Differences between Acrobat Pro 9 and XI.

What happened to the stamp option from Acrobat Pro 9 to Acrobat Pro XI? I find that 9 seems to have had more features and looked better. Am I missing something? Is there a product that is more like 9?

Version 9 didn't have more features, but it certainly looks different. The
Stamp tool moved under the Comment panel on the right, and many of the
other tools moved to the Tools panel in the same location.
On Thu, Jan 15, 2015 at 4:56 PM, christineb92455063 <

Similar Messages

  • What is the difference between acrobat standard and acrobat pro?

    what is the difference between acrobat standard and acrobat pro?

    Simplest way to answer is with this link:
    http://www.adobe.com/products/acrobatpro/buying-guide.html

  • What's the difference between Acrobat.exe and AcroRd32.exe?

    What's the difference between Acrobat.exe and AcroRd32.exe?

    acrobat.exe is part of Adobe Acrobat and acrord32.exe is part of Adobe Reader.

  • Visual Difference between acrobat 7 and 8

    Hi All,
    Facing visual difference between acrobat 7 and 8. Working on MAC.
    1. Create pdf using compatability "Acrobat 7 (PDF 1.6). There is no visual differences,  while open the pdf in Acrobat 8 and above (as like as Indesign)
    2. But there is a visual differences in open the pdf in Acrobat 7 and below (Loss transperency)
    [Note: But if I create the pdf using "Acrobat 4 (PDF 1.3)" there is no visual differences in any acrobat version.]
    Please anyone give solution or advice.
    Thanks in advance
    Beginner_X

    Hi Doc,
    Thanks for your reply.
    Could you tell  where can I check the visual settings of installations.
    Thanks
    Beginner

  • Difference between Mac Pro and Mac XServer

    Hi,
    I wanted to know if there is any difference between Mac Pro and the Mac XServer - at the OS level? Meaning, if I design an application on Mac Pro would it run seamlessly on XServer or do I need to care about a few things.
    Please advise.
    Thanks,
    Abhishek

    Both Mac OS X and Mac OS X Server are presently at the Tiger 10.4.10 release, with Mac OS X Server having various added pieces and features, and having a few structural and configuration differences.
    * Do both of them support the ipv6 protocol
    Yes; both Mac OS X and Mac OS X Server both offer IPv6.
    * do both of them support LDAP and PAM based authentication
    Mac OS X and Mac OS X Server have LDAP support, yes. Mac OS X Server has LDAP authentication, DNS and a variety of other servers built in. Mac OS X is configured as a client, though there is the Apache web server.
    Haven't looked for PAM for either platform.
    * Do both of them support the same level of Java ( I understand we need 1.5 or higher for Tiger / Leapord)
    Java itself is the same on both Mac OS X and Mac OS X Server, though Mac OS X Server has server-oriented pieces of Java present. And it's still write once, debug everywhere.
    No Leopard questions are permissible here at this time; Leopard details are NDA.
    * Do the compilers (gcc) have different compilation options - maybe xServer uses some better optimized flags that handle large volumes of data and network traffic.
    AFAIK, there are no differences in gcc defaults. Nor would I expect any. Handling volumes of data is left to the programmer. (I'm not even sure how a compiler author would even implement that sort of difference.)
    * Is there any difference in the behavior of the way the libraries ...
    I'd expect the exact same behavior the programmer requested would occur with both platforms.
    Now as for what I expect is the root of your question, yes, you'll likely want to test your application on both Mac OS X and Mac OS X Server software platforms. There can exist very hard to predict details such as cases where dual NICs or the aforementioned directory differences that have tossed a few applications off the rails and into the weeds; have caused applications to fail.
    You can choose to install Mac OS X Server on a Mac Pro. Probably the 10-client, because you probably aren't planning to serve piles of clients from the Mac Pro.
    An overview of Mac OS X Server is here:
    http://www.apple.com/server/macosx/specs.html
    Now as to whether or not I would expect run-time differences, no. But I've been at this way too long and have chased way to many weird bugs to make any promises here.

  • Is there a difference between Logic Pro and Logic Pro X?

    Maybe this is a stupid question, but is there a difference between Logic Pro and Logic Pro X?
    Already thx!

