Differences between 10G intallations for vista and other windows systems

I need Informations about how the installationfiles for vista are differing from the files to install oracle on other windows systems.
And why can't i simply install Oracle Database 10g release 2 (10.2) for Microsoft Windows on a Windows Vista System.
Message was edited by:
user585666

Because Microsoft has changed the API with Vista - the system calls that programs such as Oracle (and Symantec, Word Perfect, and so on) use to performs their operations.
It is a strange thing indeed that things stop working when a program (such as Oracle) asks "fetch me data from disk" and the operating system says "fetch has been changed to get and I no longer respond to fetch"
Also because Microsoft has changed the security model, and requests made by Oracle are now denied due to insufficient, or differences in, security.
An analogy - you have a device with a plug to use in North America. Why can you not simply plug it in to the wall socket in other countries?
The information you need should probably come from Microsoft, not Oracle.

Similar Messages

  • Is there a difference between microsoft office for mac and for windows?

    As a college student it's important that everything is equal for windows and mac for using instructions. So i am wondering if theres a difference between microsoft office for mac and for windows?

    There are differences between the two version of Office. If you need to be exactly like the Windows version, you will have to run Windows on your Mac.
    Allan

  • Is there is any difference between iPhone4 made for Ukraine and for India?

    I would like to know about the hardware / software difference between iPhone4 made for Ukraine and for India.
    I purchased my iPhone4 in Ukraine and now I'm in India, and here due to restart problem I visit to a local delear/shopkeeper and he replaced some parts of my device with damaged one (crack screen, etc etc) and told me that it is a scrap and need another iPhone4 to replace some parts of it. Now this cell is totally brick, I can't check the EMEI of that device {because now its not booting} and he didn't accept that he replace some/all parts of my device.
    So, I want to know that is there is any way to locate these parts?

    Anu Tiger wrote:
    I told you earlier Sir that this device is made for HongKong market but purchased in Ukraine.
    You said:
    I would like to know about the hardware / software difference between iPhone4 made for Ukraine and for India.
    You also said:
    I visit to a local delear/shopkeeper and he replaced some parts of my device
    Apple does not sell iPhone parts. You no longer have an iPhone. You have an unsupportable frankenphone.
    Go back to whoever opened it up and attempted to repair it. Your phone is not supportable here.

  • Difference between cost center for material and sale order

    Hi,
    I'm having an issue related to profit center. Our business of Reverse Logistics Process is taking the wrong profit center which should be taken from sale order master data, not from material master data as currently. As a developer, I'm confused the definition of profit center in this case. What are the differences between the profit center defined in sale order and in material ?
    Thanks,
    Paulb

    Hi Paul
    SAP allows you to change the PC in the sales order... If you dont change, it adopts the PC from Mat Master
    You can define substitution of PC for sales order in 0KEM and assign them in 0KEL... You can change the PC based on Sales Org, Dist Channel, Division, etc
    For a more complex logic, you can also use an exit
    br, Ajay M

  • Difference between Decimal places for  Quatities and Units

    Can anyone please explain the difference between the followings -
    1. Number of Decimal places for  Quantities, and
    2. Number of Decimal places for Units
    In SAP B1 2007B General Settings.

    Hi,
    The Decimal places in the general setting indicates
    Amounts:Display of row and document details
    Prices:Display for price fields in documents,item  data,price lists
    Rates:Display of decimals in currency calculation
    Quantity:Display of quantity in documents and item data
    Percent:Display used in calculation of tax amounts and discounts
    Units:Display used in units(UoM) of items.
    Also refer these note:[737880|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0000737880]
    Hope this is helpful

  • Difference between Callable Object for execution and Display

    Hi,
             I am new to Guided Procedures.When i am creating a callable object under an Action ,i find callable object for execution and callable object for display in the dropdown.What is the difference between the two types of callable objects.
    Thanks,
    Bala

