Differences between ECC 6.0, 4.7 and 4.6
I want to know about the additional features of ECC6.0 when compared with teh older versions...Where can i find the related documentation...Dont say that it is in the release notes...as i have seen many new transactions which are not documeted in the release notes for the differences between 6.0 and 4.6...And, i dont see 4.7 as an option in the release notes...Any ideas....I will award maximum points for the perfect answer(s).
Thanks,
Difference between SAP Versions
Hi,
You can find the difference in release notes of each SAP version.
Here are the links.
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Hope this helps.
Regards,
Rajesh Banka
Reward suitable points.
How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left. You also get a point yourself for rewarding (one per thread).
Similar Messages
-
Hi All,
Is there any difference between R/3 4.7 version and ECC 5.0 for the transaction RSA5.
Regards,
AndyAndy
Functionality wise I didn't see any difference other than new datasources in ECC5.0
Thnaks
Sat -
Difference between ECC 6.0 and earlier versions
Hi,
one of the difference between ECC 6.0 and earlier versions is that instead 'WS_UPLOAD' and 'WS_DOWNLOAD' in ECC we should use 'GUI_UPLOAD' and 'GUI_DOWNLOAD' respectively.
(of course SPDD and SPRO tcodes is known by everone i suppose)
Similarly can u all put down some differences here, atleast one entry by each, I think we can make a good docu. I have searched the net for the differences but could not get much, so by each of us contributing one each, it would become good docu..for all of us.
Thanx in advanceUnicode Errors Encountered and their Solutions
E1. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified.
Error:
OPEN DATASET FILE FOR OUTPUT IN TEXT MODE.
Solution:
OPEN DATASET FILE FOR OUTPUT IN LEGACY TEXT MODE.
E2. In Unicode, DESCRIBE DISTANCE can only be used with the IN BYTE MODE or IN
CHARACTER MODE addition.
Error:
DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIEBO01 INTO BPOS.
Solution:
DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIENR01 INTO BPOS
IN CHARACTER MODE.
E3. u201CUSR02-UFLAGu201D must be a byte-type field (Typ X or XSTRING )
Error:
IF USR02-UFLAG O YULOCK.
Solution: Since the data type of USR02-UFLAG is type INT and is compared with data type
X u2013 Hence the error. So we define a new variable ZULOCK and assign the
value of USR02-UFLAG to ZULOCK.
New variable
DATA: ZULOCK(1) TYPE X. "APBRP00
Assign value
ZULOCK = USR02-UFLAG.
Compare -
IF ZULOCK = YULOCK. u201Creplace IF USR02-UFLAG O YULOCK.
E4. HT cannot be converted to a Character type field
Error :
WRITE ht TO t_data+10(2).
Solution : Since the data type of ht is a type u2018Xu2019 and the data is been transfer to
t_data which has a data type u2018Cu2019. value of one data type cannot be copy to
another data type where one of them is type string .Hence the error occur,
so the data type of ht is been change to Type u2018Cu2019
OR
A Tab ( value 09 ) is introduced as part of the row. The value 09 is not converted in Unicode environment. Instead we need to use class
Error:
DATA: BEGIN OF ht,
x(1) TYPE x VALUE '09',
END OF ht.
Solution:
Define Class after the Tables definition.
CLASS cl_abap_char_utilities DEFINITION LOAD.
Data Defination : Comment internal table HT and define a variable HT type C.
* Insert + APRIA00 05/02/2007 Unicode project
* DATA: BEGIN OF ht,
* x(1) TYPE x VALUE '09'
* END OF ht.
* Insert - APRIA00 05/02/2007 Unicode project
DATA HT type C.
Before using HT assign Horizontal tab.
Ht = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E5. In Unicode programs the u201C#u201D cannot appear in names, as it is does here in the name u201C#LINESu201D
Error :
#LINES TYPE I,
Solution : Since the # is used in the start of name, it is not allowed. We need to
remove it.
Solution for the above
V_LINES TYPE I,
E6. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified as well as the addition was required FOR OUTPUT,FOR INPUT, FOR APPENDING OR FOR UPDATE was expected.
Error:
OPEN DATASET PATH_NAME IN TEXT MODE.
Solution:
Download = OPEN DATASET PATH_NAME FOR OUTPUT IN LEGACY TEXT MODE.
Upload = OPEN DATASET AUSZUG-FILE IN TEXT MODE FOR INPUT ENCODING DEFAULT.
