Differences between driver version 2.6 and 2.7?

We have a device that works under DOS using an NI-PC2 with the 2.6 drivers but will not work under DOS or WindowsNT with the 2.7 drivers. The device (using the latter case) receives the command (a little red light comes on to let the user know it is being operated remotely) but just sits there. I'm asserting the EOI (at least I think I am) when I set up the device. Do I have to set up the card to assert the EOI as well? I'm just perplexed as to why it works with the older card and drivers and not the newer card and drivers.
Any advice or help would be appreciated. Thanks!

According to http://www.ni.com/support/gpib/versions.htm, This GPIB card is only supported under the 2.6 version of the DOS driver. It is not suupported under Windows NT.
The 488.2 version of the board is supported in Windows 9x/ME under the 1.60 version of the Windows driver.
Randy Solomonson
Application Engineer
National Instruments

Similar Messages

Functional transactional difference between SAP version 4.7 and ECC 6.0

Hi Experts,
Can you Pls tell the Functional transactional difference between SAP version 4.7 and ECC 6.0 in case of Sales and Distribution module.
Like VA05n is one transactional difference,Pls tell the others?
Regards,
Rohan

Hi,
there are lot of changes like i observe
1, in rebates there is no advanced rebate processing in 4.7
2. there is no scale group field in condrecords of agrement in rebate agreement.
3. there are lot of new reports available in SIS
4. in sales returns process also seperate config available in 6.0
regards,
sk

Difference between SAP version 4.7EE and ECC 6.0.

Hi All,
Could you please tell me the major difference between SAP version 4.7EE and ECC 6.0? Also let me know why the industries should go for ECC 6.0?
Waiting for an early response from you.
Thanks a lot in advance!

http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx
Please use above mentioned link, you will find the delta functionalities between various SAP Versions.
Regards,
Ravi

Difference between Standard versions 7.0 and 8.0

I am about to purchase a Fujitsu scanner that comes with Adobe Standard. I have a chance to buy a refurbished one for about $100 less that comes with STandard version 7.0 vs. the new versions of the product which come with Standard 8.0. I am not sure that i know the difference between the two. Can anyone point me out to a comparison document that highlights the diffs?
Thanks,
chief Jay

Acrobat 8 has all of the features of 7 plus some like creating a PDF from multiple files, reviewing...etc.
Both versions are out of date with version 9 though.

Input Tax - difference between sap version 4.7 and version 5

Hi All
I done total customising of input tax on sap version 4.7 as well as version 5.
now I want to enter following invoice through t.code F-43:-
   Raw Material Cost                           50,000.00
Add:- Excise                                       8,000.00
Add:- E.Cess                                          240.00
Add:- Vat                                             2329.60
So we are to pay to vendor Rs. 60,569.60.
Now when use sap version 4.7 & run t.code F-43, then if I enter Rs. 60,569.60 against g.l of vendor & purchase, then system accept it.
But when I use sap version 5 & run t.code F-43, then I have to enter Rs. 60,569.60 against g.l of vendor & Rs. 50,000 against g.l of purchase, then only system accept the entry.
why so. Plz clarify
With Regards
Deepak Garg
Mob 9213784161

Hi,
there are lot of changes like i observe
1, in rebates there is no advanced rebate processing in 4.7
2. there is no scale group field in condrecords of agrement in rebate agreement.
3. there are lot of new reports available in SIS
4. in sales returns process also seperate config available in 6.0
regards,
sk

Difference Between ERP SAP 6.0 and previous versions

What are the differences between SAP version 6.0 and previous versions?

hi Kranthi,
Check
Differences b/n 4.6c,4.7 and ECC 5.0
ABAP 4.6B,4.7,ECC 5.0 diffrence ?
Difference between SAP 4.7 and ECC 5.0 and 6.0

Difference between SAP-CRM 2007 UI and previous version UI.

hi,
anyone knows the differences difference between SAP-CRM 2007 UI and previous version UI.
anykind of links or files are helpful.
regards.
raman.

