CAD system will connect to SAP then the status is changing from ‘FR’ to ‘IN’ after that the CAD Indicator is populating from Blank to ‘X’.
    I want to know in which place the CAD indicator value is changing (any user exits available or any BADI s available when changing the CAD indicator) when connected to CAD system.

  • Fetching old and New Data in HRMS for 'Update' Transactions

    Hi All,
    I need to find out the old and new values for a person_id from HRMS tables (Per_all_people,Address,contacts etc) based on Person Id. Do we have any Standard Script or has someone prepared such script and can share with me. I am not expecting the Corrected records to be fetched as it overrides the same line but atleast for such records which comes under 'Update'.
    For Example, If for Perso_id 123, the Telephone# was 8888 and then it is updated to 9999. So my query Should return somethign like:
    Information From To Effective Date
    Telephone 8888 9999 28-Nov-2011
    Note: Can't use any triggers.
    Thanks

    Hi,
    You need to include a new keyfigure in the cube and map with both the new and old compcodes and the write a field routine with the logic that meets your requirement by passing the values of  PSPNR into the internal table and get the output for the keyfigure value. Also you use if else condition as per the requirement.
    Hope this helps...
    Rgs,
    Ravikanth.

  • TS1389 I am trying to authorize my new computer to download all old and new songs From my library

    How do I authorize my new computer so I can download my old and new songs off my library

    Authorization and Deauthorization
    See iTunes Store- About authorization and deauthorization for Macs.
    See How to Authorize or Deauthorize iTunes | PCWorld for Windows.
    In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it.
    More On De-authorizing Computers (contributed by user John Galt)
    You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
      1. Open iTunes on a computer
      2. From the Store menu, select "View my Account..."
      3. Sign in with your Apple ID and password.
      4. Under "Computer Authorizations" select "De-authorize All".
      5. Authorize each computer you still have, as you may require.
    You may only do this once per year.
    After you "de-authorize all" your authorized computers, re-authorize each one as required.
    If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.

Maybe you are looking for