    Hi Bala,
    GP comes with a set of registered callable object types that define which applications you can directly expose as callable objects and enable their handling in the context of GP processes.
    So the different COs can handle your specific application requirements or process flow requirements appropriately at runtime.
    You refer those COs in actions. To make the action functional, you attach at least one callable object to it. In addition to the object that is executed when the action is called, you can attach a callable object that is displayed after the execution. The first one is mandatory. You must attach a callable object for execution. It can be either a callable object with a visible part, such as a Web Dynpro or BSP callable object, or one for background execution.
    Optionally, you can attach a callable object for display. It is required to have a visible part – for example, you cannot select a callable object for background execution.
    At runtime, this object is displayed if the processor wants to open the process step after it has been completed, or if a process contributor has view permissions on the action.
    To make it easier, I will give you an example with submitting and approving a composite form. Say, the employee fills in an order for something, submits it and the manager then approves or rejects it.
    First, in order for the employee to view the form, you can use a Form Display callable object as a display callable object for actions where the execution object is a form. It displays the name and description of the form and provides a link for download. If the user has view permissions on the step, he or she can view the display object and download the form itself. So, this CO is connected basically with the user experience and what he/she sees displayed on the screen, no matter what happens in the background (e.g. you can have a pre-filling service in the background that prefills some fields of the form, but what the user sees is only the form fields with certain info already prefilled in them).
    Next, for the manager to approve or reject the form of the employee, you need a CO that is only for execution, for example a Process Control CO for File Approval For forms, you can use it in a process in which a form is sent by e-mail. As soon as the form is submitted back to the system, the receiver can view it, save a copy of the form, and depending on his or her decision, can approve or reject it.
    This really is a very simplified example, but I hope it helped a little in some way or another
    Here is a link to the Callable Objects in GP documenatation, hope it also clears up some questions:
    http://help.sap.com/saphelp_nw70/helpdata/en/d2/d174413aff5458e10000000a1550b0/frameset.htm
    Also, a link to the documentation for exposing COs:
    http://help.sap.com/saphelp_nw70/helpdata/en/08/d88041a17e060de10000000a1550b0/frameset.htm
    HTH:)
    Greets,
    Petra

  • Difference Between Flash Cs6 on Mac and on Windows.

    I have a Mac and I am using Flash Professional Cs6 on it. I will have to use to on a Windows computer soon and i don't know whether it will be the same on that too. Can you please tell me what are differences in Flash Cs6 Mac version and Flash Cs6 Windows version. Please reply soon. It's urgent.

    *use it on a

  • What's the difference between END-TO-END SSL and other SSL?

    Could anyone summarize all of the differences?
    Thanks a lot! Points guaranteed.

    Hi,
    SSL end-to-end means that the web dispatcher is just forwarding the
    HTTPS requests to the backend system without unpacking / decrypting the data.
    This can be configured by icm/server_port_<XX> = ...,PROT=ROUTER,..
    To be able to configure the ROUTER protocol on the web dispatcher you also
    must have configured HTTPS / SSL on the relevant backend system.
    Configuring SSL "only" means that the web dispatcher is listening to HTTPS and you can decide with the relevant parameters, if the communication to the backend is HTTP or if it is again reencrypted using HTTPS.
    This would end up in using the parameter icm/server_port_<xx> = ...,PROT=HTTPS,....
    Kind Regards
    Thomas Alt

  • Difference between Excise duty on Setoff and Excise duty on Inventory

    Hi,
    What is the difference between Excise duty for Setoff and Excise duty for Inventory?
    regards,
    sathya

    hi Sathya
    Excise duty on set off means the values goes to a particular G/L and take the credit of it whie selling the material. Excise duty on inventory means your value will get loaded to your inventory. In case of duties on set off, you define your own account keys against condition type in tax procedure and G/L is assigned to this Acc key on OBYC/OB40. and in case of duty on inventory, standard acc key NVV is assigned and no G/L assignment is carried out in OBYC/OB40.
    Reward if helpful.
    Thanks & Regards
    Kapil Nanda

  • What are the differences between Turn in Final Timesheet and the other option: Send Progress for Selected Tasks?