Hi,
actually quite a late response and I think all the rather technically focuses comments have already been given, incl. the link to a really good slide deck, that explains all the technical architecture details on what exactly we did.
From an end user perspective some other statements on what we did:
(1) From an information architecture and visualization perspective we acted based on feedback from our customers in the last years, which led to some restructuring of the screen, e.g. moving the navigation bar from the top area of the screen (horizontal) to the left hand side --> sounds simple but users tend to have problem seeing thing at the top of the screen. We also decided to arrange the information for e.g. an account or an opportunity not in a tab oriented format. Again usability tests in CRM had shown that users often find it hard to see and understand that tabs contain additional information. We now show the details in assignment blocks below the header information in a scrollable format. Vertical scrolling is a behavior of a screen that most users know from their internet experience. Those are just two exampels of what we did in this area
(2) We also have put a large focus on well known web behaviors, like drag & drop and personalization in general, knowing that on the one hand side, no matter what standard UI we deliver, users tend to adapt it exactly based on their needs and wishes. So you will find really easy to understand personalization options everywhere in the new CRM Web Client UI. To achieve this we used lots of web 2.0 techologies that enable especially these easy interactive capabilitites.
(3) Finally, and this relates directly to the arguments mentioned in (2) we focused as well on really easy UI configuration. Again, in every customer project user interface changes are made, to adapt the SAP default to the customers needs. here we invested a lot to make the 60-80% most common UI changes done in projects as easy as possible, that even non-technical people can generally do it (like Power users).
Hope this clarifies some arguments what from the users point of view has been done and what the advantages are.
When you follow the same link as mentioned by Nadine above, you can also find a presentation UI Concept, which explains all the details rather from a users perspective.
Best regards and enjoy the new UI ..and every feedback is very much welcome, only with your feedback we can improve the solution even more.
Ingo

Difference between garage band on appstore and bundled version

Hi to everybody, does anyone know what's the difference between the version of garage band on app store and the one I have found already installed on my mac mini? Version number is the same.. I wonder if I pay for more functions or sounds. Thank you

sdutz wrote:
what's the difference between the version of garage band on app store and the one I have found already installed on my mac mini?
none, they are the same

I recently received a WD My Book Studio external Hard drive and am installing it but can't figure out what the difference between wd turbo installer 64 and wd turbo installer is. Can someone tell me. Thanks in advance for all your help.

I recently received a WD My Book Studio external Hard drive and am installing it but can't figure out what the difference between wd turbo installer 64 and wd turbo installer is. Can someone tell me. Thanks in advance for all your help.

Oh ok, well that was what the test said prior to reformatting the hard drive. Now, it doesn't find any trouble no matter how many times I run it. That's what has me so confused, everything seems to check out and yet...I can't do anything, not even install the software!

Difference between Hyperion version 11.1.1.3 and epm 11.1.2.1

Hi,
Can anybody suggest me the difference between Hyperion version 11.1.1.3 and EPM 11.1.2.1?
Thanks In Advance

Take a look at the “Installation and Configuration Guide.”
log file..start the server and see the log file
The 11.1.2.1 release also includes new features for upgrading from previous versions. There are several new utilities and enhancements to make the upgrade process easier. You will see some of these new features during the configuration of the various products
Apart from diffrance
Ima not sure y Windows 2008 support in Hyperion 11.1.2 brought with it a host of new challenges..(atleast to make copyrighted windows copys now onwards lol)
Windows 2008 introduced a new feature called User Access Control (UAC). while installing person need to have admin privillage other wise it HELL (nightmare ) and some unexpectedly problematic issues though security is good but .................
Have a read on this
oracle-hyperion-epm-system-certific-131801.xls(google u will get it) at least u get some idea what are new hardware req and software reqs
Some Support answers as well
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=TROUBLESHOOTING&id=1313155.1#aref3
hope u get some idea

