Differences between Acrobat 8 and 9 for Comparing two document

Hi,
We have huge differences in Acrobat 8 and 9 while doing comparing the two document even both the text are identical. Acrobat 8 comparison document is very easy and effective when compare to Acrobat 9.
I have attached the Acrobat 9 and 8 comparison screenshots.
Can we have any other method in Acrobat 9 Professional to show exact text mismatch?
Thanks & Regards,
Sudhakar

Can any one help me in this regards?
Thanks in Advances
Sudhakar

Similar Messages

Visual Difference between acrobat 7 and 8

Hi All,
Facing visual difference between acrobat 7 and 8. Working on MAC.
1. Create pdf using compatability "Acrobat 7 (PDF 1.6). There is no visual differences, while open the pdf in Acrobat 8 and above (as like as Indesign)
2. But there is a visual differences in open the pdf in Acrobat 7 and below (Loss transperency)
[Note: But if I create the pdf using "Acrobat 4 (PDF 1.3)" there is no visual differences in any acrobat version.]
Please anyone give solution or advice.
Thanks in advance
Beginner_X

Hi Doc,
Thanks for your reply.
Could you tell where can I check the visual settings of installations.
Thanks
Beginner

What's the difference between Acrobat.exe and AcroRd32.exe?

What's the difference between Acrobat.exe and AcroRd32.exe?

acrobat.exe is part of Adobe Acrobat and acrord32.exe is part of Adobe Reader.

What is the difference between acrobat standard and acrobat pro?

what is the difference between acrobat standard and acrobat pro?

Simplest way to answer is with this link:
http://www.adobe.com/products/acrobatpro/buying-guide.html

Differences between reports LL01 and LS24 for negative stock

Dear friends,
Could you tell me the difference between the reports " Warehouse Activity Monitor" (LL01) and "Stock Per Material" (LS24)..
When the negative stock option is chosen ,LL01 is not displaying certain materials with the negative stock.However these materials with the negative stock are displayed in the report LS24.
What could be the reasons?
Thanks.
Regards,
Krishnan.

Hi
There are a couple of things to tell you here.
Firstly LS24 - This shows one material only and you will see where this material is all over the warehouse.
Secondly there is an alternative if you want to see all materials and that is LX02 and in the st type field put *** and you will see everything in the warehouse and if you sort on the available qty field (descending I think but try both) all of your negatives will come to the top of the screen with the largest negative first.
Thirdly LL01 This will only show negative stocks for the storage types that have been included in the configuration for this. Also the negatives in LL01 will only appear after the amount of time you have set in the congiguration whereas in LS 24 you will see them immediately.
So for instabce if you set st type XXX to show negatives after 24 Hours you will not see them in LL01 for 24 Hours but they will be in LS24 AND LX02 immediately.
This does not mean that LL01 is wrong just that youi need to make some adjustments in the config and be clear as to what you want to see and when.
I hope that this helps

Difference Between Using MVC And SwingUtilities For GUI Component Update

Hi Guys,
What are the difference of using the MVC (Model View Controler) pattern to update GUI and using the SwingUtilities of doing the same job?
Are there any big differences or shortcomings of any?
Thanks.

kap wrote:
Hi Guys,
What are the difference of using the MVC (Model View Controler) pattern to update GUI and using the SwingUtilities of doing the same job?
Are there any big differences or shortcomings of any?
Thanks.Your question is akin to asking, "What's the difference between using a car to get somewhere versus stepping on the gas pedal to do the same job?"
The use of SwingUtilities to update the "view" only pertains to updating components in a thread-safe manner, it has nothing to do with MVC. MVC would govern when the view gets updated (i.e. after the model changes), while SwingUtilties would be used to specify how the view gets updated.

Font rendering difference between Acrobat 8 and Acobat 9

We received a PDF file that looks fine in Acrobat 8 and in Preview but when opened in Acrobat 9 the lower half of many fonts is cut off. We see the problem on multiple computers, Mac and PC with both Acrobat Pro 9 and Reader 9. Is there anything that can be done in Acrobat 9 to make the file readable or would it have to be fixed on the creator side? See below for a sample of the problem.