    Hi
    Short answer: No
    Longer answer:
    Logic Pro X is the latest release version of the DAw known as "Logic Pro". Previous versions were: Logic Pro 9, Logic Pro 8 etc.
    There was also a "Logic Express" (no longer available) which, though similar to Logic Pro, was missing a few features of Logic Pro in it's later versions)
    This might add more details:
    http://en.wikipedia.org/wiki/Logic_Pro
    CCT
    edit
    AoS wrote similarly
    There you go then :-)

  • Difference between Reader, Pro and Preview

    I'm running Leopard 10.5.7 with Preview. I also have Acrobat Reader 9.1 and Acrobat Pro 9.2 installed. What is the difference between the 3 programs? My default when opening PDF's from Safari is Acrobat Pro. I can open PDF's just fine with Pro. But when I launch the Reader it asks me if I want to use that program as the default.
    I also like the ability to use the built-in Preview function because it seems to use less resources (ram) than Acrobat Pro.
    Can someone explain the difference of the 3 programs and what the advantages of one over the other are?
    I create PDF's all the time with In Design and know that with Reader I can't save any changes to the PDF I can only print and read from them.
    Do I even need Reader installed or is this overkill?

    I would say it depends on what (if anything) you need to do when viewing the PDF files in one of those 3 applications.
    Acrobat Pro: Provides useful tools in examining the document as well as making some basic corrections. These tools include Output Preview (color warnings, ink viewing, object inspector) and Preflight.
    Preview: Has some limitations when viewing documents. Most notably, overprinting cannot be simulated but there may be others. Some transparency blending modes are displayed quite as expected either.
    Reader: Lighter weight than Acrobat Pro, but I am not aware of any viewing limitations as compared with Acrobat Pro (and it does support simulating overprinting in viewing)

  • Difference between Soundtrack Pro and the version that came with FCE 3.5

    Would like to know what the important differences are between Soundtrack Pro 2 and v1.5 that shipped with Final Cut Express 1.5.

    I would say it depends on what (if anything) you need to do when viewing the PDF files in one of those 3 applications.
    Acrobat Pro: Provides useful tools in examining the document as well as making some basic corrections. These tools include Output Preview (color warnings, ink viewing, object inspector) and Preflight.
    Preview: Has some limitations when viewing documents. Most notably, overprinting cannot be simulated but there may be others. Some transparency blending modes are displayed quite as expected either.
    Reader: Lighter weight than Acrobat Pro, but I am not aware of any viewing limitations as compared with Acrobat Pro (and it does support simulating overprinting in viewing)

  • Differences between Acrobat 8 and 9 for Comparing two document

    Hi,
    We have huge differences in Acrobat 8 and 9 while doing comparing the two document even both the text are identical. Acrobat 8 comparison document is very easy and effective when compare to Acrobat 9.
    I have attached the Acrobat 9 and 8 comparison screenshots.
    Can we have any other method in Acrobat 9 Professional to show exact text mismatch?
    Thanks & Regards,
    Sudhakar

    Can any one help me in this regards?
    Thanks in Advances
    Sudhakar

  • DVD Rendering and Burning: differences between Premiere Pro and Premiere Elements

    I am landscape photogapher and wish to either create slide shows in Premerie or import them to Premiere  from H264 1080 quicktime files generated by Ligthroom 3.  I do not do frame by frame video editing.  My only goal in using Premiere is to be able to render and/or burn DVD's and eventually Bluetooh compatible DVD's for play back on commercial flat panel TV's, e.g., Samsung flat panel dvd's.
    Are the DVD rendering and burning capablity of Pemiere CS5 Pro and Premiere 9 Elements equivalent , i.e, are that both as likely to produce DVD's that render with natural color on commercial flat panel TV's?
    My prior experience is that my Lightroom generated 1080, H264 quicktime movies  have perfectly natural color on Mac LCD and other computer monitors but see very over saturated color on commecial flat panel tv's. 
    Discussions with Adobe tech support folks are contradictory on this matter.