What is the difference between the 2011 airport extreme and the old version

As per title if any one can help. What is the difference between the 2011 airport extreme and the old version

According to the FCC reports, there is a significant difference in the power output of the g/n radios at both 2.4 and 5ghz.
Follow the following links, then select the "Report" for each.
Previous Version...
http://goo.gl/B8PIu
Current Verison Version...
http://goo.gl/3yKRl
Previous model...
freqency range      mode                  output power dbm      output power watts
2412-2462            802.11b               24.57                        286.42
2412-2462            802.11g               21.56                        143.22
2412-2462            802.11n(ht20)       21.17                        130.92
5745-5825            802.11a               23.07                         202.77
5745-5805            802.11n(ht20)       22.17                         164.82
5755-5795            802.11n(ht40)       21.44                         139.32
New Version...
2412-2462            802.11b               24.10                         257.04
2412-2462            802.11g               24.88                         307.61
2412-2462            802.11n(ht20)       24.11                         257.63
5745-5825            802.11a               25.14                          326.59
5745-5805            802.11n(ht20)       25.28                          337.29
5755-5795            802.11n(ht40)       25.94                          392.64
This should mean a fairly significant increase in range with the new model. I would imagine these changes would be consistent with the Time Capsule as well.

What is difference between Oracle version and DB version.

What is the difference between Oracle version and DB Version?
How we came to know about the installed version through SQL query.

SQL> select * from v$version;
BANNER
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
PL/SQL Release 8.1.7.0.0 - Production
CORE 8.1.7.0.0 Production
TNS for Linux: Version 8.1.7.0.0 - Development
NLSRTL Version 3.4.1.0.0 - Production
SQL>
Joel P�rez

Difference between production version and routing

hello pp experts,
                        why do we create production version, and what's the difference between production version and routing?

Dear sarfaraz lodhi ,
Production version is a combination of BOM & Routing in the case of Discrete Manufacturing and it's a
combination of BOM & Rotuing/Rate Routing in the case of Repetitive Manufacturing.
Created either through MM02 by selecting MRP4 view or else through C223
A production version determines the various production techniques that can be used to produce a material.
It defines the following information:
·        Alternative BOM for a BOM explosion
·        Task list type, task list group, and group counter for assignment to task lists
·        Lot-size restrictions and period of validity
A material can have one or more production versions.
Routing contains the set of operation that's required for producing a product either a HALB - Semi-
Finished product or else a FERT - Finished Product.
The T code for creating Routing is CA01.
Regards
Mangalraj.S
Edited by: Mangalraj.S on Sep 24, 2008 10:27 AM

Difference between Planning Version and Simulation Version

Hi friends,
What is the difference between Planning Version and Simulation Version?
Thanks,
Debi

Debi
There are a lot of threads in this forum that give detailed info about version concept. Also you can refer to help.sap.
Anyways , planning version is the version against which your live cache data is stored. The data against this version is the one that the planners and buyers are going to refer to or use to make their planning and buying decisions. Data against the planning version is nothing but data relevant to the business .
There may be instances where you would like to simulate some scenario. If you want to do trial and error analysis and at the same time if you do not want to impact the actual business data , then you create simulation versions and simulate your scenario.
For example your actual sales orders received for the month of March may be 100 CS. This is the actual number that will be stored against your planning version. Lets say the demand planner wants to find out what will be the impact if there is a sudden bulk demand from a new customer for 500 CS - that is if he wants to do a what - if analysis then he can create a simulation version and try to check the impact .
Thanks
Aparna

Differences between different versions of BW 2.1C,3.0A and 3.5

Can anybody tell me the differences between different versions of BW.
I m new to SAP BW,i directly learned in BI7.0.So please anybody let me know the difference in implementation of features in 2.1C, 3.0A ,3.5 ,if possible BI7.0 also

please read this:
http://help.sap.com/saphelp_nw70/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm

Differences between driver version 2.6 and 2.7?

Similar Messages

Maybe you are looking for