Can you check your Acrobat Preferences for both versions and see if they are set the same in the area of Page Display > Rendering?
Is "Use Local Fonts" turned on or off?
Does the PDF print OK?

Differences between Acrobat 9 and Acrobat X at soft proof

Hi!
Under Mac OSX 10.8 there is a critical error on output preview.
A PDF with the ISOCoatedv2 colorprofil looks very different at Acrobat 9 Pro and Acrobat X Pro.
The preview in Photoshop, Illustrator and Acrobat 9 is correct.
The complete same file at Acrobat X Pro looks verry different! (in each app the simulation is on IsoCoatedv2)
on top the acrobat X Pro (red is to dark)
on the pic below is the correct one in Acrobat 9.
What can i do, that Acrobat X Pro shows me correct colors (the same whicht Acrobat 9 shows)?!

what fix? adobe must have changed the way they access/translate data to the monitor color space and didn't tell anyone about it. wouldn't have been the first time and sure wont be the last. no preference panel allows you access to those settings. leaving us with no choice but once again bow to adobes monopoly power.
how come microsoft got sued over a similar issue and adobe?
http://en.wikipedia.org/wiki/United_States_v._Microsoft
and those color management preferences got nothing to do with the way a pdf is rendered on your screen, that's only to describe items that don't have a profile attached (device colorspaces).
acrobat 11 does exactly the same. sorry to be the bearer of bad news.
just checked, the worse your monitor profile is, the bigger the display error. acrobat 11 (and i guess 10 as well) readjust the display. try changing the monitor profile in system preferences and watch acrobat 11 reset its display within a few seconds. it displays correctly for about half a second and than its back to some unrelated display mode.
thnaks for the great find!

DIfference Between OOPS ALV and WEBDYNPRO FOR ABAP ALV?

Hi to All,
i want some information that What is main difference when we develop ALV Report in OOPS and WEBDYNPRO For ABAP.which is good n in what way it is good?
In the Same way I m also want know that WHICH IS BETTER AMONG WEBDYNPRO FOR JAVA/ABAP.In which way?
Regards,
Ravi K

Thanku for ur valuble Information.
could u give me information regarding OOPS ALV and WEBDYNPRO FOR ABAP ALV?which is better?is there differences?
Edited by: ravi k on Mar 26, 2008 12:23 PM

Difference between FRU 44C3928 and FRU 44C3931? Two DIMM

Hey All,
I'm trying to figure out what the difference is between FRU 44C3928 and FRU 44C3931. I recently bought a T61P (6458-5KU) off of Craigslist and unfortunately I have the dreaded 42W76W3 Planar. The gentlemen before me only had 1 DIMM populated so he never experienced the problem but unfortunately as soon as I upgraded to 4GB's and populated both DIMM's I did.
I haven't tried calling Lenovo for a replacement since the unit is out of warranty, I'm still willing to try though! However, to cover all my bases I've turned to eBay to find a new Planar, on eBay there are currently 44C3928's for about $200 while the 44C3931's are going for $350
I'm hoping someone here can tell what the difference is and if I buy the 44C3928 will I have any issues installing it into the case or booting into Windows.
Thanks in advance!

Hi Christopher1580,
Welcome to Lenovo Community!
As per the query we understood that you are looking for replacement of System board for your ThinkPad T430.
I am sorry to inform you that the FRU part number which you have provided is not showing the FRU list, you can check with the FRU link for ThinkPad T430.
I request you to provide the system MTM (Machine Type Model) number so that we can provide complete details on that.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

What are the differences between Acrobat 8 and XI?

I currently work with Adobe 8 and I'm experiencing difficulties with some types of PDF's. PDF's with Layar or links (interactive ones). Also forms do not work at their best. I would like to upgrade to XI, but my boss is not convinced that it is necessary. I'm looking for a list of improvements or new features compared from 8 to XI. Can you help me with that?