E7. u201CTABu201D must be a character-type data object( data type C,N, D, T or String). Field string)
Error:
data: begin of tab, "Excel Parameter Split at TAB
t type x value '09', "Tabulator
end of tab.
concatenate 'Material' 'Package Status'
into z_download-line separated by tab.
( In the above command the two field are to be separated with a horizontal Tab. The earlier way of assigning the tab value u201809u2019 will not work in Unicode environment.
Solution:
Define a class just after the Table defination.
CLASS cl_abap_char_utilities DEFINITION LOAD.
Define variable Tab as shown below :
Data : TAB TYPE C.
Before the concatenate statement assign the value of Tab using pre-defined attributes.
TAB = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E8. Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not Unicode-
enabled; use the class cl_gui_frontend_services
Error-1: Function WS_DOWNLOAD is obsolete in Unicode environment.
call function 'WS_DOWNLOAD'
exporting
filename = zfilename
tables
data_tab = z_download.
Solutions-1: Instead of WS_DOWNLOAD use GUI_DOWNLOAD.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
* BIN_FILESIZE =
FILENAME = zfilename
TABLES
DATA_TAB = z_download.
E9. The "/" character is reserved for identification of namespaces. It must be entered twice.
The name of a namespace must be at least 3 characters long.
Error :
U/N(3) TYPE C, "U/N --> ERSETZT DURCH SPACE
Solution :
* Special character can not be used to define a data variable
* U/N(3) TYPE C, "U/N --> ERSETZT DURCH SPACE
U_N(3) TYPE C, "U/N --> ERSETZT DURCH SPACE
* Insert - APSUS02 07/02/2007 Unicode Project
E10. "LP_TAB" and "CS_TAB" are not mutually convertible. In Unicode programs,
"LP_TAB" must have the same structure layout as "CS_TAB", independent of the length
of a Unicode character.
Error : This error is encountered when data from one internal table is copied to another
internal table which different structure. In this case its LP_TAB & CS_TAB.
LP_TAB[] = CS_TAB[].
Solution :
* Replace + APSUS02 07/02/2007 Unicode Project
* LP_TAB[] = CS_TAB[].
move-corresponding CS_TAB to LP_TAB.
* Replace + APSUS02 07/02/2007 Unicode Project
E11. Could not specify the access range automatically. This means that you need a RANGE
addition.
Error : Range need to be specified as an addition to the command.
DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1).
Solution :
DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1)
* Insert + APSUS02 07/02/2007 Unicode Project.
RANGE ABCD+0(4).
* Insert - APSUS02 07/02/2007 Unicode Project.
E12 . Processing Terminated Error code: Error in opening /
Path not found when downloading to Unix directory.
Error : PARAMETER: outfile(92) DEFAULT
'/CP/interface/NPP/data/MX/cbslaprcpts'
LOWER CASE,
kmxmstrd AS CHECKBOX.
This error is encountered when the path is missing. The above path is related to CCP.
Solution: For testing purpose comment the original path and replace it with
/CP/interface/CCD/Unicode_test/
E13. Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not Unicode- enabled; use the class cl_gui_frontend_services
Error: Function WS_UPLOAD is obsolete in Unicode environment. (During UCCHECK)
Call function 'WS_UPLOAD'
Exporting
Filename = zfilename
Filetype = u2018DATu2019
Tables
data_tab = z_upload
Exceptions
Conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
gui_refuse_filetransfer = 8
others = 9.
Solution: Instead of WS_UPLOAD use TEXT_CONVERT_XLS_TO_SAP. Do not use temporary file put the file name as it is.
1) First define a type pool and a variable of type truxs_t_text_data.
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
2) Use this it_raw in the function module in parameter i_tab_raw_data. Put file name and the internal table in the function module.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
* I_FIELD_SEPERATOR =
* i_line_header = ' '
i_tab_raw_data = it_raw " WORK TABLE
i_filename = zfilename
TABLES
i_tab_converted_data = z_upload[] "ACTUAL DATA
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
Comment u201Ci_line headeru201D. It takes the first/ header line of the file which is to be uploaded.
Put square brackets after internal table as shown above.
E14. CURSORHOLD may not be converted into a number.
Error: GET CURSOR LINE CURSORHOLD VALUE CURSOR_HOLD.
Solution: In the declaration part of CURSORHOLD, one field is of u2018Pu2019 type and one field is of u2018Iu2019 type, which is not allowed in Unicode environment.So change the the type of it to NUMC. -
Difference Between ECCS and BCS
Hello Everyone
Can any one explain briefly the difference between ECCS and BCS.
Your response will be highly appreciated.
Regards.
DCQuick answer: EC-CS is on the R/3 platform, while BCS is on the BI platform.
