Difference​s btw stb and digital adapter

can someone clarify what are the main differences  between a stb and a digital adapter besides size and price.
i know you cant receive any hd signal right?

 DCT-700 Standard Definition Digital Adapter
(Dimensions: Width: 5.50” (13.97 cm), Depth: 6.60” (16.76 cm), Height: 1.75” (4.45 cm), Weight: ~0.85 lbs (~0.39 kg))
 Features:
 Can decode and play all Standard Definition (SD) channels
 Has Coax Out (Screw in) and Composite Out (Yellow, White, Red) to TV
 Is much smaller than our other Set Top Boxes (STBs)
 Restrictions:
 No High Definition (HD) content support
 No data features whatsoever (No Program Guide, VOD, Widgets, Games or IPTV)
 Cannot participate as a video client in a Multi-Room Digital Video Recorder setup (MR-DVR)
 Cannot view photos or stream music or videos from Home Media on the customer’s PC
 There are no buttons or displays, just a Power light – it requires the Verizon remote to operate
 QIP-2500 Standard Definition Digital Set Top Box
(Dimensions: Width: 14.72” (37.4 cm), Depth: 10.00” (25.4 cm), Height: 2.75” (6.9 cm), Weight: ~5.5 lbs (~2.50 kg))
 Features:
 Can decode and play all SD channels
 Has Coax Out, Composite Out, and S-Video Out (Round plug with 4 pins in it)
 Has full data features – IMG, PPV, VOD, Games, Widgets and IPTV all work fine
 Can participate as a video client in a MR-DVR setup (SD recordings only)
 Supports Digital Optical Audio and Digital SPDIF (also known as Coax Digital) Audio
 Restrictions:
 No HD content support
 Cannot view photos or stream music or videos from Home Media on the customer’s PC
Also there are DVR and HD stbs etc -- if you want any info on them just let me know.  That is just the comparison of the digital adapter and standard stb.
Message Edited by DzWR on 04-17-2009 03:04 PM

Similar Messages

  • What is the Difference between AQ adpater and JMS adapter??

    What is the Difference between AQ adpater and JMS adapter in BPEL11g??
    In what scenarios we go for AQ and for what scenarios we go for JMS adapter???

    Go for AQ when using Oracle Advanced Queueing (the database stuff).
    Use JMS when using JMS (in memory of file queues)
    hth,
    Peter Paul

  • Is there a difference between SPDIF Optical and Digital Optical

    i want to connect my tv's audio output to my home theater
    i have a vizio tv, on the back of it, it says SPDIF OPTICAL OUT
    and on the back of my panasonic home theater system it says, DIGITAL AUDIO IN, i tried connecting an optical cable and the sounds from my won't still go through the home theater system speakers.
    i'm just wondering, is there a difference between SPDIF OPTICAL and DIGITAL OPTICAL?
    ports look like the same.
    Solved!
    Go to Solution.

    smileemile wrote:
    i want to connect my tv's audio output to my home theater
    i have a vizio tv, on the back of it, it says SPDIF OPTICAL OUT
    and on the back of my panasonic home theater system it says, DIGITAL AUDIO IN, i tried connecting an optical cable and the sounds from my won't still go through the home theater system speakers.
    i'm just wondering, is there a difference between SPDIF OPTICAL and DIGITAL OPTICAL?
    ports look like the same.
    Nope, two names for the same thing.
    You may have to change some settings of either the TV or the Panasonic system to output to the optical port (TV) and input from the optical port (surround receiver).
    *disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

  • Recording to VCR using Digital Adapter

    I've been kicking around getting the digital adapter instead of the STB for 2 of our TVs (they're in an office and guest room).  I understand we wouldn't have the interactive guide, PPV, etc.
    BUT- what I don't know is can you schedule the VCR to record with the digital adapter without first changing the channel on the digital adapter?
    For instance, can I schedule the VCR to record channel 15 at 8pm and channel 72 at 10pm without user-intervention between the 2 recordings?  How does the digital adapter get it's channel changed first to 15 and then later to 72?
    Thanks.
    Solved!
    Go to Solution.