Hi BValk ,
Thank You for posting on the forums. Kindly refer to the link mentioned below for further feature comparison. The chart has a comparison of 9, 10, 11.
http://www.adobe.com/in/products/acrobatstandard/buying-guide-version-comparison.html
Also, as mentioned by"Test Screen Name" we have declared End of Life for Acrobat 8.
Thanks,
Vikrantt Singh

Differences between SAP BO and SAP for Iphone

Hi,
Can someone tell me where I can see the relation of the releases between SAP Business one and the SAP BO for Iphone. Now testing, the stock of an item, the Iphone application is tell me that the release of the SAP server is not compatible with this funcitionality and I have to upgrade.
The point is that I just upgrade the customer, form 2007 to 8.8 PL19, and I don't really know if I only have to upgra the B1i and in which PL, or I have to meka the upgrade of all the components of SAP BO.
the release of the SAP for Iphone implemented is 1.2.0.
Thanks,
Cristian Moreno

Hi Cristian,
the recent docu for the App should give you the relevant info ([http://service.sap.com/sapidp/011000358700000483052011E/B1_MobileApp_Guide.pdf|http://service.sap.com/sapidp/011000358700000483052011E/B1_MobileApp_Guide.pdf]).
These latest functions of Version 1.2.0 (like stock per warehouse) of our SAP Business One Mobile Application require SAP Business One backend on Minor Release 8.81, Patch Level 05.
For reasons of backward compatibility mentioned system info has been installed.
regards, peter

Differences between CS5.5 and CS6 for iOS development and export?

I am just curious how Flash Pro CS5.5 is compromised in this regard.
And is it possible to make up any differences by installing an SDK or update package?
Thanks

Thanks
Why does it have better performance specifically? ... Because of the Air Compiler being newer?
Would it be possible to get the same improvements by doing an "overlay" install of the newer SDK for Air as outlined here....?
http://www.yeahbutisitflash.com/?p=2949

Can someone explain the difference between photos app and iphoto for iphone?

I recently downloaded the iphoto app to my iPhone 4s. I am hoping to clear up some space on my iphone and I deleted some pics from what I thought was the camera roll within iphoto. I noticed later that while attempting to change my wallpaper, I noticed that pics I thought I deleted were still on the phone as evidenced by their availability to be used as wallpaper. I checked that I had selected cameral roll and not photostream, where it would make sense the photos would still be there. When I left settings I noticed that I have iphoto and the phots app on my iphone. Do I need both? And if i want to delete photos, do I need to delete photos from the cameral roll within iphoto AND the photos app???? I really need someone to make sense of all this photo business!

The "Photos" application is built into the phone and is meant only for viewing and making small edits (crop, auto-enhance, etc.) to photos in your Camera Roll and other photos synced onto your phone via iTunes.
iPhoto for iOS is a new application which is meant to allow you to organize your photos, share them via sideshows or "journals" and make mode substantial edits (contrast, brightness, sharpness, photo effects, etc.)
Keep in mind that iPhoto or any other app from the App Store does not have the ability to delete photos from your Camera Roll. What you did is probably hit the x icon which hides the photo from your iPhoto library but it remains in your Camera Roll. To delete photos, they must be deleted from the Photos app. Oce they are deleted from your Camera Roll they will no longer show up in iPhoto.

Difference between batch quantity and quantity for sale

Hi all,
I have created a batch in system with weight 340 KG. However, when I make a sales order for that batch, the system picks only 188 KG of it. There is no reserved/blocked etc quantity for the batch. Can you please help me identify where I might be going wrong?

Base Quantity - Quantity of the material to be produced to which the standard values of the operation refer.
Operation Quantity - Quantity planned for this operation.
Base quantity and operation quantity may not always be the same, if we have partial lots delivered during the sequence of operations, the operation quantity will be equal to the lot delivered during the operation.
Base quantity is dependent on the BOM, where it signifies the total quantity of output after using the components of certain quantity.
Hope this may help you.

Differences between Acrobat 8 and 9 for Comparing two document

Similar Messages

Maybe you are looking for