This topic has been discused numerous times - please search the forum for more details if required. -
Difference between ecc 4.0 and 6.0
Hello,
Please can someone tell me wht is the difference between ecc 4.0 and 6.0 in relation with BW.Like how will BW be affected with the change.
the other ques is that can we work on ECC 4.0 with BI7 ot BI7 will only work on ecc 6.0. Please can someone explain me tht.
thanksFor Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.0 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you. -
Difference between Ecc 5.0 and Ecc 6.0 SAP note number
Hello Friends,
Is any one knows difference between Ecc 5.0 and Ecc 6.0 version released SAP notes for FICO module.
Thanks in advance for your help
Thanks,
RatnamHi,
Check these
Technical difference between 4.7 and ECC 5.0
difference between sapr/3 4.7 and sapr/3 ecc 5.0
Differences b/n 4.6c,4.7 and ECC 5.0
Regards
vijay -
Difference between ECC 5.0 and SAP 4.7
Hi,
Can anyone please explain the difference between ECC 5.0 and SAP 4.7 from ABAP point of view? What is the full form of ECC?
Best wishes,
AtanuHi,
Check these
Technical difference between 4.7 and ECC 5.0
difference between sapr/3 4.7 and sapr/3 ecc 5.0
Differences b/n 4.6c,4.7 and ECC 5.0
Regards
vijay -
Difference between ECC 5.0 and ECC 6.0
Hi all,
What are the generic differences between ECC 5.0 and ECC 6.0.
If usefull i will assign the points
thanks in advance
venuhttp://solutionbrowser.erp.sap.fmpmedia.com/
http://service.sap.com/releasenotes
http://service.sap.com/upgrade -
Difference between ECC 6.0 & SAP 4.7
Hi
Can anybody help in explaining the difference between ECC 6.0 and SAP 4.7. I wanted the detailed difference between these two.
You can reach me at [email protected]
Thanks & Regards
NisadHi,
Did you search using Solution Browser. This will display the delta functionality. Access is at -
http://solutionbrowser.erp.sap.fmpmedia.com/
Cheers ! -
Difference between ECC 4.7, 5, 6.0
Can anybody provide some useful links highlighting the differences between ECC 4.7,5 and 6.0 versions?
Thanks in advance.
PinkeyHi,
You can find the difference in release notes of each SAP version.
Here are the links.
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Hope this helps.
Thanks,
Viswanath -
Difference between using app server connection pooling and using the driver
Hi all,
How to get connection pooling with out application server and tomcat also?
What is the difference between using app server connection pooling and using the driver supported connection pooling?
Regards,
Muralimaybe the performance of App server pool is better than the JDBC pool,
for you don't know wether the implementation of the JDBC interface is good or bad. -
What the difference between u0093Valuate GL Account Open Itemsu0094 and u0093Valuate G/
hi gurus
What the difference between Valuate GL Account Open Items and Valuate G/L Account Balances?
We found out that when we perform valuate GL account Open items there will be reversal done at the same time whereas when we perform Valuate G/L Account Balances there is NO reversal posting even though we hv entered the reversal posting date and Period.
Pls advise which one we should perform?Valuate GL Account Open Items are for open item managed accounts including vendor/customer accounts. The valuation is performed for each (open) line items on key date specified.
"Valuate GL Balance" is for account NOT managed on Open Item basis but managed in foreign currency. The period balance of key date in foreign currency is valuated. Reversal document can be created by selecting 'Reverse postings' in "Postings" tab.
Kyoko -
Difference between the design of clusters PCLx and others like RFBLG etc .
There are a few nagging questions which I was not able to find in the forum hence i have to post a new question.
I am a little confused about the difference between the different clusters .
If i start with RFBLG i.e. the cluster for BSEG BSEC etc ,I can see that the tables which are part of this cluster
can be viewed through different methods like
1) whr usd list for RFBLG
2) dd02l table and give the required parameters there
now when I compare this with another so-called cluster PCL1 if find that PCL1 is not recognized as a cluster
and also I am not able to see the same in dd02l table when i give PCL1 and the tabtype as cluster which I was able to see
for the RFBLG ,there are other tables similar to RFBLG .
1) SO what is the difference between the RFBLG type of clusters and the PCLx type of cluster
2) are pclx and rfblg..type of clusters same ?
3) why does PCL1 shows that it is a transparent table ? where as rfblg shows in a diff way in se11
4) i know we access data from PCL1 using import and export stmts ,DO OR CAN WE DO THE SAME FOR RFBLG
5) I found that each and evry cluster table had diff fields ,this was kinda surprising for me as I had been thinking
that all cluster tables need to follow a certain rule ,SO WHO DECIDES THE FIELDS OF A TABLE CLUSTER ?