    The short answer is no...
    The digital adaptor, if you dont get too technical, is still just another cable box.  IT decodes and then sends the signal to the VCR so as far as the VCR is concerned it cannot tell the difference between the STB and Digital adaptor. So you have to set your VCR to record channel 3 and then set the adaptor to the channel you want recorded.
    Now I'm sure there is a way if your bound and determined by getting things like IR blasters and remote channel changers and whatnot but your looking at more equipment and probably getting further into it than it would be worth.

  • Comapre HTTP adapter and SOAP adapter.

    What is the advantage of SOAP adapter over HTTP adapter in IDOC_To_webservice Scenario? Also give some comparison between them.

    Hi
    Ref this
    /people/padmankumar.sahoo/blog/2005/02/15/an-overview-of-soap --> Overview of SOAP
    this link for more differences..
    SOAP and HTTP adapter
    Check this thread....
    Difference between SOAP and Http Sender
    HTTP Adatpter Vs Soap Adapter
    HTPP Adatpter Vs Soap Adapter ????
    Plain HTTP Adapter vs SOAP Adapter with regards to SSL
    Plain HTTP Adapter vs SOAP Adapter with regards to SSL

  • Could someone help me to clearly distinguish between SOAP and HTTP adapter?

    In which scenarios we can go for HTTP adapter and when to go for SOAP adapter?

    Hi Lekshmi !!
    A SOAP message will be bundled inside the soap envelope.HTTP is not an adapter in adapter engine whereas soap is an adapter i.e, HTTP doesn't require a communication channel where as SOAP requires.You can send soap messages using some SOAP client.
    SOAP Adapter is used to xchange SOAP messages bw remote clients and webservices....
    check this link for more differences..
    SOAP and HTTP adapter
    When you need to Send Data to XI from a Webservice , your SOAP adapter is used.
    HTTP adapter is used when you want to post a HTTP request message from a web application to XI.
    How can i make use of SOAP Sender Adapter without using any tools like XML Spy etc....
    XML SPy is used as a TEST tool when you are sending SOAP information to XI. TO actually send data , you need to configure a webservice and construct a SOAP request message and post the data .
    we use SOAP adapter when we need to connect to remote system or use Webservices in these cases we use SOAP adapter.
    HTTP Adapter is used by extenal systems to connect to Intergartin server using native HTTP Interface.
    the http adapter is a service which is directly connected to integration engine. Adapter Framework (Java) isnt involved. It is much more performant than SOAP adapter.
    The SOAP adapter is written in Java and is responsible for the SOAP envelope around the real XML message. You can build/remove that envelope as well in the mapping and use instead http adapter. But standard for webservices is using SOAP adapter.
    Check this thread....
    Difference between SOAP and Http Sender
    HTTP Adatpter Vs Soap Adapter
    HTPP Adatpter Vs Soap Adapter ????
    Difference between SOAP and Http Sender
    Difference between SOAP and Http Sender
    Plain HTTP Adapter vs SOAP Adapter with regards to SSL
    Plain HTTP Adapter vs SOAP Adapter with regards to SSL
    Hope it clears your doubt !!!!
    Questions are welcome here!!
    <b>Also mark helpful answers by rewarding points </b>
    Thanks,
    Abhishek Agrahari

  • The difference between SOAP adapter and WS adapter in PI 7.1

    Hello all,
    can anybody explain what is the main difference between SOAP adapter and WS adapter in PI 7.1?
    I have checked this [link|http://help.sap.com/saphelp_nwpi71/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm]
    but was not able to find the real difference.
    Or better, what can I do with WS adapter I can't do with SOAP adapter? What are their advantages/disadvantages?
    Thank you all, Igor.