    The main differences between the authoring capabilities (the assembly of DVD/BD, navigation and Menus, plus burning) of Encore (the authoring program, that ships and installs with PrPro) and PrE 9 are:
    1.) Encore is a full-featured authoring program, offering a lot more power and flexibility, but at the expense of having to do it "by hand," where PrE 9 is very limited in the navigation that can be employed, and it uses Menu Sets for that automation. Though PSD's, like the Menus in Encore, they have many special aspects, that must be considered, when doing any customization.
         A.) In Encore, one can create almost all sorts of navigation in the DVD/BD, limited almost exclusively to the limits imposed by the DVD, or BD specs.
         B.) PrE 9 will allow Autoplay, with no Menu, or will automatically create Scene Menus, per the Chapter Markers that you add - and that is ALL. There will      be no Into AV material. No Subtiltes. No supplemental Audio streams. Only linear navigation, or no navigation.
         C.) Menus for Encore are much more easily customized, where there are some major conventions in those from PrE, that MUST be addressed.
    2.) Encore can Burn an Image (ISO) - no Image in PrE, and can Burn a BD to Folder, which cannot be done in PrE - only for DVD.
    3.) Encore offers the capability to adjust Layer Breaks for DL discs.
    4.) Encore allows one to adjust the Burn speed, and in PrE, one is stuck with the "fastest" based on the speed of the media + the burner
    5.) Encore allows output to a Flash delivery with pretty much full navigation.
    6.) Encore allows for changes in the Subpicture Highlight Color Sets, and PrE will only do that, with some Menu Set editing.
    7.) Encore offers a SlideShow feature, but I feel that it is rudimentary and limited, and assemble mine in PrPro, then go to Encore for authoring.
    8.) Encore is a separate program, though interfaces with PrPro with ADL (Adobe Dynamic Link), and is NOT available as a stand-alone any more - only with      PrPro.
    There are probably more differences, and some of the above might not make any difference to you. Things can probably be summed up as: Encore = great power and flexibility, but with things being done manually, and PrE lacks the power and flexibility, but is semi-automatic, so probably easier to use on simple Projects.
    Good luck, and hope this helps you make the decision,
    Hunt
    [Edit] Sorry that some of the formatting for the Outline did not translate well. Gotta' explore the Outline formatting in the editing screen more, 'cause it would probably have fixed things. Sorry about that.

  • Font rendering difference between Acrobat 8 and Acobat 9

    We received a PDF file that looks fine in Acrobat 8 and in Preview but when opened in Acrobat 9 the lower half of many fonts is cut off. We see the problem on multiple computers, Mac and PC with both Acrobat Pro 9 and Reader 9. Is there anything that can be done in Acrobat 9 to make the file readable or would it have to be fixed on the creator side? See below for a sample of the problem.

    Can you check your Acrobat Preferences for both versions and see if they are set the same in the area of Page Display > Rendering?
    Is "Use Local Fonts" turned on or off?
    Does the PDF print OK?

  • Differences between Acrobat 9 and Acrobat X at soft proof

    Hi!
    Under Mac OSX 10.8 there is a critical error on output preview.
    A PDF with the ISOCoatedv2 colorprofil looks very different at Acrobat 9 Pro and Acrobat X Pro.
    The preview in Photoshop, Illustrator and Acrobat 9 is correct.
    The complete same file at Acrobat X Pro looks verry different! (in each app the simulation is on IsoCoatedv2)
    on top the acrobat X Pro (red is to dark)
    on the pic below is the correct one in Acrobat 9.
    What can i do, that Acrobat X Pro shows me correct colors (the same whicht Acrobat 9 shows)?!

    what fix? adobe must have changed the way they access/translate data to the monitor color space and didn't tell anyone about it. wouldn't have been the first time and sure wont be the last. no preference panel allows you access to those settings. leaving us with no choice but once again bow to adobes monopoly power.
    how come microsoft got sued over a similar issue and adobe?
    http://en.wikipedia.org/wiki/United_States_v._Microsoft
    and those color management preferences got nothing to do with the way a pdf is rendered on your screen, that's only to describe items that don't have a profile attached (device colorspaces).
    acrobat 11 does exactly the same. sorry to be the bearer of bad news.
    just checked, the worse your monitor profile is, the bigger the display error. acrobat 11 (and i guess 10 as well) readjust the display. try changing the monitor profile in system preferences and watch acrobat 11 reset its display within a few seconds. it displays correctly for about half a second and than its back to some unrelated display mode.
    thnaks for the great find!