    Hello,
    The resource filled his/her timesheet in PWA. 
    Now : 
    What are the differences between Turn in Final Timesheet
    and the other option: Send Progress for Selected Tasks?
    Thanks

    You are partially correct and partially wrong.
    Turn
    in Final Timesheet sends
    the timesheet to the Timesheet Manager for Approval
    but task update always goes to Status manger of the task. Taks manager you can see in MPP(insert status manager field then check)
    Yes
    after approval progress will be available in MPP as well as in Projectweb app as % complete . 
    Send
    Progress for Selected Tasks 
    Send progress of selected task to status manager after approval update will be available in both MPP and Projectweb
    app as % complete.
    In Send
    Progress for Selected Tasks Timesheet
    Manager doesn't receive anything in his Approval center
    because all the update directly go to Status manager Approval center.
    Here you have to understand
    that there are two role Timesheet Manager(for timesheet approval) and Status manager(for task
    actual approval) 
    kirtesh

  • How to join three tables and practical difference between 10g and 11g

    I want to know with example how to outer join three different tables in Oracle.
    Also if you have any website or reference for understand syntax or performance difference between 10g and 11g then please paste a link in.thanks!!

    Hi,
    897293 wrote:
    I want to know with example how to outer join three different tables in Oracle.The 3rd table comes into the result set the same way the 2nd one did:
    FROM           table_1  t1
    LEFT OUTER JOIN      table_2  t2  ON   ...
    LEFT OUTER JOIN      table_3  t3  ON   ...The join condition(s) for t3 can reference t1, or t2, or both.
    Also if you have any website or reference for understand syntax or performance difference between 10g and 11g then please paste a link in.thanks!!The main manuals all have "What's New" sections near the beginning. For example:
    http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/wnsql.htm#sthref5
    Hoek,
    We've missed you. Welcome back!

  • Difference between 10g and 11g OEM

    Hi,
    I would like to know what is the difference between 10g and 11g Grid control. Unfortunately I have worked only on 11g Grid Control. So do not not what exactly are the differences like from GUI features,installation steps.
    Thank you....

    Hi,
    From 11g grid Weblogic also introduced. You can refer this below note for understanding even architecture.
    *Understanding the Enterprise Manager 10g and 11g Grid Control Management Agent, Directory Structure and Key Configuration Files. [ID 234872.1]*

  • Differences between Oracle 8i for a UNIX Platform and Oracle 8i for a Linux Platform

    Hello,
    J would like to know if there are some differences between Oracle 8i for a UNIX Platform and Oracle 8i for a Linux Platform.
    I know that there are some differences on Oracle 8i Parallel Server and i know that some products are not include like precompiler (Mod*Ada, Pro*FORTRAN) on a Linux Platform.
    Thank you.

    We have installed Oracle 8i on Solaris 8 and it had a great performance, of course that the hardware and licence invested here was costed my the office where i work. Personaly i'd installed linux reh hat 8 and oracle 8i, imagine that, it could be implemented by any individual that has the time to do so.
    By buyinng from a company that has a good background you could be sure that you will have support.
    Bottom line, if you have the $ to buy great hardware go for a unix platform. But if you don't a Red Hat Linux Server Licence with a 1 year sopport and Oracle data base is about 3500Dls.
    Visit www.red-hat.com
    Rewards... Bye

  • Differences between Oracle 8i for a UNIX Platform and a Linux Platform

    I want to know the differences between Oracle 8i for a UNIX Platform and Oracle 8i for a Linux Platform. And which platform is better?
    Thanks

    We have installed Oracle 8i on Solaris 8 and it had a great performance, of course that the hardware and licence invested here was costed my the office where i work. Personaly i'd installed linux reh hat 8 and oracle 8i, imagine that, it could be implemented by any individual that has the time to do so.
    By buyinng from a company that has a good background you could be sure that you will have support.
    Bottom line, if you have the $ to buy great hardware go for a unix platform. But if you don't a Red Hat Linux Server Licence with a 1 year sopport and Oracle data base is about 3500Dls.
    Visit www.red-hat.com
    Rewards... Bye

  • Difference between Reporting Services Sharepoint Mode and Reporting Services Add In for Sharepoint 2013

    Hi, We are building company site with Sharepoint 2013 Enterprise Edition and were wondering what is the difference between Reporting Services Sharepoint Mode and Reporting Services Add In for Sharepoint 2013? What are the roles/purposes of each one? What
    happens if only Reporting Services Sharepoint Mode  installed or vise versa.
    Thank you in advance

    Reporting Services in SharePoint mode is a service for displaying, managing, and creating SSRS reports within SharePoint. The addin is a pre-req for SharePoint that is used to display reports and is required for Reporting Services in Native or SharePoint
    mode, but does not by itself do anything.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Maybe you are looking for