    In addition to RM, ws adapter also support other ws standard like SAML which is not available in SOAP adatper. Beside:
    if your sender or receiver is SAP system, you can also monitor the message in the sender/receiver in addition to the PI box. This is a very good thing, because sometime the MONI in PI shows nothing wrong, but the MONI in your receiver will show you error message that's only related to the receiver system.
    However, if you define ws sender CC, and your ws client doesn't support RM, you will have issue sending ws request.
    And ws CC will generate ws runtime in PI box, if your configuration is wrong (like user name and password not correct), even if you correct it, the ws runtime sometime won't be regenated based on the correction. In this case you need to delete the ws CC/agreement, and re-create it with all correct information.
    Beside make sure your basis team configured the PI system properly regarding ws. If not, you will have lot of pain to figure the problem which was my case.
    Jayson

  • I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD.

    I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD. Also, I can not afford an expensive camera and need some advice on which of the available cameras would be best and also work well with a Mac. One last issue, I currently use a Panasonic #CCD camera that takes a tape. When I load video to Final Cut the audio and video are out of sinc. Go figure. Can anyone help with these questions. Karen

    Hello Karen,
    If you are using Final Cut Express, then look for camcorders that are AVCHD camcorders.  Look especially for the AVCHD logo and specific mention of AVCHD in the specs.  Most of the major manufacturers produce good quality camdcorders - Canon, Sony, etc.
    Also, be aware that there are a lot of "not quite AVCHD" camcorders on the market (sometimes they say they record video as MPEG4-H.264/AVC) - buyer beware!
    Most everything you are going to find on the market today is HD, which stands for "high-def".
    Regarding your question about the Panasonic camcorder, it's best if you post that as a separate question, and please identify the specific model camcorder and the Easy Setup you are using in FCE.

  • AirPlay Mirroring and Output via Digital Adapter at the same time

    Hello,
    Is it possible to use AirPlay Mirroring to an apple tv and the digital Adapter at the same time?
    We want to get the Screen on a beamer and a tv at the same moment.
    If this isn't possible are there any chances to get AirPlay mirroring working on two Apple TVs at the same time?
    We are using the newest iPad Air
    Greets

    Unfortunately not. One output is supported at a time. But perhaps you can use some sort of an HDMI signal splitter? I've not tried it, and perhaps it won't work at all, but you might try outputing directly to a splitter that then can be connected to both a TV and beamer.

  • Difference between webservices model and adaptive  webservices model

    hi
        Can any one explain me regarding Difference between webservices model and adaptive  webservices model.
    Thanks

    Hi,
    In old WS Model, ithere was no concept of logical destinations.
    There if you are using a WSDL located on a server and if the location of the WSDL
    changes, your application won't run. The deployed application using the WS Model will have trouble finding
    the WSDL. As a result you'll have to again import the
    model. Moreover old WS Model does not have re-import functionality.
    But incase of AWS Model, you can desine logical destinations and even if the location of the WSDL changes, all you have to do is change the new url in the Visual Admin and not import the model again.
    You can visit the following link for more details:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b04308ed-62d5-2910-b3a6-c26771b1c78e
    Regards,
    Nidhi

  • Digital adapter and invalid format with Sony bravia tv

    I recently purchased an iPad 2 and the digital adapter so I can play what's on my ipad2 on the tv.  I have a 26' Sony Bravia tv model kdl-26m4000 and when I hook up the iPad with the digital adapter with a hdmi cable the tv says "invalid format".  I somehow got it to work once but I can't get it to work again. I tried the adapter on another Sony Bravia tv that is 52' and it connects without a problem. I also used it on another Sony tv while on vacation without a problem. Does anyone know why I can't get it to work on my tv. The 52' Sony Bravia tv that it works on is older then my tv so I'm not sure what the problem is. I took the digitl adapter cable back to apple to get a new one and it still doesn't work. 
    Any help would be greatly appreciated.