  • Question about Hz difference between MacBook Pro and iMac?

    Some will think I'm crazy for saying this, but my new MacBook is driving me nuts.
    In a nutshell, I have tinnitus as a result of an accident some years ago. I can hear an intermittent high pitch sound coming from the back left of the machine. I used to hear a similar sound from old TVs back when I first got tinnitus. After some deduction I realised that it was to do (I think) with the fequency. I sold my old TV and brought a new one that was a 100Hz. My theory was somewhat confirmed when they delivered it and it was the 50Hz version and yes, the high pitch sound was very evident! Upon receipt of the 100Hz model and I immediately noticed the difference.
    I'm guessing then that the MacBook has something inside emitting 50-60Hz - someone on this forum mentioned that too.
    Although I want the portability, I can't stand that sound all day long, so I'm thinking of taking it back and swapping it for an iMac.
    The question is, will I find the same problem? I'm not sure of the technical specifications in terms of Hz's between the two machines.
    It's too noisy in the shop to tell.
    Any advice appreciated.
    PS - did not have this issue with my 2008 MacBook pro.
    PPS - makes no difference if it's plugged in or not.

    Isolating the source of the high frequency would take a technician with the instruments to deteermine what components emit sound...actually very easy to do with the proper test instruments, but essential to tell you what is causing the offending sound.  Unless you know that it will be very hard to determine if the iMac will not do the same thing.
    Only qualitative way to find out is go to an Apple store or reseller with a good selection of hardware, work with the different hardware and see if it bothers you.  Preferably with few people around and low background noise level so the sound isn't masked.

  • Can someone tell me the difference between adobe pro and adobe captivate 8?

    Hi i am wanting to purchase a new Adobe product but don't know which one I need!!
    I am a student and also have access to teacher discounts as well... All I want to do is turn PDF's in to a word document!!
    can you please advise if any of these will do it or
    do I need to buy the pro???
    thanks

    Adobe Acrobat or Microsoft Word.
    If you are either a student or a teacher..It worries me that you are asking this in a professional video editing software forum!!!!

  • Difference between Logic Pro and Logic Express?

    A buddy wants me to show him how to use Logic Express. I'm fairly up on Logic Pro, have used it for years. I'm wondering if I can get a trial version of Express to try out for an hour before embarrassing myself in front of him?
    Or if there is a huge amount of difference in the basic setup?

    There is very little difference, mostly in content (Jampacks, Waveburner, Mainstage..and a few of the high end plugins). Other than that they're functionally identical. same audio engine, you wouldn't know the difference just by looking at them.
    pancenter-

Maybe you are looking for

  • PowerBook G4 can't find printer via Airport

    All of a sudden my G4 laptop (Leopard) can't find my printer, Canon ip4200 using Airport. I deleted the printer and added it to my printer list. I rebooted. Nothing works. However, when I connect directly to the laptop, the printer works. Any suggest

  • Updating to IOS 5 - "Device isn't eligible for the requested build." SOLUTION

    After two days of struggling to update to IOS 5. Here is how I made it work... I continuously got this error message: Here is how I was able to get past this roadblock & update my iPhone4 & iPad2 from 4.3.5 to 5.0. Be sure your iTunes is up-to-date 1

  • Published web galleries not available as web widgets in iWeb

    hi all. sorry some are experiencing probs with iWeb '08. It does seem to have some bugs, but man it is cool for my uses! I have published a web gallery in iPhoto, but when I go to insert it in my iWeb through the Insert Menu up top or through the web

  • Total result  & formula result  is wrong in query out put

    Hi BW gurus I have issue with total result and formula result my requirement Formula for hours is ( total time / Counter / 60) hours  column displaying    14.2      2.4      3.4 Total - 5.6   not  20    then I setp calculate results to SUM  now total

  • How can I arrange the Open window by Date Created?

    You've already seen my question. The Open window does show Date Modified, but nothing I've tried will allow me to change it or to add Date Created as a column. Any help would be greatly appreciated. Thanks, Ben