6) PCL1 has the index button enabled ,which again I think is not according to the cluster table rules?how?
7) I understand that we can save data in form of internal tables in the PCL1 cluster ,can we do the same in RFBLG ?
8) Can I think on lines that PCL1 and RFBLG type of cluster are two totally different types of data dictionary objects
and the usage and implementation of both of them is different and that the design and the BASE of both of such objects
is different .
I know this is a long list but I am sure that answers to these questions would really require some one who has really really work hard and invested a lot of time in understanding the dictionary system.I am awaiting a few answers ,few hints and a healthy discussion till we get them .
Thanks ...
aHello,
1/
BSEG is a typical Cluster Table.
This means that the physical table BSEG does NOT exist in the database, physical data for BSEG is stored in the database (table) cluster RFBLG.
In ABAP however you can perform selects on BSEG (with all fields from the SAP repository structure, see SE11 on BSEG), during execution the SAP database layer will translate these statements to physical selects in the RFBLG database table, so in ABAP this is transparant.
More info :
[http://help.sap.com/saphelp_nw04/helpdata/en/cf/21f083446011d189700000e8322d00/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/cf/21f083446011d189700000e8322d00/content.htm]
2/
PCL1, PCL2, ... are normal SAP transparent tables, however in HR they are often called HR cluster table.
Transparent tables are SAP objects where there is also a database table with the same name that contains the physical data.
However the PCL tables are somewhat different from normal transparent tables (data is compressed, external programs can not interpret the data, ...).
This means that in ABAP you can not use simple SQL statements to access data in PCL tables (because of compressed format).
In stead statements like EXPORT TO DATABASE and IMPORT FROM DATABASE need to be used.
More info :
[http://fuller.mit.edu/hr/cluster_tables.html|http://fuller.mit.edu/hr/cluster_tables.html]
Wim -
What is the difference between credit memo in invoice year and in next year
Hi!
I'm new here.I'm study SAP ERP.I don't know what is the difference between credit memo in invoice year and credit memo in next year (asset accounting).Can you show and give me an example, please!
Thanks and best regards!
Edited by: dinhtuan on Jun 28, 2010 3:10 PMHi,
Maybe have a look at the SAP Help for further information (http://help.sap.com) : e.g. 'Posting Credit Memos Integrated with Vendor' or 'Posting a Credit Memo Offset Against a Clearing Account'
Transaction type 105 for credit memo on current acquisition made in the current year, posting key 75. Or transaction type 160 for credit memo on acquisitions from prior years. posting key 75.
Note: determine if the asset was acquired in the current fiscal year or in a closed fiscal year (Display asset values).
If the asset was acquired in a fiscal year that is now closed, correct the past depreciation using a write-up (in that case check out and refer to Posting Write-Ups).
I hope this helps.
Kind regards,
Brigitte -
What is the difference between these two reports MC.1 and MB5L
Hi
what is the difference between these two reports MC.1 and MB5L?
what is the Purpose of each report?
Material ledger is activated for this plant, we found some amount difference between these two reports, my client accounting department used to compare these two reports while year end/month end closing
Thanks
RajuMC.1 will give you the report for plant analysis as per plant .
MB5L report will give you list of stock value as per G/L account wise.
Maybe you are looking for
-
Pages not loading properly. Flash problem ?
I updated my osx to 10.7.2 yesterday, everything works fine except some pages in safari wont load up. For example, facebook loads in this way (image attached). I have flash player installed and updated. Do i need to reinstall flash ? or put some othe
-
I am having trouble deleting files and folders after creating in the same .VI
I have a larger .VI that runs an automated balancing routine for a large rotating mass. The test needs to create some folders and files so that as the rest is run multiple times, there is a way to track how units did under test and when they were te
-
How to move all files but X to Y
It doesn't really matter if it's in the terminal or if it's a applescript but I need to know how to: Move all files in a dictionary but a few named.
-
Predefined the Transaction S_ALR_87012284
Hello, if you open the Transaction S_ALR_87012284 you will find on the tab outputcontrol the field scope compression. In these field is figure 2 predefined. I want to predefined the figure 3. Is this possible to predefined this field with figure 3?
-
Officejet 8100e prints test page only
New computer add to network, windows 8, network printer located on this computer, other work stations xp, installed printer to xp stations over network, prints test page fine, no other software prints to the printer. Updated firmware to printer, upda