    Dsaamgel24-
    The mention of VGA was to give you something to look for.  It is not likely that an HDMI port would have that problem!
    For purposes of troubleshooting, you might try swapping the HDMI ports.  If both ports work the same with both the iPad and the Blu-Ray, then there is probably nothing you can do to make the iPad work with that TV's HDMI.
    Does that TV have any other video inputs?  Apple also has adapters for VGA, Composite and Component Video.  They will not have as high a video quality, but may work.
    Fred

  • Difference btw BOE and LC ?

    Hi all,
    Whats the difference btw BOE and LC ?? As I am not having good domain, plz if anyone having some good documenattion regarding general workflow in companies, plz send me to [email protected] or paste here.
    Suresh

    Check the below link .May be useful.
    http://www.netmba.com/accounting/
    Regards
    Aravind

  • Difference between HTTP adapter and SOAP adapter

    Hi All,
      Can any one tell me abt what is the main difference between HTTP adapter and SOAP  adapter.when we'll use these eactly?
    Thanks
    pullarao.

    Hi Rao,
    Please go through the below links to understand it:
    https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1442 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
    More links for SOAP Adapter:
    /people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/fdca3f01f33e1ce10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/frameset.htm
    More links on HTTP adapters.
    /people/siva.maranani/blog/2005/09/15/push-data-to-mvc-architectured-application-using-xi
    /people/prasadbabu.nemalikanti3/blog/2006/02/27/collecting-and-bundling-vendor-records-from-different-multiple-interfaces-file-systempeoplesoft-and-sending-to-sap-r3-system-part-2
    Regards,
    Subhasha

  • Difference between OA Adapter and DB Adapter

    Hi All,
    i am very new to SOA, Let me know the difference between OA Adapter and DB Adapter.
    thanks
    Hari

    The EBS (OA) Adapter is mainly a sort of wrapper around DB and AQ adapter supporting the different interfaces of EBS including Business Events(AQ).
    The adapter introspects the Integration Repository. And it sets the responsiblity/application context for you when connecting. The ebs-user and responsibility are set in the wsdl. Using the database adapter you should take care of that yourself.
    Honestly, if you're basically using custom-plsql api's or the pl/sql api's of ebs (eg. TCA) then you're perfectly fine with the DB-adapter. The only thing is that you should set the responsiblity in the pl/sql yourself (for example in the intialization block of the pl/sql package).
    Regards,
    Martien

  • Difference between AQ Adapter and JMS Adapter

    Hi All,
    i am very new to SOA. let me know the difference between AQ Adapter and JMS Adapter.
    thanks
    Hari

    Please go thru the bellow link
    http://www.mscd.edu/~ittsdba/oradoc817/ois.817/a83729/adois07.htm#408020
    Krishna

Maybe you are looking for

  • Windows Vista and Windows 8

    I have a Windows Vista Full Installer disc and a Windows 7 Upgrade Disc. I am currently running a Mid-2012 MacBook Pro 13" with Mountain Lion, Boot Camp Version 5. Can I install Windows Vista through Boot Camp, then upgrade to Windows 7 or Windows 8

  • Help me convert filename .jpg.xml to a format i can manipulate

    i have to access some photos from a file with an extension .jpg.xml. how do i convert this to something i can use. im so lost with tech stuff

  • CrystalDecisions.Shared.CrystalReportsException: Load report failed

    Hi All, I am new to Crystal Reports.. i want to load .rpt file from C# windows application.......i created a form and added crystal report viewer and i tried to load the .rpt file giving following error. And this rpt file loading in anther machine in

  • Java BeanShell

    Hi again. Is it possible to use a java beanshell in jcreator??? I use an option called "Interpret" in xemacs which enables me to test individual classes without having a main test class. Does jcreator have this facility?? Thanx

  • Can't download photoshop after buying it.

    After i bought the softwear, there is a blue button that says download. I click it adn a pop up comes up ans says, "There is no application set to open the URL aam://SAPCode=PHSP?productVersion=14.0 passPhrase=TeuTAXMv4bHaRkv0EduA1zpkrAfm+wj+uPmYmSJv